! Started logfile: J1721-2558_S_2017_05_27_pus_uvs.log on Fri May 3 11:11:44 2019 obs J1721-2558_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1721-2558_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.740741 visibilities/baseline/integration-bin. ! Found source: J1721-2558 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 15200 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1721-2558_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 230 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 691 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978784Jy sigma=0.035078 ! Fit after self-cal, rms=0.941362Jy sigma=0.034804 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.711 mas, bmaj=7.311 mas, bpa=-11.75 degrees ! Estimated noise=1062.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282313 Jy ! Component: 100 - total flux cleaned = 0.0373387 Jy ! Total flux subtracted in 100 components = 0.0373387 Jy ! Clean residual min=-0.012018 max=0.011645 Jy/beam ! Clean residual mean=-0.000026 rms=0.003696 Jy/beam ! Combined flux in latest and established models = 0.0373387 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0373387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148461Jy sigma=0.001347 ! Fit after self-cal, rms=0.148255Jy sigma=0.001329 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.925 mas, bmaj=10.13 mas, bpa=-9.749 degrees ! Estimated noise=616.664 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425215 Jy ! Component: 100 - total flux cleaned = 0.0043296 Jy ! Component: 150 - total flux cleaned = 0.00426503 Jy ! Component: 200 - total flux cleaned = 0.00426771 Jy ! Total flux subtracted in 200 components = 0.00426771 Jy ! Clean residual min=-0.014016 max=0.013735 Jy/beam ! Clean residual mean=-0.000084 rms=0.005032 Jy/beam ! Combined flux in latest and established models = 0.0416064 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.0416064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147182Jy sigma=0.001450 ! Fit after self-cal, rms=0.147141Jy sigma=0.001450 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.58 FD 0.70 HN 0.84 KP 0.71 ! LA 0.74 MK 0.84 NL 0.75 OV 0.83 ! PT 0.73 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 9.97 FD 0.75 HN 0.98 KP 0.76 ! LA 0.69 MK 0.83 NL 0.88 OV 0.83 ! PT 0.76 SC 1.36 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.24 FD 0.70 HN 0.89 KP 0.72 ! LA 0.68 MK 0.85 NL 0.80 OV 0.74 ! PT 0.70 SC 0.99 ! ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.89 KP 1.00* ! LA 15.47 MK 0.58 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.147141Jy sigma=0.001450 ! Fit after self-cal, rms=0.386043Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=10.26 mas, bpa=-7.573 degrees ! Estimated noise=648.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026195 Jy ! Component: 100 - total flux cleaned = 0.00358581 Jy ! Component: 150 - total flux cleaned = 0.00370986 Jy ! Component: 200 - total flux cleaned = 0.00373784 Jy ! Total flux subtracted in 200 components = 0.00373784 Jy ! Clean residual min=-0.002602 max=0.002398 Jy/beam ! Clean residual mean=-0.000011 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.0453443 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.0453443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385762Jy sigma=0.000660 ! Fit after self-cal, rms=0.386541Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.386541Jy sigma=0.000653 ! Fit after self-cal, rms=0.513355Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.634 mas, bmaj=10.05 mas, bpa=-9.298 degrees ! Estimated noise=652.609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198425 Jy ! Component: 100 - total flux cleaned = 0.00285285 Jy ! Component: 150 - total flux cleaned = 0.00289707 Jy ! Component: 200 - total flux cleaned = 0.00291797 Jy ! Total flux subtracted in 200 components = 0.00291797 Jy ! Clean residual min=-0.002114 max=0.002013 Jy/beam ! Clean residual mean=-0.000014 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0482622 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 0.0482622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513152Jy sigma=0.000650 ! Fit after self-cal, rms=0.513175Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167137 Jy ! Component: 100 - total flux cleaned = 0.000212358 Jy ! Component: 150 - total flux cleaned = 0.000254492 Jy ! Component: 200 - total flux cleaned = 0.000254472 Jy ! Total flux subtracted in 200 components = 0.000254472 Jy ! Clean residual min=-0.002124 max=0.001944 Jy/beam ! Clean residual mean=-0.000014 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.0485167 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.0485167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513152Jy sigma=0.000650 ! Fit after self-cal, rms=0.513155Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.513155Jy sigma=0.000650 ! Fit after self-cal, rms=0.482354Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=9.85 mas, bpa=-9.737 degrees ! Estimated noise=661.325 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156842 Jy ! Component: 100 - total flux cleaned = 0.00213672 Jy ! Component: 150 - total flux cleaned = 0.00215489 Jy ! Component: 200 - total flux cleaned = 0.00217327 Jy ! Total flux subtracted in 200 components = 0.00217327 Jy ! Clean residual min=-0.002222 max=0.002008 Jy/beam ! Clean residual mean=0.000000 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.05069 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.05069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.482211Jy sigma=0.000647 ! Fit after self-cal, rms=0.482206Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.61156e-05 Jy ! Component: 100 - total flux cleaned = 0.000105852 Jy ! Component: 150 - total flux cleaned = 0.000104308 Jy ! Component: 200 - total flux cleaned = 0.000104359 Jy ! Total flux subtracted in 200 components = 0.000104359 Jy ! Clean residual min=-0.002335 max=0.001986 Jy/beam ! Clean residual mean=-0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0507943 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 50 components and 0.0507943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.482184Jy sigma=0.000647 ! Fit after self-cal, rms=0.482183Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.482183Jy sigma=0.000647 ! Fit after self-cal, rms=0.509174Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.629 mas, bmaj=23.12 mas, bpa=-3.843 degrees ! Estimated noise=785.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201124 Jy ! Component: 100 - total flux cleaned = 0.00244776 Jy ! Component: 150 - total flux cleaned = 0.00246915 Jy ! Component: 200 - total flux cleaned = 0.00249031 Jy ! Total flux subtracted in 200 components = 0.00249031 Jy ! Clean residual min=-0.002895 max=0.002495 Jy/beam ! Clean residual mean=0.000006 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.0532846 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.0532846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.509013Jy sigma=0.000646 ! Fit after self-cal, rms=0.509014Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.65684e-05 Jy ! Component: 100 - total flux cleaned = 8.79876e-05 Jy ! Component: 150 - total flux cleaned = 8.81545e-05 Jy ! Component: 200 - total flux cleaned = 0.000107751 Jy ! Total flux subtracted in 200 components = 0.000107751 Jy ! Clean residual min=-0.002919 max=0.002499 Jy/beam ! Clean residual mean=0.000005 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0533924 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 53 components and 0.0533924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.508994Jy sigma=0.000646 ! Fit after self-cal, rms=0.508996Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=9.683 mas, bpa=-9.769 degrees ! Estimated noise=670.962 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.438 x 9.683 at -9.769 degrees (North through East) ! Clean map min=-0.0024107 max=0.040872 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.509 mas, bmaj=7.368 mas, bpa=-11.2 degrees ! Estimated noise=1078.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302058 Jy ! Component: 100 - total flux cleaned = 0.0400863 Jy ! Component: 150 - total flux cleaned = 0.0457414 Jy ! Component: 200 - total flux cleaned = 0.0491038 Jy ! Total flux subtracted in 200 components = 0.0491038 Jy ! Clean residual min=-0.003524 max=0.003437 Jy/beam ! Clean residual mean=-0.000002 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.0491037 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0491037 Jy ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=9.683 mas, bpa=-9.769 degrees ! Estimated noise=670.962 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312972 Jy ! Component: 100 - total flux cleaned = 0.00362019 Jy ! Component: 150 - total flux cleaned = 0.00388603 Jy ! Component: 200 - total flux cleaned = 0.00380052 Jy ! Total flux subtracted in 200 components = 0.00380052 Jy ! Clean residual min=-0.002377 max=0.002118 Jy/beam ! Clean residual mean=0.000002 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.0529043 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 0.0529043 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.629 mas, bmaj=23.12 mas, bpa=-3.843 degrees ! Estimated noise=785.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307894 Jy ! Component: 100 - total flux cleaned = -0.00045846 Jy ! Component: 150 - total flux cleaned = -0.000597505 Jy ! Component: 200 - total flux cleaned = -0.000725321 Jy ! Total flux subtracted in 200 components = -0.000725321 Jy ! Clean residual min=-0.002463 max=0.002352 Jy/beam ! Clean residual mean=0.000001 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0521789 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118025 Jy ! Component: 100 - total flux cleaned = -0.000227328 Jy ! Component: 150 - total flux cleaned = -0.000330538 Jy ! Component: 200 - total flux cleaned = -0.000425077 Jy ! Total flux subtracted in 200 components = -0.000425077 Jy ! Clean residual min=-0.002371 max=0.002303 Jy/beam ! Clean residual mean=-0.000001 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.0517539 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.0517539 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=9.683 mas, bpa=-9.769 degrees ! Estimated noise=670.962 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.10732e-05 Jy ! Component: 100 - total flux cleaned = -2.3926e-05 Jy ! Component: 150 - total flux cleaned = -0.000135409 Jy ! Component: 200 - total flux cleaned = -0.000202654 Jy ! Total flux subtracted in 200 components = -0.000202654 Jy ! Clean residual min=-0.002115 max=0.002176 Jy/beam ! Clean residual mean=-0.000000 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0515512 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.0515512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.508771Jy sigma=0.000647 ! Fit after self-cal, rms=0.508805Jy sigma=0.000646 wmodel J1721-2558_S_2017_05_27_pus_map.mod ! Writing 70 model components to file: J1721-2558_S_2017_05_27_pus_map.mod wobs J1721-2558_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1721-2558_S_2017_05_27_pus_uvs.fits wwins J1721-2558_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1721-2558_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000372868 Jy ! Component: 100 - total flux cleaned = -0.000305176 Jy ! Component: 150 - total flux cleaned = -0.00011541 Jy ! Component: 200 - total flux cleaned = 3.55261e-05 Jy ! Component: 250 - total flux cleaned = 0.000181762 Jy ! Component: 300 - total flux cleaned = 0.000352045 Jy ! Component: 350 - total flux cleaned = 0.000461927 Jy ! Component: 400 - total flux cleaned = 0.000596553 Jy ! Component: 450 - total flux cleaned = 0.000701066 Jy ! Component: 500 - total flux cleaned = 0.000649239 Jy ! Component: 550 - total flux cleaned = 0.000623277 Jy ! Component: 600 - total flux cleaned = 0.000427927 Jy ! Component: 650 - total flux cleaned = 0.00035691 Jy ! Component: 700 - total flux cleaned = 0.000287208 Jy ! Component: 750 - total flux cleaned = 0.00026441 Jy ! Component: 800 - total flux cleaned = 0.000196594 Jy ! Component: 850 - total flux cleaned = 0.00017409 Jy ! Component: 900 - total flux cleaned = 4.33435e-05 Jy ! Component: 950 - total flux cleaned = -4.19181e-05 Jy ! Component: 1000 - total flux cleaned = -8.34803e-05 Jy ! Component: 1050 - total flux cleaned = -0.000104189 Jy ! Component: 1100 - total flux cleaned = -0.00020572 Jy ! Component: 1150 - total flux cleaned = -0.000185427 Jy ! Component: 1200 - total flux cleaned = -0.000185721 Jy ! Component: 1250 - total flux cleaned = -0.000263782 Jy ! Component: 1300 - total flux cleaned = -0.000244286 Jy ! Component: 1350 - total flux cleaned = -0.000319931 Jy ! Component: 1400 - total flux cleaned = -0.000338095 Jy ! Component: 1450 - total flux cleaned = -0.000356229 Jy ! Component: 1500 - total flux cleaned = -0.000447093 Jy ! Component: 1550 - total flux cleaned = -0.000428746 Jy ! Component: 1600 - total flux cleaned = -0.000446395 Jy ! Component: 1650 - total flux cleaned = -0.000499385 Jy ! Component: 1700 - total flux cleaned = -0.000516978 Jy ! Component: 1750 - total flux cleaned = -0.000603218 Jy ! Component: 1800 - total flux cleaned = -0.000586251 Jy ! Component: 1850 - total flux cleaned = -0.000619933 Jy ! Component: 1900 - total flux cleaned = -0.000603543 Jy ! Component: 1950 - total flux cleaned = -0.000669758 Jy ! Component: 2000 - total flux cleaned = -0.00073506 Jy ! Component: 2050 - total flux cleaned = -0.000783272 Jy ! Component: 2100 - total flux cleaned = -0.000767074 Jy ! Component: 2150 - total flux cleaned = -0.000830404 Jy ! Component: 2200 - total flux cleaned = -0.000814783 Jy ! Component: 2250 - total flux cleaned = -0.000861343 Jy ! Component: 2300 - total flux cleaned = -0.000892067 Jy ! Component: 2350 - total flux cleaned = -0.000876941 Jy ! Component: 2400 - total flux cleaned = -0.000861881 Jy ! Component: 2450 - total flux cleaned = -0.000787315 Jy ! Component: 2500 - total flux cleaned = -0.000787173 Jy ! Component: 2550 - total flux cleaned = -0.000757738 Jy ! Component: 2600 - total flux cleaned = -0.00068493 Jy ! Component: 2650 - total flux cleaned = -0.000670613 Jy ! Component: 2700 - total flux cleaned = -0.000641937 Jy ! Component: 2750 - total flux cleaned = -0.00067048 Jy ! Component: 2800 - total flux cleaned = -0.000656202 Jy ! Component: 2850 - total flux cleaned = -0.000670107 Jy ! Component: 2900 - total flux cleaned = -0.000642308 Jy ! Component: 2950 - total flux cleaned = -0.000642486 Jy ! Component: 3000 - total flux cleaned = -0.00068368 Jy ! Component: 3050 - total flux cleaned = -0.000642854 Jy ! Component: 3100 - total flux cleaned = -0.000656381 Jy ! Component: 3150 - total flux cleaned = -0.000629462 Jy ! Component: 3200 - total flux cleaned = -0.000616132 Jy ! Component: 3250 - total flux cleaned = -0.000616016 Jy ! Component: 3300 - total flux cleaned = -0.000602788 Jy ! Component: 3350 - total flux cleaned = -0.000563588 Jy ! Component: 3400 - total flux cleaned = -0.000576573 Jy ! Component: 3450 - total flux cleaned = -0.000563621 Jy ! Component: 3500 - total flux cleaned = -0.00055075 Jy ! Component: 3550 - total flux cleaned = -0.000576176 Jy ! Component: 3600 - total flux cleaned = -0.000588679 Jy ! Component: 3650 - total flux cleaned = -0.000576094 Jy ! Component: 3700 - total flux cleaned = -0.000563632 Jy ! Component: 3750 - total flux cleaned = -0.000526498 Jy ! Component: 3800 - total flux cleaned = -0.000551217 Jy ! Component: 3850 - total flux cleaned = -0.000538885 Jy ! Component: 3900 - total flux cleaned = -0.000538978 Jy ! Component: 3950 - total flux cleaned = -0.000551213 Jy ! Component: 4000 - total flux cleaned = -0.000551345 Jy ! Component: 4050 - total flux cleaned = -0.000587131 Jy ! Total flux subtracted in 4096 components = -0.000575232 Jy ! Clean residual min=-0.000801 max=0.000720 Jy/beam ! Clean residual mean=-0.000002 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.050976 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 313 components and 0.050976 Jy ![Exited script file: muppet] wmap "J1721-2558_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.438 x 9.683 at -9.769 degrees (North through East) ! Clean map min=-0.0037343 max=0.041387 Jy/beam ! Writing clean map to FITS file: J1721-2558_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0413871 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000202507 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.4679 1.4679 2.93581 5.87161 11.7432 23.4865 46.9729 93.9458 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.041 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.438 x 9.683 at -9.769 degrees (North through East) ! Clean map min=-0.0037343 max=0.041387 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1721-2558_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:11:49 2019