! Started logfile: J1724+0224_S_2017_10_09_pus_uvs.log on Sun May 12 13:16:43 2019 obs J1724+0224_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1724+0224_S_2017_10_09_pus_uva.fits ! AN table 1: 86 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.751938 visibilities/baseline/integration-bin. ! Found source: J1724+0224 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 9312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1724+0224_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 263 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 474 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006566Jy sigma=0.008611 ! Fit after self-cal, rms=0.958075Jy sigma=0.008222 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=13.52 mas, bpa=-18.93 degrees ! Estimated noise=1471.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343684 Jy ! Component: 100 - total flux cleaned = 0.0421645 Jy ! Total flux subtracted in 100 components = 0.0421645 Jy ! Clean residual min=-0.003950 max=0.003950 Jy/beam ! Clean residual mean=0.000002 rms=0.001082 Jy/beam ! Combined flux in latest and established models = 0.0421645 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0421645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084167Jy sigma=0.000638 ! Fit after self-cal, rms=0.082229Jy sigma=0.000623 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.24 mas, bmaj=15.19 mas, bpa=-18.83 degrees ! Estimated noise=1056.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444189 Jy ! Component: 100 - total flux cleaned = 0.00454642 Jy ! Component: 150 - total flux cleaned = 0.00454688 Jy ! Component: 200 - total flux cleaned = 0.00436707 Jy ! Total flux subtracted in 200 components = 0.00436707 Jy ! Clean residual min=-0.002459 max=0.002616 Jy/beam ! Clean residual mean=0.000002 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.0465316 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 34 components and 0.0465316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081761Jy sigma=0.000620 ! Fit after self-cal, rms=0.081646Jy sigma=0.000620 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 HN 1.07 KP 1.04 ! LA 1.07 MK 1.06 NL 0.94 OV 1.00* ! PT 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 1.03 KP 0.98 ! LA 0.97 MK 1.01 NL 1.00* OV 1.00* ! PT 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 1.04 HN 0.99 KP 0.84 ! LA 0.86 MK 1.17 NL 1.16 OV 1.00* ! PT 1.13 ! ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 0.85 KP 1.00* ! LA 0.73 MK 0.67 NL 1.00* OV 1.00* ! PT 1.00 ! ! ! Fit before self-cal, rms=0.081646Jy sigma=0.000620 ! Fit after self-cal, rms=0.077151Jy sigma=0.000618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.272 mas, bmaj=14.36 mas, bpa=-18.6 degrees ! Estimated noise=1066.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000424194 Jy ! Component: 100 - total flux cleaned = -0.000309043 Jy ! Component: 150 - total flux cleaned = -0.000276202 Jy ! Component: 200 - total flux cleaned = -0.000274673 Jy ! Total flux subtracted in 200 components = -0.000274673 Jy ! Clean residual min=-0.002320 max=0.002128 Jy/beam ! Clean residual mean=0.000000 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0462569 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.0462569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077119Jy sigma=0.000618 ! Fit after self-cal, rms=0.076843Jy sigma=0.000617 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076843Jy sigma=0.000617 ! Fit after self-cal, rms=0.075568Jy sigma=0.000616 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=13.96 mas, bpa=-18.51 degrees ! Estimated noise=1059.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108539 Jy ! Component: 100 - total flux cleaned = 0.000113117 Jy ! Component: 150 - total flux cleaned = 0.000114737 Jy ! Component: 200 - total flux cleaned = 0.000114836 Jy ! Total flux subtracted in 200 components = 0.000114836 Jy ! Clean residual min=-0.002105 max=0.001938 Jy/beam ! Clean residual mean=0.000001 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0463718 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.0463718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075541Jy sigma=0.000615 ! Fit after self-cal, rms=0.075540Jy sigma=0.000615 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570203 Jy ! Component: 100 - total flux cleaned = -0.00068362 Jy ! Component: 150 - total flux cleaned = -0.000683515 Jy ! Component: 200 - total flux cleaned = -0.000684705 Jy ! Total flux subtracted in 200 components = -0.000684705 Jy ! Clean residual min=-0.002367 max=0.002003 Jy/beam ! Clean residual mean=0.000004 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0456871 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.0456871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075520Jy sigma=0.000615 ! Fit after self-cal, rms=0.075508Jy sigma=0.000615 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075508Jy sigma=0.000615 ! Fit after self-cal, rms=0.075968Jy sigma=0.000615 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=13.8 mas, bpa=-18.48 degrees ! Estimated noise=1060.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216533 Jy ! Component: 100 - total flux cleaned = 0.000114464 Jy ! Component: 150 - total flux cleaned = 9.19768e-05 Jy ! Component: 200 - total flux cleaned = 7.19074e-05 Jy ! Total flux subtracted in 200 components = 7.19074e-05 Jy ! Clean residual min=-0.002303 max=0.002023 Jy/beam ! Clean residual mean=0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.045759 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.045759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075951Jy sigma=0.000614 ! Fit after self-cal, rms=0.075988Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208639 Jy ! Component: 100 - total flux cleaned = -0.000275045 Jy ! Component: 150 - total flux cleaned = -0.000293989 Jy ! Component: 200 - total flux cleaned = -0.0002943 Jy ! Total flux subtracted in 200 components = -0.0002943 Jy ! Clean residual min=-0.002358 max=0.002056 Jy/beam ! Clean residual mean=0.000003 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0454647 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 76 components and 0.0454647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075977Jy sigma=0.000614 ! Fit after self-cal, rms=0.075973Jy sigma=0.000614 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075973Jy sigma=0.000614 ! Fit after self-cal, rms=0.076354Jy sigma=0.000614 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.466 mas, bmaj=13.9 mas, bpa=-17.03 degrees ! Estimated noise=1309.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134241 Jy ! Component: 100 - total flux cleaned = -0.00013565 Jy ! Component: 150 - total flux cleaned = -0.000158297 Jy ! Component: 200 - total flux cleaned = -0.000158602 Jy ! Total flux subtracted in 200 components = -0.000158602 Jy ! Clean residual min=-0.003008 max=0.002566 Jy/beam ! Clean residual mean=0.000007 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.0453061 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.0453061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076350Jy sigma=0.000614 ! Fit after self-cal, rms=0.076366Jy sigma=0.000614 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165549 Jy ! Component: 100 - total flux cleaned = -0.000163163 Jy ! Component: 150 - total flux cleaned = -0.000161721 Jy ! Component: 200 - total flux cleaned = -0.00014551 Jy ! Total flux subtracted in 200 components = -0.00014551 Jy ! Clean residual min=-0.002994 max=0.002621 Jy/beam ! Clean residual mean=0.000008 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0451606 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.0451606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076365Jy sigma=0.000614 ! Fit after self-cal, rms=0.076356Jy sigma=0.000614 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=13.71 mas, bpa=-18.47 degrees ! Estimated noise=1062.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 13.71 at -18.47 degrees (North through East) ! Clean map min=-0.0035941 max=0.047312 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=12.22 mas, bpa=-18.65 degrees ! Estimated noise=1465.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0361834 Jy ! Component: 100 - total flux cleaned = 0.0419166 Jy ! Component: 150 - total flux cleaned = 0.0427141 Jy ! Component: 200 - total flux cleaned = 0.0431936 Jy ! Total flux subtracted in 200 components = 0.0431936 Jy ! Clean residual min=-0.003663 max=0.004094 Jy/beam ! Clean residual mean=0.000002 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.0431936 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0431936 Jy ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=13.71 mas, bpa=-18.47 degrees ! Estimated noise=1062.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104557 Jy ! Component: 100 - total flux cleaned = 0.00131248 Jy ! Component: 150 - total flux cleaned = 0.00146286 Jy ! Component: 200 - total flux cleaned = 0.00140629 Jy ! Total flux subtracted in 200 components = 0.00140629 Jy ! Clean residual min=-0.002583 max=0.002403 Jy/beam ! Clean residual mean=0.000004 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0445999 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.0445999 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.466 mas, bmaj=13.9 mas, bpa=-17.03 degrees ! Estimated noise=1309.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119706 Jy ! Component: 100 - total flux cleaned = 0.00012276 Jy ! Component: 150 - total flux cleaned = 0.000125252 Jy ! Component: 200 - total flux cleaned = 0.000123868 Jy ! Total flux subtracted in 200 components = 0.000123868 Jy ! Clean residual min=-0.003145 max=0.002710 Jy/beam ! Clean residual mean=0.000007 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.0447238 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.94498e-07 Jy ! Component: 100 - total flux cleaned = -3.11653e-05 Jy ! Component: 150 - total flux cleaned = -3.19649e-05 Jy ! Component: 200 - total flux cleaned = -1.00458e-05 Jy ! Total flux subtracted in 200 components = -1.00458e-05 Jy ! Clean residual min=-0.003029 max=0.002624 Jy/beam ! Clean residual mean=0.000007 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0447137 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 61 components and 0.0447137 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=13.71 mas, bpa=-18.47 degrees ! Estimated noise=1062.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156122 Jy ! Component: 100 - total flux cleaned = 0.000314441 Jy ! Component: 150 - total flux cleaned = 0.000287669 Jy ! Component: 200 - total flux cleaned = 0.000288459 Jy ! Total flux subtracted in 200 components = 0.000288459 Jy ! Clean residual min=-0.002327 max=0.002188 Jy/beam ! Clean residual mean=0.000003 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.0450022 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.0450022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076367Jy sigma=0.000614 ! Fit after self-cal, rms=0.076367Jy sigma=0.000614 wmodel J1724+0224_S_2017_10_09_pus_map.mod ! Writing 71 model components to file: J1724+0224_S_2017_10_09_pus_map.mod wobs J1724+0224_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1724+0224_S_2017_10_09_pus_uvs.fits wwins J1724+0224_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1724+0224_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000250314 Jy ! Component: 100 - total flux cleaned = -0.000143897 Jy ! Component: 150 - total flux cleaned = 8.89017e-05 Jy ! Component: 200 - total flux cleaned = 0.000373909 Jy ! Component: 250 - total flux cleaned = 0.000647702 Jy ! Component: 300 - total flux cleaned = 0.000911501 Jy ! Component: 350 - total flux cleaned = 0.00116557 Jy ! Component: 400 - total flux cleaned = 0.00130213 Jy ! Component: 450 - total flux cleaned = 0.00146092 Jy ! Component: 500 - total flux cleaned = 0.0016149 Jy ! Component: 550 - total flux cleaned = 0.00176417 Jy ! Component: 600 - total flux cleaned = 0.00188494 Jy ! Component: 650 - total flux cleaned = 0.00202576 Jy ! Component: 700 - total flux cleaned = 0.00209494 Jy ! Component: 750 - total flux cleaned = 0.00220721 Jy ! Component: 800 - total flux cleaned = 0.00225074 Jy ! Component: 850 - total flux cleaned = 0.00222909 Jy ! Component: 900 - total flux cleaned = 0.00227057 Jy ! Component: 950 - total flux cleaned = 0.00222902 Jy ! Component: 1000 - total flux cleaned = 0.00224903 Jy ! Component: 1050 - total flux cleaned = 0.00224875 Jy ! Component: 1100 - total flux cleaned = 0.00228787 Jy ! Component: 1150 - total flux cleaned = 0.0023452 Jy ! Component: 1200 - total flux cleaned = 0.0023448 Jy ! Component: 1250 - total flux cleaned = 0.00238204 Jy ! Component: 1300 - total flux cleaned = 0.00245486 Jy ! Component: 1350 - total flux cleaned = 0.00249072 Jy ! Component: 1400 - total flux cleaned = 0.00254369 Jy ! Component: 1450 - total flux cleaned = 0.00254362 Jy ! Component: 1500 - total flux cleaned = 0.00256114 Jy ! Component: 1550 - total flux cleaned = 0.00259494 Jy ! Component: 1600 - total flux cleaned = 0.00266135 Jy ! Component: 1650 - total flux cleaned = 0.00272694 Jy ! Component: 1700 - total flux cleaned = 0.00277539 Jy ! Component: 1750 - total flux cleaned = 0.00283915 Jy ! Component: 1800 - total flux cleaned = 0.00291744 Jy ! Component: 1850 - total flux cleaned = 0.00296356 Jy ! Component: 1900 - total flux cleaned = 0.00303995 Jy ! Component: 1950 - total flux cleaned = 0.00310034 Jy ! Component: 2000 - total flux cleaned = 0.00315969 Jy ! Component: 2050 - total flux cleaned = 0.00320315 Jy ! Component: 2100 - total flux cleaned = 0.00317425 Jy ! Component: 2150 - total flux cleaned = 0.00320276 Jy ! Component: 2200 - total flux cleaned = 0.0032027 Jy ! Component: 2250 - total flux cleaned = 0.00314689 Jy ! Component: 2300 - total flux cleaned = 0.00320207 Jy ! Component: 2350 - total flux cleaned = 0.00325665 Jy ! Component: 2400 - total flux cleaned = 0.00328378 Jy ! Component: 2450 - total flux cleaned = 0.0033908 Jy ! Component: 2500 - total flux cleaned = 0.00344382 Jy ! Component: 2550 - total flux cleaned = 0.00354862 Jy ! Component: 2600 - total flux cleaned = 0.00356161 Jy ! Component: 2650 - total flux cleaned = 0.00361299 Jy ! Component: 2700 - total flux cleaned = 0.00371518 Jy ! Component: 2750 - total flux cleaned = 0.00375294 Jy ! Component: 2800 - total flux cleaned = 0.00381559 Jy ! Component: 2850 - total flux cleaned = 0.00389011 Jy ! Component: 2900 - total flux cleaned = 0.00398835 Jy ! Component: 2950 - total flux cleaned = 0.00402491 Jy ! Component: 3000 - total flux cleaned = 0.00407331 Jy ! Component: 3050 - total flux cleaned = 0.0041332 Jy ! Component: 3100 - total flux cleaned = 0.00422813 Jy ! Component: 3150 - total flux cleaned = 0.0042516 Jy ! Component: 3200 - total flux cleaned = 0.00429812 Jy ! Component: 3250 - total flux cleaned = 0.0043098 Jy ! Component: 3300 - total flux cleaned = 0.00436719 Jy ! Component: 3350 - total flux cleaned = 0.00445813 Jy ! Component: 3400 - total flux cleaned = 0.00446945 Jy ! Component: 3450 - total flux cleaned = 0.00453666 Jy ! Component: 3500 - total flux cleaned = 0.00459219 Jy ! Component: 3550 - total flux cleaned = 0.00463636 Jy ! Component: 3600 - total flux cleaned = 0.00469102 Jy ! Component: 3650 - total flux cleaned = 0.00477787 Jy ! Component: 3700 - total flux cleaned = 0.00478868 Jy ! Component: 3750 - total flux cleaned = 0.00484234 Jy ! Component: 3800 - total flux cleaned = 0.00493819 Jy ! Component: 3850 - total flux cleaned = 0.00494881 Jy ! Component: 3900 - total flux cleaned = 0.00503293 Jy ! Component: 3950 - total flux cleaned = 0.00507475 Jy ! Component: 4000 - total flux cleaned = 0.00513706 Jy ! Component: 4050 - total flux cleaned = 0.00517831 Jy ! Total flux subtracted in 4096 components = 0.00523972 Jy ! Clean residual min=-0.000682 max=0.000680 Jy/beam ! Clean residual mean=-0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0502419 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 365 components and 0.0502419 Jy ![Exited script file: muppet] wmap "J1724+0224_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 13.71 at -18.47 degrees (North through East) ! Clean map min=-0.0032457 max=0.047092 Jy/beam ! Writing clean map to FITS file: J1724+0224_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0470924 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192249 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22471 1.22471 2.44942 4.89884 9.79769 19.5954 39.1907 78.3815 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 13.71 at -18.47 degrees (North through East) ! Clean map min=-0.0032457 max=0.047092 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1724+0224_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:16:47 2019