! Started logfile: J1725+7726_S_2017_10_21_pus_uvs.log on Sat May 11 21:03:05 2019 obs J1725+7726_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1725+7726_S_2017_10_21_pus_uva.fits ! AN table 1: 172 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.978682 visibilities/baseline/integration-bin. ! Found source: J1725+7726 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 24240 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1725+7726_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 753 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.933971Jy sigma=0.008141 ! Fit after self-cal, rms=0.913381Jy sigma=0.007963 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=3.987 mas, bpa=-16.7 degrees ! Estimated noise=1022.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0643512 Jy ! Component: 100 - total flux cleaned = 0.0909987 Jy ! Total flux subtracted in 100 components = 0.0909987 Jy ! Clean residual min=-0.013823 max=0.020425 Jy/beam ! Clean residual mean=0.000136 rms=0.004509 Jy/beam ! Combined flux in latest and established models = 0.0909987 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.0909987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131911Jy sigma=0.001137 ! Fit after self-cal, rms=0.131725Jy sigma=0.001135 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.165 mas, bmaj=4.813 mas, bpa=-22.4 degrees ! Estimated noise=624.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0290414 Jy ! Component: 100 - total flux cleaned = 0.0446902 Jy ! Component: 150 - total flux cleaned = 0.0533094 Jy ! Component: 200 - total flux cleaned = 0.0580607 Jy ! Total flux subtracted in 200 components = 0.0580607 Jy ! Clean residual min=-0.019238 max=0.024047 Jy/beam ! Clean residual mean=0.000356 rms=0.006209 Jy/beam ! Combined flux in latest and established models = 0.149059 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 48 components and 0.149059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126232Jy sigma=0.001073 ! Fit after self-cal, rms=0.126009Jy sigma=0.001071 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.64 FD 1.04 HN 1.31 KP 0.91 ! LA 1.00 MK 0.90 NL 1.29 OV 1.41 ! PT 0.64 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.81 FD 1.11 HN 1.36 KP 0.93 ! LA 0.99 MK 1.00 NL 1.07 OV 1.74 ! PT 0.59 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 1.15 HN 1.29 KP 1.00 ! LA 0.79 MK 0.83 NL 1.44 OV 1.62 ! PT 0.64 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.18 HN 1.42 KP 1.00* ! LA 0.78 MK 0.89 NL 1.00* OV 1.00* ! PT 0.62 ! ! ! Fit before self-cal, rms=0.126009Jy sigma=0.001071 ! Fit after self-cal, rms=0.143495Jy sigma=0.001001 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.17 mas, bmaj=4.825 mas, bpa=-18.97 degrees ! Estimated noise=649.341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (48.5, -101). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029328 Jy ! Component: 100 - total flux cleaned = 0.0462333 Jy ! Component: 150 - total flux cleaned = 0.0570789 Jy ! Component: 200 - total flux cleaned = 0.0649444 Jy ! Total flux subtracted in 200 components = 0.0649444 Jy ! Clean residual min=-0.011586 max=0.015589 Jy/beam ! Clean residual mean=0.000233 rms=0.003981 Jy/beam ! Combined flux in latest and established models = 0.214004 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 123 components and 0.214004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138552Jy sigma=0.000897 ! Fit after self-cal, rms=0.139593Jy sigma=0.000876 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139593Jy sigma=0.000876 ! Fit after self-cal, rms=0.177876Jy sigma=0.000823 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.23 mas, bmaj=4.824 mas, bpa=-27.12 degrees ! Estimated noise=621.715 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00933171 Jy ! Component: 100 - total flux cleaned = 0.0129363 Jy ! Component: 150 - total flux cleaned = 0.0148756 Jy ! Component: 200 - total flux cleaned = 0.0160252 Jy ! Total flux subtracted in 200 components = 0.0160252 Jy ! Clean residual min=-0.010524 max=0.011344 Jy/beam ! Clean residual mean=0.000118 rms=0.002683 Jy/beam ! Combined flux in latest and established models = 0.230029 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 144 components and 0.230029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177301Jy sigma=0.000813 ! Fit after self-cal, rms=0.178096Jy sigma=0.000806 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.5, -90). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124106 Jy ! Component: 100 - total flux cleaned = 0.0192875 Jy ! Component: 150 - total flux cleaned = 0.0242768 Jy ! Component: 200 - total flux cleaned = 0.0281289 Jy ! Total flux subtracted in 200 components = 0.0281289 Jy ! Clean residual min=-0.009944 max=0.008877 Jy/beam ! Clean residual mean=0.000145 rms=0.002414 Jy/beam ! Combined flux in latest and established models = 0.258158 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 190 components and 0.258158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176807Jy sigma=0.000789 ! Fit after self-cal, rms=0.176339Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176339Jy sigma=0.000781 ! Fit after self-cal, rms=0.168373Jy sigma=0.000777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.313 mas, bmaj=4.925 mas, bpa=-28.53 degrees ! Estimated noise=606.174 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726352 Jy ! Component: 100 - total flux cleaned = 0.0119478 Jy ! Component: 150 - total flux cleaned = 0.0149771 Jy ! Component: 200 - total flux cleaned = 0.0175164 Jy ! Total flux subtracted in 200 components = 0.0175164 Jy ! Clean residual min=-0.007975 max=0.006999 Jy/beam ! Clean residual mean=0.000135 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.275674 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 203 components and 0.275674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167783Jy sigma=0.000769 ! Fit after self-cal, rms=0.167510Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449587 Jy ! Component: 100 - total flux cleaned = 0.00724283 Jy ! Component: 150 - total flux cleaned = 0.0091306 Jy ! Component: 200 - total flux cleaned = 0.0102514 Jy ! Total flux subtracted in 200 components = 0.0102514 Jy ! Clean residual min=-0.007445 max=0.007119 Jy/beam ! Clean residual mean=0.000115 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.285926 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 209 components and 0.285926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167235Jy sigma=0.000763 ! Fit after self-cal, rms=0.167168Jy sigma=0.000762 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167168Jy sigma=0.000762 ! Fit after self-cal, rms=0.161623Jy sigma=0.000759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.823 mas, bmaj=12.44 mas, bpa=-48.11 degrees ! Estimated noise=686.693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578268 Jy ! Component: 100 - total flux cleaned = 0.00839058 Jy ! Component: 150 - total flux cleaned = 0.0103826 Jy ! Component: 200 - total flux cleaned = 0.0111204 Jy ! Total flux subtracted in 200 components = 0.0111204 Jy ! Clean residual min=-0.008690 max=0.008045 Jy/beam ! Clean residual mean=0.000136 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 0.297046 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 225 components and 0.297046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161432Jy sigma=0.000758 ! Fit after self-cal, rms=0.161201Jy sigma=0.000756 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272574 Jy ! Component: 100 - total flux cleaned = 0.00423955 Jy ! Component: 150 - total flux cleaned = 0.00464635 Jy ! Component: 200 - total flux cleaned = 0.00512087 Jy ! Total flux subtracted in 200 components = 0.00512087 Jy ! Clean residual min=-0.008247 max=0.007848 Jy/beam ! Clean residual mean=0.000110 rms=0.002408 Jy/beam ! Combined flux in latest and established models = 0.302167 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 236 components and 0.302167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161140Jy sigma=0.000756 ! Fit after self-cal, rms=0.161127Jy sigma=0.000756 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.376 mas, bmaj=4.963 mas, bpa=-28.76 degrees ! Estimated noise=603.587 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.376 x 4.963 at -28.76 degrees (North through East) ! Clean map min=-0.0062813 max=0.084752 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.35 mas, bmaj=4.057 mas, bpa=-16.95 degrees ! Estimated noise=1040.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0607607 Jy ! Component: 100 - total flux cleaned = 0.0909158 Jy ! Component: 150 - total flux cleaned = 0.113987 Jy ! Component: 200 - total flux cleaned = 0.132893 Jy ! Total flux subtracted in 200 components = 0.132893 Jy ! Clean residual min=-0.013810 max=0.015019 Jy/beam ! Clean residual mean=0.000157 rms=0.003715 Jy/beam ! Combined flux in latest and established models = 0.132893 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 60 model components to the UV plane model. ! The established model now contains 60 components and 0.132893 Jy ! Inverting map and beam ! Estimated beam: bmin=4.376 mas, bmaj=4.963 mas, bpa=-28.76 degrees ! Estimated noise=603.587 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232269 Jy ! Component: 100 - total flux cleaned = 0.0425763 Jy ! Component: 150 - total flux cleaned = 0.0590216 Jy ! Component: 200 - total flux cleaned = 0.0731533 Jy ! Total flux subtracted in 200 components = 0.0731533 Jy ! Clean residual min=-0.010057 max=0.011601 Jy/beam ! Clean residual mean=0.000147 rms=0.003214 Jy/beam ! Combined flux in latest and established models = 0.206046 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 109 components and 0.206046 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.823 mas, bmaj=12.44 mas, bpa=-48.11 degrees ! Estimated noise=686.693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199729 Jy ! Component: 100 - total flux cleaned = 0.0354755 Jy ! Component: 150 - total flux cleaned = 0.0478436 Jy ! Component: 200 - total flux cleaned = 0.0577878 Jy ! Total flux subtracted in 200 components = 0.0577878 Jy ! Clean residual min=-0.009864 max=0.009211 Jy/beam ! Clean residual mean=0.000128 rms=0.003025 Jy/beam ! Combined flux in latest and established models = 0.263834 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00803182 Jy ! Component: 100 - total flux cleaned = 0.0145238 Jy ! Component: 150 - total flux cleaned = 0.0197816 Jy ! Component: 200 - total flux cleaned = 0.024041 Jy ! Total flux subtracted in 200 components = 0.024041 Jy ! Clean residual min=-0.008426 max=0.007943 Jy/beam ! Clean residual mean=0.000056 rms=0.002467 Jy/beam ! Combined flux in latest and established models = 0.287875 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 175 components and 0.287875 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.376 mas, bmaj=4.963 mas, bpa=-28.76 degrees ! Estimated noise=603.587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043166 Jy ! Component: 100 - total flux cleaned = 0.00621834 Jy ! Component: 150 - total flux cleaned = 0.00728434 Jy ! Component: 200 - total flux cleaned = 0.00810445 Jy ! Total flux subtracted in 200 components = 0.00810445 Jy ! Clean residual min=-0.006408 max=0.007297 Jy/beam ! Clean residual mean=0.000055 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.295979 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 190 components and 0.295979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161076Jy sigma=0.000760 ! Fit after self-cal, rms=0.160838Jy sigma=0.000758 wmodel J1725+7726_S_2017_10_21_pus_map.mod ! Writing 190 model components to file: J1725+7726_S_2017_10_21_pus_map.mod wobs J1725+7726_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1725+7726_S_2017_10_21_pus_uvs.fits wwins J1725+7726_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J1725+7726_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280919 Jy ! Component: 100 - total flux cleaned = 0.00391425 Jy ! Component: 150 - total flux cleaned = 0.00526574 Jy ! Component: 200 - total flux cleaned = 0.00605704 Jy ! Component: 250 - total flux cleaned = 0.00596093 Jy ! Component: 300 - total flux cleaned = 0.00624137 Jy ! Component: 350 - total flux cleaned = 0.00624216 Jy ! Component: 400 - total flux cleaned = 0.00659415 Jy ! Component: 450 - total flux cleaned = 0.00650535 Jy ! Component: 500 - total flux cleaned = 0.00667459 Jy ! Component: 550 - total flux cleaned = 0.00708778 Jy ! Component: 600 - total flux cleaned = 0.00733008 Jy ! Component: 650 - total flux cleaned = 0.00764709 Jy ! Component: 700 - total flux cleaned = 0.00780162 Jy ! Component: 750 - total flux cleaned = 0.00795563 Jy ! Component: 800 - total flux cleaned = 0.00848507 Jy ! Component: 850 - total flux cleaned = 0.00893246 Jy ! Component: 900 - total flux cleaned = 0.00937053 Jy ! Component: 950 - total flux cleaned = 0.00973119 Jy ! Component: 1000 - total flux cleaned = 0.010299 Jy ! Component: 1050 - total flux cleaned = 0.0105799 Jy ! Component: 1100 - total flux cleaned = 0.0110625 Jy ! Component: 1150 - total flux cleaned = 0.0115386 Jy ! Component: 1200 - total flux cleaned = 0.011873 Jy ! Component: 1250 - total flux cleaned = 0.0124013 Jy ! Component: 1300 - total flux cleaned = 0.0124653 Jy ! Component: 1350 - total flux cleaned = 0.0127888 Jy ! Component: 1400 - total flux cleaned = 0.0131073 Jy ! Component: 1450 - total flux cleaned = 0.0134205 Jy ! Component: 1500 - total flux cleaned = 0.013482 Jy ! Component: 1550 - total flux cleaned = 0.0137877 Jy ! Component: 1600 - total flux cleaned = 0.0137268 Jy ! Component: 1650 - total flux cleaned = 0.0136676 Jy ! Component: 1700 - total flux cleaned = 0.0139046 Jy ! Component: 1750 - total flux cleaned = 0.0137297 Jy ! Component: 1800 - total flux cleaned = 0.0139039 Jy ! Component: 1850 - total flux cleaned = 0.0141897 Jy ! Component: 1900 - total flux cleaned = 0.0142452 Jy ! Component: 1950 - total flux cleaned = 0.0145248 Jy ! Component: 2000 - total flux cleaned = 0.0146906 Jy ! Component: 2050 - total flux cleaned = 0.0147451 Jy ! Component: 2100 - total flux cleaned = 0.0150706 Jy ! Component: 2150 - total flux cleaned = 0.0151777 Jy ! Component: 2200 - total flux cleaned = 0.0152841 Jy ! Component: 2250 - total flux cleaned = 0.0154428 Jy ! Component: 2300 - total flux cleaned = 0.0156509 Jy ! Component: 2350 - total flux cleaned = 0.0158573 Jy ! Component: 2400 - total flux cleaned = 0.0161127 Jy ! Component: 2450 - total flux cleaned = 0.0162141 Jy ! Component: 2500 - total flux cleaned = 0.0165142 Jy ! Component: 2550 - total flux cleaned = 0.0167626 Jy ! Component: 2600 - total flux cleaned = 0.0168116 Jy ! Component: 2650 - total flux cleaned = 0.0172024 Jy ! Component: 2700 - total flux cleaned = 0.0174925 Jy ! Component: 2750 - total flux cleaned = 0.0176844 Jy ! Component: 2800 - total flux cleaned = 0.0180652 Jy ! Component: 2850 - total flux cleaned = 0.0182541 Jy ! Component: 2900 - total flux cleaned = 0.0185353 Jy ! Component: 2950 - total flux cleaned = 0.0186281 Jy ! Component: 3000 - total flux cleaned = 0.0186744 Jy ! Component: 3050 - total flux cleaned = 0.0187206 Jy ! Component: 3100 - total flux cleaned = 0.018993 Jy ! Component: 3150 - total flux cleaned = 0.0189934 Jy ! Component: 3200 - total flux cleaned = 0.0191281 Jy ! Component: 3250 - total flux cleaned = 0.0192165 Jy ! Component: 3300 - total flux cleaned = 0.0189517 Jy ! Component: 3350 - total flux cleaned = 0.0192154 Jy ! Component: 3400 - total flux cleaned = 0.0191283 Jy ! Component: 3450 - total flux cleaned = 0.019171 Jy ! Component: 3500 - total flux cleaned = 0.0191283 Jy ! Component: 3550 - total flux cleaned = 0.0190856 Jy ! Component: 3600 - total flux cleaned = 0.0192553 Jy ! Component: 3650 - total flux cleaned = 0.0191711 Jy ! Component: 3700 - total flux cleaned = 0.0191294 Jy ! Component: 3750 - total flux cleaned = 0.0190464 Jy ! Component: 3800 - total flux cleaned = 0.0191699 Jy ! Component: 3850 - total flux cleaned = 0.0191284 Jy ! Component: 3900 - total flux cleaned = 0.0189242 Jy ! Component: 3950 - total flux cleaned = 0.0189239 Jy ! Component: 4000 - total flux cleaned = 0.0189649 Jy ! Component: 4050 - total flux cleaned = 0.0189247 Jy ! Total flux subtracted in 4096 components = 0.0189646 Jy ! Clean residual min=-0.002397 max=0.002150 Jy/beam ! Clean residual mean=0.000019 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.314944 Jy keep ! Adding 363 model components to the UV plane model. ! The established model now contains 553 components and 0.314944 Jy ![Exited script file: muppet] wmap "J1725+7726_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.376 x 4.963 at -28.76 degrees (North through East) ! Clean map min=-0.005285 max=0.087782 Jy/beam ! Writing clean map to FITS file: J1725+7726_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0877823 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000788543 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.69488 2.69488 5.38976 10.7795 21.559 43.1181 86.2362 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.376 x 4.963 at -28.76 degrees (North through East) ! Clean map min=-0.005285 max=0.087782 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1725+7726_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:03:10 2019