! Started logfile: J1733-1304_S_2017_01_21_pus_uvs.log on Sun May 5 15:59:43 2019 obs J1733-1304_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1733-1304_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.666667 visibilities/baseline/integration-bin. ! Found source: J1733-1304 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 768 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1733-1304_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.349479Jy sigma=0.009211 ! Fit after self-cal, rms=1.344939Jy sigma=0.009181 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.301 mas, bmaj=6.45 mas, bpa=-2.466 degrees ! Estimated noise=5135.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.64662 Jy ! Component: 100 - total flux cleaned = 2.12694 Jy ! Total flux subtracted in 100 components = 2.12694 Jy ! Clean residual min=-0.216352 max=0.334667 Jy/beam ! Clean residual mean=-0.000886 rms=0.072665 Jy/beam ! Combined flux in latest and established models = 2.12694 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.12694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.687100Jy sigma=0.004349 ! Fit after self-cal, rms=0.687215Jy sigma=0.004348 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=6.706 mas, bpa=-0.9952 degrees ! Estimated noise=4545.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.276009 Jy ! Component: 100 - total flux cleaned = 0.420499 Jy ! Component: 150 - total flux cleaned = 0.503595 Jy ! Component: 200 - total flux cleaned = 0.553255 Jy ! Total flux subtracted in 200 components = 0.553255 Jy ! Clean residual min=-0.180125 max=0.284331 Jy/beam ! Clean residual mean=-0.001405 rms=0.070291 Jy/beam ! Combined flux in latest and established models = 2.68019 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 35 components and 2.68019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.640934Jy sigma=0.003314 ! Fit after self-cal, rms=0.640862Jy sigma=0.003312 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.94 LA 0.95 ! MK 1.00 NL 0.94 OV 1.84 PT 0.90 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.96 LA 0.90 ! MK 0.98 NL 0.96 OV 1.85 PT 0.87 ! SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.93 LA 0.91 ! MK 1.00 NL 0.95 OV 1.61 PT 0.87 ! SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.06 LA 0.87 ! MK 0.93 NL 1.00* OV 1.82 PT 0.86 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.640862Jy sigma=0.003312 ! Fit after self-cal, rms=0.318300Jy sigma=0.001903 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.598 mas, bmaj=6.731 mas, bpa=-1.73 degrees ! Estimated noise=4517.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1, 21.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.17851 Jy ! Component: 100 - total flux cleaned = 0.256955 Jy ! Component: 150 - total flux cleaned = 0.305507 Jy ! Component: 200 - total flux cleaned = 0.338561 Jy ! Total flux subtracted in 200 components = 0.338561 Jy ! Clean residual min=-0.046254 max=0.041384 Jy/beam ! Clean residual mean=-0.000122 rms=0.012278 Jy/beam ! Combined flux in latest and established models = 3.01875 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 70 components and 3.01875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221691Jy sigma=0.000985 ! Fit after self-cal, rms=0.218554Jy sigma=0.000966 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218554Jy sigma=0.000966 ! Fit after self-cal, rms=0.210645Jy sigma=0.000888 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.599 mas, bmaj=6.733 mas, bpa=-1.83 degrees ! Estimated noise=4475.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357144 Jy ! Component: 100 - total flux cleaned = 0.0516441 Jy ! Component: 150 - total flux cleaned = 0.0612644 Jy ! Component: 200 - total flux cleaned = 0.0661263 Jy ! Total flux subtracted in 200 components = 0.0661263 Jy ! Clean residual min=-0.031643 max=0.030699 Jy/beam ! Clean residual mean=-0.000044 rms=0.008052 Jy/beam ! Combined flux in latest and established models = 3.08488 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 3.08488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204520Jy sigma=0.000803 ! Fit after self-cal, rms=0.203211Jy sigma=0.000799 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103005 Jy ! Component: 100 - total flux cleaned = 0.014041 Jy ! Component: 150 - total flux cleaned = 0.0173409 Jy ! Component: 200 - total flux cleaned = 0.020585 Jy ! Total flux subtracted in 200 components = 0.020585 Jy ! Clean residual min=-0.030214 max=0.026011 Jy/beam ! Clean residual mean=-0.000029 rms=0.007443 Jy/beam ! Combined flux in latest and established models = 3.10546 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 105 components and 3.10547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201310Jy sigma=0.000784 ! Fit after self-cal, rms=0.200897Jy sigma=0.000783 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200897Jy sigma=0.000783 ! Fit after self-cal, rms=0.198980Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=6.736 mas, bpa=-1.914 degrees ! Estimated noise=4466.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138166 Jy ! Component: 100 - total flux cleaned = 0.0180547 Jy ! Component: 150 - total flux cleaned = 0.0198311 Jy ! Component: 200 - total flux cleaned = 0.0207884 Jy ! Total flux subtracted in 200 components = 0.0207884 Jy ! Clean residual min=-0.025190 max=0.022845 Jy/beam ! Clean residual mean=-0.000018 rms=0.006449 Jy/beam ! Combined flux in latest and established models = 3.12625 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 121 components and 3.12625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196742Jy sigma=0.000752 ! Fit after self-cal, rms=0.196280Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00496807 Jy ! Component: 100 - total flux cleaned = 0.0061889 Jy ! Component: 150 - total flux cleaned = 0.00732208 Jy ! Component: 200 - total flux cleaned = 0.00785212 Jy ! Total flux subtracted in 200 components = 0.00785212 Jy ! Clean residual min=-0.024946 max=0.021704 Jy/beam ! Clean residual mean=-0.000010 rms=0.006231 Jy/beam ! Combined flux in latest and established models = 3.13411 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 3.13411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194925Jy sigma=0.000744 ! Fit after self-cal, rms=0.194725Jy sigma=0.000743 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194725Jy sigma=0.000743 ! Fit after self-cal, rms=0.194063Jy sigma=0.000739 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.527 mas, bmaj=14.14 mas, bpa=7.629 degrees ! Estimated noise=6473.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149336 Jy ! Component: 100 - total flux cleaned = 0.00229848 Jy ! Component: 150 - total flux cleaned = 0.00284799 Jy ! Component: 200 - total flux cleaned = 0.00333189 Jy ! Total flux subtracted in 200 components = 0.00333189 Jy ! Clean residual min=-0.027617 max=0.030248 Jy/beam ! Clean residual mean=-0.000015 rms=0.007937 Jy/beam ! Combined flux in latest and established models = 3.13744 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 142 components and 3.13744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193741Jy sigma=0.000739 ! Fit after self-cal, rms=0.193153Jy sigma=0.000735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178972 Jy ! Component: 100 - total flux cleaned = 0.00237688 Jy ! Component: 150 - total flux cleaned = 0.00287681 Jy ! Component: 200 - total flux cleaned = 0.0033019 Jy ! Total flux subtracted in 200 components = 0.0033019 Jy ! Clean residual min=-0.025296 max=0.028837 Jy/beam ! Clean residual mean=0.000005 rms=0.007435 Jy/beam ! Combined flux in latest and established models = 3.14074 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 160 components and 3.14074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193042Jy sigma=0.000738 ! Fit after self-cal, rms=0.192836Jy sigma=0.000736 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=6.737 mas, bpa=-1.948 degrees ! Estimated noise=4465.39 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.601 x 6.737 at -1.948 degrees (North through East) ! Clean map min=-0.022769 max=2.148 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192836Jy sigma=0.000736 ! Fit after self-cal, rms=0.185525Jy sigma=0.000679 ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=6.744 mas, bpa=-2.048 degrees ! Estimated noise=4468.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00286429 Jy ! Component: 100 - total flux cleaned = 0.00441286 Jy ! Component: 150 - total flux cleaned = 0.00554899 Jy ! Component: 200 - total flux cleaned = 0.00661177 Jy ! Total flux subtracted in 200 components = 0.00661177 Jy ! Clean residual min=-0.020347 max=0.020821 Jy/beam ! Clean residual mean=-0.000001 rms=0.005324 Jy/beam ! Combined flux in latest and established models = 3.14735 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 171 components and 3.14735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184143Jy sigma=0.000671 ! Fit after self-cal, rms=0.184074Jy sigma=0.000671 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168509 Jy ! Component: 100 - total flux cleaned = 0.00267988 Jy ! Component: 150 - total flux cleaned = 0.00362264 Jy ! Component: 200 - total flux cleaned = 0.00429307 Jy ! Total flux subtracted in 200 components = 0.00429307 Jy ! Clean residual min=-0.020099 max=0.020558 Jy/beam ! Clean residual mean=0.000002 rms=0.005200 Jy/beam ! Combined flux in latest and established models = 3.15164 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 176 components and 3.15164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183107Jy sigma=0.000666 ! Fit after self-cal, rms=0.183084Jy sigma=0.000666 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183084Jy sigma=0.000666 ! Fit after self-cal, rms=0.182873Jy sigma=0.000665 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.298 mas, bmaj=6.506 mas, bpa=-3.581 degrees ! Estimated noise=5097.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.63216 Jy ! Component: 100 - total flux cleaned = 2.12016 Jy ! Component: 150 - total flux cleaned = 2.35414 Jy ! Component: 200 - total flux cleaned = 2.51438 Jy ! Total flux subtracted in 200 components = 2.51438 Jy ! Clean residual min=-0.084488 max=0.106948 Jy/beam ! Clean residual mean=-0.000119 rms=0.030781 Jy/beam ! Combined flux in latest and established models = 2.51438 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 2.51438 Jy ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=6.745 mas, bpa=-2.071 degrees ! Estimated noise=4469.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.141488 Jy ! Component: 100 - total flux cleaned = 0.245997 Jy ! Component: 150 - total flux cleaned = 0.325977 Jy ! Component: 200 - total flux cleaned = 0.388274 Jy ! Total flux subtracted in 200 components = 0.388274 Jy ! Clean residual min=-0.044721 max=0.044809 Jy/beam ! Clean residual mean=-0.000023 rms=0.016353 Jy/beam ! Combined flux in latest and established models = 2.90265 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 62 components and 2.90265 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.531 mas, bmaj=14.15 mas, bpa=7.574 degrees ! Estimated noise=6466.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100009 Jy ! Component: 100 - total flux cleaned = 0.158304 Jy ! Component: 150 - total flux cleaned = 0.194945 Jy ! Component: 200 - total flux cleaned = 0.218155 Jy ! Total flux subtracted in 200 components = 0.218155 Jy ! Clean residual min=-0.026776 max=0.032878 Jy/beam ! Clean residual mean=0.000022 rms=0.009678 Jy/beam ! Combined flux in latest and established models = 3.12081 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147355 Jy ! Component: 100 - total flux cleaned = 0.024102 Jy ! Component: 150 - total flux cleaned = 0.0288664 Jy ! Component: 200 - total flux cleaned = 0.0298393 Jy ! Total flux subtracted in 200 components = 0.0298393 Jy ! Clean residual min=-0.022126 max=0.027192 Jy/beam ! Clean residual mean=0.000032 rms=0.007204 Jy/beam ! Combined flux in latest and established models = 3.15065 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 113 components and 3.15065 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.603 mas, bmaj=6.745 mas, bpa=-2.071 degrees ! Estimated noise=4469.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00616871 Jy ! Component: 100 - total flux cleaned = 0.00616507 Jy ! Component: 150 - total flux cleaned = 0.00617605 Jy ! Component: 200 - total flux cleaned = 0.00689927 Jy ! Total flux subtracted in 200 components = 0.00689927 Jy ! Clean residual min=-0.023730 max=0.021852 Jy/beam ! Clean residual mean=0.000019 rms=0.005291 Jy/beam ! Combined flux in latest and established models = 3.15754 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 3.15755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179337Jy sigma=0.000667 ! Fit after self-cal, rms=0.178994Jy sigma=0.000663 wmodel J1733-1304_S_2017_01_21_pus_map.mod ! Writing 130 model components to file: J1733-1304_S_2017_01_21_pus_map.mod wobs J1733-1304_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1733-1304_S_2017_01_21_pus_uvs.fits wwins J1733-1304_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1733-1304_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0046362 Jy ! Component: 100 - total flux cleaned = -0.00529276 Jy ! Component: 150 - total flux cleaned = -0.00764951 Jy ! Component: 200 - total flux cleaned = -0.0100763 Jy ! Component: 250 - total flux cleaned = -0.0128635 Jy ! Component: 300 - total flux cleaned = -0.0152522 Jy ! Component: 350 - total flux cleaned = -0.0168399 Jy ! Component: 400 - total flux cleaned = -0.0181503 Jy ! Component: 450 - total flux cleaned = -0.0194083 Jy ! Component: 500 - total flux cleaned = -0.0200111 Jy ! Component: 550 - total flux cleaned = -0.0205943 Jy ! Component: 600 - total flux cleaned = -0.0209719 Jy ! Component: 650 - total flux cleaned = -0.0218775 Jy ! Component: 700 - total flux cleaned = -0.022403 Jy ! Component: 750 - total flux cleaned = -0.0227468 Jy ! Component: 800 - total flux cleaned = -0.0232441 Jy ! Component: 850 - total flux cleaned = -0.0237251 Jy ! Component: 900 - total flux cleaned = -0.0235698 Jy ! Component: 950 - total flux cleaned = -0.0240283 Jy ! Component: 1000 - total flux cleaned = -0.0240254 Jy ! Component: 1050 - total flux cleaned = -0.0237365 Jy ! Component: 1100 - total flux cleaned = -0.0233112 Jy ! Component: 1150 - total flux cleaned = -0.0224771 Jy ! Component: 1200 - total flux cleaned = -0.0223438 Jy ! Component: 1250 - total flux cleaned = -0.022076 Jy ! Component: 1300 - total flux cleaned = -0.0218142 Jy ! Component: 1350 - total flux cleaned = -0.0215591 Jy ! Component: 1400 - total flux cleaned = -0.0210586 Jy ! Component: 1450 - total flux cleaned = -0.0210573 Jy ! Component: 1500 - total flux cleaned = -0.0206906 Jy ! Component: 1550 - total flux cleaned = -0.0209288 Jy ! Component: 1600 - total flux cleaned = -0.0211627 Jy ! Component: 1650 - total flux cleaned = -0.0210472 Jy ! Component: 1700 - total flux cleaned = -0.021506 Jy ! Component: 1750 - total flux cleaned = -0.0213922 Jy ! Component: 1800 - total flux cleaned = -0.0217279 Jy ! Component: 1850 - total flux cleaned = -0.0215065 Jy ! Component: 1900 - total flux cleaned = -0.0217264 Jy ! Component: 1950 - total flux cleaned = -0.021835 Jy ! Component: 2000 - total flux cleaned = -0.0219425 Jy ! Component: 2050 - total flux cleaned = -0.0221565 Jy ! Component: 2100 - total flux cleaned = -0.0222631 Jy ! Component: 2150 - total flux cleaned = -0.0223695 Jy ! Component: 2200 - total flux cleaned = -0.0227905 Jy ! Component: 2250 - total flux cleaned = -0.0228948 Jy ! Component: 2300 - total flux cleaned = -0.02279 Jy ! Component: 2350 - total flux cleaned = -0.0228951 Jy ! Component: 2400 - total flux cleaned = -0.0229986 Jy ! Component: 2450 - total flux cleaned = -0.0229987 Jy ! Component: 2500 - total flux cleaned = -0.022999 Jy ! Component: 2550 - total flux cleaned = -0.0231029 Jy ! Component: 2600 - total flux cleaned = -0.0232061 Jy ! Component: 2650 - total flux cleaned = -0.0234136 Jy ! Component: 2700 - total flux cleaned = -0.0234136 Jy ! Component: 2750 - total flux cleaned = -0.0236215 Jy ! Component: 2800 - total flux cleaned = -0.0237256 Jy ! Component: 2850 - total flux cleaned = -0.0238298 Jy ! Component: 2900 - total flux cleaned = -0.0237257 Jy ! Component: 2950 - total flux cleaned = -0.0241429 Jy ! Component: 3000 - total flux cleaned = -0.0240385 Jy ! Component: 3050 - total flux cleaned = -0.0239338 Jy ! Component: 3100 - total flux cleaned = -0.0239337 Jy ! Component: 3150 - total flux cleaned = -0.0242504 Jy ! Component: 3200 - total flux cleaned = -0.0241441 Jy ! Component: 3250 - total flux cleaned = -0.0239308 Jy ! Component: 3300 - total flux cleaned = -0.0237157 Jy ! Component: 3350 - total flux cleaned = -0.023608 Jy ! Component: 3400 - total flux cleaned = -0.0232817 Jy ! Component: 3450 - total flux cleaned = -0.0232811 Jy ! Component: 3500 - total flux cleaned = -0.0228414 Jy ! Component: 3550 - total flux cleaned = -0.0228422 Jy ! Component: 3600 - total flux cleaned = -0.0223963 Jy ! Component: 3650 - total flux cleaned = -0.0221705 Jy ! Component: 3700 - total flux cleaned = -0.0221697 Jy ! Component: 3750 - total flux cleaned = -0.0220552 Jy ! Component: 3800 - total flux cleaned = -0.0217083 Jy ! Component: 3850 - total flux cleaned = -0.0218249 Jy ! Component: 3900 - total flux cleaned = -0.021353 Jy ! Component: 3950 - total flux cleaned = -0.0213522 Jy ! Component: 4000 - total flux cleaned = -0.021233 Jy ! Component: 4050 - total flux cleaned = -0.0209899 Jy ! Total flux subtracted in 4096 components = -0.0207447 Jy ! Clean residual min=-0.007274 max=0.007023 Jy/beam ! Clean residual mean=-0.000126 rms=0.001984 Jy/beam ! Combined flux in latest and established models = 3.1368 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 407 components and 3.1368 Jy ![Exited script file: muppet] wmap "J1733-1304_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.603 x 6.745 at -2.071 degrees (North through East) ! Clean map min=-0.010218 max=2.1687 Jy/beam ! Writing clean map to FITS file: J1733-1304_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.16871 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00164838 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.228023 0.228023 0.456046 0.912093 1.82419 3.64837 7.29674 14.5935 29.187 58.3739 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0049 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.168 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.603 x 6.745 at -2.071 degrees (North through East) ! Clean map min=-0.010218 max=2.1687 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1733-1304_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:59:48 2019