! Started logfile: J1736-1944_S_2017_02_19_pus_uvs.log on Sat May 4 18:56:11 2019 obs J1736-1944_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1736-1944_S_2017_02_19_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.563029 visibilities/baseline/integration-bin. ! Found source: J1736-1944 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 11452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1736-1944_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 371 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 422 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 426 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 693 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992198Jy sigma=0.006804 ! Fit after self-cal, rms=0.944726Jy sigma=0.006491 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.395 mas, bmaj=6.676 mas, bpa=-5.817 degrees ! Estimated noise=1567.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449291 Jy ! Component: 100 - total flux cleaned = 0.0549854 Jy ! Total flux subtracted in 100 components = 0.0549854 Jy ! Clean residual min=-0.004107 max=0.004382 Jy/beam ! Clean residual mean=0.000001 rms=0.001075 Jy/beam ! Combined flux in latest and established models = 0.0549854 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0549854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100539Jy sigma=0.000645 ! Fit after self-cal, rms=0.099667Jy sigma=0.000638 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=7.509 mas, bpa=-4.749 degrees ! Estimated noise=1086.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637414 Jy ! Component: 100 - total flux cleaned = 0.00954728 Jy ! Component: 150 - total flux cleaned = 0.0113135 Jy ! Component: 200 - total flux cleaned = 0.0123641 Jy ! Total flux subtracted in 200 components = 0.0123641 Jy ! Clean residual min=-0.002641 max=0.002967 Jy/beam ! Clean residual mean=0.000003 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0673495 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.0673495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099216Jy sigma=0.000636 ! Fit after self-cal, rms=0.099134Jy sigma=0.000635 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 1.02 KP 1.03 ! LA 1.06 MK 1.09 NL 0.92 OV 1.03 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.05 HN 1.19 KP 0.96 ! LA 0.97 MK 1.00 NL 1.05 OV 1.08 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.03 HN 1.02 KP 0.97 ! LA 0.79 MK 1.09 NL 1.00 OV 0.96 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.99 HN 0.78 KP 1.00* ! LA 0.88 MK 1.04 NL 1.00* OV 0.98 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.099134Jy sigma=0.000635 ! Fit after self-cal, rms=0.096102Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.581 mas, bpa=-4.536 degrees ! Estimated noise=1081.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138237 Jy ! Component: 100 - total flux cleaned = 0.000139359 Jy ! Component: 150 - total flux cleaned = 0.00013925 Jy ! Component: 200 - total flux cleaned = 0.000179918 Jy ! Total flux subtracted in 200 components = 0.000179918 Jy ! Clean residual min=-0.002877 max=0.002870 Jy/beam ! Clean residual mean=0.000002 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 0.0675295 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.0675295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096090Jy sigma=0.000634 ! Fit after self-cal, rms=0.096047Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096047Jy sigma=0.000633 ! Fit after self-cal, rms=0.096301Jy sigma=0.000633 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.905 mas, bmaj=7.575 mas, bpa=-4.361 degrees ! Estimated noise=1083.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028388 Jy ! Component: 100 - total flux cleaned = 0.000285031 Jy ! Component: 150 - total flux cleaned = 0.000304082 Jy ! Component: 200 - total flux cleaned = 0.000321941 Jy ! Total flux subtracted in 200 components = 0.000321941 Jy ! Clean residual min=-0.002711 max=0.002467 Jy/beam ! Clean residual mean=0.000002 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0678514 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 43 components and 0.0678514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096293Jy sigma=0.000633 ! Fit after self-cal, rms=0.096321Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000157469 Jy ! Component: 100 - total flux cleaned = 0.00015759 Jy ! Component: 150 - total flux cleaned = 0.000175401 Jy ! Component: 200 - total flux cleaned = 0.00020979 Jy ! Total flux subtracted in 200 components = 0.00020979 Jy ! Clean residual min=-0.002693 max=0.002468 Jy/beam ! Clean residual mean=0.000002 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0680612 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0680612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096314Jy sigma=0.000632 ! Fit after self-cal, rms=0.096317Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096317Jy sigma=0.000632 ! Fit after self-cal, rms=0.096630Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.903 mas, bmaj=7.545 mas, bpa=-4.3 degrees ! Estimated noise=1080.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109011 Jy ! Component: 100 - total flux cleaned = 9.00239e-05 Jy ! Component: 150 - total flux cleaned = 9.03026e-05 Jy ! Component: 200 - total flux cleaned = 0.000122392 Jy ! Total flux subtracted in 200 components = 0.000122392 Jy ! Clean residual min=-0.002410 max=0.002442 Jy/beam ! Clean residual mean=0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0681836 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.0681836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096624Jy sigma=0.000632 ! Fit after self-cal, rms=0.096682Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.04717e-06 Jy ! Component: 100 - total flux cleaned = 1.82533e-05 Jy ! Component: 150 - total flux cleaned = 5.01948e-05 Jy ! Component: 200 - total flux cleaned = 6.54138e-05 Jy ! Total flux subtracted in 200 components = 6.54138e-05 Jy ! Clean residual min=-0.002448 max=0.002301 Jy/beam ! Clean residual mean=0.000001 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.068249 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.068249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096677Jy sigma=0.000632 ! Fit after self-cal, rms=0.096681Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096681Jy sigma=0.000632 ! Fit after self-cal, rms=0.096778Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.961 mas, bmaj=14.89 mas, bpa=2.832 degrees ! Estimated noise=1429.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356397 Jy ! Component: 100 - total flux cleaned = 0.000381417 Jy ! Component: 150 - total flux cleaned = 0.000409096 Jy ! Component: 200 - total flux cleaned = 0.000424939 Jy ! Total flux subtracted in 200 components = 0.000424939 Jy ! Clean residual min=-0.002919 max=0.002418 Jy/beam ! Clean residual mean=-0.000000 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.068674 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 49 components and 0.068674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096780Jy sigma=0.000632 ! Fit after self-cal, rms=0.096809Jy sigma=0.000631 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.71456e-05 Jy ! Component: 100 - total flux cleaned = 7.04805e-05 Jy ! Component: 150 - total flux cleaned = 8.78122e-05 Jy ! Component: 200 - total flux cleaned = 0.000103301 Jy ! Total flux subtracted in 200 components = 0.000103301 Jy ! Clean residual min=-0.002938 max=0.002389 Jy/beam ! Clean residual mean=-0.000000 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0687773 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 50 components and 0.0687773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096812Jy sigma=0.000632 ! Fit after self-cal, rms=0.096814Jy sigma=0.000631 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.524 mas, bpa=-4.228 degrees ! Estimated noise=1078 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 7.524 at -4.228 degrees (North through East) ! Clean map min=-0.0023128 max=0.058546 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.438 mas, bmaj=6.673 mas, bpa=-5.296 degrees ! Estimated noise=1563.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0453442 Jy ! Component: 100 - total flux cleaned = 0.0556892 Jy ! Component: 150 - total flux cleaned = 0.0601128 Jy ! Component: 200 - total flux cleaned = 0.062766 Jy ! Total flux subtracted in 200 components = 0.062766 Jy ! Clean residual min=-0.003974 max=0.003861 Jy/beam ! Clean residual mean=-0.000001 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.062766 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.062766 Jy ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.524 mas, bpa=-4.228 degrees ! Estimated noise=1078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323527 Jy ! Component: 100 - total flux cleaned = 0.00472376 Jy ! Component: 150 - total flux cleaned = 0.00503169 Jy ! Component: 200 - total flux cleaned = 0.00521407 Jy ! Total flux subtracted in 200 components = 0.00521407 Jy ! Clean residual min=-0.002503 max=0.002410 Jy/beam ! Clean residual mean=0.000001 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.06798 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 30 components and 0.0679801 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.961 mas, bmaj=14.89 mas, bpa=2.832 degrees ! Estimated noise=1429.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627182 Jy ! Component: 100 - total flux cleaned = 0.000653067 Jy ! Component: 150 - total flux cleaned = 0.000671902 Jy ! Component: 200 - total flux cleaned = 0.000687944 Jy ! Total flux subtracted in 200 components = 0.000687944 Jy ! Clean residual min=-0.002971 max=0.002393 Jy/beam ! Clean residual mean=-0.000000 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.068668 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.50476e-05 Jy ! Component: 100 - total flux cleaned = 2.20062e-05 Jy ! Component: 150 - total flux cleaned = 3.49786e-05 Jy ! Component: 200 - total flux cleaned = 4.73495e-05 Jy ! Total flux subtracted in 200 components = 4.73495e-05 Jy ! Clean residual min=-0.002968 max=0.002397 Jy/beam ! Clean residual mean=-0.000000 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0687153 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0687153 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=7.524 mas, bpa=-4.228 degrees ! Estimated noise=1078 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00030132 Jy ! Component: 100 - total flux cleaned = -0.00027352 Jy ! Component: 150 - total flux cleaned = -0.0002755 Jy ! Component: 200 - total flux cleaned = -0.00027642 Jy ! Total flux subtracted in 200 components = -0.00027642 Jy ! Clean residual min=-0.002447 max=0.002346 Jy/beam ! Clean residual mean=0.000001 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.0684389 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0684389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096826Jy sigma=0.000632 ! Fit after self-cal, rms=0.096825Jy sigma=0.000632 wmodel J1736-1944_S_2017_02_19_pus_map.mod ! Writing 42 model components to file: J1736-1944_S_2017_02_19_pus_map.mod wobs J1736-1944_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1736-1944_S_2017_02_19_pus_uvs.fits wwins J1736-1944_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J1736-1944_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000698344 Jy ! Component: 100 - total flux cleaned = -0.00104544 Jy ! Component: 150 - total flux cleaned = -0.00121125 Jy ! Component: 200 - total flux cleaned = -0.00148937 Jy ! Component: 250 - total flux cleaned = -0.00156539 Jy ! Component: 300 - total flux cleaned = -0.00156467 Jy ! Component: 350 - total flux cleaned = -0.00167556 Jy ! Component: 400 - total flux cleaned = -0.00163919 Jy ! Component: 450 - total flux cleaned = -0.00178233 Jy ! Component: 500 - total flux cleaned = -0.00181748 Jy ! Component: 550 - total flux cleaned = -0.00192159 Jy ! Component: 600 - total flux cleaned = -0.00205788 Jy ! Component: 650 - total flux cleaned = -0.00219175 Jy ! Component: 700 - total flux cleaned = -0.00225785 Jy ! Component: 750 - total flux cleaned = -0.00232302 Jy ! Component: 800 - total flux cleaned = -0.0023866 Jy ! Component: 850 - total flux cleaned = -0.00244935 Jy ! Component: 900 - total flux cleaned = -0.00244882 Jy ! Component: 950 - total flux cleaned = -0.00247974 Jy ! Component: 1000 - total flux cleaned = -0.00247981 Jy ! Component: 1050 - total flux cleaned = -0.00254106 Jy ! Component: 1100 - total flux cleaned = -0.00251081 Jy ! Component: 1150 - total flux cleaned = -0.00257021 Jy ! Component: 1200 - total flux cleaned = -0.00254101 Jy ! Component: 1250 - total flux cleaned = -0.00257075 Jy ! Component: 1300 - total flux cleaned = -0.00265626 Jy ! Component: 1350 - total flux cleaned = -0.00262786 Jy ! Component: 1400 - total flux cleaned = -0.00265634 Jy ! Component: 1450 - total flux cleaned = -0.00260048 Jy ! Component: 1500 - total flux cleaned = -0.00265525 Jy ! Component: 1550 - total flux cleaned = -0.00257369 Jy ! Component: 1600 - total flux cleaned = -0.00262815 Jy ! Component: 1650 - total flux cleaned = -0.00270854 Jy ! Component: 1700 - total flux cleaned = -0.00270823 Jy ! Component: 1750 - total flux cleaned = -0.00270808 Jy ! Component: 1800 - total flux cleaned = -0.00265617 Jy ! Component: 1850 - total flux cleaned = -0.00273394 Jy ! Component: 1900 - total flux cleaned = -0.00275907 Jy ! Component: 1950 - total flux cleaned = -0.00273395 Jy ! Component: 2000 - total flux cleaned = -0.00285906 Jy ! Component: 2050 - total flux cleaned = -0.00280926 Jy ! Component: 2100 - total flux cleaned = -0.00290792 Jy ! Component: 2150 - total flux cleaned = -0.00285955 Jy ! Component: 2200 - total flux cleaned = -0.00300463 Jy ! Component: 2250 - total flux cleaned = -0.00302898 Jy ! Component: 2300 - total flux cleaned = -0.00312393 Jy ! Component: 2350 - total flux cleaned = -0.00317086 Jy ! Component: 2400 - total flux cleaned = -0.00321746 Jy ! Component: 2450 - total flux cleaned = -0.00326325 Jy ! Component: 2500 - total flux cleaned = -0.00333125 Jy ! Component: 2550 - total flux cleaned = -0.00335408 Jy ! Component: 2600 - total flux cleaned = -0.00335398 Jy ! Component: 2650 - total flux cleaned = -0.00339902 Jy ! Component: 2700 - total flux cleaned = -0.00344319 Jy ! Component: 2750 - total flux cleaned = -0.00355307 Jy ! Component: 2800 - total flux cleaned = -0.00364015 Jy ! Component: 2850 - total flux cleaned = -0.00359662 Jy ! Component: 2900 - total flux cleaned = -0.00359664 Jy ! Component: 2950 - total flux cleaned = -0.00363936 Jy ! Component: 3000 - total flux cleaned = -0.00368173 Jy ! Component: 3050 - total flux cleaned = -0.00374472 Jy ! Component: 3100 - total flux cleaned = -0.0037032 Jy ! Component: 3150 - total flux cleaned = -0.00374442 Jy ! Component: 3200 - total flux cleaned = -0.00378544 Jy ! Component: 3250 - total flux cleaned = -0.00382619 Jy ! Component: 3300 - total flux cleaned = -0.00386645 Jy ! Component: 3350 - total flux cleaned = -0.00392675 Jy ! Component: 3400 - total flux cleaned = -0.00394636 Jy ! Component: 3450 - total flux cleaned = -0.00396594 Jy ! Component: 3500 - total flux cleaned = -0.00392684 Jy ! Component: 3550 - total flux cleaned = -0.00392692 Jy ! Component: 3600 - total flux cleaned = -0.00404281 Jy ! Component: 3650 - total flux cleaned = -0.00396616 Jy ! Component: 3700 - total flux cleaned = -0.00394719 Jy ! Component: 3750 - total flux cleaned = -0.00398508 Jy ! Component: 3800 - total flux cleaned = -0.00406031 Jy ! Component: 3850 - total flux cleaned = -0.00391097 Jy ! Component: 3900 - total flux cleaned = -0.00402223 Jy ! Component: 3950 - total flux cleaned = -0.00400379 Jy ! Component: 4000 - total flux cleaned = -0.00391255 Jy ! Component: 4050 - total flux cleaned = -0.00398517 Jy ! Total flux subtracted in 4096 components = -0.00402124 Jy ! Clean residual min=-0.000972 max=0.001061 Jy/beam ! Clean residual mean=-0.000001 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.0644177 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 341 components and 0.0644177 Jy ![Exited script file: muppet] wmap "J1736-1944_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 7.524 at -4.228 degrees (North through East) ! Clean map min=-0.0018468 max=0.058502 Jy/beam ! Writing clean map to FITS file: J1736-1944_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0585025 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000328784 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.686 1.686 3.372 6.744 13.488 26.976 53.952 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.058 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 7.524 at -4.228 degrees (North through East) ! Clean map min=-0.0018468 max=0.058502 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1736-1944_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:56:15 2019