! Started logfile: J1725+1152_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:45:51 2019 obs J1725+1152_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1725+1152_S_2017_03_27_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.968142 visibilities/baseline/integration-bin. ! Found source: J1725+1152 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 19692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1725+1152_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 394 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.944993Jy sigma=0.008141 ! Fit after self-cal, rms=0.933271Jy sigma=0.008061 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=6.868 mas, bpa=-4.313 degrees ! Estimated noise=1006.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539419 Jy ! Component: 100 - total flux cleaned = 0.0658052 Jy ! Total flux subtracted in 100 components = 0.0658052 Jy ! Clean residual min=-0.003271 max=0.003865 Jy/beam ! Clean residual mean=0.000000 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.0658051 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0658051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088607Jy sigma=0.000674 ! Fit after self-cal, rms=0.088528Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=7.61 mas, bpa=-3.969 degrees ! Estimated noise=645.435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052649 Jy ! Component: 100 - total flux cleaned = 0.00809004 Jy ! Component: 150 - total flux cleaned = 0.00975544 Jy ! Component: 200 - total flux cleaned = 0.0107731 Jy ! Total flux subtracted in 200 components = 0.0107731 Jy ! Clean residual min=-0.002143 max=0.002287 Jy/beam ! Clean residual mean=-0.000003 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0765782 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 40 components and 0.0765782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088172Jy sigma=0.000671 ! Fit after self-cal, rms=0.088193Jy sigma=0.000671 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.62 FD 1.00 HN 0.96 KP 1.06 ! LA 0.96 MK 0.97 NL 0.95 OV 1.01 ! PT 1.05 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.00 KP 0.98 ! LA 0.93 MK 1.15 NL 0.99 OV 1.12 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00 HN 1.02 KP 0.97 ! LA 0.99 MK 1.02 NL 0.96 OV 0.98 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.10 HN 0.95 KP 1.00* ! LA 0.91 MK 1.15 NL 1.00* OV 0.88 ! PT 0.87 SC 1.00* ! ! ! Fit before self-cal, rms=0.088193Jy sigma=0.000671 ! Fit after self-cal, rms=0.087859Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.344 mas, bmaj=7.683 mas, bpa=-3.62 degrees ! Estimated noise=646.373 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.46178e-05 Jy ! Component: 100 - total flux cleaned = 0.00016367 Jy ! Component: 150 - total flux cleaned = 0.000203439 Jy ! Component: 200 - total flux cleaned = 0.0001862 Jy ! Total flux subtracted in 200 components = 0.0001862 Jy ! Clean residual min=-0.001787 max=0.001954 Jy/beam ! Clean residual mean=-0.000005 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0767644 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.0767644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087845Jy sigma=0.000667 ! Fit after self-cal, rms=0.087904Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087904Jy sigma=0.000666 ! Fit after self-cal, rms=0.090341Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.353 mas, bmaj=7.65 mas, bpa=-3.888 degrees ! Estimated noise=648.527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210195 Jy ! Component: 100 - total flux cleaned = 0.000132859 Jy ! Component: 150 - total flux cleaned = 8.40267e-05 Jy ! Component: 200 - total flux cleaned = 2.86197e-05 Jy ! Total flux subtracted in 200 components = 2.86197e-05 Jy ! Clean residual min=-0.001610 max=0.001692 Jy/beam ! Clean residual mean=-0.000004 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.076793 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 57 components and 0.076793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090328Jy sigma=0.000663 ! Fit after self-cal, rms=0.090453Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126687 Jy ! Component: 100 - total flux cleaned = -0.000153421 Jy ! Component: 150 - total flux cleaned = -0.000188901 Jy ! Component: 200 - total flux cleaned = -0.000209477 Jy ! Total flux subtracted in 200 components = -0.000209477 Jy ! Clean residual min=-0.001576 max=0.001675 Jy/beam ! Clean residual mean=-0.000004 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0765836 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.0765836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090447Jy sigma=0.000662 ! Fit after self-cal, rms=0.090446Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090446Jy sigma=0.000662 ! Fit after self-cal, rms=0.091896Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.357 mas, bmaj=7.629 mas, bpa=-3.841 degrees ! Estimated noise=647.618 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125511 Jy ! Component: 100 - total flux cleaned = -0.00018475 Jy ! Component: 150 - total flux cleaned = -0.000221149 Jy ! Component: 200 - total flux cleaned = -0.000252167 Jy ! Total flux subtracted in 200 components = -0.000252167 Jy ! Clean residual min=-0.001675 max=0.001657 Jy/beam ! Clean residual mean=-0.000004 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0763314 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 64 components and 0.0763314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091889Jy sigma=0.000662 ! Fit after self-cal, rms=0.091957Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.56848e-05 Jy ! Component: 100 - total flux cleaned = -4.5659e-05 Jy ! Component: 150 - total flux cleaned = -4.60297e-05 Jy ! Component: 200 - total flux cleaned = -5.43768e-05 Jy ! Total flux subtracted in 200 components = -5.43768e-05 Jy ! Clean residual min=-0.001669 max=0.001659 Jy/beam ! Clean residual mean=-0.000004 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.076277 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.076277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091954Jy sigma=0.000662 ! Fit after self-cal, rms=0.091954Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091954Jy sigma=0.000662 ! Fit after self-cal, rms=0.092431Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.691 mas, bmaj=11.24 mas, bpa=1.501 degrees ! Estimated noise=784.071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.59471e-05 Jy ! Component: 100 - total flux cleaned = -0.00016505 Jy ! Component: 150 - total flux cleaned = -0.000230471 Jy ! Component: 200 - total flux cleaned = -0.000269886 Jy ! Total flux subtracted in 200 components = -0.000269886 Jy ! Clean residual min=-0.002239 max=0.001773 Jy/beam ! Clean residual mean=-0.000009 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0760071 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 68 components and 0.0760071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092431Jy sigma=0.000662 ! Fit after self-cal, rms=0.092458Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.87626e-05 Jy ! Component: 100 - total flux cleaned = -8.81047e-05 Jy ! Component: 150 - total flux cleaned = -0.00013239 Jy ! Component: 200 - total flux cleaned = -0.000152454 Jy ! Total flux subtracted in 200 components = -0.000152454 Jy ! Clean residual min=-0.002249 max=0.001788 Jy/beam ! Clean residual mean=-0.000009 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.0758547 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.0758547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092460Jy sigma=0.000662 ! Fit after self-cal, rms=0.092458Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=7.619 mas, bpa=-3.756 degrees ! Estimated noise=647.047 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.36 x 7.619 at -3.756 degrees (North through East) ! Clean map min=-0.0016267 max=0.070016 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=6.852 mas, bpa=-4.395 degrees ! Estimated noise=1011.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0539269 Jy ! Component: 100 - total flux cleaned = 0.0659539 Jy ! Component: 150 - total flux cleaned = 0.0704711 Jy ! Component: 200 - total flux cleaned = 0.0729569 Jy ! Total flux subtracted in 200 components = 0.0729569 Jy ! Clean residual min=-0.002464 max=0.002737 Jy/beam ! Clean residual mean=-0.000002 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0729569 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0729569 Jy ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=7.619 mas, bpa=-3.756 degrees ! Estimated noise=647.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018779 Jy ! Component: 100 - total flux cleaned = 0.0023392 Jy ! Component: 150 - total flux cleaned = 0.00260971 Jy ! Component: 200 - total flux cleaned = 0.00269979 Jy ! Total flux subtracted in 200 components = 0.00269979 Jy ! Clean residual min=-0.001741 max=0.001737 Jy/beam ! Clean residual mean=-0.000004 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0756567 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.0756567 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.691 mas, bmaj=11.24 mas, bpa=1.501 degrees ! Estimated noise=784.071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000348379 Jy ! Component: 100 - total flux cleaned = 0.000233201 Jy ! Component: 150 - total flux cleaned = 0.000179565 Jy ! Component: 200 - total flux cleaned = 0.000164906 Jy ! Total flux subtracted in 200 components = 0.000164906 Jy ! Clean residual min=-0.002253 max=0.001813 Jy/beam ! Clean residual mean=-0.000009 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0758216 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18443e-05 Jy ! Component: 100 - total flux cleaned = -3.04164e-05 Jy ! Component: 150 - total flux cleaned = -3.82303e-05 Jy ! Component: 200 - total flux cleaned = -4.5246e-05 Jy ! Total flux subtracted in 200 components = -4.5246e-05 Jy ! Clean residual min=-0.002257 max=0.001790 Jy/beam ! Clean residual mean=-0.000009 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.0757763 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.0757763 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.36 mas, bmaj=7.619 mas, bpa=-3.756 degrees ! Estimated noise=647.047 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121436 Jy ! Component: 100 - total flux cleaned = -0.000103391 Jy ! Component: 150 - total flux cleaned = -7.01048e-05 Jy ! Component: 200 - total flux cleaned = -4.18517e-05 Jy ! Total flux subtracted in 200 components = -4.18517e-05 Jy ! Clean residual min=-0.001701 max=0.001709 Jy/beam ! Clean residual mean=-0.000004 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0757345 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.0757345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092464Jy sigma=0.000662 ! Fit after self-cal, rms=0.092469Jy sigma=0.000662 wmodel J1725+1152_S_2017_03_27_pus_map.mod ! Writing 73 model components to file: J1725+1152_S_2017_03_27_pus_map.mod wobs J1725+1152_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1725+1152_S_2017_03_27_pus_uvs.fits wwins J1725+1152_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J1725+1152_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000369882 Jy ! Component: 100 - total flux cleaned = 0.000685742 Jy ! Component: 150 - total flux cleaned = 0.000905249 Jy ! Component: 200 - total flux cleaned = 0.0010111 Jy ! Component: 250 - total flux cleaned = 0.00108852 Jy ! Component: 300 - total flux cleaned = 0.00121449 Jy ! Component: 350 - total flux cleaned = 0.00131284 Jy ! Component: 400 - total flux cleaned = 0.00140944 Jy ! Component: 450 - total flux cleaned = 0.00157398 Jy ! Component: 500 - total flux cleaned = 0.00168916 Jy ! Component: 550 - total flux cleaned = 0.00180199 Jy ! Component: 600 - total flux cleaned = 0.00193489 Jy ! Component: 650 - total flux cleaned = 0.0020653 Jy ! Component: 700 - total flux cleaned = 0.0021929 Jy ! Component: 750 - total flux cleaned = 0.0023187 Jy ! Component: 800 - total flux cleaned = 0.00242241 Jy ! Component: 850 - total flux cleaned = 0.00248358 Jy ! Component: 900 - total flux cleaned = 0.00256445 Jy ! Component: 950 - total flux cleaned = 0.00268403 Jy ! Component: 1000 - total flux cleaned = 0.0027629 Jy ! Component: 1050 - total flux cleaned = 0.00282181 Jy ! Component: 1100 - total flux cleaned = 0.00289949 Jy ! Component: 1150 - total flux cleaned = 0.00305209 Jy ! Component: 1200 - total flux cleaned = 0.00310856 Jy ! Component: 1250 - total flux cleaned = 0.0032949 Jy ! Component: 1300 - total flux cleaned = 0.00336829 Jy ! Component: 1350 - total flux cleaned = 0.00344108 Jy ! Component: 1400 - total flux cleaned = 0.00354923 Jy ! Component: 1450 - total flux cleaned = 0.00362071 Jy ! Component: 1500 - total flux cleaned = 0.00370932 Jy ! Component: 1550 - total flux cleaned = 0.00379697 Jy ! Component: 1600 - total flux cleaned = 0.00391839 Jy ! Component: 1650 - total flux cleaned = 0.0039529 Jy ! Component: 1700 - total flux cleaned = 0.00402108 Jy ! Component: 1750 - total flux cleaned = 0.0040382 Jy ! Component: 1800 - total flux cleaned = 0.00413881 Jy ! Component: 1850 - total flux cleaned = 0.0041888 Jy ! Component: 1900 - total flux cleaned = 0.00425455 Jy ! Component: 1950 - total flux cleaned = 0.00430334 Jy ! Component: 2000 - total flux cleaned = 0.00436805 Jy ! Component: 2050 - total flux cleaned = 0.00440003 Jy ! Component: 2100 - total flux cleaned = 0.00446365 Jy ! Component: 2150 - total flux cleaned = 0.00451095 Jy ! Component: 2200 - total flux cleaned = 0.00460488 Jy ! Component: 2250 - total flux cleaned = 0.00465112 Jy ! Component: 2300 - total flux cleaned = 0.00468188 Jy ! Component: 2350 - total flux cleaned = 0.00469715 Jy ! Component: 2400 - total flux cleaned = 0.0047577 Jy ! Component: 2450 - total flux cleaned = 0.00478796 Jy ! Component: 2500 - total flux cleaned = 0.00486288 Jy ! Component: 2550 - total flux cleaned = 0.00493668 Jy ! Component: 2600 - total flux cleaned = 0.00493663 Jy ! Component: 2650 - total flux cleaned = 0.00499505 Jy ! Component: 2700 - total flux cleaned = 0.00500956 Jy ! Component: 2750 - total flux cleaned = 0.00502417 Jy ! Component: 2800 - total flux cleaned = 0.0050815 Jy ! Component: 2850 - total flux cleaned = 0.00515257 Jy ! Component: 2900 - total flux cleaned = 0.00518064 Jy ! Component: 2950 - total flux cleaned = 0.00520863 Jy ! Component: 3000 - total flux cleaned = 0.00520856 Jy ! Component: 3050 - total flux cleaned = 0.005264 Jy ! Component: 3100 - total flux cleaned = 0.00529151 Jy ! Component: 3150 - total flux cleaned = 0.00535985 Jy ! Component: 3200 - total flux cleaned = 0.00534626 Jy ! Component: 3250 - total flux cleaned = 0.00534627 Jy ! Component: 3300 - total flux cleaned = 0.00535977 Jy ! Component: 3350 - total flux cleaned = 0.0055197 Jy ! Component: 3400 - total flux cleaned = 0.00549324 Jy ! Component: 3450 - total flux cleaned = 0.00551955 Jy ! Component: 3500 - total flux cleaned = 0.00559823 Jy ! Component: 3550 - total flux cleaned = 0.00567637 Jy ! Component: 3600 - total flux cleaned = 0.00565051 Jy ! Component: 3650 - total flux cleaned = 0.00574056 Jy ! Component: 3700 - total flux cleaned = 0.00574057 Jy ! Component: 3750 - total flux cleaned = 0.00582953 Jy ! Component: 3800 - total flux cleaned = 0.00579163 Jy ! Component: 3850 - total flux cleaned = 0.00586707 Jy ! Component: 3900 - total flux cleaned = 0.00590458 Jy ! Component: 3950 - total flux cleaned = 0.00590447 Jy ! Component: 4000 - total flux cleaned = 0.00597879 Jy ! Component: 4050 - total flux cleaned = 0.00599105 Jy ! Total flux subtracted in 4096 components = 0.00600329 Jy ! Clean residual min=-0.000797 max=0.000647 Jy/beam ! Clean residual mean=-0.000002 rms=0.000230 Jy/beam ! Combined flux in latest and established models = 0.0817378 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 355 components and 0.0817378 Jy ![Exited script file: muppet] wmap "J1725+1152_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.36 x 7.619 at -3.756 degrees (North through East) ! Clean map min=-0.0013305 max=0.069733 Jy/beam ! Writing clean map to FITS file: J1725+1152_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0697331 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229131 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.985749 0.985749 1.9715 3.943 7.88599 15.772 31.544 63.0879 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.36 x 7.619 at -3.756 degrees (North through East) ! Clean map min=-0.0013305 max=0.069733 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1725+1152_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:45:56 2019