! Started logfile: J1730+6025_S_2017_10_09_pus_uvs.log on Sun May 12 13:16:47 2019 obs J1730+6025_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1730+6025_S_2017_10_09_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.759323 visibilities/baseline/integration-bin. ! Found source: J1730+6025 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1730+6025_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 163 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 220 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 703 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968452Jy sigma=0.008682 ! Fit after self-cal, rms=0.945762Jy sigma=0.008503 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.148 mas, bmaj=4.577 mas, bpa=-37.48 degrees ! Estimated noise=1502.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435082 Jy ! Component: 100 - total flux cleaned = 0.0530604 Jy ! Total flux subtracted in 100 components = 0.0530604 Jy ! Clean residual min=-0.004508 max=0.004790 Jy/beam ! Clean residual mean=-0.000022 rms=0.001127 Jy/beam ! Combined flux in latest and established models = 0.0530604 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0530604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078897Jy sigma=0.000646 ! Fit after self-cal, rms=0.078645Jy sigma=0.000644 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.996 mas, bmaj=5.293 mas, bpa=-43.65 degrees ! Estimated noise=739.286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361113 Jy ! Component: 100 - total flux cleaned = 0.005076 Jy ! Component: 150 - total flux cleaned = 0.00588226 Jy ! Component: 200 - total flux cleaned = 0.00634629 Jy ! Total flux subtracted in 200 components = 0.00634629 Jy ! Clean residual min=-0.002401 max=0.003233 Jy/beam ! Clean residual mean=-0.000022 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.0594067 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 28 components and 0.0594067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078461Jy sigma=0.000643 ! Fit after self-cal, rms=0.078458Jy sigma=0.000643 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.99 KP 1.03 ! LA 1.00 MK 0.98 NL 1.08 OV 1.00* ! PT 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.01 KP 0.93 ! LA 0.97 MK 1.06 NL 1.44 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.06 KP 0.91 ! LA 0.78 MK 1.05 NL 1.20 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.91 KP 1.00* ! LA 0.83 MK 0.91 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.078458Jy sigma=0.000643 ! Fit after self-cal, rms=0.078848Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.033 mas, bmaj=5.288 mas, bpa=-43.45 degrees ! Estimated noise=743.933 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.35959e-05 Jy ! Component: 100 - total flux cleaned = 7.35431e-05 Jy ! Component: 150 - total flux cleaned = 6.14482e-05 Jy ! Component: 200 - total flux cleaned = 6.10754e-05 Jy ! Total flux subtracted in 200 components = 6.10754e-05 Jy ! Clean residual min=-0.002075 max=0.002011 Jy/beam ! Clean residual mean=0.000003 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0594678 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 36 components and 0.0594678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078845Jy sigma=0.000641 ! Fit after self-cal, rms=0.078904Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078904Jy sigma=0.000641 ! Fit after self-cal, rms=0.078014Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.027 mas, bmaj=5.308 mas, bpa=-42.72 degrees ! Estimated noise=743.026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381006 Jy ! Component: 100 - total flux cleaned = -0.000393481 Jy ! Component: 150 - total flux cleaned = -0.000393511 Jy ! Component: 200 - total flux cleaned = -0.000394208 Jy ! Total flux subtracted in 200 components = -0.000394208 Jy ! Clean residual min=-0.001894 max=0.001844 Jy/beam ! Clean residual mean=-0.000011 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0590736 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0590736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078009Jy sigma=0.000640 ! Fit after self-cal, rms=0.078035Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.52973e-06 Jy ! Component: 100 - total flux cleaned = -4.1964e-06 Jy ! Component: 150 - total flux cleaned = -1.35302e-05 Jy ! Component: 200 - total flux cleaned = -1.31892e-05 Jy ! Total flux subtracted in 200 components = -1.31892e-05 Jy ! Clean residual min=-0.001879 max=0.001813 Jy/beam ! Clean residual mean=-0.000009 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0590604 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0590604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078033Jy sigma=0.000639 ! Fit after self-cal, rms=0.078033Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078033Jy sigma=0.000639 ! Fit after self-cal, rms=0.078328Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=5.328 mas, bpa=-42.37 degrees ! Estimated noise=743.076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00034724 Jy ! Component: 100 - total flux cleaned = -0.000358058 Jy ! Component: 150 - total flux cleaned = -0.000349162 Jy ! Component: 200 - total flux cleaned = -0.000340878 Jy ! Total flux subtracted in 200 components = -0.000340878 Jy ! Clean residual min=-0.001881 max=0.001796 Jy/beam ! Clean residual mean=-0.000011 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0587195 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0587195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078325Jy sigma=0.000639 ! Fit after self-cal, rms=0.078338Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.94627e-05 Jy ! Component: 100 - total flux cleaned = -1.91104e-05 Jy ! Component: 150 - total flux cleaned = -1.90135e-05 Jy ! Component: 200 - total flux cleaned = -1.90402e-05 Jy ! Total flux subtracted in 200 components = -1.90402e-05 Jy ! Clean residual min=-0.001876 max=0.001804 Jy/beam ! Clean residual mean=-0.000010 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.0587005 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 46 components and 0.0587004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078336Jy sigma=0.000639 ! Fit after self-cal, rms=0.078336Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078336Jy sigma=0.000639 ! Fit after self-cal, rms=0.078481Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=9.913 mas, bpa=84.91 degrees ! Estimated noise=912.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.79558e-06 Jy ! Component: 100 - total flux cleaned = -1.33419e-05 Jy ! Component: 150 - total flux cleaned = -2.01456e-05 Jy ! Component: 200 - total flux cleaned = -1.99594e-05 Jy ! Total flux subtracted in 200 components = -1.99594e-05 Jy ! Clean residual min=-0.001916 max=0.001976 Jy/beam ! Clean residual mean=-0.000019 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0586805 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 52 components and 0.0586805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078481Jy sigma=0.000639 ! Fit after self-cal, rms=0.078487Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80013e-05 Jy ! Component: 100 - total flux cleaned = 3.09081e-05 Jy ! Component: 150 - total flux cleaned = 3.04968e-05 Jy ! Component: 200 - total flux cleaned = 3.63188e-05 Jy ! Total flux subtracted in 200 components = 3.63188e-05 Jy ! Clean residual min=-0.001923 max=0.001968 Jy/beam ! Clean residual mean=-0.000019 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0587168 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.0587168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078487Jy sigma=0.000639 ! Fit after self-cal, rms=0.078486Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.021 mas, bmaj=5.345 mas, bpa=-42.09 degrees ! Estimated noise=743.025 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.021 x 5.345 at -42.09 degrees (North through East) ! Clean map min=-0.0018209 max=0.056467 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=4.594 mas, bpa=-36.24 degrees ! Estimated noise=1403.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0432777 Jy ! Component: 100 - total flux cleaned = 0.0528172 Jy ! Component: 150 - total flux cleaned = 0.0553703 Jy ! Component: 200 - total flux cleaned = 0.0564968 Jy ! Total flux subtracted in 200 components = 0.0564968 Jy ! Clean residual min=-0.003538 max=0.003427 Jy/beam ! Clean residual mean=-0.000010 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.0564968 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0564968 Jy ! Inverting map and beam ! Estimated beam: bmin=4.021 mas, bmaj=5.345 mas, bpa=-42.09 degrees ! Estimated noise=743.025 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193248 Jy ! Component: 100 - total flux cleaned = 0.00198898 Jy ! Component: 150 - total flux cleaned = 0.00196018 Jy ! Component: 200 - total flux cleaned = 0.00191653 Jy ! Total flux subtracted in 200 components = 0.00191653 Jy ! Clean residual min=-0.001992 max=0.001882 Jy/beam ! Clean residual mean=-0.000011 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0584133 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 23 components and 0.0584133 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=9.913 mas, bpa=84.91 degrees ! Estimated noise=912.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253374 Jy ! Component: 100 - total flux cleaned = 0.00028273 Jy ! Component: 150 - total flux cleaned = 0.000281107 Jy ! Component: 200 - total flux cleaned = 0.000273327 Jy ! Total flux subtracted in 200 components = 0.000273327 Jy ! Clean residual min=-0.001927 max=0.001979 Jy/beam ! Clean residual mean=-0.000019 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0586867 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.58628e-07 Jy ! Component: 100 - total flux cleaned = 1.50982e-06 Jy ! Component: 150 - total flux cleaned = 2.43179e-06 Jy ! Component: 200 - total flux cleaned = 9.19493e-06 Jy ! Total flux subtracted in 200 components = 9.19493e-06 Jy ! Clean residual min=-0.001921 max=0.001974 Jy/beam ! Clean residual mean=-0.000019 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0586959 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 34 components and 0.0586959 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.021 mas, bmaj=5.345 mas, bpa=-42.09 degrees ! Estimated noise=743.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136927 Jy ! Component: 100 - total flux cleaned = -0.00018348 Jy ! Component: 150 - total flux cleaned = -0.000207609 Jy ! Component: 200 - total flux cleaned = -0.000217678 Jy ! Total flux subtracted in 200 components = -0.000217678 Jy ! Clean residual min=-0.001893 max=0.001819 Jy/beam ! Clean residual mean=-0.000010 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0584782 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0584782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078488Jy sigma=0.000639 ! Fit after self-cal, rms=0.078488Jy sigma=0.000639 wmodel J1730+6025_S_2017_10_09_pus_map.mod ! Writing 40 model components to file: J1730+6025_S_2017_10_09_pus_map.mod wobs J1730+6025_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1730+6025_S_2017_10_09_pus_uvs.fits wwins J1730+6025_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1730+6025_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.2862e-05 Jy ! Component: 100 - total flux cleaned = -0.000133353 Jy ! Component: 150 - total flux cleaned = -0.000276134 Jy ! Component: 200 - total flux cleaned = -0.000438142 Jy ! Component: 250 - total flux cleaned = -0.00048842 Jy ! Component: 300 - total flux cleaned = -0.000561302 Jy ! Component: 350 - total flux cleaned = -0.00074971 Jy ! Component: 400 - total flux cleaned = -0.000840418 Jy ! Component: 450 - total flux cleaned = -0.000928602 Jy ! Component: 500 - total flux cleaned = -0.000971139 Jy ! Component: 550 - total flux cleaned = -0.00101273 Jy ! Component: 600 - total flux cleaned = -0.00109402 Jy ! Component: 650 - total flux cleaned = -0.00113382 Jy ! Component: 700 - total flux cleaned = -0.00117228 Jy ! Component: 750 - total flux cleaned = -0.00126613 Jy ! Component: 800 - total flux cleaned = -0.00119337 Jy ! Component: 850 - total flux cleaned = -0.00117628 Jy ! Component: 900 - total flux cleaned = -0.00119373 Jy ! Component: 950 - total flux cleaned = -0.00112504 Jy ! Component: 1000 - total flux cleaned = -0.00112522 Jy ! Component: 1050 - total flux cleaned = -0.00109246 Jy ! Component: 1100 - total flux cleaned = -0.00106012 Jy ! Component: 1150 - total flux cleaned = -0.00102836 Jy ! Component: 1200 - total flux cleaned = -0.00102828 Jy ! Component: 1250 - total flux cleaned = -0.000966841 Jy ! Component: 1300 - total flux cleaned = -0.000951742 Jy ! Component: 1350 - total flux cleaned = -0.00089224 Jy ! Component: 1400 - total flux cleaned = -0.00083348 Jy ! Component: 1450 - total flux cleaned = -0.000804482 Jy ! Component: 1500 - total flux cleaned = -0.000761936 Jy ! Component: 1550 - total flux cleaned = -0.000747651 Jy ! Component: 1600 - total flux cleaned = -0.000665131 Jy ! Component: 1650 - total flux cleaned = -0.000678666 Jy ! Component: 1700 - total flux cleaned = -0.000611721 Jy ! Component: 1750 - total flux cleaned = -0.000558844 Jy ! Component: 1800 - total flux cleaned = -0.000571907 Jy ! Component: 1850 - total flux cleaned = -0.000520143 Jy ! Component: 1900 - total flux cleaned = -0.000494556 Jy ! Component: 1950 - total flux cleaned = -0.000419165 Jy ! Component: 2000 - total flux cleaned = -0.000369424 Jy ! Component: 2050 - total flux cleaned = -0.000332523 Jy ! Component: 2100 - total flux cleaned = -0.000271794 Jy ! Component: 2150 - total flux cleaned = -0.00028388 Jy ! Component: 2200 - total flux cleaned = -0.000236077 Jy ! Component: 2250 - total flux cleaned = -0.00021245 Jy ! Component: 2300 - total flux cleaned = -0.000177491 Jy ! Component: 2350 - total flux cleaned = -0.000154326 Jy ! Component: 2400 - total flux cleaned = -0.000108618 Jy ! Component: 2450 - total flux cleaned = -6.33783e-05 Jy ! Component: 2500 - total flux cleaned = -4.11018e-05 Jy ! Component: 2550 - total flux cleaned = -5.22614e-05 Jy ! Component: 2600 - total flux cleaned = 2.83841e-06 Jy ! Component: 2650 - total flux cleaned = 2.45506e-05 Jy ! Component: 2700 - total flux cleaned = -1.87565e-05 Jy ! Component: 2750 - total flux cleaned = 1.35519e-05 Jy ! Component: 2800 - total flux cleaned = 4.55331e-05 Jy ! Component: 2850 - total flux cleaned = 2.43646e-05 Jy ! Component: 2900 - total flux cleaned = 3.48805e-05 Jy ! Component: 2950 - total flux cleaned = 2.4502e-05 Jy ! Component: 3000 - total flux cleaned = 3.49451e-05 Jy ! Component: 3050 - total flux cleaned = 8.61509e-05 Jy ! Component: 3100 - total flux cleaned = 6.57711e-05 Jy ! Component: 3150 - total flux cleaned = 8.59026e-05 Jy ! Component: 3200 - total flux cleaned = 7.59403e-05 Jy ! Component: 3250 - total flux cleaned = 0.000105786 Jy ! Component: 3300 - total flux cleaned = 8.60051e-05 Jy ! Component: 3350 - total flux cleaned = 9.58734e-05 Jy ! Component: 3400 - total flux cleaned = 0.000115422 Jy ! Component: 3450 - total flux cleaned = 0.000144433 Jy ! Component: 3500 - total flux cleaned = 0.000134845 Jy ! Component: 3550 - total flux cleaned = 0.000125239 Jy ! Component: 3600 - total flux cleaned = 0.000134838 Jy ! Component: 3650 - total flux cleaned = 0.000134912 Jy ! Component: 3700 - total flux cleaned = 0.000144368 Jy ! Component: 3750 - total flux cleaned = 0.000162979 Jy ! Component: 3800 - total flux cleaned = 0.000153712 Jy ! Component: 3850 - total flux cleaned = 0.000144521 Jy ! Component: 3900 - total flux cleaned = 0.000153663 Jy ! Component: 3950 - total flux cleaned = 0.000162707 Jy ! Component: 4000 - total flux cleaned = 0.000153624 Jy ! Component: 4050 - total flux cleaned = 0.000171542 Jy ! Total flux subtracted in 4096 components = 0.000144658 Jy ! Clean residual min=-0.000715 max=0.000545 Jy/beam ! Clean residual mean=0.000003 rms=0.000154 Jy/beam ! Combined flux in latest and established models = 0.0586228 Jy keep ! Adding 248 model components to the UV plane model. ! The established model now contains 288 components and 0.0586228 Jy ![Exited script file: muppet] wmap "J1730+6025_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.021 x 5.345 at -42.09 degrees (North through East) ! Clean map min=-0.001114 max=0.056539 Jy/beam ! Writing clean map to FITS file: J1730+6025_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0565394 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153488 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.814414 0.814414 1.62883 3.25765 6.51531 13.0306 26.0612 52.1225 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.021 x 5.345 at -42.09 degrees (North through East) ! Clean map min=-0.001114 max=0.056539 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1730+6025_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:16:52 2019