! Started logfile: J1733-1304_X_2017_02_19_pus_uvs.log on Sat May 4 21:46:00 2019 obs J1733-1304_X_2017_02_19_pus_uva.fits ! Reading UV FITS file: J1733-1304_X_2017_02_19_pus_uva.fits ! AN table 1: 32 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.60625 visibilities/baseline/integration-bin. ! Found source: J1733-1304 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 858 lines of history. ! ! Reading 10476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1733-1304_X_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.737358Jy sigma=0.012926 ! Fit after self-cal, rms=1.727833Jy sigma=0.012868 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0668% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.6345 mas, bmaj=1.754 mas, bpa=-4.08 degrees ! Estimated noise=1344.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.8239 Jy ! Component: 100 - total flux cleaned = 2.3903 Jy ! Total flux subtracted in 100 components = 2.3903 Jy ! Clean residual min=-0.109093 max=0.279150 Jy/beam ! Clean residual mean=0.000634 rms=0.029957 Jy/beam ! Combined flux in latest and established models = 2.3903 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 2.3903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.665786Jy sigma=0.004921 ! Fit after self-cal, rms=0.664973Jy sigma=0.004914 ! Inverting map ! Your choice of large map pixels excluded 0.0668% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.338704 Jy ! Component: 100 - total flux cleaned = 0.546646 Jy ! Total flux subtracted in 100 components = 0.546646 Jy ! Clean residual min=-0.073661 max=0.107123 Jy/beam ! Clean residual mean=0.000268 rms=0.016861 Jy/beam ! Combined flux in latest and established models = 2.93695 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 2.93695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.387195Jy sigma=0.002783 ! Fit after self-cal, rms=0.384140Jy sigma=0.002765 ! Inverting map ! Your choice of large map pixels excluded 0.0668% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Added new window around map position (0, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13362 Jy ! Component: 100 - total flux cleaned = 0.216941 Jy ! Total flux subtracted in 100 components = 0.216941 Jy ! Clean residual min=-0.059987 max=0.050277 Jy/beam ! Clean residual mean=0.000121 rms=0.013442 Jy/beam ! Combined flux in latest and established models = 3.15389 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 3.15389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.326874Jy sigma=0.002306 ! Fit after self-cal, rms=0.325606Jy sigma=0.002299 ! Inverting map ! Your choice of large map pixels excluded 0.0668% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.0668% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.7826 mas, bmaj=1.976 mas, bpa=-1.524 degrees ! Estimated noise=936.672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552269 Jy ! Component: 100 - total flux cleaned = 0.0829587 Jy ! Component: 150 - total flux cleaned = 0.0975151 Jy ! Component: 200 - total flux cleaned = 0.101813 Jy ! Total flux subtracted in 200 components = 0.101813 Jy ! Clean residual min=-0.058415 max=0.061845 Jy/beam ! Clean residual mean=0.000057 rms=0.017317 Jy/beam ! Combined flux in latest and established models = 3.2557 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 3.2557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.316987Jy sigma=0.002227 ! Fit after self-cal, rms=0.316484Jy sigma=0.002225 ! Inverting map ! Your choice of large map pixels excluded 0.0668% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.98 KP 0.97 ! LA 1.01 MK 1.00 NL 1.03 OV 0.98 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.02 KP 0.97 ! LA 1.01 MK 1.01 NL 1.03 OV 0.98 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.01 KP 0.98 ! LA 1.04 MK 1.02 NL 1.02 OV 0.98 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.98 KP 0.98 ! LA 1.04 MK 1.01 NL 1.03 OV 0.97 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.95 KP 0.97 ! LA 1.03 MK 1.03 NL 1.03 OV 0.99 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.97 KP 0.97 ! LA 1.03 MK 1.01 NL 1.03 OV 0.96 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 0.96 KP 0.97 ! LA 1.00 MK 1.03 NL 1.03 OV 0.96 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.96 KP 0.98 ! LA 1.02 MK 1.01 NL 1.03 OV 0.97 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 0.97 KP 0.98 ! LA 1.03 MK 1.00 NL 1.02 OV 0.97 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00 HN 1.00 KP 0.98 ! LA 1.01 MK 1.02 NL 1.03 OV 1.01 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.98 KP 0.98 ! LA 1.00 MK 1.01 NL 1.03 OV 1.00 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.96 KP 1.06 ! LA 1.03 MK 1.01 NL 1.03 OV 1.00 ! PT 1.00* SC 1.02 ! ! ! Fit before self-cal, rms=0.316484Jy sigma=0.002225 ! Fit after self-cal, rms=0.296961Jy sigma=0.002053 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.7854 mas, bmaj=1.978 mas, bpa=-1.511 degrees ! Estimated noise=937.823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168592 Jy ! Component: 100 - total flux cleaned = 0.000377936 Jy ! Component: 150 - total flux cleaned = -0.000279086 Jy ! Component: 200 - total flux cleaned = -0.000548112 Jy ! Total flux subtracted in 200 components = -0.000548112 Jy ! Clean residual min=-0.068542 max=0.051352 Jy/beam ! Clean residual mean=0.000075 rms=0.015364 Jy/beam ! Combined flux in latest and established models = 3.25515 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 42 components and 3.25515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.295683Jy sigma=0.002045 ! Fit after self-cal, rms=0.295339Jy sigma=0.002043 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.295339Jy sigma=0.002043 ! Fit after self-cal, rms=0.139227Jy sigma=0.000994 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.7846 mas, bmaj=1.973 mas, bpa=-1.615 degrees ! Estimated noise=937.197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133153 Jy ! Component: 100 - total flux cleaned = 0.0151968 Jy ! Component: 150 - total flux cleaned = 0.0154567 Jy ! Component: 200 - total flux cleaned = 0.0156941 Jy ! Total flux subtracted in 200 components = 0.0156941 Jy ! Clean residual min=-0.022733 max=0.024441 Jy/beam ! Clean residual mean=0.000109 rms=0.005635 Jy/beam ! Combined flux in latest and established models = 3.27085 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 3.27085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.137548Jy sigma=0.000981 ! Fit after self-cal, rms=0.137362Jy sigma=0.000979 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 9.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247475 Jy ! Component: 100 - total flux cleaned = 0.039775 Jy ! Component: 150 - total flux cleaned = 0.0506809 Jy ! Component: 200 - total flux cleaned = 0.058844 Jy ! Total flux subtracted in 200 components = 0.058844 Jy ! Clean residual min=-0.018657 max=0.019337 Jy/beam ! Clean residual mean=0.000091 rms=0.004937 Jy/beam ! Combined flux in latest and established models = 3.32969 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 86 components and 3.32969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132374Jy sigma=0.000936 ! Fit after self-cal, rms=0.132067Jy sigma=0.000934 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132067Jy sigma=0.000934 ! Fit after self-cal, rms=0.116541Jy sigma=0.000805 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.7839 mas, bmaj=1.973 mas, bpa=-1.587 degrees ! Estimated noise=936.502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00925736 Jy ! Component: 100 - total flux cleaned = 0.0151761 Jy ! Component: 150 - total flux cleaned = 0.0201608 Jy ! Component: 200 - total flux cleaned = 0.0235433 Jy ! Total flux subtracted in 200 components = 0.0235433 Jy ! Clean residual min=-0.015477 max=0.020438 Jy/beam ! Clean residual mean=0.000062 rms=0.003524 Jy/beam ! Combined flux in latest and established models = 3.35323 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 3.35323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115167Jy sigma=0.000792 ! Fit after self-cal, rms=0.115020Jy sigma=0.000791 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1, 10.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193625 Jy ! Component: 100 - total flux cleaned = 0.03014 Jy ! Component: 150 - total flux cleaned = 0.0384122 Jy ! Component: 200 - total flux cleaned = 0.0452044 Jy ! Total flux subtracted in 200 components = 0.0452044 Jy ! Clean residual min=-0.013859 max=0.015491 Jy/beam ! Clean residual mean=0.000047 rms=0.002978 Jy/beam ! Combined flux in latest and established models = 3.39844 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 3.39844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111631Jy sigma=0.000758 ! Fit after self-cal, rms=0.111552Jy sigma=0.000757 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Added new window around map position (-0.4, 24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155142 Jy ! Component: 100 - total flux cleaned = 0.024532 Jy ! Component: 150 - total flux cleaned = 0.0319795 Jy ! Component: 200 - total flux cleaned = 0.0378662 Jy ! Total flux subtracted in 200 components = 0.0378662 Jy ! Clean residual min=-0.012882 max=0.012991 Jy/beam ! Clean residual mean=0.000020 rms=0.002511 Jy/beam ! Combined flux in latest and established models = 3.4363 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 140 components and 3.4363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108906Jy sigma=0.000736 ! Fit after self-cal, rms=0.108783Jy sigma=0.000735 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Added new window around map position (1, 2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00866292 Jy ! Component: 100 - total flux cleaned = 0.0127289 Jy ! Component: 150 - total flux cleaned = 0.017932 Jy ! Component: 200 - total flux cleaned = 0.022659 Jy ! Total flux subtracted in 200 components = 0.022659 Jy ! Clean residual min=-0.011371 max=0.009193 Jy/beam ! Clean residual mean=0.000008 rms=0.002217 Jy/beam ! Combined flux in latest and established models = 3.45896 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 155 components and 3.45896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107081Jy sigma=0.000721 ! Fit after self-cal, rms=0.106906Jy sigma=0.000720 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106906Jy sigma=0.000720 ! Fit after self-cal, rms=0.106450Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=2.05 mas, bmaj=3.79 mas, bpa=3.627 degrees ! Estimated noise=1284.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136987 Jy ! Component: 100 - total flux cleaned = 0.0241174 Jy ! Component: 150 - total flux cleaned = 0.0327231 Jy ! Component: 200 - total flux cleaned = 0.0399531 Jy ! Total flux subtracted in 200 components = 0.0399531 Jy ! Clean residual min=-0.011194 max=0.012868 Jy/beam ! Clean residual mean=-0.000012 rms=0.003165 Jy/beam ! Combined flux in latest and established models = 3.49892 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 173 components and 3.49892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105818Jy sigma=0.000712 ! Fit after self-cal, rms=0.105674Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0075838 Jy ! Component: 100 - total flux cleaned = 0.0132757 Jy ! Component: 150 - total flux cleaned = 0.0175498 Jy ! Component: 200 - total flux cleaned = 0.0214765 Jy ! Total flux subtracted in 200 components = 0.0214765 Jy ! Clean residual min=-0.010126 max=0.011869 Jy/beam ! Clean residual mean=-0.000035 rms=0.002872 Jy/beam ! Combined flux in latest and established models = 3.52039 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 190 components and 3.52039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.105510Jy sigma=0.000710 ! Fit after self-cal, rms=0.105416Jy sigma=0.000709 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Added new window around map position (2.6, 24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288033 Jy ! Component: 100 - total flux cleaned = -0.000530164 Jy ! Component: 150 - total flux cleaned = -0.00125275 Jy ! Component: 200 - total flux cleaned = -0.00126944 Jy ! Total flux subtracted in 200 components = -0.00126944 Jy ! Clean residual min=-0.007103 max=0.007527 Jy/beam ! Clean residual mean=-0.000022 rms=0.002239 Jy/beam ! Combined flux in latest and established models = 3.51912 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 235 components and 3.51912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104558Jy sigma=0.000701 ! Fit after self-cal, rms=0.104445Jy sigma=0.000700 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.7835 mas, bmaj=1.972 mas, bpa=-1.599 degrees ! Estimated noise=935.751 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7835 x 1.972 at -1.599 degrees (North through East) ! Clean map min=-0.0089751 max=2.478 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104445Jy sigma=0.000700 ! Fit after self-cal, rms=0.094599Jy sigma=0.000633 ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.7839 mas, bmaj=1.972 mas, bpa=-1.603 degrees ! Estimated noise=935.799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212856 Jy ! Component: 100 - total flux cleaned = 0.00166092 Jy ! Component: 150 - total flux cleaned = 0.00346927 Jy ! Component: 200 - total flux cleaned = 0.00457921 Jy ! Total flux subtracted in 200 components = 0.00457921 Jy ! Clean residual min=-0.008813 max=0.006458 Jy/beam ! Clean residual mean=-0.000009 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 3.5237 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 262 components and 3.5237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093701Jy sigma=0.000625 ! Fit after self-cal, rms=0.093680Jy sigma=0.000624 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000720143 Jy ! Component: 100 - total flux cleaned = 0.00189806 Jy ! Component: 150 - total flux cleaned = 0.00285356 Jy ! Component: 200 - total flux cleaned = 0.0033079 Jy ! Total flux subtracted in 200 components = 0.0033079 Jy ! Clean residual min=-0.008152 max=0.006145 Jy/beam ! Clean residual mean=-0.000010 rms=0.001370 Jy/beam ! Combined flux in latest and established models = 3.52701 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 269 components and 3.52701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093190Jy sigma=0.000620 ! Fit after self-cal, rms=0.093178Jy sigma=0.000620 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093178Jy sigma=0.000620 ! Fit after self-cal, rms=0.093166Jy sigma=0.000620 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.6375 mas, bmaj=1.755 mas, bpa=-4.186 degrees ! Estimated noise=1342.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.81798 Jy ! Component: 100 - total flux cleaned = 2.38831 Jy ! Component: 150 - total flux cleaned = 2.72447 Jy ! Component: 200 - total flux cleaned = 2.93108 Jy ! Total flux subtracted in 200 components = 2.93108 Jy ! Clean residual min=-0.037781 max=0.106319 Jy/beam ! Clean residual mean=0.000305 rms=0.010840 Jy/beam ! Combined flux in latest and established models = 2.93108 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 2.93108 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.7839 mas, bmaj=1.972 mas, bpa=-1.607 degrees ! Estimated noise=936.052 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.162848 Jy ! Component: 100 - total flux cleaned = 0.245033 Jy ! Component: 150 - total flux cleaned = 0.289943 Jy ! Component: 200 - total flux cleaned = 0.320519 Jy ! Total flux subtracted in 200 components = 0.320519 Jy ! Clean residual min=-0.020755 max=0.020855 Jy/beam ! Clean residual mean=0.000117 rms=0.004912 Jy/beam ! Combined flux in latest and established models = 3.25159 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 44 components and 3.25159 Jy ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=2.05 mas, bmaj=3.79 mas, bpa=3.616 degrees ! Estimated noise=1284.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429891 Jy ! Component: 100 - total flux cleaned = 0.0675867 Jy ! Component: 150 - total flux cleaned = 0.0857929 Jy ! Component: 200 - total flux cleaned = 0.103202 Jy ! Total flux subtracted in 200 components = 0.103202 Jy ! Clean residual min=-0.021483 max=0.015790 Jy/beam ! Clean residual mean=0.000127 rms=0.005709 Jy/beam ! Combined flux in latest and established models = 3.3548 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166251 Jy ! Component: 100 - total flux cleaned = 0.0298454 Jy ! Component: 150 - total flux cleaned = 0.0434216 Jy ! Component: 200 - total flux cleaned = 0.0549161 Jy ! Total flux subtracted in 200 components = 0.0549161 Jy ! Clean residual min=-0.014876 max=0.011991 Jy/beam ! Clean residual mean=0.000077 rms=0.003985 Jy/beam ! Combined flux in latest and established models = 3.40971 Jy ! Adding 137 model components to the UV plane model. ! The established model now contains 174 components and 3.40971 Jy ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! Estimated beam: bmin=0.7839 mas, bmaj=1.972 mas, bpa=-1.607 degrees ! Estimated noise=936.052 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00938721 Jy ! Component: 100 - total flux cleaned = 0.0187168 Jy ! Component: 150 - total flux cleaned = 0.0254494 Jy ! Component: 200 - total flux cleaned = 0.0301622 Jy ! Total flux subtracted in 200 components = 0.0301622 Jy ! Clean residual min=-0.012070 max=0.009371 Jy/beam ! Clean residual mean=0.000018 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 3.43988 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 196 components and 3.43988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101068Jy sigma=0.000686 ! Fit after self-cal, rms=0.100037Jy sigma=0.000677 wmodel J1733-1304_X_2017_02_19_pus_map.mod ! Writing 196 model components to file: J1733-1304_X_2017_02_19_pus_map.mod wobs J1733-1304_X_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J1733-1304_X_2017_02_19_pus_uvs.fits wwins J1733-1304_X_2017_02_19_pus_map.win ! wwins: Wrote 7 windows to J1733-1304_X_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00510405 Jy ! Component: 100 - total flux cleaned = -0.00718117 Jy ! Component: 150 - total flux cleaned = -0.00908643 Jy ! Component: 200 - total flux cleaned = -0.0102806 Jy ! Component: 250 - total flux cleaned = -0.0111386 Jy ! Component: 300 - total flux cleaned = -0.0114092 Jy ! Component: 350 - total flux cleaned = -0.011543 Jy ! Component: 400 - total flux cleaned = -0.011802 Jy ! Component: 450 - total flux cleaned = -0.0115549 Jy ! Component: 500 - total flux cleaned = -0.0116821 Jy ! Component: 550 - total flux cleaned = -0.0116829 Jy ! Component: 600 - total flux cleaned = -0.0115662 Jy ! Component: 650 - total flux cleaned = -0.0115639 Jy ! Component: 700 - total flux cleaned = -0.0111234 Jy ! Component: 750 - total flux cleaned = -0.0110165 Jy ! Component: 800 - total flux cleaned = -0.0108063 Jy ! Component: 850 - total flux cleaned = -0.0103919 Jy ! Component: 900 - total flux cleaned = -0.0100844 Jy ! Component: 950 - total flux cleaned = -0.00988269 Jy ! Component: 1000 - total flux cleaned = -0.00919442 Jy ! Component: 1050 - total flux cleaned = -0.0092927 Jy ! Component: 1100 - total flux cleaned = -0.00900639 Jy ! Component: 1150 - total flux cleaned = -0.00863437 Jy ! Component: 1200 - total flux cleaned = -0.00854441 Jy ! Component: 1250 - total flux cleaned = -0.00863369 Jy ! Component: 1300 - total flux cleaned = -0.00809742 Jy ! Component: 1350 - total flux cleaned = -0.00809787 Jy ! Component: 1400 - total flux cleaned = -0.00775058 Jy ! Component: 1450 - total flux cleaned = -0.00741033 Jy ! Component: 1500 - total flux cleaned = -0.00707546 Jy ! Component: 1550 - total flux cleaned = -0.0070768 Jy ! Component: 1600 - total flux cleaned = -0.00675061 Jy ! Component: 1650 - total flux cleaned = -0.00651039 Jy ! Component: 1700 - total flux cleaned = -0.00683167 Jy ! Component: 1750 - total flux cleaned = -0.00675358 Jy ! Component: 1800 - total flux cleaned = -0.00699008 Jy ! Component: 1850 - total flux cleaned = -0.00706784 Jy ! Component: 1900 - total flux cleaned = -0.00744706 Jy ! Component: 1950 - total flux cleaned = -0.00744816 Jy ! Component: 2000 - total flux cleaned = -0.00752208 Jy ! Total flux subtracted in 2048 components = -0.00766849 Jy ! Clean residual min=-0.003650 max=0.003649 Jy/beam ! Clean residual mean=0.000014 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 3.43221 Jy keep ! Adding 119 model components to the UV plane model. ! The established model now contains 302 components and 3.43221 Jy ![Exited script file: muppet] wmap "J1733-1304_X_2017_02_19_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7839 x 1.972 at -1.607 degrees (North through East) ! Clean map min=-0.0096287 max=2.4809 Jy/beam ! Writing clean map to FITS file: J1733-1304_X_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.48091 invert ! Inverting map ! Your choice of large map pixels excluded 0.067% of the data. ! The x-axis pixel size should ideally be below 0.1993 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00124114 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.150083 0.150083 0.300165 0.60033 1.20066 2.40132 4.80264 9.60528 19.2106 38.4211 76.8423 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.48 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7839 x 1.972 at -1.607 degrees (North through East) ! Clean map min=-0.0096287 max=2.4809 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1733-1304_X_2017_02_19_pus_uvs.log closed on Sat May 4 21:46:01 2019