! Started logfile: J1733-1304_S_2017_06_10_pus_uvs.log on Mon May 6 14:59:13 2019 obs J1733-1304_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1733-1304_S_2017_06_10_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.859722 visibilities/baseline/integration-bin. ! Found source: J1733-1304 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 2476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1733-1304_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=2.331544Jy sigma=0.020113 ! Fit after self-cal, rms=2.289579Jy sigma=0.019753 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.528 mas, bmaj=7.414 mas, bpa=-1.398 degrees ! Estimated noise=2605.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.09206 Jy ! Component: 100 - total flux cleaned = 2.73349 Jy ! Total flux subtracted in 100 components = 2.73349 Jy ! Clean residual min=-0.181205 max=0.296580 Jy/beam ! Clean residual mean=0.000365 rms=0.053922 Jy/beam ! Combined flux in latest and established models = 2.73349 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 2.73349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.056452Jy sigma=0.009010 ! Fit after self-cal, rms=1.056438Jy sigma=0.009009 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.118 mas, bmaj=8.27 mas, bpa=-0.3445 degrees ! Estimated noise=2071.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.543705 Jy ! Component: 100 - total flux cleaned = 0.809993 Jy ! Component: 150 - total flux cleaned = 0.955028 Jy ! Component: 200 - total flux cleaned = 1.03664 Jy ! Total flux subtracted in 200 components = 1.03664 Jy ! Clean residual min=-0.192805 max=0.240495 Jy/beam ! Clean residual mean=0.000506 rms=0.057062 Jy/beam ! Combined flux in latest and established models = 3.77013 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 57 components and 3.77013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.778501Jy sigma=0.006347 ! Fit after self-cal, rms=0.776518Jy sigma=0.006333 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.06 HN 1.36 KP 0.97 ! LA 0.91 MK 1.02 NL 0.91 OV 0.98 ! PT 0.91 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.34 KP 0.93 ! LA 0.87 MK 1.01 NL 1.07 OV 1.05 ! PT 0.89 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.14 HN 1.41 KP 0.93 ! LA 0.89 MK 1.01 NL 1.00 OV 0.95 ! PT 0.88 SC 1.02 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 1.53 KP 1.00* ! LA 1.00* MK 0.94 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.776518Jy sigma=0.006333 ! Fit after self-cal, rms=0.712370Jy sigma=0.004865 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=8.285 mas, bpa=0.3114 degrees ! Estimated noise=2082.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.21937 Jy ! Component: 100 - total flux cleaned = 0.341486 Jy ! Component: 150 - total flux cleaned = 0.422513 Jy ! Component: 200 - total flux cleaned = 0.4574 Jy ! Total flux subtracted in 200 components = 0.4574 Jy ! Clean residual min=-0.128279 max=0.124484 Jy/beam ! Clean residual mean=-0.000372 rms=0.030406 Jy/beam ! Combined flux in latest and established models = 4.22753 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 90 components and 4.22753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.642560Jy sigma=0.004023 ! Fit after self-cal, rms=0.632649Jy sigma=0.003935 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.632649Jy sigma=0.003935 ! Fit after self-cal, rms=0.622070Jy sigma=0.003861 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=8.273 mas, bpa=0.4144 degrees ! Estimated noise=2068.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0857711 Jy ! Component: 100 - total flux cleaned = 0.107189 Jy ! Component: 150 - total flux cleaned = 0.116471 Jy ! Component: 200 - total flux cleaned = 0.118101 Jy ! Total flux subtracted in 200 components = 0.118101 Jy ! Clean residual min=-0.115478 max=0.108959 Jy/beam ! Clean residual mean=-0.000284 rms=0.027410 Jy/beam ! Combined flux in latest and established models = 4.34563 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 111 components and 4.34563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.604329Jy sigma=0.003687 ! Fit after self-cal, rms=0.600938Jy sigma=0.003657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313515 Jy ! Component: 100 - total flux cleaned = 0.0391404 Jy ! Component: 150 - total flux cleaned = 0.0378928 Jy ! Component: 200 - total flux cleaned = 0.0379436 Jy ! Total flux subtracted in 200 components = 0.0379436 Jy ! Clean residual min=-0.116591 max=0.103738 Jy/beam ! Clean residual mean=-0.000301 rms=0.026745 Jy/beam ! Combined flux in latest and established models = 4.38357 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 124 components and 4.38357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.592395Jy sigma=0.003599 ! Fit after self-cal, rms=0.591111Jy sigma=0.003589 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.591111Jy sigma=0.003589 ! Fit after self-cal, rms=0.221621Jy sigma=0.001682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=8.287 mas, bpa=0.1804 degrees ! Estimated noise=2071.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0297472 Jy ! Component: 100 - total flux cleaned = 0.0331095 Jy ! Component: 150 - total flux cleaned = 0.0356799 Jy ! Component: 200 - total flux cleaned = 0.037747 Jy ! Total flux subtracted in 200 components = 0.037747 Jy ! Clean residual min=-0.035554 max=0.038745 Jy/beam ! Clean residual mean=-0.000089 rms=0.010052 Jy/beam ! Combined flux in latest and established models = 4.42132 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 147 components and 4.42132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197805Jy sigma=0.001438 ! Fit after self-cal, rms=0.194811Jy sigma=0.001413 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00691825 Jy ! Component: 100 - total flux cleaned = 0.00334197 Jy ! Component: 150 - total flux cleaned = -0.000459275 Jy ! Component: 200 - total flux cleaned = -0.00381396 Jy ! Total flux subtracted in 200 components = -0.00381396 Jy ! Clean residual min=-0.033142 max=0.034426 Jy/beam ! Clean residual mean=-0.000089 rms=0.009092 Jy/beam ! Combined flux in latest and established models = 4.41751 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 166 components and 4.41751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188158Jy sigma=0.001344 ! Fit after self-cal, rms=0.187135Jy sigma=0.001337 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187135Jy sigma=0.001337 ! Fit after self-cal, rms=0.179235Jy sigma=0.001289 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.213 mas, bmaj=17.38 mas, bpa=5.512 degrees ! Estimated noise=2551.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175174 Jy ! Component: 100 - total flux cleaned = 0.0205547 Jy ! Component: 150 - total flux cleaned = 0.0163805 Jy ! Component: 200 - total flux cleaned = 0.0128925 Jy ! Total flux subtracted in 200 components = 0.0128925 Jy ! Clean residual min=-0.027294 max=0.035263 Jy/beam ! Clean residual mean=-0.000076 rms=0.009178 Jy/beam ! Combined flux in latest and established models = 4.4304 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 182 components and 4.4304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175087Jy sigma=0.001226 ! Fit after self-cal, rms=0.173095Jy sigma=0.001210 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163319 Jy ! Component: 100 - total flux cleaned = -0.000880065 Jy ! Component: 150 - total flux cleaned = -0.00327515 Jy ! Component: 200 - total flux cleaned = -0.0037012 Jy ! Total flux subtracted in 200 components = -0.0037012 Jy ! Clean residual min=-0.026732 max=0.033108 Jy/beam ! Clean residual mean=-0.000072 rms=0.008440 Jy/beam ! Combined flux in latest and established models = 4.4267 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 189 components and 4.4267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171298Jy sigma=0.001187 ! Fit after self-cal, rms=0.170490Jy sigma=0.001180 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=8.288 mas, bpa=0.1131 degrees ! Estimated noise=2067.89 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.171 x 8.288 at 0.1131 degrees (North through East) ! Clean map min=-0.02685 max=2.8313 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170490Jy sigma=0.001180 ! Fit after self-cal, rms=0.159390Jy sigma=0.001096 ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=8.309 mas, bpa=-0.02966 degrees ! Estimated noise=2070.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104144 Jy ! Component: 100 - total flux cleaned = 0.011805 Jy ! Component: 150 - total flux cleaned = 0.0118122 Jy ! Component: 200 - total flux cleaned = 0.0101214 Jy ! Total flux subtracted in 200 components = 0.0101214 Jy ! Clean residual min=-0.023573 max=0.038491 Jy/beam ! Clean residual mean=-0.000016 rms=0.006438 Jy/beam ! Combined flux in latest and established models = 4.43682 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 208 components and 4.43682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153820Jy sigma=0.001047 ! Fit after self-cal, rms=0.153256Jy sigma=0.001044 ! Inverting map ! Added new window around map position (-7, 30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201353 Jy ! Component: 100 - total flux cleaned = 0.0217786 Jy ! Component: 150 - total flux cleaned = 0.0224581 Jy ! Component: 200 - total flux cleaned = 0.0224487 Jy ! Total flux subtracted in 200 components = 0.0224487 Jy ! Clean residual min=-0.025319 max=0.022269 Jy/beam ! Clean residual mean=-0.000039 rms=0.005337 Jy/beam ! Combined flux in latest and established models = 4.45927 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 239 components and 4.45927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142416Jy sigma=0.000941 ! Fit after self-cal, rms=0.142144Jy sigma=0.000939 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142144Jy sigma=0.000939 ! Fit after self-cal, rms=0.139270Jy sigma=0.000924 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.554 mas, bmaj=7.426 mas, bpa=-1.262 degrees ! Estimated noise=2684.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.14094 Jy ! Component: 100 - total flux cleaned = 2.77999 Jy ! Component: 150 - total flux cleaned = 3.11881 Jy ! Component: 200 - total flux cleaned = 3.34765 Jy ! Total flux subtracted in 200 components = 3.34765 Jy ! Clean residual min=-0.061882 max=0.141360 Jy/beam ! Clean residual mean=0.000334 rms=0.022863 Jy/beam ! Combined flux in latest and established models = 3.34765 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 3.34765 Jy ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=8.298 mas, bpa=-0.06939 degrees ! Estimated noise=2066.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.301756 Jy ! Component: 100 - total flux cleaned = 0.495649 Jy ! Component: 150 - total flux cleaned = 0.634635 Jy ! Component: 200 - total flux cleaned = 0.737961 Jy ! Total flux subtracted in 200 components = 0.737961 Jy ! Clean residual min=-0.036356 max=0.059560 Jy/beam ! Clean residual mean=0.000257 rms=0.014906 Jy/beam ! Combined flux in latest and established models = 4.08561 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 136 components and 4.08562 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.193 mas, bmaj=17.36 mas, bpa=5.414 degrees ! Estimated noise=2553.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12841 Jy ! Component: 100 - total flux cleaned = 0.209259 Jy ! Component: 150 - total flux cleaned = 0.264001 Jy ! Component: 200 - total flux cleaned = 0.302231 Jy ! Total flux subtracted in 200 components = 0.302231 Jy ! Clean residual min=-0.019310 max=0.026146 Jy/beam ! Clean residual mean=0.000081 rms=0.007126 Jy/beam ! Combined flux in latest and established models = 4.38785 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271477 Jy ! Component: 100 - total flux cleaned = 0.0466994 Jy ! Component: 150 - total flux cleaned = 0.0610617 Jy ! Component: 200 - total flux cleaned = 0.0718467 Jy ! Total flux subtracted in 200 components = 0.0718467 Jy ! Clean residual min=-0.015604 max=0.017919 Jy/beam ! Clean residual mean=-0.000023 rms=0.004365 Jy/beam ! Combined flux in latest and established models = 4.45969 Jy ! Adding 119 model components to the UV plane model. ! The established model now contains 249 components and 4.4597 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=8.298 mas, bpa=-0.06939 degrees ! Estimated noise=2066.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00191435 Jy ! Component: 100 - total flux cleaned = 0.00393525 Jy ! Component: 150 - total flux cleaned = 0.00821232 Jy ! Component: 200 - total flux cleaned = 0.0118875 Jy ! Total flux subtracted in 200 components = 0.0118875 Jy ! Clean residual min=-0.014714 max=0.027187 Jy/beam ! Clean residual mean=-0.000020 rms=0.004233 Jy/beam ! Combined flux in latest and established models = 4.47158 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 269 components and 4.47158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125723Jy sigma=0.000851 ! Fit after self-cal, rms=0.122273Jy sigma=0.000808 wmodel J1733-1304_S_2017_06_10_pus_map.mod ! Writing 269 model components to file: J1733-1304_S_2017_06_10_pus_map.mod wobs J1733-1304_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1733-1304_S_2017_06_10_pus_uvs.fits wwins J1733-1304_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1733-1304_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00824779 Jy ! Component: 100 - total flux cleaned = 0.0110315 Jy ! Component: 150 - total flux cleaned = 0.0146165 Jy ! Component: 200 - total flux cleaned = 0.0168021 Jy ! Component: 250 - total flux cleaned = 0.0195821 Jy ! Component: 300 - total flux cleaned = 0.0220225 Jy ! Component: 350 - total flux cleaned = 0.0237324 Jy ! Component: 400 - total flux cleaned = 0.0249756 Jy ! Component: 450 - total flux cleaned = 0.0267737 Jy ! Component: 500 - total flux cleaned = 0.0275443 Jy ! Component: 550 - total flux cleaned = 0.0282975 Jy ! Component: 600 - total flux cleaned = 0.0292141 Jy ! Component: 650 - total flux cleaned = 0.0297492 Jy ! Component: 700 - total flux cleaned = 0.0302706 Jy ! Component: 750 - total flux cleaned = 0.0309467 Jy ! Component: 800 - total flux cleaned = 0.0312753 Jy ! Component: 850 - total flux cleaned = 0.031277 Jy ! Component: 900 - total flux cleaned = 0.0315892 Jy ! Component: 950 - total flux cleaned = 0.0317407 Jy ! Component: 1000 - total flux cleaned = 0.032043 Jy ! Component: 1050 - total flux cleaned = 0.0323387 Jy ! Component: 1100 - total flux cleaned = 0.0329138 Jy ! Component: 1150 - total flux cleaned = 0.0337584 Jy ! Component: 1200 - total flux cleaned = 0.0343098 Jy ! Component: 1250 - total flux cleaned = 0.0353904 Jy ! Component: 1300 - total flux cleaned = 0.0357876 Jy ! Component: 1350 - total flux cleaned = 0.0365697 Jy ! Component: 1400 - total flux cleaned = 0.0369554 Jy ! Component: 1450 - total flux cleaned = 0.0377108 Jy ! Component: 1500 - total flux cleaned = 0.0378348 Jy ! Component: 1550 - total flux cleaned = 0.0383233 Jy ! Component: 1600 - total flux cleaned = 0.038802 Jy ! Component: 1650 - total flux cleaned = 0.0391543 Jy ! Component: 1700 - total flux cleaned = 0.0391531 Jy ! Component: 1750 - total flux cleaned = 0.0396121 Jy ! Component: 1800 - total flux cleaned = 0.0394999 Jy ! Component: 1850 - total flux cleaned = 0.0396134 Jy ! Component: 1900 - total flux cleaned = 0.039944 Jy ! Component: 1950 - total flux cleaned = 0.0405923 Jy ! Component: 2000 - total flux cleaned = 0.0408029 Jy ! Component: 2050 - total flux cleaned = 0.0406972 Jy ! Component: 2100 - total flux cleaned = 0.0411139 Jy ! Component: 2150 - total flux cleaned = 0.0416273 Jy ! Component: 2200 - total flux cleaned = 0.0417281 Jy ! Component: 2250 - total flux cleaned = 0.0423262 Jy ! Component: 2300 - total flux cleaned = 0.0424254 Jy ! Component: 2350 - total flux cleaned = 0.0426193 Jy ! Component: 2400 - total flux cleaned = 0.0427159 Jy ! Component: 2450 - total flux cleaned = 0.0430006 Jy ! Component: 2500 - total flux cleaned = 0.043185 Jy ! Component: 2550 - total flux cleaned = 0.04337 Jy ! Component: 2600 - total flux cleaned = 0.0434599 Jy ! Component: 2650 - total flux cleaned = 0.0437303 Jy ! Component: 2700 - total flux cleaned = 0.0437306 Jy ! Component: 2750 - total flux cleaned = 0.0438186 Jy ! Component: 2800 - total flux cleaned = 0.0439919 Jy ! Component: 2850 - total flux cleaned = 0.0438212 Jy ! Component: 2900 - total flux cleaned = 0.0439913 Jy ! Component: 2950 - total flux cleaned = 0.0439064 Jy ! Component: 3000 - total flux cleaned = 0.0438234 Jy ! Component: 3050 - total flux cleaned = 0.0439054 Jy ! Component: 3100 - total flux cleaned = 0.0438245 Jy ! Component: 3150 - total flux cleaned = 0.0435841 Jy ! Component: 3200 - total flux cleaned = 0.0439022 Jy ! Component: 3250 - total flux cleaned = 0.0439028 Jy ! Component: 3300 - total flux cleaned = 0.0441359 Jy ! Component: 3350 - total flux cleaned = 0.0438276 Jy ! Component: 3400 - total flux cleaned = 0.043979 Jy ! Component: 3450 - total flux cleaned = 0.0436013 Jy ! Component: 3500 - total flux cleaned = 0.0436767 Jy ! Component: 3550 - total flux cleaned = 0.0437508 Jy ! Component: 3600 - total flux cleaned = 0.0437511 Jy ! Component: 3650 - total flux cleaned = 0.0436071 Jy ! Component: 3700 - total flux cleaned = 0.0438222 Jy ! Component: 3750 - total flux cleaned = 0.04368 Jy ! Component: 3800 - total flux cleaned = 0.0437506 Jy ! Component: 3850 - total flux cleaned = 0.0436808 Jy ! Component: 3900 - total flux cleaned = 0.0436121 Jy ! Component: 3950 - total flux cleaned = 0.0436799 Jy ! Component: 4000 - total flux cleaned = 0.0435435 Jy ! Component: 4050 - total flux cleaned = 0.0434088 Jy ! Total flux subtracted in 4096 components = 0.043476 Jy ! Clean residual min=-0.003956 max=0.004151 Jy/beam ! Clean residual mean=-0.000014 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 4.51506 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 556 components and 4.51506 Jy ![Exited script file: muppet] wmap "J1733-1304_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 8.298 at -0.06939 degrees (North through East) ! Clean map min=-0.0082853 max=2.8814 Jy/beam ! Writing clean map to FITS file: J1733-1304_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.88137 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00121551 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.126556 0.126556 0.253111 0.506222 1.01244 2.02489 4.04978 8.09956 16.1991 32.3982 64.7965 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.881 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 8.298 at -0.06939 degrees (North through East) ! Clean map min=-0.0082853 max=2.8814 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1733-1304_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:59:18 2019