! Started logfile: J1726+0639_X_2017_06_15_pus_uvs.log on Tue May  7 19:59:44 2019
obs J1726+0639_X_2017_06_15_pus_uva.fits
! Reading UV FITS file: J1726+0639_X_2017_06_15_pus_uva.fits
! AN table 1: 151 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.74908 visibilities/baseline/integration-bin.
! Found source: J1726+0639
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 989 lines of history.
! 
! Reading 61080 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1726+0639_X_2017_06_15_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 382 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 392 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 386 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 388 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 392 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 383 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 386 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 389 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 403 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 385 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 425 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 408 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.889761Jy  sigma=0.007302
! Fit after  self-cal, rms=0.874793Jy  sigma=0.007211
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7312 mas, bmaj=1.711 mas, bpa=-2.079 degrees
! Estimated noise=696.849 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0994654 Jy
! Component: 100  -  total flux cleaned = 0.123182 Jy
! Total flux subtracted in 100 components = 0.123182 Jy
! Clean residual min=-0.003248 max=0.009088 Jy/beam
! Clean residual mean=-0.000012 rms=0.000999 Jy/beam
! Combined flux in latest and established models = 0.123182 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.123182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091615Jy  sigma=0.000665
! Fit after  self-cal, rms=0.091602Jy  sigma=0.000665
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00934334 Jy
! Component: 100  -  total flux cleaned = 0.0138676 Jy
! Total flux subtracted in 100 components = 0.0138676 Jy
! Clean residual min=-0.002683 max=0.003376 Jy/beam
! Clean residual mean=-0.000004 rms=0.000700 Jy/beam
! Combined flux in latest and established models = 0.13705 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 19 components and 0.13705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090635Jy  sigma=0.000654
! Fit after  self-cal, rms=0.090637Jy  sigma=0.000654
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9139 mas, bmaj=1.996 mas, bpa=-2.246 degrees
! Estimated noise=360.038 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00481333 Jy
! Component: 100  -  total flux cleaned = 0.00764712 Jy
! Component: 150  -  total flux cleaned = 0.00945014 Jy
! Component: 200  -  total flux cleaned = 0.0101658 Jy
! Total flux subtracted in 200 components = 0.0101658 Jy
! Clean residual min=-0.001870 max=0.002168 Jy/beam
! Clean residual mean=-0.000000 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.147215 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 49 components and 0.147215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090371Jy  sigma=0.000651
! Fit after  self-cal, rms=0.090364Jy  sigma=0.000651
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.07     KP        1.02     
!   LA        0.97     MK        0.98     NL        0.93     OV        1.01     
!   PT        1.02     SC        1.07     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.02     KP        0.99     
!   LA        0.97     MK        0.98     NL        0.96     OV        0.97     
!   PT        1.03     SC        1.06     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.01     KP        1.01     
!   LA        1.00     MK        0.99     NL        0.94     OV        1.01     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        1.02     KP        1.01     
!   LA        0.99     MK        1.01     NL        0.99     OV        1.00     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        1.01     
!   LA        1.00     MK        1.02     NL        0.94     OV        0.99     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.05     KP        1.01     
!   LA        0.98     MK        1.02     NL        0.96     OV        0.97     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.04     KP        1.01     
!   LA        1.02     MK        1.01     NL        0.98     OV        1.00     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.01     NL        0.98     OV        1.01     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 9.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        1.03     
!   LA        1.00     MK        0.99     NL        0.93     OV        0.98     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 10.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.08     KP        1.00     
!   LA        1.01     MK        1.01     NL        0.98     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.97     HN        1.09     KP        1.00     
!   LA        1.00     MK        1.02     NL        0.97     OV        1.00     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 12.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.04     KP        1.01     
!   LA        0.98     MK        1.02     NL        0.94     OV        0.98     
!   PT        1.03     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.090364Jy  sigma=0.000651
! Fit after  self-cal, rms=0.090487Jy  sigma=0.000649
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9213 mas, bmaj=2.009 mas, bpa=-2.575 degrees
! Estimated noise=359.115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.6, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103279 Jy
! Component: 100  -  total flux cleaned = 0.00108987 Jy
! Component: 150  -  total flux cleaned = 0.00104961 Jy
! Component: 200  -  total flux cleaned = 0.000978207 Jy
! Total flux subtracted in 200 components = 0.000978207 Jy
! Clean residual min=-0.001405 max=0.001525 Jy/beam
! Clean residual mean=0.000002 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.148194 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 76 components and 0.148194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090428Jy  sigma=0.000649
! Fit after  self-cal, rms=0.090443Jy  sigma=0.000649
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090443Jy  sigma=0.000649
! Fit after  self-cal, rms=0.091184Jy  sigma=0.000648
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9216 mas, bmaj=2.008 mas, bpa=-2.625 degrees
! Estimated noise=359.749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000556256 Jy
! Component: 100  -  total flux cleaned = 0.000557609 Jy
! Component: 150  -  total flux cleaned = 0.000481569 Jy
! Component: 200  -  total flux cleaned = 0.000504314 Jy
! Total flux subtracted in 200 components = 0.000504314 Jy
! Clean residual min=-0.001155 max=0.001249 Jy/beam
! Clean residual mean=-0.000001 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.148698 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 98 components and 0.148698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091164Jy  sigma=0.000648
! Fit after  self-cal, rms=0.091175Jy  sigma=0.000648
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000216364 Jy
! Component: 100  -  total flux cleaned = 0.000261146 Jy
! Component: 150  -  total flux cleaned = 0.000260015 Jy
! Component: 200  -  total flux cleaned = 0.000242122 Jy
! Total flux subtracted in 200 components = 0.000242122 Jy
! Clean residual min=-0.001148 max=0.001233 Jy/beam
! Clean residual mean=-0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.14894 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 103 components and 0.14894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091163Jy  sigma=0.000648
! Fit after  self-cal, rms=0.091163Jy  sigma=0.000648
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091163Jy  sigma=0.000648
! Fit after  self-cal, rms=0.092153Jy  sigma=0.000647
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9218 mas, bmaj=2.006 mas, bpa=-2.569 degrees
! Estimated noise=360.121 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000445967 Jy
! Component: 100  -  total flux cleaned = 0.000483507 Jy
! Component: 150  -  total flux cleaned = 0.000545129 Jy
! Component: 200  -  total flux cleaned = 0.000531136 Jy
! Total flux subtracted in 200 components = 0.000531136 Jy
! Clean residual min=-0.000949 max=0.001026 Jy/beam
! Clean residual mean=-0.000001 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.149471 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 124 components and 0.149471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092145Jy  sigma=0.000646
! Fit after  self-cal, rms=0.092164Jy  sigma=0.000646
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.82758e-05 Jy
! Component: 100  -  total flux cleaned = 6.62311e-05 Jy
! Component: 150  -  total flux cleaned = 6.68358e-05 Jy
! Component: 200  -  total flux cleaned = 5.60537e-05 Jy
! Total flux subtracted in 200 components = 5.60537e-05 Jy
! Clean residual min=-0.000925 max=0.001019 Jy/beam
! Clean residual mean=-0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.149527 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 129 components and 0.149527 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092159Jy  sigma=0.000646
! Fit after  self-cal, rms=0.092158Jy  sigma=0.000646
! Inverting map 
! Added new window around map position (-7.6, -6.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000574507 Jy
! Component: 100  -  total flux cleaned = 0.000685929 Jy
! Component: 150  -  total flux cleaned = 0.000786266 Jy
! Component: 200  -  total flux cleaned = 0.000854758 Jy
! Total flux subtracted in 200 components = 0.000854758 Jy
! Clean residual min=-0.000874 max=0.000805 Jy/beam
! Clean residual mean=-0.000001 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.150382 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 147 components and 0.150382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092148Jy  sigma=0.000646
! Fit after  self-cal, rms=0.092146Jy  sigma=0.000646
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092146Jy  sigma=0.000646
! Fit after  self-cal, rms=0.092128Jy  sigma=0.000646
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.26 mas, bmaj=3.168 mas, bpa=3.81 degrees
! Estimated noise=435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000363748 Jy
! Component: 100  -  total flux cleaned = 0.000470797 Jy
! Component: 150  -  total flux cleaned = 0.000557438 Jy
! Component: 200  -  total flux cleaned = 0.000597912 Jy
! Total flux subtracted in 200 components = 0.000597912 Jy
! Clean residual min=-0.000919 max=0.000877 Jy/beam
! Clean residual mean=-0.000003 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.15098 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 167 components and 0.15098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092125Jy  sigma=0.000646
! Fit after  self-cal, rms=0.092124Jy  sigma=0.000646
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.41746e-06 Jy
! Component: 100  -  total flux cleaned = 6.66881e-05 Jy
! Component: 150  -  total flux cleaned = 8.39958e-05 Jy
! Component: 200  -  total flux cleaned = 9.1443e-05 Jy
! Total flux subtracted in 200 components = 9.1443e-05 Jy
! Clean residual min=-0.000882 max=0.000882 Jy/beam
! Clean residual mean=-0.000003 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.151071 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 176 components and 0.151071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092123Jy  sigma=0.000646
! Fit after  self-cal, rms=0.092122Jy  sigma=0.000646
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9218 mas, bmaj=2.005 mas, bpa=-2.561 degrees
! Estimated noise=360.101 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9218 x 2.005 at -2.561 degrees (North through East)
! Clean map  min=-0.00089365  max=0.12727 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7371 mas, bmaj=1.715 mas, bpa=-2.335 degrees
! Estimated noise=765.5 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0992295 Jy
! Component: 100  -  total flux cleaned = 0.123274 Jy
! Component: 150  -  total flux cleaned = 0.132884 Jy
! Component: 200  -  total flux cleaned = 0.137576 Jy
! Total flux subtracted in 200 components = 0.137576 Jy
! Clean residual min=-0.001746 max=0.002359 Jy/beam
! Clean residual mean=-0.000008 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.137576 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.137576 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9218 mas, bmaj=2.005 mas, bpa=-2.561 degrees
! Estimated noise=360.101 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00428858 Jy
! Component: 100  -  total flux cleaned = 0.00697448 Jy
! Component: 150  -  total flux cleaned = 0.00878627 Jy
! Component: 200  -  total flux cleaned = 0.0101282 Jy
! Total flux subtracted in 200 components = 0.0101282 Jy
! Clean residual min=-0.000993 max=0.000838 Jy/beam
! Clean residual mean=-0.000005 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.147704 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 62 components and 0.147704 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.26 mas, bmaj=3.168 mas, bpa=3.81 degrees
! Estimated noise=435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151026 Jy
! Component: 100  -  total flux cleaned = 0.00210698 Jy
! Component: 150  -  total flux cleaned = 0.00227794 Jy
! Component: 200  -  total flux cleaned = 0.00250668 Jy
! Total flux subtracted in 200 components = 0.00250668 Jy
! Clean residual min=-0.000997 max=0.000794 Jy/beam
! Clean residual mean=-0.000005 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.150211 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193015 Jy
! Component: 100  -  total flux cleaned = 0.00035765 Jy
! Component: 150  -  total flux cleaned = 0.000498622 Jy
! Component: 200  -  total flux cleaned = 0.000608482 Jy
! Total flux subtracted in 200 components = 0.000608482 Jy
! Clean residual min=-0.000929 max=0.000843 Jy/beam
! Clean residual mean=-0.000004 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.150819 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 112 components and 0.150819 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9218 mas, bmaj=2.005 mas, bpa=-2.561 degrees
! Estimated noise=360.101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.51436e-05 Jy
! Component: 100  -  total flux cleaned = -3.27456e-05 Jy
! Component: 150  -  total flux cleaned = 1.41862e-05 Jy
! Component: 200  -  total flux cleaned = 4.31511e-05 Jy
! Total flux subtracted in 200 components = 4.31511e-05 Jy
! Clean residual min=-0.000822 max=0.000868 Jy/beam
! Clean residual mean=-0.000002 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.150862 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 131 components and 0.150862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092126Jy  sigma=0.000646
! Fit after  self-cal, rms=0.092124Jy  sigma=0.000646
wmodel J1726+0639_X_2017_06_15_pus_map.mod
! Writing 131 model components to file: J1726+0639_X_2017_06_15_pus_map.mod
wobs J1726+0639_X_2017_06_15_pus_uvs.fits
! Writing UV FITS file: J1726+0639_X_2017_06_15_pus_uvs.fits
wwins J1726+0639_X_2017_06_15_pus_map.win
! wwins: Wrote 4 windows to J1726+0639_X_2017_06_15_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.28737e-05 Jy
! Component: 100  -  total flux cleaned = -0.000178951 Jy
! Component: 150  -  total flux cleaned = -0.000230469 Jy
! Component: 200  -  total flux cleaned = -0.000254899 Jy
! Component: 250  -  total flux cleaned = -0.000278605 Jy
! Component: 300  -  total flux cleaned = -0.000313264 Jy
! Component: 350  -  total flux cleaned = -0.000358491 Jy
! Component: 400  -  total flux cleaned = -0.00041372 Jy
! Component: 450  -  total flux cleaned = -0.000467831 Jy
! Component: 500  -  total flux cleaned = -0.000531341 Jy
! Component: 550  -  total flux cleaned = -0.000572874 Jy
! Component: 600  -  total flux cleaned = -0.000623938 Jy
! Component: 650  -  total flux cleaned = -0.000663971 Jy
! Component: 700  -  total flux cleaned = -0.000693663 Jy
! Component: 750  -  total flux cleaned = -0.000732551 Jy
! Component: 800  -  total flux cleaned = -0.000780672 Jy
! Component: 850  -  total flux cleaned = -0.000827985 Jy
! Component: 900  -  total flux cleaned = -0.000874793 Jy
! Component: 950  -  total flux cleaned = -0.000920907 Jy
! Component: 1000  -  total flux cleaned = -0.000957301 Jy
! Component: 1050  -  total flux cleaned = -0.000966242 Jy
! Component: 1100  -  total flux cleaned = -0.000993035 Jy
! Component: 1150  -  total flux cleaned = -0.00101972 Jy
! Component: 1200  -  total flux cleaned = -0.00104595 Jy
! Component: 1250  -  total flux cleaned = -0.00103739 Jy
! Component: 1300  -  total flux cleaned = -0.00104601 Jy
! Component: 1350  -  total flux cleaned = -0.00107153 Jy
! Component: 1400  -  total flux cleaned = -0.00108827 Jy
! Component: 1450  -  total flux cleaned = -0.00107173 Jy
! Component: 1500  -  total flux cleaned = -0.00109634 Jy
! Component: 1550  -  total flux cleaned = -0.00108826 Jy
! Component: 1600  -  total flux cleaned = -0.00111249 Jy
! Component: 1650  -  total flux cleaned = -0.00112034 Jy
! Component: 1700  -  total flux cleaned = -0.00111241 Jy
! Component: 1750  -  total flux cleaned = -0.00111235 Jy
! Component: 1800  -  total flux cleaned = -0.00109679 Jy
! Component: 1850  -  total flux cleaned = -0.00112766 Jy
! Component: 1900  -  total flux cleaned = -0.00110455 Jy
! Component: 1950  -  total flux cleaned = -0.00108179 Jy
! Component: 2000  -  total flux cleaned = -0.00107416 Jy
! Total flux subtracted in 2048 components = -0.00107406 Jy
! Clean residual min=-0.000465 max=0.000423 Jy/beam
! Clean residual mean=-0.000001 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.149788 Jy
keep
! Adding 160 model components to the UV plane model.
! The established model now contains 291 components and 0.149788 Jy
![Exited script file: muppet]
wmap "J1726+0639_X_2017_06_15_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9218 x 2.005 at -2.561 degrees (North through East)
! Clean map  min=-0.00077355  max=0.12739 Jy/beam
! Writing clean map to FITS file: J1726+0639_X_2017_06_15_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.127388 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000142984 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.336728 0.336728 0.673456 1.34691 2.69383 5.38765 10.7753 21.5506 43.1012 86.2024
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.127 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9218 x 2.005 at -2.561 degrees (North through East)
! Clean map  min=-0.00077355  max=0.12739 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J1726+0639_X_2017_06_15_pus_uvs.log closed on Tue May  7 19:59:48 2019