! Started logfile: J1727+4530_X_2017_05_01_pus_uvs.log on Wed May  1 20:00:33 2019
obs J1727+4530_X_2017_05_01_pus_uva.fits
! Reading UV FITS file: J1727+4530_X_2017_05_01_pus_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.87037 visibilities/baseline/integration-bin.
! Found source: J1727+4530
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 863 lines of history.
! 
! Reading 11280 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1727+4530_X_2017_05_01_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.356222Jy  sigma=0.003263
! Fit after  self-cal, rms=0.349932Jy  sigma=0.003211
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8081 mas, bmaj=1.203 mas, bpa=-6.766 degrees
! Estimated noise=1189.37 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.851393 Jy
! Component: 100  -  total flux cleaned = 1.13693 Jy
! Total flux subtracted in 100 components = 1.13693 Jy
! Clean residual min=-0.031027 max=0.119746 Jy/beam
! Clean residual mean=-0.000222 rms=0.010082 Jy/beam
! Combined flux in latest and established models = 1.13693 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.13693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.220582Jy  sigma=0.002029
! Fit after  self-cal, rms=0.220418Jy  sigma=0.002027
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.122728 Jy
! Component: 100  -  total flux cleaned = 0.183798 Jy
! Total flux subtracted in 100 components = 0.183798 Jy
! Clean residual min=-0.015071 max=0.029501 Jy/beam
! Clean residual mean=-0.000058 rms=0.004445 Jy/beam
! Combined flux in latest and established models = 1.32072 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 14 components and 1.32072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.140099Jy  sigma=0.001057
! Fit after  self-cal, rms=0.140030Jy  sigma=0.001056
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0340684 Jy
! Component: 100  -  total flux cleaned = 0.0538329 Jy
! Total flux subtracted in 100 components = 0.0538329 Jy
! Clean residual min=-0.014394 max=0.016889 Jy/beam
! Clean residual mean=-0.000010 rms=0.003508 Jy/beam
! Combined flux in latest and established models = 1.37456 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 18 components and 1.37456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.132904Jy  sigma=0.000930
! Fit after  self-cal, rms=0.132888Jy  sigma=0.000930
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9971 mas, bmaj=1.46 mas, bpa=-5.852 degrees
! Estimated noise=743.779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130014 Jy
! Component: 100  -  total flux cleaned = 0.0192492 Jy
! Component: 150  -  total flux cleaned = 0.0202342 Jy
! Component: 200  -  total flux cleaned = 0.0209665 Jy
! Total flux subtracted in 200 components = 0.0209665 Jy
! Clean residual min=-0.011872 max=0.011489 Jy/beam
! Clean residual mean=0.000016 rms=0.002753 Jy/beam
! Combined flux in latest and established models = 1.39552 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 1.39552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.132348Jy  sigma=0.000911
! Fit after  self-cal, rms=0.132328Jy  sigma=0.000910
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.09     KP        1.03     
!   LA        0.94     MK        0.95     NL        0.95     OV        0.99     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.04     KP        1.01     
!   LA        0.95     MK        0.95     NL        0.96     OV        0.99     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.03     KP        1.02     
!   LA        0.98     MK        0.97     NL        0.95     OV        0.98     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.04     KP        1.02     
!   LA        0.99     MK        0.96     NL        0.95     OV        0.99     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.00     KP        1.02     
!   LA        0.98     MK        0.99     NL        0.98     OV        0.99     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.05     KP        1.02     
!   LA        0.98     MK        0.97     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.05     KP        1.02     
!   LA        0.99     MK        0.98     NL        0.97     OV        1.00     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.03     KP        1.02     
!   LA        0.97     MK        0.97     NL        0.99     OV        1.00     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.06     KP        1.02     
!   LA        0.99     MK        0.96     NL        0.98     OV        1.00     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.05     KP        1.02     
!   LA        1.00     MK        0.98     NL        0.99     OV        1.00     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.14     KP        1.09     
!   LA        1.05     MK        1.01     NL        1.04     OV        1.05     
!   PT        1.08     SC        1.07     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.08     KP        0.99     
!   LA        0.97     MK        0.98     NL        1.00     OV        1.00     
!   PT        1.04     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.132328Jy  sigma=0.000910
! Fit after  self-cal, rms=0.115450Jy  sigma=0.000718
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9973 mas, bmaj=1.462 mas, bpa=-6.308 degrees
! Estimated noise=742.168 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00372263 Jy
! Component: 100  -  total flux cleaned = -0.00372565 Jy
! Component: 150  -  total flux cleaned = -0.00372694 Jy
! Component: 200  -  total flux cleaned = -0.00362751 Jy
! Total flux subtracted in 200 components = -0.00362751 Jy
! Clean residual min=-0.005977 max=0.007375 Jy/beam
! Clean residual mean=0.000015 rms=0.001552 Jy/beam
! Combined flux in latest and established models = 1.3919 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 27 components and 1.3919 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115033Jy  sigma=0.000716
! Fit after  self-cal, rms=0.115037Jy  sigma=0.000716
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.115037Jy  sigma=0.000716
! Fit after  self-cal, rms=0.098750Jy  sigma=0.000662
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9965 mas, bmaj=1.463 mas, bpa=-6.199 degrees
! Estimated noise=742.337 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.66464e-06 Jy
! Component: 100  -  total flux cleaned = 0.000339761 Jy
! Component: 150  -  total flux cleaned = 0.000538093 Jy
! Component: 200  -  total flux cleaned = 0.000628289 Jy
! Total flux subtracted in 200 components = 0.000628289 Jy
! Clean residual min=-0.003894 max=0.003582 Jy/beam
! Clean residual mean=0.000021 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 1.39252 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 29 components and 1.39252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098470Jy  sigma=0.000660
! Fit after  self-cal, rms=0.098475Jy  sigma=0.000660
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000519156 Jy
! Component: 100  -  total flux cleaned = -0.000437473 Jy
! Component: 150  -  total flux cleaned = -0.000438487 Jy
! Component: 200  -  total flux cleaned = -0.000510719 Jy
! Total flux subtracted in 200 components = -0.000510719 Jy
! Clean residual min=-0.003746 max=0.003533 Jy/beam
! Clean residual mean=0.000019 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 1.39201 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 31 components and 1.39201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098337Jy  sigma=0.000658
! Fit after  self-cal, rms=0.098326Jy  sigma=0.000658
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098326Jy  sigma=0.000658
! Fit after  self-cal, rms=0.098337Jy  sigma=0.000657
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9961 mas, bmaj=1.461 mas, bpa=-6.523 degrees
! Estimated noise=741.851 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176433 Jy
! Component: 100  -  total flux cleaned = 0.000453232 Jy
! Component: 150  -  total flux cleaned = 0.000611473 Jy
! Component: 200  -  total flux cleaned = 0.000682725 Jy
! Total flux subtracted in 200 components = 0.000682725 Jy
! Clean residual min=-0.003498 max=0.003371 Jy/beam
! Clean residual mean=0.000021 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 1.3927 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 32 components and 1.3927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098165Jy  sigma=0.000656
! Fit after  self-cal, rms=0.098150Jy  sigma=0.000656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000415284 Jy
! Component: 100  -  total flux cleaned = -0.000480338 Jy
! Component: 150  -  total flux cleaned = -0.000541874 Jy
! Component: 200  -  total flux cleaned = -0.000544754 Jy
! Total flux subtracted in 200 components = -0.000544754 Jy
! Clean residual min=-0.003384 max=0.003317 Jy/beam
! Clean residual mean=0.000019 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 1.39215 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 33 components and 1.39215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098055Jy  sigma=0.000655
! Fit after  self-cal, rms=0.098048Jy  sigma=0.000655
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098048Jy  sigma=0.000655
! Fit after  self-cal, rms=0.098078Jy  sigma=0.000654
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.305 mas, bmaj=2.525 mas, bpa=-2.656 degrees
! Estimated noise=907.364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000443509 Jy
! Component: 100  -  total flux cleaned = -0.000442518 Jy
! Component: 150  -  total flux cleaned = -0.000444322 Jy
! Component: 200  -  total flux cleaned = -0.000447807 Jy
! Total flux subtracted in 200 components = -0.000447807 Jy
! Clean residual min=-0.002142 max=0.002421 Jy/beam
! Clean residual mean=0.000043 rms=0.000626 Jy/beam
! Combined flux in latest and established models = 1.3917 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 39 components and 1.3917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098059Jy  sigma=0.000654
! Fit after  self-cal, rms=0.098037Jy  sigma=0.000654
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.30711e-05 Jy
! Component: 100  -  total flux cleaned = -8.75998e-06 Jy
! Component: 150  -  total flux cleaned = 1.53643e-05 Jy
! Component: 200  -  total flux cleaned = 3.42908e-05 Jy
! Total flux subtracted in 200 components = 3.42908e-05 Jy
! Clean residual min=-0.002138 max=0.002416 Jy/beam
! Clean residual mean=0.000043 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 1.39174 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 42 components and 1.39174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098038Jy  sigma=0.000654
! Fit after  self-cal, rms=0.098017Jy  sigma=0.000654
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9959 mas, bmaj=1.46 mas, bpa=-6.757 degrees
! Estimated noise=741.577 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9959 x 1.46 at -6.757 degrees (North through East)
! Clean map  min=-0.002908  max=1.1224 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.098017Jy  sigma=0.000654
! Fit after  self-cal, rms=0.093415Jy  sigma=0.000613
! Inverting map and beam 
! Estimated beam: bmin=0.9957 mas, bmaj=1.46 mas, bpa=-6.896 degrees
! Estimated noise=741.345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000427328 Jy
! Component: 100  -  total flux cleaned = 0.000489655 Jy
! Component: 150  -  total flux cleaned = 0.000425374 Jy
! Component: 200  -  total flux cleaned = 0.000363479 Jy
! Total flux subtracted in 200 components = 0.000363479 Jy
! Clean residual min=-0.003216 max=0.003232 Jy/beam
! Clean residual mean=0.000019 rms=0.000688 Jy/beam
! Combined flux in latest and established models = 1.3921 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 42 components and 1.3921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093315Jy  sigma=0.000612
! Fit after  self-cal, rms=0.093310Jy  sigma=0.000612
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000149507 Jy
! Component: 100  -  total flux cleaned = -0.000209075 Jy
! Component: 150  -  total flux cleaned = -0.000320404 Jy
! Component: 200  -  total flux cleaned = -0.000375194 Jy
! Total flux subtracted in 200 components = -0.000375194 Jy
! Clean residual min=-0.003165 max=0.003177 Jy/beam
! Clean residual mean=0.000019 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 1.39173 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 43 components and 1.39173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093240Jy  sigma=0.000612
! Fit after  self-cal, rms=0.093236Jy  sigma=0.000612
! Inverting map 
! Added new window around map position (-2.8, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000439899 Jy
! Component: 100  -  total flux cleaned = 0.000450454 Jy
! Component: 150  -  total flux cleaned = 0.000450135 Jy
! Component: 200  -  total flux cleaned = 0.000446887 Jy
! Total flux subtracted in 200 components = 0.000446887 Jy
! Clean residual min=-0.002951 max=0.002505 Jy/beam
! Clean residual mean=0.000020 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 1.39217 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 57 components and 1.39217 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093049Jy  sigma=0.000610
! Fit after  self-cal, rms=0.093048Jy  sigma=0.000609
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093048Jy  sigma=0.000609
! Fit after  self-cal, rms=0.093099Jy  sigma=0.000609
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8051 mas, bmaj=1.203 mas, bpa=-8.012 degrees
! Estimated noise=1187.04 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.852058 Jy
! Component: 100  -  total flux cleaned = 1.14058 Jy
! Component: 150  -  total flux cleaned = 1.26368 Jy
! Component: 200  -  total flux cleaned = 1.32305 Jy
! Total flux subtracted in 200 components = 1.32305 Jy
! Clean residual min=-0.009670 max=0.028007 Jy/beam
! Clean residual mean=-0.000053 rms=0.002783 Jy/beam
! Combined flux in latest and established models = 1.32305 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 1.32305 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9955 mas, bmaj=1.459 mas, bpa=-7.037 degrees
! Estimated noise=741.235 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357908 Jy
! Component: 100  -  total flux cleaned = 0.0528043 Jy
! Component: 150  -  total flux cleaned = 0.0616494 Jy
! Component: 200  -  total flux cleaned = 0.0652096 Jy
! Total flux subtracted in 200 components = 0.0652096 Jy
! Clean residual min=-0.003644 max=0.005349 Jy/beam
! Clean residual mean=0.000010 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 1.38826 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 1.38826 Jy
! Inverting map 
! Added new window around map position (-1, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274691 Jy
! Component: 100  -  total flux cleaned = 0.00400496 Jy
! Component: 150  -  total flux cleaned = 0.00483986 Jy
! Component: 200  -  total flux cleaned = 0.00522318 Jy
! Total flux subtracted in 200 components = 0.00522318 Jy
! Clean residual min=-0.003279 max=0.003253 Jy/beam
! Clean residual mean=0.000021 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 1.39348 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 1.39348 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.304 mas, bmaj=2.525 mas, bpa=-2.923 degrees
! Estimated noise=907.23 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164673 Jy
! Component: 100  -  total flux cleaned = 9.16654e-05 Jy
! Component: 150  -  total flux cleaned = 5.91296e-05 Jy
! Component: 200  -  total flux cleaned = 3.25615e-05 Jy
! Total flux subtracted in 200 components = 3.25615e-05 Jy
! Clean residual min=-0.002179 max=0.002143 Jy/beam
! Clean residual mean=0.000045 rms=0.000579 Jy/beam
! Combined flux in latest and established models = 1.39352 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.14164e-05 Jy
! Component: 100  -  total flux cleaned = -2.00093e-05 Jy
! Component: 150  -  total flux cleaned = -1.99889e-05 Jy
! Component: 200  -  total flux cleaned = -2.0057e-05 Jy
! Total flux subtracted in 200 components = -2.0057e-05 Jy
! Clean residual min=-0.002146 max=0.002098 Jy/beam
! Clean residual mean=0.000045 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 1.3935 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 52 components and 1.3935 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9955 mas, bmaj=1.459 mas, bpa=-7.037 degrees
! Estimated noise=741.235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.37035e-05 Jy
! Component: 100  -  total flux cleaned = 0.000385985 Jy
! Component: 150  -  total flux cleaned = 0.000487353 Jy
! Component: 200  -  total flux cleaned = 0.000584973 Jy
! Total flux subtracted in 200 components = 0.000584973 Jy
! Clean residual min=-0.002988 max=0.002710 Jy/beam
! Clean residual mean=0.000021 rms=0.000648 Jy/beam
! Combined flux in latest and established models = 1.39408 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 56 components and 1.39408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093214Jy  sigma=0.000611
! Fit after  self-cal, rms=0.093195Jy  sigma=0.000611
wmodel J1727+4530_X_2017_05_01_pus_map.mod
! Writing 56 model components to file: J1727+4530_X_2017_05_01_pus_map.mod
wobs J1727+4530_X_2017_05_01_pus_uvs.fits
! Writing UV FITS file: J1727+4530_X_2017_05_01_pus_uvs.fits
wwins J1727+4530_X_2017_05_01_pus_map.win
! wwins: Wrote 3 windows to J1727+4530_X_2017_05_01_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108985 Jy
! Component: 100  -  total flux cleaned = -0.00172327 Jy
! Component: 150  -  total flux cleaned = -0.00231594 Jy
! Component: 200  -  total flux cleaned = -0.0028789 Jy
! Component: 250  -  total flux cleaned = -0.00321063 Jy
! Component: 300  -  total flux cleaned = -0.00329054 Jy
! Component: 350  -  total flux cleaned = -0.00332953 Jy
! Component: 400  -  total flux cleaned = -0.00329146 Jy
! Component: 450  -  total flux cleaned = -0.0032545 Jy
! Component: 500  -  total flux cleaned = -0.00325466 Jy
! Component: 550  -  total flux cleaned = -0.00325397 Jy
! Component: 600  -  total flux cleaned = -0.0031122 Jy
! Component: 650  -  total flux cleaned = -0.00314726 Jy
! Component: 700  -  total flux cleaned = -0.00311294 Jy
! Component: 750  -  total flux cleaned = -0.00314644 Jy
! Component: 800  -  total flux cleaned = -0.00314595 Jy
! Component: 850  -  total flux cleaned = -0.00317842 Jy
! Component: 900  -  total flux cleaned = -0.00317767 Jy
! Component: 950  -  total flux cleaned = -0.00314544 Jy
! Component: 1000  -  total flux cleaned = -0.00324024 Jy
! Component: 1050  -  total flux cleaned = -0.00330271 Jy
! Component: 1100  -  total flux cleaned = -0.00330232 Jy
! Component: 1150  -  total flux cleaned = -0.00324096 Jy
! Component: 1200  -  total flux cleaned = -0.0032411 Jy
! Component: 1250  -  total flux cleaned = -0.00333038 Jy
! Component: 1300  -  total flux cleaned = -0.00330099 Jy
! Component: 1350  -  total flux cleaned = -0.003243 Jy
! Component: 1400  -  total flux cleaned = -0.00335935 Jy
! Component: 1450  -  total flux cleaned = -0.00338802 Jy
! Component: 1500  -  total flux cleaned = -0.00344438 Jy
! Component: 1550  -  total flux cleaned = -0.00324786 Jy
! Component: 1600  -  total flux cleaned = -0.00335947 Jy
! Component: 1650  -  total flux cleaned = -0.00338693 Jy
! Component: 1700  -  total flux cleaned = -0.00335962 Jy
! Component: 1750  -  total flux cleaned = -0.00330531 Jy
! Component: 1800  -  total flux cleaned = -0.00309026 Jy
! Component: 1850  -  total flux cleaned = -0.00311711 Jy
! Component: 1900  -  total flux cleaned = -0.00306427 Jy
! Component: 1950  -  total flux cleaned = -0.00295913 Jy
! Component: 2000  -  total flux cleaned = -0.00290726 Jy
! Total flux subtracted in 2048 components = -0.00290748 Jy
! Clean residual min=-0.001325 max=0.001681 Jy/beam
! Clean residual mean=0.000012 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 1.39117 Jy
keep
! Adding 153 model components to the UV plane model.
! The established model now contains 209 components and 1.39117 Jy
![Exited script file: muppet]
wmap "J1727+4530_X_2017_05_01_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9955 x 1.459 at -7.037 degrees (North through East)
! Clean map  min=-0.0021663  max=1.1192 Jy/beam
! Writing clean map to FITS file: J1727+4530_X_2017_05_01_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.11923 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000454474 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.121818 0.121818 0.243635 0.48727 0.97454 1.94908 3.89816 7.79632 15.5926 31.1853 62.3706
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.119 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9955 x 1.459 at -7.037 degrees (North through East)
! Clean map  min=-0.0021663  max=1.1192 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J1727+4530_X_2017_05_01_pus_uvs.log closed on Wed May  1 20:00:34 2019