! Started logfile: J1724+4004_S_2017_05_01_pus_uvs.log on Wed May 1 18:41:13 2019 obs J1724+4004_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1724+4004_S_2017_05_01_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.841888 visibilities/baseline/integration-bin. ! Found source: J1724+4004 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 17124 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1724+4004_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 93 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 545 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.718280Jy sigma=0.036884 ! Fit after self-cal, rms=0.709953Jy sigma=0.036740 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=5.814 mas, bpa=-10.34 degrees ! Estimated noise=854.037 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158666 Jy ! Component: 100 - total flux cleaned = 0.204172 Jy ! Total flux subtracted in 100 components = 0.204172 Jy ! Clean residual min=-0.056597 max=0.057021 Jy/beam ! Clean residual mean=-0.000053 rms=0.018851 Jy/beam ! Combined flux in latest and established models = 0.204172 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.204172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157177Jy sigma=0.006958 ! Fit after self-cal, rms=0.156994Jy sigma=0.006957 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=6.803 mas, bpa=-10.54 degrees ! Estimated noise=463.155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209258 Jy ! Component: 100 - total flux cleaned = 0.0236165 Jy ! Component: 150 - total flux cleaned = 0.0239411 Jy ! Component: 200 - total flux cleaned = 0.0239448 Jy ! Total flux subtracted in 200 components = 0.0239448 Jy ! Clean residual min=-0.065844 max=0.065238 Jy/beam ! Clean residual mean=-0.000274 rms=0.020883 Jy/beam ! Combined flux in latest and established models = 0.228117 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.228117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142284Jy sigma=0.007644 ! Fit after self-cal, rms=0.142240Jy sigma=0.007644 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.74 HN 0.94 KP 0.78 ! LA 0.75 MK 0.93 NL 0.78 OV 0.87 ! PT 0.77 SC 0.86 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.76 HN 0.95 KP 0.75 ! LA 0.73 MK 0.93 NL 0.82 OV 0.93 ! PT 0.75 SC 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.80 HN 0.93 KP 0.76 ! LA 0.76 MK 0.95 NL 0.82 OV 0.82 ! PT 0.75 SC 0.89 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.81 HN 0.93 KP 1.00* ! LA 38.84 MK 1.16 NL 1.00* OV 1.00* ! PT 0.79 SC 1.00* ! ! ! Fit before self-cal, rms=0.142240Jy sigma=0.007644 ! Fit after self-cal, rms=2.000221Jy sigma=0.000831 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.95 mas, bmaj=6.312 mas, bpa=-7.567 degrees ! Estimated noise=464.205 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013885 Jy ! Component: 100 - total flux cleaned = 0.0205448 Jy ! Component: 150 - total flux cleaned = 0.0236107 Jy ! Component: 200 - total flux cleaned = 0.025248 Jy ! Total flux subtracted in 200 components = 0.025248 Jy ! Clean residual min=-0.004887 max=0.006315 Jy/beam ! Clean residual mean=0.000023 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.253365 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 42 components and 0.253365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.999048Jy sigma=0.000798 ! Fit after self-cal, rms=1.999299Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.999299Jy sigma=0.000785 ! Fit after self-cal, rms=1.416558Jy sigma=0.000723 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=6.319 mas, bpa=-8.394 degrees ! Estimated noise=462.822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543835 Jy ! Component: 100 - total flux cleaned = 0.00809774 Jy ! Component: 150 - total flux cleaned = 0.00897603 Jy ! Component: 200 - total flux cleaned = 0.00939812 Jy ! Total flux subtracted in 200 components = 0.00939812 Jy ! Clean residual min=-0.003937 max=0.004475 Jy/beam ! Clean residual mean=0.000053 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.262763 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.262763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.416188Jy sigma=0.000718 ! Fit after self-cal, rms=1.416180Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-24.5, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393373 Jy ! Component: 100 - total flux cleaned = 0.00632857 Jy ! Component: 150 - total flux cleaned = 0.0074338 Jy ! Component: 200 - total flux cleaned = 0.00817323 Jy ! Total flux subtracted in 200 components = 0.00817323 Jy ! Clean residual min=-0.003542 max=0.003537 Jy/beam ! Clean residual mean=0.000052 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.270937 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 86 components and 0.270937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.415994Jy sigma=0.000713 ! Fit after self-cal, rms=1.415995Jy sigma=0.000713 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.415995Jy sigma=0.000713 ! Fit after self-cal, rms=0.056932Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.891 mas, bmaj=6.315 mas, bpa=-8.373 degrees ! Estimated noise=461.388 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00213901 Jy ! Component: 100 - total flux cleaned = 0.00309109 Jy ! Component: 150 - total flux cleaned = 0.0036378 Jy ! Component: 200 - total flux cleaned = 0.00414393 Jy ! Total flux subtracted in 200 components = 0.00414393 Jy ! Clean residual min=-0.001820 max=0.003234 Jy/beam ! Clean residual mean=0.000003 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.275081 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 104 components and 0.275081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056771Jy sigma=0.000666 ! Fit after self-cal, rms=0.056669Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.5, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265105 Jy ! Component: 100 - total flux cleaned = 0.00357133 Jy ! Component: 150 - total flux cleaned = 0.003527 Jy ! Component: 200 - total flux cleaned = 0.00352869 Jy ! Total flux subtracted in 200 components = 0.00352869 Jy ! Clean residual min=-0.001643 max=0.002374 Jy/beam ! Clean residual mean=0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.278609 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 130 components and 0.278609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056514Jy sigma=0.000664 ! Fit after self-cal, rms=0.056501Jy sigma=0.000663 ! Inverting map ! Added new window around map position (-29.5, 39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228433 Jy ! Component: 100 - total flux cleaned = 0.00311069 Jy ! Component: 150 - total flux cleaned = 0.00327769 Jy ! Component: 200 - total flux cleaned = 0.0033142 Jy ! Total flux subtracted in 200 components = 0.0033142 Jy ! Clean residual min=-0.001459 max=0.001735 Jy/beam ! Clean residual mean=0.000005 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.281923 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 166 components and 0.281923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056392Jy sigma=0.000662 ! Fit after self-cal, rms=0.056385Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056385Jy sigma=0.000662 ! Fit after self-cal, rms=0.056160Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.475 mas, bmaj=9.997 mas, bpa=-0.1294 degrees ! Estimated noise=528.539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177468 Jy ! Component: 100 - total flux cleaned = 0.00266333 Jy ! Component: 150 - total flux cleaned = 0.00318762 Jy ! Component: 200 - total flux cleaned = 0.00353126 Jy ! Total flux subtracted in 200 components = 0.00353126 Jy ! Clean residual min=-0.001336 max=0.001741 Jy/beam ! Clean residual mean=0.000005 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.285455 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 197 components and 0.285455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056118Jy sigma=0.000660 ! Fit after self-cal, rms=0.056104Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000144074 Jy ! Component: 100 - total flux cleaned = 0.000433136 Jy ! Component: 150 - total flux cleaned = 0.00061043 Jy ! Component: 200 - total flux cleaned = 0.000678764 Jy ! Total flux subtracted in 200 components = 0.000678764 Jy ! Clean residual min=-0.001328 max=0.001661 Jy/beam ! Clean residual mean=0.000005 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.286133 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 225 components and 0.286133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056090Jy sigma=0.000660 ! Fit after self-cal, rms=0.056079Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.891 mas, bmaj=6.314 mas, bpa=-8.255 degrees ! Estimated noise=460.425 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.891 x 6.314 at -8.255 degrees (North through East) ! Clean map min=-0.0012585 max=0.20189 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.167 mas, bmaj=5.432 mas, bpa=-9.536 degrees ! Estimated noise=840.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.155879 Jy ! Component: 100 - total flux cleaned = 0.200034 Jy ! Component: 150 - total flux cleaned = 0.221999 Jy ! Component: 200 - total flux cleaned = 0.235401 Jy ! Total flux subtracted in 200 components = 0.235401 Jy ! Clean residual min=-0.003887 max=0.007039 Jy/beam ! Clean residual mean=0.000006 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.235401 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.235401 Jy ! Inverting map and beam ! Estimated beam: bmin=3.891 mas, bmaj=6.314 mas, bpa=-8.255 degrees ! Estimated noise=460.425 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111544 Jy ! Component: 100 - total flux cleaned = 0.0187079 Jy ! Component: 150 - total flux cleaned = 0.0243736 Jy ! Component: 200 - total flux cleaned = 0.028787 Jy ! Total flux subtracted in 200 components = 0.028787 Jy ! Clean residual min=-0.002141 max=0.002646 Jy/beam ! Clean residual mean=0.000005 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.264188 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 64 components and 0.264188 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362986 Jy ! Component: 100 - total flux cleaned = 0.0066619 Jy ! Component: 150 - total flux cleaned = 0.00921847 Jy ! Component: 200 - total flux cleaned = 0.0113871 Jy ! Total flux subtracted in 200 components = 0.0113871 Jy ! Clean residual min=-0.001560 max=0.001777 Jy/beam ! Clean residual mean=0.000004 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.275575 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 97 components and 0.275575 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.475 mas, bmaj=9.997 mas, bpa=-0.1294 degrees ! Estimated noise=528.539 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261189 Jy ! Component: 100 - total flux cleaned = 0.0045372 Jy ! Component: 150 - total flux cleaned = 0.00604333 Jy ! Component: 200 - total flux cleaned = 0.00725057 Jy ! Total flux subtracted in 200 components = 0.00725057 Jy ! Clean residual min=-0.001465 max=0.001727 Jy/beam ! Clean residual mean=0.000006 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.282826 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801894 Jy ! Component: 100 - total flux cleaned = 0.00132055 Jy ! Component: 150 - total flux cleaned = 0.00174811 Jy ! Component: 200 - total flux cleaned = 0.00204783 Jy ! Total flux subtracted in 200 components = 0.00204783 Jy ! Clean residual min=-0.001433 max=0.001648 Jy/beam ! Clean residual mean=0.000006 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.284873 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 198 components and 0.284873 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.891 mas, bmaj=6.314 mas, bpa=-8.255 degrees ! Estimated noise=460.425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449269 Jy ! Component: 100 - total flux cleaned = 0.000829313 Jy ! Component: 150 - total flux cleaned = 0.00106968 Jy ! Component: 200 - total flux cleaned = 0.00122956 Jy ! Total flux subtracted in 200 components = 0.00122956 Jy ! Clean residual min=-0.001361 max=0.001375 Jy/beam ! Clean residual mean=0.000003 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.286103 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 227 components and 0.286103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056100Jy sigma=0.000660 ! Fit after self-cal, rms=0.056078Jy sigma=0.000660 wmodel J1724+4004_S_2017_05_01_pus_map.mod ! Writing 227 model components to file: J1724+4004_S_2017_05_01_pus_map.mod wobs J1724+4004_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1724+4004_S_2017_05_01_pus_uvs.fits wwins J1724+4004_S_2017_05_01_pus_map.win ! wwins: Wrote 5 windows to J1724+4004_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256788 Jy ! Component: 100 - total flux cleaned = 0.000506379 Jy ! Component: 150 - total flux cleaned = 0.000721585 Jy ! Component: 200 - total flux cleaned = 0.0008459 Jy ! Component: 250 - total flux cleaned = 0.000905757 Jy ! Component: 300 - total flux cleaned = 0.000944503 Jy ! Component: 350 - total flux cleaned = 0.00102037 Jy ! Component: 400 - total flux cleaned = 0.00107613 Jy ! Component: 450 - total flux cleaned = 0.00116737 Jy ! Component: 500 - total flux cleaned = 0.00118526 Jy ! Component: 550 - total flux cleaned = 0.00123834 Jy ! Component: 600 - total flux cleaned = 0.00127318 Jy ! Component: 650 - total flux cleaned = 0.00135837 Jy ! Component: 700 - total flux cleaned = 0.00139166 Jy ! Component: 750 - total flux cleaned = 0.00147365 Jy ! Component: 800 - total flux cleaned = 0.00153802 Jy ! Component: 850 - total flux cleaned = 0.00161738 Jy ! Component: 900 - total flux cleaned = 0.00161781 Jy ! Component: 950 - total flux cleaned = 0.00172593 Jy ! Component: 1000 - total flux cleaned = 0.00171085 Jy ! Component: 1050 - total flux cleaned = 0.00180115 Jy ! Component: 1100 - total flux cleaned = 0.00177161 Jy ! Component: 1150 - total flux cleaned = 0.00178641 Jy ! Component: 1200 - total flux cleaned = 0.00177203 Jy ! Component: 1250 - total flux cleaned = 0.00177211 Jy ! Component: 1300 - total flux cleaned = 0.00178618 Jy ! Component: 1350 - total flux cleaned = 0.00175809 Jy ! Component: 1400 - total flux cleaned = 0.00174429 Jy ! Component: 1450 - total flux cleaned = 0.00173092 Jy ! Component: 1500 - total flux cleaned = 0.00171716 Jy ! Component: 1550 - total flux cleaned = 0.00171727 Jy ! Component: 1600 - total flux cleaned = 0.00175684 Jy ! Component: 1650 - total flux cleaned = 0.00174386 Jy ! Component: 1700 - total flux cleaned = 0.00179577 Jy ! Component: 1750 - total flux cleaned = 0.00180862 Jy ! Component: 1800 - total flux cleaned = 0.00183408 Jy ! Component: 1850 - total flux cleaned = 0.0018216 Jy ! Component: 1900 - total flux cleaned = 0.00185888 Jy ! Component: 1950 - total flux cleaned = 0.00192029 Jy ! Component: 2000 - total flux cleaned = 0.00192029 Jy ! Component: 2050 - total flux cleaned = 0.00194463 Jy ! Component: 2100 - total flux cleaned = 0.00198049 Jy ! Component: 2150 - total flux cleaned = 0.00200414 Jy ! Component: 2200 - total flux cleaned = 0.00200424 Jy ! Component: 2250 - total flux cleaned = 0.00205075 Jy ! Component: 2300 - total flux cleaned = 0.00200444 Jy ! Component: 2350 - total flux cleaned = 0.00202743 Jy ! Component: 2400 - total flux cleaned = 0.00203868 Jy ! Component: 2450 - total flux cleaned = 0.002061 Jy ! Component: 2500 - total flux cleaned = 0.00207209 Jy ! Component: 2550 - total flux cleaned = 0.00210518 Jy ! Component: 2600 - total flux cleaned = 0.00205034 Jy ! Component: 2650 - total flux cleaned = 0.0020612 Jy ! Component: 2700 - total flux cleaned = 0.00213679 Jy ! Component: 2750 - total flux cleaned = 0.0021477 Jy ! Component: 2800 - total flux cleaned = 0.00216883 Jy ! Component: 2850 - total flux cleaned = 0.00223201 Jy ! Component: 2900 - total flux cleaned = 0.00224261 Jy ! Component: 2950 - total flux cleaned = 0.00229432 Jy ! Component: 3000 - total flux cleaned = 0.00233524 Jy ! Component: 3050 - total flux cleaned = 0.00236585 Jy ! Component: 3100 - total flux cleaned = 0.00242652 Jy ! Component: 3150 - total flux cleaned = 0.00244644 Jy ! Component: 3200 - total flux cleaned = 0.00250603 Jy ! Component: 3250 - total flux cleaned = 0.00252578 Jy ! Component: 3300 - total flux cleaned = 0.00255511 Jy ! Component: 3350 - total flux cleaned = 0.00262305 Jy ! Component: 3400 - total flux cleaned = 0.00267122 Jy ! Component: 3450 - total flux cleaned = 0.00270007 Jy ! Component: 3500 - total flux cleaned = 0.0027666 Jy ! Component: 3550 - total flux cleaned = 0.00275718 Jy ! Component: 3600 - total flux cleaned = 0.00280412 Jy ! Component: 3650 - total flux cleaned = 0.00282273 Jy ! Component: 3700 - total flux cleaned = 0.00284129 Jy ! Component: 3750 - total flux cleaned = 0.00287805 Jy ! Component: 3800 - total flux cleaned = 0.00290543 Jy ! Component: 3850 - total flux cleaned = 0.00288746 Jy ! Component: 3900 - total flux cleaned = 0.00292338 Jy ! Component: 3950 - total flux cleaned = 0.00292345 Jy ! Component: 4000 - total flux cleaned = 0.00296783 Jy ! Component: 4050 - total flux cleaned = 0.00298536 Jy ! Total flux subtracted in 4096 components = 0.00298538 Jy ! Clean residual min=-0.000548 max=0.000560 Jy/beam ! Clean residual mean=0.000003 rms=0.000162 Jy/beam ! Combined flux in latest and established models = 0.289088 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 542 components and 0.289088 Jy ![Exited script file: muppet] wmap "J1724+4004_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.891 x 6.314 at -8.255 degrees (North through East) ! Clean map min=-0.0010151 max=0.20208 Jy/beam ! Writing clean map to FITS file: J1724+4004_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.202085 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000160894 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.238851 0.238851 0.477701 0.955403 1.91081 3.82161 7.64322 15.2864 30.5729 61.1458 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.202 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.891 x 6.314 at -8.255 degrees (North through East) ! Clean map min=-0.0010151 max=0.20208 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1724+4004_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:41:18 2019