! Started logfile: J1733-1304_S_2017_10_09_pus_uvs.log on Sun May 12 13:16:52 2019 obs J1733-1304_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1733-1304_S_2017_10_09_pus_uva.fits ! AN table 1: 10 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.652778 visibilities/baseline/integration-bin. ! Found source: J1733-1304 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1733-1304_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=3.482070Jy sigma=0.026691 ! Fit after self-cal, rms=3.477048Jy sigma=0.026648 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.568 mas, bmaj=15.24 mas, bpa=-17.8 degrees ! Estimated noise=4167.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.98879 Jy ! Component: 100 - total flux cleaned = 3.87172 Jy ! Total flux subtracted in 100 components = 3.87172 Jy ! Clean residual min=-0.308154 max=0.452935 Jy/beam ! Clean residual mean=0.000035 rms=0.108884 Jy/beam ! Combined flux in latest and established models = 3.87172 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 3.87172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.278093Jy sigma=0.009283 ! Fit after self-cal, rms=1.278019Jy sigma=0.009282 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.094 mas, bmaj=16.51 mas, bpa=-17.97 degrees ! Estimated noise=3544.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.694385 Jy ! Component: 100 - total flux cleaned = 1.12689 Jy ! Component: 150 - total flux cleaned = 1.42402 Jy ! Component: 200 - total flux cleaned = 1.6328 Jy ! Total flux subtracted in 200 components = 1.6328 Jy ! Clean residual min=-0.150060 max=0.244428 Jy/beam ! Clean residual mean=0.000378 rms=0.060585 Jy/beam ! Combined flux in latest and established models = 5.50452 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 86 components and 5.50452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.701698Jy sigma=0.004726 ! Fit after self-cal, rms=0.697661Jy sigma=0.004705 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.98 KP 1.06 ! LA 1.01 MK 1.01 NL 0.99 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.02 KP 1.03 ! LA 0.97 MK 1.02 NL 0.83 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.06 HN 1.01 KP 0.89 ! LA 0.78 MK 1.04 NL 1.16 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.697661Jy sigma=0.004705 ! Fit after self-cal, rms=0.383258Jy sigma=0.002912 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=16.78 mas, bpa=-18.07 degrees ! Estimated noise=3518.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.213354 Jy ! Component: 100 - total flux cleaned = 0.254956 Jy ! Component: 150 - total flux cleaned = 0.271529 Jy ! Component: 200 - total flux cleaned = 0.282541 Jy ! Total flux subtracted in 200 components = 0.282541 Jy ! Clean residual min=-0.055702 max=0.070127 Jy/beam ! Clean residual mean=-0.000064 rms=0.019121 Jy/beam ! Combined flux in latest and established models = 5.78706 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 130 components and 5.78706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233849Jy sigma=0.001699 ! Fit after self-cal, rms=0.222416Jy sigma=0.001615 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222416Jy sigma=0.001615 ! Fit after self-cal, rms=0.210478Jy sigma=0.001552 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=16.82 mas, bpa=-18.08 degrees ! Estimated noise=3489.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0623436 Jy ! Component: 100 - total flux cleaned = 0.0688082 Jy ! Component: 150 - total flux cleaned = 0.0689507 Jy ! Component: 200 - total flux cleaned = 0.0679321 Jy ! Total flux subtracted in 200 components = 0.0679321 Jy ! Clean residual min=-0.040466 max=0.034889 Jy/beam ! Clean residual mean=-0.000023 rms=0.010815 Jy/beam ! Combined flux in latest and established models = 5.85499 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 166 components and 5.85499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.186610Jy sigma=0.001353 ! Fit after self-cal, rms=0.185015Jy sigma=0.001340 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129111 Jy ! Component: 100 - total flux cleaned = 0.0170789 Jy ! Component: 150 - total flux cleaned = 0.0193685 Jy ! Component: 200 - total flux cleaned = 0.0208153 Jy ! Total flux subtracted in 200 components = 0.0208153 Jy ! Clean residual min=-0.035959 max=0.025578 Jy/beam ! Clean residual mean=-0.000022 rms=0.008998 Jy/beam ! Combined flux in latest and established models = 5.87581 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 194 components and 5.87581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177860Jy sigma=0.001287 ! Fit after self-cal, rms=0.177678Jy sigma=0.001285 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177678Jy sigma=0.001285 ! Fit after self-cal, rms=0.176287Jy sigma=0.001277 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=16.83 mas, bpa=-18.07 degrees ! Estimated noise=3487.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.016976 Jy ! Component: 100 - total flux cleaned = 0.0220922 Jy ! Component: 150 - total flux cleaned = 0.0238268 Jy ! Component: 200 - total flux cleaned = 0.0238136 Jy ! Total flux subtracted in 200 components = 0.0238136 Jy ! Clean residual min=-0.029166 max=0.022717 Jy/beam ! Clean residual mean=-0.000009 rms=0.007645 Jy/beam ! Combined flux in latest and established models = 5.89962 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 214 components and 5.89962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171832Jy sigma=0.001244 ! Fit after self-cal, rms=0.171773Jy sigma=0.001242 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00705517 Jy ! Component: 100 - total flux cleaned = 0.00756178 Jy ! Component: 150 - total flux cleaned = 0.00755986 Jy ! Component: 200 - total flux cleaned = 0.00710754 Jy ! Total flux subtracted in 200 components = 0.00710754 Jy ! Clean residual min=-0.025430 max=0.020589 Jy/beam ! Clean residual mean=-0.000008 rms=0.007001 Jy/beam ! Combined flux in latest and established models = 5.90673 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 227 components and 5.90673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169029Jy sigma=0.001223 ! Fit after self-cal, rms=0.169004Jy sigma=0.001223 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169004Jy sigma=0.001223 ! Fit after self-cal, rms=0.168728Jy sigma=0.001221 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.783 mas, bmaj=18.64 mas, bpa=-8.88 degrees ! Estimated noise=4301.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00636733 Jy ! Component: 100 - total flux cleaned = 0.0075538 Jy ! Component: 150 - total flux cleaned = 0.00864482 Jy ! Component: 200 - total flux cleaned = 0.0101697 Jy ! Total flux subtracted in 200 components = 0.0101697 Jy ! Clean residual min=-0.027726 max=0.023452 Jy/beam ! Clean residual mean=0.000001 rms=0.007883 Jy/beam ! Combined flux in latest and established models = 5.9169 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 253 components and 5.9169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166823Jy sigma=0.001208 ! Fit after self-cal, rms=0.166798Jy sigma=0.001208 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000999566 Jy ! Component: 100 - total flux cleaned = 0.00101407 Jy ! Component: 150 - total flux cleaned = 0.0014626 Jy ! Component: 200 - total flux cleaned = 0.00187978 Jy ! Total flux subtracted in 200 components = 0.00187978 Jy ! Clean residual min=-0.025000 max=0.021808 Jy/beam ! Clean residual mean=0.000001 rms=0.007207 Jy/beam ! Combined flux in latest and established models = 5.91878 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 264 components and 5.91878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165803Jy sigma=0.001203 ! Fit after self-cal, rms=0.165802Jy sigma=0.001203 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.108 mas, bmaj=16.84 mas, bpa=-18.07 degrees ! Estimated noise=3487.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.108 x 16.84 at -18.07 degrees (North through East) ! Clean map min=-0.077751 max=3.9536 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165802Jy sigma=0.001203 ! Fit after self-cal, rms=0.095750Jy sigma=0.000723 ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=16.8 mas, bpa=-18.05 degrees ! Estimated noise=3489.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000408707 Jy ! Component: 100 - total flux cleaned = -0.00121156 Jy ! Component: 150 - total flux cleaned = -0.00232754 Jy ! Component: 200 - total flux cleaned = -0.00300174 Jy ! Total flux subtracted in 200 components = -0.00300174 Jy ! Clean residual min=-0.021077 max=0.017808 Jy/beam ! Clean residual mean=-0.000000 rms=0.005169 Jy/beam ! Combined flux in latest and established models = 5.91578 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 287 components and 5.91577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092308Jy sigma=0.000699 ! Fit after self-cal, rms=0.092286Jy sigma=0.000699 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153286 Jy ! Component: 100 - total flux cleaned = 0.00094449 Jy ! Component: 150 - total flux cleaned = 0.000388884 Jy ! Component: 200 - total flux cleaned = -0.000134225 Jy ! Total flux subtracted in 200 components = -0.000134225 Jy ! Clean residual min=-0.019658 max=0.017239 Jy/beam ! Clean residual mean=0.000001 rms=0.004919 Jy/beam ! Combined flux in latest and established models = 5.91564 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 302 components and 5.91564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090537Jy sigma=0.000687 ! Fit after self-cal, rms=0.090522Jy sigma=0.000686 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090522Jy sigma=0.000686 ! Fit after self-cal, rms=0.090417Jy sigma=0.000685 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.569 mas, bmaj=15.38 mas, bpa=-17.94 degrees ! Estimated noise=4106.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.94651 Jy ! Component: 100 - total flux cleaned = 3.79187 Jy ! Component: 150 - total flux cleaned = 4.24913 Jy ! Component: 200 - total flux cleaned = 4.57772 Jy ! Total flux subtracted in 200 components = 4.57772 Jy ! Clean residual min=-0.162221 max=0.211552 Jy/beam ! Clean residual mean=-0.000037 rms=0.060031 Jy/beam ! Combined flux in latest and established models = 4.57772 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 4.57772 Jy ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=16.8 mas, bpa=-18.06 degrees ! Estimated noise=3490.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.354133 Jy ! Component: 100 - total flux cleaned = 0.599691 Jy ! Component: 150 - total flux cleaned = 0.776291 Jy ! Component: 200 - total flux cleaned = 0.905853 Jy ! Total flux subtracted in 200 components = 0.905853 Jy ! Clean residual min=-0.074450 max=0.094954 Jy/beam ! Clean residual mean=0.000161 rms=0.028625 Jy/beam ! Combined flux in latest and established models = 5.48357 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 137 components and 5.48357 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.786 mas, bmaj=18.64 mas, bpa=-8.855 degrees ! Estimated noise=4304.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.157289 Jy ! Component: 100 - total flux cleaned = 0.258221 Jy ! Component: 150 - total flux cleaned = 0.325715 Jy ! Component: 200 - total flux cleaned = 0.373395 Jy ! Total flux subtracted in 200 components = 0.373395 Jy ! Clean residual min=-0.052041 max=0.042594 Jy/beam ! Clean residual mean=-0.000036 rms=0.015270 Jy/beam ! Combined flux in latest and established models = 5.85697 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196434 Jy ! Component: 100 - total flux cleaned = 0.0361808 Jy ! Component: 150 - total flux cleaned = 0.0459777 Jy ! Component: 200 - total flux cleaned = 0.0527453 Jy ! Total flux subtracted in 200 components = 0.0527453 Jy ! Clean residual min=-0.034412 max=0.030750 Jy/beam ! Clean residual mean=-0.000048 rms=0.010308 Jy/beam ! Combined flux in latest and established models = 5.90971 Jy ! Adding 122 model components to the UV plane model. ! The established model now contains 252 components and 5.90972 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=16.8 mas, bpa=-18.06 degrees ! Estimated noise=3490.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00435053 Jy ! Component: 100 - total flux cleaned = -0.00111736 Jy ! Component: 150 - total flux cleaned = 0.00413264 Jy ! Component: 200 - total flux cleaned = 0.0102523 Jy ! Total flux subtracted in 200 components = 0.0102523 Jy ! Clean residual min=-0.036951 max=0.028986 Jy/beam ! Clean residual mean=-0.000021 rms=0.007714 Jy/beam ! Combined flux in latest and established models = 5.91997 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 272 components and 5.91997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106339Jy sigma=0.000816 ! Fit after self-cal, rms=0.105765Jy sigma=0.000811 wmodel J1733-1304_S_2017_10_09_pus_map.mod ! Writing 272 model components to file: J1733-1304_S_2017_10_09_pus_map.mod wobs J1733-1304_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1733-1304_S_2017_10_09_pus_uvs.fits wwins J1733-1304_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1733-1304_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0102618 Jy ! Component: 100 - total flux cleaned = -0.0158565 Jy ! Component: 150 - total flux cleaned = -0.0200221 Jy ! Component: 200 - total flux cleaned = -0.0230068 Jy ! Component: 250 - total flux cleaned = -0.0257293 Jy ! Component: 300 - total flux cleaned = -0.0279401 Jy ! Component: 350 - total flux cleaned = -0.0297203 Jy ! Component: 400 - total flux cleaned = -0.0316618 Jy ! Component: 450 - total flux cleaned = -0.0329697 Jy ! Component: 500 - total flux cleaned = -0.0354281 Jy ! Component: 550 - total flux cleaned = -0.037767 Jy ! Component: 600 - total flux cleaned = -0.0397709 Jy ! Component: 650 - total flux cleaned = -0.040838 Jy ! Component: 700 - total flux cleaned = -0.0422639 Jy ! Component: 750 - total flux cleaned = -0.0434252 Jy ! Component: 800 - total flux cleaned = -0.0447162 Jy ! Component: 850 - total flux cleaned = -0.0455935 Jy ! Component: 900 - total flux cleaned = -0.0466035 Jy ! Component: 950 - total flux cleaned = -0.0466073 Jy ! Component: 1000 - total flux cleaned = -0.0470702 Jy ! Component: 1050 - total flux cleaned = -0.0472177 Jy ! Component: 1100 - total flux cleaned = -0.0470766 Jy ! Component: 1150 - total flux cleaned = -0.047216 Jy ! Component: 1200 - total flux cleaned = -0.0470853 Jy ! Component: 1250 - total flux cleaned = -0.0469577 Jy ! Component: 1300 - total flux cleaned = -0.0468304 Jy ! Component: 1350 - total flux cleaned = -0.0468311 Jy ! Component: 1400 - total flux cleaned = -0.0468293 Jy ! Component: 1450 - total flux cleaned = -0.0470496 Jy ! Component: 1500 - total flux cleaned = -0.0470529 Jy ! Component: 1550 - total flux cleaned = -0.0474804 Jy ! Component: 1600 - total flux cleaned = -0.0477898 Jy ! Component: 1650 - total flux cleaned = -0.0481942 Jy ! Component: 1700 - total flux cleaned = -0.0483914 Jy ! Component: 1750 - total flux cleaned = -0.0483911 Jy ! Component: 1800 - total flux cleaned = -0.0482043 Jy ! Component: 1850 - total flux cleaned = -0.0481113 Jy ! Component: 1900 - total flux cleaned = -0.0481116 Jy ! Component: 1950 - total flux cleaned = -0.0482001 Jy ! Component: 2000 - total flux cleaned = -0.048287 Jy ! Component: 2050 - total flux cleaned = -0.0482014 Jy ! Component: 2100 - total flux cleaned = -0.0481167 Jy ! Component: 2150 - total flux cleaned = -0.0480336 Jy ! Component: 2200 - total flux cleaned = -0.0478696 Jy ! Component: 2250 - total flux cleaned = -0.0477874 Jy ! Component: 2300 - total flux cleaned = -0.0475484 Jy ! Component: 2350 - total flux cleaned = -0.0475491 Jy ! Component: 2400 - total flux cleaned = -0.0474711 Jy ! Component: 2450 - total flux cleaned = -0.047317 Jy ! Component: 2500 - total flux cleaned = -0.0471648 Jy ! Component: 2550 - total flux cleaned = -0.0469388 Jy ! Component: 2600 - total flux cleaned = -0.0468648 Jy ! Component: 2650 - total flux cleaned = -0.0470133 Jy ! Component: 2700 - total flux cleaned = -0.0470874 Jy ! Component: 2750 - total flux cleaned = -0.0470874 Jy ! Component: 2800 - total flux cleaned = -0.0472338 Jy ! Component: 2850 - total flux cleaned = -0.047234 Jy ! Component: 2900 - total flux cleaned = -0.0471614 Jy ! Component: 2950 - total flux cleaned = -0.0472341 Jy ! Component: 3000 - total flux cleaned = -0.0474507 Jy ! Component: 3050 - total flux cleaned = -0.0474511 Jy ! Component: 3100 - total flux cleaned = -0.0475234 Jy ! Component: 3150 - total flux cleaned = -0.0475963 Jy ! Component: 3200 - total flux cleaned = -0.0477409 Jy ! Component: 3250 - total flux cleaned = -0.0478857 Jy ! Component: 3300 - total flux cleaned = -0.0480317 Jy ! Component: 3350 - total flux cleaned = -0.0481778 Jy ! Component: 3400 - total flux cleaned = -0.0482509 Jy ! Component: 3450 - total flux cleaned = -0.0483981 Jy ! Component: 3500 - total flux cleaned = -0.0486939 Jy ! Component: 3550 - total flux cleaned = -0.0488422 Jy ! Component: 3600 - total flux cleaned = -0.0491405 Jy ! Component: 3650 - total flux cleaned = -0.0493662 Jy ! Component: 3700 - total flux cleaned = -0.0495929 Jy ! Component: 3750 - total flux cleaned = -0.0498208 Jy ! Component: 3800 - total flux cleaned = -0.0502035 Jy ! Component: 3850 - total flux cleaned = -0.050512 Jy ! Component: 3900 - total flux cleaned = -0.0508227 Jy ! Component: 3950 - total flux cleaned = -0.0510573 Jy ! Component: 4000 - total flux cleaned = -0.0513733 Jy ! Component: 4050 - total flux cleaned = -0.051533 Jy ! Total flux subtracted in 4096 components = -0.0517733 Jy ! Clean residual min=-0.005041 max=0.004675 Jy/beam ! Clean residual mean=0.000057 rms=0.001289 Jy/beam ! Combined flux in latest and established models = 5.8682 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 521 components and 5.8682 Jy ![Exited script file: muppet] wmap "J1733-1304_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.109 x 16.8 at -18.06 degrees (North through East) ! Clean map min=-0.028371 max=4.0268 Jy/beam ! Writing clean map to FITS file: J1733-1304_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.02679 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00120111 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.089484 0.089484 0.178968 0.357936 0.715872 1.43174 2.86349 5.72697 11.4539 22.9079 45.8158 91.6316 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(1000*peak_flux)/1000 ! peak= 4.026 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.109 x 16.8 at -18.06 degrees (North through East) ! Clean map min=-0.028371 max=4.0268 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1733-1304_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:16:56 2019