! Started logfile: J1733-1304_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:19:25 2019 obs J1733-1304_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1733-1304_S_2017_01_16_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.671111 visibilities/baseline/integration-bin. ! Found source: J1733-1304 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1733-1304_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.681517Jy sigma=0.012263 ! Fit after self-cal, rms=1.677695Jy sigma=0.012238 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=11.43 mas, bpa=20.08 degrees ! Estimated noise=3128.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.90238 Jy ! Component: 100 - total flux cleaned = 2.37501 Jy ! Total flux subtracted in 100 components = 2.37501 Jy ! Clean residual min=-0.147149 max=0.209605 Jy/beam ! Clean residual mean=-0.000220 rms=0.044929 Jy/beam ! Combined flux in latest and established models = 2.37501 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 2.37501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.757759Jy sigma=0.005310 ! Fit after self-cal, rms=0.757448Jy sigma=0.005306 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.878 mas, bmaj=12.56 mas, bpa=20.04 degrees ! Estimated noise=2579.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.334606 Jy ! Component: 100 - total flux cleaned = 0.523333 Jy ! Component: 150 - total flux cleaned = 0.644826 Jy ! Component: 200 - total flux cleaned = 0.72701 Jy ! Total flux subtracted in 200 components = 0.72701 Jy ! Clean residual min=-0.148998 max=0.231826 Jy/beam ! Clean residual mean=0.000645 rms=0.042077 Jy/beam ! Combined flux in latest and established models = 3.10202 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 53 components and 3.10202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.634313Jy sigma=0.003890 ! Fit after self-cal, rms=0.632470Jy sigma=0.003871 ! Inverting map ! Added new window around map position (0, 23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.20078 Jy ! Component: 100 - total flux cleaned = 0.234628 Jy ! Component: 150 - total flux cleaned = 0.273781 Jy ! Component: 200 - total flux cleaned = 0.310513 Jy ! Total flux subtracted in 200 components = 0.310513 Jy ! Clean residual min=-0.108022 max=0.127555 Jy/beam ! Clean residual mean=0.000740 rms=0.033259 Jy/beam ! Combined flux in latest and established models = 3.41254 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 98 components and 3.41253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.572481Jy sigma=0.003250 ! Fit after self-cal, rms=0.566670Jy sigma=0.003206 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.91 HN 0.99 KP 0.94 ! LA 0.95 MK 1.00* NL 0.90 OV 0.98 ! PT 1.07 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.02 KP 0.92 ! LA 0.91 MK 1.00* NL 1.00 OV 1.02 ! PT 1.07 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 1.01 KP 0.96 ! LA 0.95 MK 1.00* NL 0.99 OV 0.93 ! PT 1.08 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 1.01 KP 1.03 ! LA 0.94 MK 1.00* NL 1.00* OV 0.91 ! PT 1.08 SC 1.28 ! ! ! Fit before self-cal, rms=0.566670Jy sigma=0.003206 ! Fit after self-cal, rms=0.505900Jy sigma=0.002820 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.905 mas, bmaj=12.59 mas, bpa=19.93 degrees ! Estimated noise=2521.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0638744 Jy ! Component: 100 - total flux cleaned = 0.0882781 Jy ! Component: 150 - total flux cleaned = 0.0900911 Jy ! Component: 200 - total flux cleaned = 0.0901777 Jy ! Total flux subtracted in 200 components = 0.0901777 Jy ! Clean residual min=-0.084180 max=0.088029 Jy/beam ! Clean residual mean=0.000758 rms=0.026677 Jy/beam ! Combined flux in latest and established models = 3.50271 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 136 components and 3.50271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.491269Jy sigma=0.002698 ! Fit after self-cal, rms=0.489725Jy sigma=0.002684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489725Jy sigma=0.002684 ! Fit after self-cal, rms=0.222649Jy sigma=0.001269 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.9 mas, bmaj=12.53 mas, bpa=19.78 degrees ! Estimated noise=2537.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0526364 Jy ! Component: 100 - total flux cleaned = 0.082186 Jy ! Component: 150 - total flux cleaned = 0.0957483 Jy ! Component: 200 - total flux cleaned = 0.0984343 Jy ! Total flux subtracted in 200 components = 0.0984343 Jy ! Clean residual min=-0.030494 max=0.037808 Jy/beam ! Clean residual mean=0.000199 rms=0.008873 Jy/beam ! Combined flux in latest and established models = 3.60115 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 173 components and 3.60115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214961Jy sigma=0.001114 ! Fit after self-cal, rms=0.213425Jy sigma=0.001094 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152133 Jy ! Component: 100 - total flux cleaned = 0.0219887 Jy ! Component: 150 - total flux cleaned = 0.0237011 Jy ! Component: 200 - total flux cleaned = 0.0246887 Jy ! Total flux subtracted in 200 components = 0.0246887 Jy ! Clean residual min=-0.026892 max=0.031928 Jy/beam ! Clean residual mean=0.000202 rms=0.008069 Jy/beam ! Combined flux in latest and established models = 3.62583 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 200 components and 3.62583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210994Jy sigma=0.001052 ! Fit after self-cal, rms=0.210579Jy sigma=0.001046 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210579Jy sigma=0.001046 ! Fit after self-cal, rms=0.161795Jy sigma=0.000863 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.894 mas, bmaj=12.49 mas, bpa=19.7 degrees ! Estimated noise=2533.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205624 Jy ! Component: 100 - total flux cleaned = 0.0263395 Jy ! Component: 150 - total flux cleaned = 0.0304764 Jy ! Component: 200 - total flux cleaned = 0.0322113 Jy ! Total flux subtracted in 200 components = 0.0322113 Jy ! Clean residual min=-0.018622 max=0.021174 Jy/beam ! Clean residual mean=0.000033 rms=0.005009 Jy/beam ! Combined flux in latest and established models = 3.65805 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 228 components and 3.65805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157176Jy sigma=0.000819 ! Fit after self-cal, rms=0.156961Jy sigma=0.000813 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31, 100). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012375 Jy ! Component: 100 - total flux cleaned = 0.0166485 Jy ! Component: 150 - total flux cleaned = 0.0188836 Jy ! Component: 200 - total flux cleaned = 0.0192505 Jy ! Total flux subtracted in 200 components = 0.0192505 Jy ! Clean residual min=-0.016499 max=0.017538 Jy/beam ! Clean residual mean=0.000015 rms=0.004352 Jy/beam ! Combined flux in latest and established models = 3.6773 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 256 components and 3.6773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153695Jy sigma=0.000780 ! Fit after self-cal, rms=0.153582Jy sigma=0.000777 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153582Jy sigma=0.000777 ! Fit after self-cal, rms=0.153318Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.828 mas, bmaj=16.24 mas, bpa=10.4 degrees ! Estimated noise=2963.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00888668 Jy ! Component: 100 - total flux cleaned = 0.00944676 Jy ! Component: 150 - total flux cleaned = 0.0101249 Jy ! Component: 200 - total flux cleaned = 0.0104086 Jy ! Total flux subtracted in 200 components = 0.0104086 Jy ! Clean residual min=-0.018439 max=0.017298 Jy/beam ! Clean residual mean=0.000023 rms=0.004682 Jy/beam ! Combined flux in latest and established models = 3.68771 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 290 components and 3.68771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151900Jy sigma=0.000754 ! Fit after self-cal, rms=0.151830Jy sigma=0.000752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154834 Jy ! Component: 100 - total flux cleaned = 0.00157142 Jy ! Component: 150 - total flux cleaned = 0.00133006 Jy ! Component: 200 - total flux cleaned = 0.00133208 Jy ! Total flux subtracted in 200 components = 0.00133208 Jy ! Clean residual min=-0.017158 max=0.016229 Jy/beam ! Clean residual mean=0.000021 rms=0.004387 Jy/beam ! Combined flux in latest and established models = 3.68904 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 317 components and 3.68904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151128Jy sigma=0.000746 ! Fit after self-cal, rms=0.151120Jy sigma=0.000745 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.891 mas, bmaj=12.47 mas, bpa=19.66 degrees ! Estimated noise=2533.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.891 x 12.47 at 19.66 degrees (North through East) ! Clean map min=-0.037245 max=2.4123 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151120Jy sigma=0.000745 ! Fit after self-cal, rms=0.143450Jy sigma=0.000695 ! Inverting map and beam ! Estimated beam: bmin=3.889 mas, bmaj=12.46 mas, bpa=19.65 degrees ! Estimated noise=2533.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00769483 Jy ! Component: 100 - total flux cleaned = 0.00769391 Jy ! Component: 150 - total flux cleaned = 0.00932409 Jy ! Component: 200 - total flux cleaned = 0.0102917 Jy ! Total flux subtracted in 200 components = 0.0102917 Jy ! Clean residual min=-0.013332 max=0.014249 Jy/beam ! Clean residual mean=0.000011 rms=0.003396 Jy/beam ! Combined flux in latest and established models = 3.69933 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 338 components and 3.69933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142156Jy sigma=0.000683 ! Fit after self-cal, rms=0.142148Jy sigma=0.000682 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184927 Jy ! Component: 100 - total flux cleaned = 0.00257948 Jy ! Component: 150 - total flux cleaned = 0.00301972 Jy ! Component: 200 - total flux cleaned = 0.00321996 Jy ! Total flux subtracted in 200 components = 0.00321996 Jy ! Clean residual min=-0.012515 max=0.013176 Jy/beam ! Clean residual mean=0.000012 rms=0.003240 Jy/beam ! Combined flux in latest and established models = 3.70255 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 352 components and 3.70255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141459Jy sigma=0.000675 ! Fit after self-cal, rms=0.141484Jy sigma=0.000674 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141484Jy sigma=0.000674 ! Fit after self-cal, rms=0.141605Jy sigma=0.000673 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=11.39 mas, bpa=19.73 degrees ! Estimated noise=3055.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.85337 Jy ! Component: 100 - total flux cleaned = 2.32935 Jy ! Component: 150 - total flux cleaned = 2.59786 Jy ! Component: 200 - total flux cleaned = 2.79055 Jy ! Total flux subtracted in 200 components = 2.79055 Jy ! Clean residual min=-0.066311 max=0.111491 Jy/beam ! Clean residual mean=-0.000267 rms=0.023135 Jy/beam ! Combined flux in latest and established models = 2.79055 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 2.79055 Jy ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=12.44 mas, bpa=19.62 degrees ! Estimated noise=2533.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.223663 Jy ! Component: 100 - total flux cleaned = 0.375738 Jy ! Component: 150 - total flux cleaned = 0.486725 Jy ! Component: 200 - total flux cleaned = 0.57147 Jy ! Total flux subtracted in 200 components = 0.57147 Jy ! Clean residual min=-0.036037 max=0.050908 Jy/beam ! Clean residual mean=-0.000027 rms=0.013022 Jy/beam ! Combined flux in latest and established models = 3.36202 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 127 components and 3.36202 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.815 mas, bmaj=16.21 mas, bpa=10.32 degrees ! Estimated noise=2969.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0966906 Jy ! Component: 100 - total flux cleaned = 0.160854 Jy ! Component: 150 - total flux cleaned = 0.207154 Jy ! Component: 200 - total flux cleaned = 0.241605 Jy ! Total flux subtracted in 200 components = 0.241605 Jy ! Clean residual min=-0.022646 max=0.029078 Jy/beam ! Clean residual mean=0.000009 rms=0.007730 Jy/beam ! Combined flux in latest and established models = 3.60362 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019776 Jy ! Component: 100 - total flux cleaned = 0.034397 Jy ! Component: 150 - total flux cleaned = 0.0467198 Jy ! Component: 200 - total flux cleaned = 0.0571644 Jy ! Total flux subtracted in 200 components = 0.0571644 Jy ! Clean residual min=-0.017898 max=0.019446 Jy/beam ! Clean residual mean=0.000005 rms=0.005277 Jy/beam ! Combined flux in latest and established models = 3.66079 Jy ! Adding 121 model components to the UV plane model. ! The established model now contains 232 components and 3.66079 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=12.44 mas, bpa=19.62 degrees ! Estimated noise=2533.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106138 Jy ! Component: 100 - total flux cleaned = 0.0217618 Jy ! Component: 150 - total flux cleaned = 0.0281135 Jy ! Component: 200 - total flux cleaned = 0.0328034 Jy ! Total flux subtracted in 200 components = 0.0328034 Jy ! Clean residual min=-0.014313 max=0.017183 Jy/beam ! Clean residual mean=0.000011 rms=0.004036 Jy/beam ! Combined flux in latest and established models = 3.69359 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 272 components and 3.69359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148310Jy sigma=0.000725 ! Fit after self-cal, rms=0.147542Jy sigma=0.000717 wmodel J1733-1304_S_2017_01_16_pus_map.mod ! Writing 272 model components to file: J1733-1304_S_2017_01_16_pus_map.mod wobs J1733-1304_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1733-1304_S_2017_01_16_pus_uvs.fits wwins J1733-1304_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J1733-1304_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00699075 Jy ! Component: 100 - total flux cleaned = 0.0104046 Jy ! Component: 150 - total flux cleaned = 0.013568 Jy ! Component: 200 - total flux cleaned = 0.016991 Jy ! Component: 250 - total flux cleaned = 0.0193791 Jy ! Component: 300 - total flux cleaned = 0.021437 Jy ! Component: 350 - total flux cleaned = 0.0232044 Jy ! Component: 400 - total flux cleaned = 0.0252846 Jy ! Component: 450 - total flux cleaned = 0.0265631 Jy ! Component: 500 - total flux cleaned = 0.0281606 Jy ! Component: 550 - total flux cleaned = 0.0293654 Jy ! Component: 600 - total flux cleaned = 0.0310411 Jy ! Component: 650 - total flux cleaned = 0.0321809 Jy ! Component: 700 - total flux cleaned = 0.0334507 Jy ! Component: 750 - total flux cleaned = 0.0342224 Jy ! Component: 800 - total flux cleaned = 0.0346706 Jy ! Component: 850 - total flux cleaned = 0.0346698 Jy ! Component: 900 - total flux cleaned = 0.0355366 Jy ! Component: 950 - total flux cleaned = 0.0353957 Jy ! Component: 1000 - total flux cleaned = 0.0356734 Jy ! Component: 1050 - total flux cleaned = 0.0358101 Jy ! Component: 1100 - total flux cleaned = 0.0360784 Jy ! Component: 1150 - total flux cleaned = 0.0360814 Jy ! Component: 1200 - total flux cleaned = 0.0360816 Jy ! Component: 1250 - total flux cleaned = 0.0363368 Jy ! Component: 1300 - total flux cleaned = 0.0362144 Jy ! Component: 1350 - total flux cleaned = 0.0367001 Jy ! Component: 1400 - total flux cleaned = 0.03634 Jy ! Component: 1450 - total flux cleaned = 0.0364582 Jy ! Component: 1500 - total flux cleaned = 0.0368057 Jy ! Component: 1550 - total flux cleaned = 0.036806 Jy ! Component: 1600 - total flux cleaned = 0.0365855 Jy ! Component: 1650 - total flux cleaned = 0.0369138 Jy ! Component: 1700 - total flux cleaned = 0.0370218 Jy ! Component: 1750 - total flux cleaned = 0.0371289 Jy ! Component: 1800 - total flux cleaned = 0.0375445 Jy ! Component: 1850 - total flux cleaned = 0.0375437 Jy ! Component: 1900 - total flux cleaned = 0.0375433 Jy ! Component: 1950 - total flux cleaned = 0.0382372 Jy ! Component: 2000 - total flux cleaned = 0.0381373 Jy ! Component: 2050 - total flux cleaned = 0.0381387 Jy ! Component: 2100 - total flux cleaned = 0.0383282 Jy ! Component: 2150 - total flux cleaned = 0.038516 Jy ! Component: 2200 - total flux cleaned = 0.0386992 Jy ! Component: 2250 - total flux cleaned = 0.0388807 Jy ! Component: 2300 - total flux cleaned = 0.0391511 Jy ! Component: 2350 - total flux cleaned = 0.0391517 Jy ! Component: 2400 - total flux cleaned = 0.0394156 Jy ! Component: 2450 - total flux cleaned = 0.0398456 Jy ! Component: 2500 - total flux cleaned = 0.040017 Jy ! Component: 2550 - total flux cleaned = 0.0403529 Jy ! Component: 2600 - total flux cleaned = 0.0406027 Jy ! Component: 2650 - total flux cleaned = 0.0407669 Jy ! Component: 2700 - total flux cleaned = 0.0411705 Jy ! Component: 2750 - total flux cleaned = 0.0412496 Jy ! Component: 2800 - total flux cleaned = 0.0413282 Jy ! Component: 2850 - total flux cleaned = 0.0413298 Jy ! Component: 2900 - total flux cleaned = 0.0413313 Jy ! Component: 2950 - total flux cleaned = 0.0416354 Jy ! Component: 3000 - total flux cleaned = 0.0419348 Jy ! Component: 3050 - total flux cleaned = 0.0419345 Jy ! Component: 3100 - total flux cleaned = 0.0419342 Jy ! Component: 3150 - total flux cleaned = 0.0420067 Jy ! Component: 3200 - total flux cleaned = 0.0424372 Jy ! Component: 3250 - total flux cleaned = 0.0425076 Jy ! Component: 3300 - total flux cleaned = 0.042929 Jy ! Component: 3350 - total flux cleaned = 0.0431379 Jy ! Component: 3400 - total flux cleaned = 0.0434127 Jy ! Component: 3450 - total flux cleaned = 0.0436163 Jy ! Component: 3500 - total flux cleaned = 0.0439539 Jy ! Component: 3550 - total flux cleaned = 0.0440876 Jy ! Component: 3600 - total flux cleaned = 0.044551 Jy ! Component: 3650 - total flux cleaned = 0.0452058 Jy ! Component: 3700 - total flux cleaned = 0.0455308 Jy ! Component: 3750 - total flux cleaned = 0.0457886 Jy ! Component: 3800 - total flux cleaned = 0.0461717 Jy ! Component: 3850 - total flux cleaned = 0.0468051 Jy ! Component: 3900 - total flux cleaned = 0.0471824 Jy ! Component: 3950 - total flux cleaned = 0.0474318 Jy ! Component: 4000 - total flux cleaned = 0.0480501 Jy ! Component: 4050 - total flux cleaned = 0.0482345 Jy ! Total flux subtracted in 4096 components = 0.0485395 Jy ! Clean residual min=-0.003182 max=0.003599 Jy/beam ! Clean residual mean=0.000010 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 3.74213 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 564 components and 3.74213 Jy ![Exited script file: muppet] wmap "J1733-1304_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.887 x 12.44 at 19.62 degrees (North through East) ! Clean map min=-0.022833 max=2.4501 Jy/beam ! Writing clean map to FITS file: J1733-1304_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.4501 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00118013 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.1445 0.1445 0.289001 0.578002 1.156 2.31201 4.62401 9.24803 18.4961 36.9921 73.9842 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.45 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.887 x 12.44 at 19.62 degrees (North through East) ! Clean map min=-0.022833 max=2.4501 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1733-1304_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:19:31 2019