! Started logfile: J1720-2258_S_2017_05_27_pus_uvs.log on Fri May 3 11:11:40 2019 obs J1720-2258_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1720-2258_S_2017_05_27_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.615407 visibilities/baseline/integration-bin. ! Found source: J1720-2258 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 8308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1720-2258_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 159 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 307 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 279 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 540 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.939301Jy sigma=0.069105 ! Fit after self-cal, rms=0.921657Jy sigma=0.068905 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.3 mas, bmaj=19.45 mas, bpa=20.96 degrees ! Estimated noise=600.001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020605 Jy ! Component: 100 - total flux cleaned = 0.0339164 Jy ! Total flux subtracted in 100 components = 0.0339164 Jy ! Clean residual min=-0.005921 max=0.008096 Jy/beam ! Clean residual mean=-0.000029 rms=0.001945 Jy/beam ! Combined flux in latest and established models = 0.0339164 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0339164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143129Jy sigma=0.001270 ! Fit after self-cal, rms=0.142716Jy sigma=0.001253 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.25 mas, bmaj=20.96 mas, bpa=18.11 degrees ! Estimated noise=475.113 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106084 Jy ! Component: 100 - total flux cleaned = 0.0117995 Jy ! Component: 150 - total flux cleaned = 0.0123124 Jy ! Component: 200 - total flux cleaned = 0.0127677 Jy ! Total flux subtracted in 200 components = 0.0127677 Jy ! Clean residual min=-0.007575 max=0.010788 Jy/beam ! Clean residual mean=-0.000068 rms=0.002985 Jy/beam ! Combined flux in latest and established models = 0.0466841 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.0466841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138130Jy sigma=0.001420 ! Fit after self-cal, rms=0.137468Jy sigma=0.001418 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.34 FD 0.55 HN 0.89 KP 0.73 ! LA 0.69 MK 1.00* NL 0.76 OV 0.68 ! PT 0.78 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.66 HN 1.00* KP 0.69 ! LA 0.69 MK 1.00* NL 0.92 OV 0.68 ! PT 0.73 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 7.59 FD 0.60 HN 1.00* KP 0.79 ! LA 0.69 MK 1.00* NL 0.90 OV 0.87 ! PT 0.79 SC 1.00* ! ! ! Correcting IF 4. ! A total of 210 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.137468Jy sigma=0.001418 ! Fit after self-cal, rms=0.055571Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.623 mas, bmaj=19.42 mas, bpa=7.452 degrees ! Estimated noise=677.486 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000301521 Jy ! Component: 100 - total flux cleaned = -0.000722143 Jy ! Component: 150 - total flux cleaned = -0.00098641 Jy ! Component: 200 - total flux cleaned = -0.00119577 Jy ! Total flux subtracted in 200 components = -0.00119577 Jy ! Clean residual min=-0.002419 max=0.002068 Jy/beam ! Clean residual mean=0.000001 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0454883 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 40 components and 0.0454883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055294Jy sigma=0.000682 ! Fit after self-cal, rms=0.054078Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054078Jy sigma=0.000668 ! Fit after self-cal, rms=0.050133Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.727 mas, bmaj=20.1 mas, bpa=6.252 degrees ! Estimated noise=693.112 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227224 Jy ! Component: 100 - total flux cleaned = -0.00047746 Jy ! Component: 150 - total flux cleaned = -0.000676305 Jy ! Component: 200 - total flux cleaned = -0.000719721 Jy ! Total flux subtracted in 200 components = -0.000719721 Jy ! Clean residual min=-0.001963 max=0.001675 Jy/beam ! Clean residual mean=-0.000006 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0447686 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.0447686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050000Jy sigma=0.000655 ! Fit after self-cal, rms=0.049905Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.09601e-05 Jy ! Component: 100 - total flux cleaned = 0.00014662 Jy ! Component: 150 - total flux cleaned = 0.000232479 Jy ! Component: 200 - total flux cleaned = 0.000258984 Jy ! Total flux subtracted in 200 components = 0.000258984 Jy ! Clean residual min=-0.001932 max=0.001575 Jy/beam ! Clean residual mean=-0.000007 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0450276 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.0450276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049856Jy sigma=0.000654 ! Fit after self-cal, rms=0.049872Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049872Jy sigma=0.000654 ! Fit after self-cal, rms=0.049210Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.736 mas, bmaj=20.23 mas, bpa=5.916 degrees ! Estimated noise=699.863 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.59732e-05 Jy ! Component: 100 - total flux cleaned = -7.94888e-05 Jy ! Component: 150 - total flux cleaned = -0.000109303 Jy ! Component: 200 - total flux cleaned = -6.01026e-05 Jy ! Total flux subtracted in 200 components = -6.01026e-05 Jy ! Clean residual min=-0.001814 max=0.001503 Jy/beam ! Clean residual mean=-0.000006 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0449675 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.0449675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049169Jy sigma=0.000651 ! Fit after self-cal, rms=0.049157Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152712 Jy ! Component: 100 - total flux cleaned = 0.00019797 Jy ! Component: 150 - total flux cleaned = 0.000218888 Jy ! Component: 200 - total flux cleaned = 0.000218727 Jy ! Total flux subtracted in 200 components = 0.000218727 Jy ! Clean residual min=-0.001786 max=0.001434 Jy/beam ! Clean residual mean=-0.000006 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.0451862 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.0451862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049136Jy sigma=0.000651 ! Fit after self-cal, rms=0.049139Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049139Jy sigma=0.000651 ! Fit after self-cal, rms=0.049180Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.12 mas, bmaj=24.43 mas, bpa=2.218 degrees ! Estimated noise=714.365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.56206e-06 Jy ! Component: 100 - total flux cleaned = 6.28084e-06 Jy ! Component: 150 - total flux cleaned = 4.06271e-05 Jy ! Component: 200 - total flux cleaned = 7.08752e-05 Jy ! Total flux subtracted in 200 components = 7.08752e-05 Jy ! Clean residual min=-0.001582 max=0.001373 Jy/beam ! Clean residual mean=-0.000008 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.0452571 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 82 components and 0.0452571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049158Jy sigma=0.000650 ! Fit after self-cal, rms=0.049155Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121192 Jy ! Component: 100 - total flux cleaned = 0.000159742 Jy ! Component: 150 - total flux cleaned = 0.000206137 Jy ! Component: 200 - total flux cleaned = 0.000248263 Jy ! Total flux subtracted in 200 components = 0.000248263 Jy ! Clean residual min=-0.001562 max=0.001388 Jy/beam ! Clean residual mean=-0.000008 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0455054 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.0455054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049146Jy sigma=0.000650 ! Fit after self-cal, rms=0.049151Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.735 mas, bmaj=20.32 mas, bpa=5.569 degrees ! Estimated noise=706.846 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.735 x 20.32 at 5.569 degrees (North through East) ! Clean map min=-0.0034143 max=0.037159 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.511 mas, bmaj=16.72 mas, bpa=7.172 degrees ! Estimated noise=1115.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330434 Jy ! Component: 100 - total flux cleaned = 0.0422224 Jy ! Component: 150 - total flux cleaned = 0.0447772 Jy ! Component: 200 - total flux cleaned = 0.0448806 Jy ! Total flux subtracted in 200 components = 0.0448806 Jy ! Clean residual min=-0.002382 max=0.002375 Jy/beam ! Clean residual mean=-0.000007 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0448806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0448806 Jy ! Inverting map and beam ! Estimated beam: bmin=6.735 mas, bmaj=20.32 mas, bpa=5.569 degrees ! Estimated noise=706.846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306273 Jy ! Component: 100 - total flux cleaned = 0.00041835 Jy ! Component: 150 - total flux cleaned = 0.000512412 Jy ! Component: 200 - total flux cleaned = 0.000590961 Jy ! Total flux subtracted in 200 components = 0.000590961 Jy ! Clean residual min=-0.001594 max=0.001557 Jy/beam ! Clean residual mean=-0.000007 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0454716 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.0454716 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.12 mas, bmaj=24.43 mas, bpa=2.218 degrees ! Estimated noise=714.365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.20296e-05 Jy ! Component: 100 - total flux cleaned = 0.000112558 Jy ! Component: 150 - total flux cleaned = 0.000131429 Jy ! Component: 200 - total flux cleaned = 0.000163788 Jy ! Total flux subtracted in 200 components = 0.000163788 Jy ! Clean residual min=-0.001493 max=0.001475 Jy/beam ! Clean residual mean=-0.000009 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0456354 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.45404e-05 Jy ! Component: 100 - total flux cleaned = 4.03666e-05 Jy ! Component: 150 - total flux cleaned = 8.72973e-05 Jy ! Component: 200 - total flux cleaned = 0.000119432 Jy ! Total flux subtracted in 200 components = 0.000119432 Jy ! Clean residual min=-0.001481 max=0.001476 Jy/beam ! Clean residual mean=-0.000008 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0457548 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 62 components and 0.0457548 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.735 mas, bmaj=20.32 mas, bpa=5.569 degrees ! Estimated noise=706.846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.80354e-05 Jy ! Component: 100 - total flux cleaned = -5.58278e-06 Jy ! Component: 150 - total flux cleaned = -1.88328e-05 Jy ! Component: 200 - total flux cleaned = -1.89076e-05 Jy ! Total flux subtracted in 200 components = -1.89076e-05 Jy ! Clean residual min=-0.001434 max=0.001438 Jy/beam ! Clean residual mean=-0.000006 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0457359 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 89 components and 0.0457359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049102Jy sigma=0.000650 ! Fit after self-cal, rms=0.049104Jy sigma=0.000650 wmodel J1720-2258_S_2017_05_27_pus_map.mod ! Writing 89 model components to file: J1720-2258_S_2017_05_27_pus_map.mod wobs J1720-2258_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1720-2258_S_2017_05_27_pus_uvs.fits wwins J1720-2258_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J1720-2258_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047282 Jy ! Component: 100 - total flux cleaned = -0.000694863 Jy ! Component: 150 - total flux cleaned = -0.000785333 Jy ! Component: 200 - total flux cleaned = -0.000762868 Jy ! Component: 250 - total flux cleaned = -0.00078278 Jy ! Component: 300 - total flux cleaned = -0.000763382 Jy ! Component: 350 - total flux cleaned = -0.000818679 Jy ! Component: 400 - total flux cleaned = -0.000853842 Jy ! Component: 450 - total flux cleaned = -0.000870592 Jy ! Component: 500 - total flux cleaned = -0.000886501 Jy ! Component: 550 - total flux cleaned = -0.000916848 Jy ! Component: 600 - total flux cleaned = -0.000960336 Jy ! Component: 650 - total flux cleaned = -0.00101687 Jy ! Component: 700 - total flux cleaned = -0.00111235 Jy ! Component: 750 - total flux cleaned = -0.00117828 Jy ! Component: 800 - total flux cleaned = -0.00125515 Jy ! Component: 850 - total flux cleaned = -0.0012803 Jy ! Component: 900 - total flux cleaned = -0.00132866 Jy ! Component: 950 - total flux cleaned = -0.00137553 Jy ! Component: 1000 - total flux cleaned = -0.00139817 Jy ! Component: 1050 - total flux cleaned = -0.00144219 Jy ! Component: 1100 - total flux cleaned = -0.00145298 Jy ! Component: 1150 - total flux cleaned = -0.00149489 Jy ! Component: 1200 - total flux cleaned = -0.00153593 Jy ! Component: 1250 - total flux cleaned = -0.00158575 Jy ! Component: 1300 - total flux cleaned = -0.00162446 Jy ! Component: 1350 - total flux cleaned = -0.00164352 Jy ! Component: 1400 - total flux cleaned = -0.0016714 Jy ! Component: 1450 - total flux cleaned = -0.0017348 Jy ! Component: 1500 - total flux cleaned = -0.00180586 Jy ! Component: 1550 - total flux cleaned = -0.00184099 Jy ! Component: 1600 - total flux cleaned = -0.00187543 Jy ! Component: 1650 - total flux cleaned = -0.00187559 Jy ! Component: 1700 - total flux cleaned = -0.00191738 Jy ! Component: 1750 - total flux cleaned = -0.00190913 Jy ! Component: 1800 - total flux cleaned = -0.00190919 Jy ! Component: 1850 - total flux cleaned = -0.00192526 Jy ! Component: 1900 - total flux cleaned = -0.00192521 Jy ! Component: 1950 - total flux cleaned = -0.00194083 Jy ! Component: 2000 - total flux cleaned = -0.00196389 Jy ! Component: 2050 - total flux cleaned = -0.00197167 Jy ! Component: 2100 - total flux cleaned = -0.00200959 Jy ! Component: 2150 - total flux cleaned = -0.00202465 Jy ! Component: 2200 - total flux cleaned = -0.00208387 Jy ! Component: 2250 - total flux cleaned = -0.00210577 Jy ! Component: 2300 - total flux cleaned = -0.00214912 Jy ! Component: 2350 - total flux cleaned = -0.00216338 Jy ! Component: 2400 - total flux cleaned = -0.00216338 Jy ! Component: 2450 - total flux cleaned = -0.00220567 Jy ! Component: 2500 - total flux cleaned = -0.00223367 Jy ! Component: 2550 - total flux cleaned = -0.00222673 Jy ! Component: 2600 - total flux cleaned = -0.00224743 Jy ! Component: 2650 - total flux cleaned = -0.00227476 Jy ! Component: 2700 - total flux cleaned = -0.00228835 Jy ! Component: 2750 - total flux cleaned = -0.00231522 Jy ! Component: 2800 - total flux cleaned = -0.00233522 Jy ! Component: 2850 - total flux cleaned = -0.00235511 Jy ! Component: 2900 - total flux cleaned = -0.00237484 Jy ! Component: 2950 - total flux cleaned = -0.00237485 Jy ! Component: 3000 - total flux cleaned = -0.0024009 Jy ! Component: 3050 - total flux cleaned = -0.00240737 Jy ! Component: 3100 - total flux cleaned = -0.0024138 Jy ! Component: 3150 - total flux cleaned = -0.00243942 Jy ! Component: 3200 - total flux cleaned = -0.00244577 Jy ! Component: 3250 - total flux cleaned = -0.00245213 Jy ! Component: 3300 - total flux cleaned = -0.00246475 Jy ! Component: 3350 - total flux cleaned = -0.00246478 Jy ! Component: 3400 - total flux cleaned = -0.00248355 Jy ! Component: 3450 - total flux cleaned = -0.00248354 Jy ! Component: 3500 - total flux cleaned = -0.00248978 Jy ! Component: 3550 - total flux cleaned = -0.00252068 Jy ! Component: 3600 - total flux cleaned = -0.00252066 Jy ! Component: 3650 - total flux cleaned = -0.00253293 Jy ! Component: 3700 - total flux cleaned = -0.0025329 Jy ! Component: 3750 - total flux cleaned = -0.00252076 Jy ! Component: 3800 - total flux cleaned = -0.00253292 Jy ! Component: 3850 - total flux cleaned = -0.00255111 Jy ! Component: 3900 - total flux cleaned = -0.0025692 Jy ! Component: 3950 - total flux cleaned = -0.00258122 Jy ! Component: 4000 - total flux cleaned = -0.00258121 Jy ! Component: 4050 - total flux cleaned = -0.00261122 Jy ! Total flux subtracted in 4096 components = -0.00261721 Jy ! Clean residual min=-0.000340 max=0.000311 Jy/beam ! Clean residual mean=-0.000001 rms=0.000116 Jy/beam ! Combined flux in latest and established models = 0.0431187 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 380 components and 0.0431187 Jy ![Exited script file: muppet] wmap "J1720-2258_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.735 x 20.32 at 5.569 degrees (North through East) ! Clean map min=-0.0025799 max=0.039252 Jy/beam ! Writing clean map to FITS file: J1720-2258_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0392521 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000113048 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.864014 0.864014 1.72803 3.45606 6.91211 13.8242 27.6485 55.2969 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.039 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.735 x 20.32 at 5.569 degrees (North through East) ! Clean map min=-0.0025799 max=0.039252 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1720-2258_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:11:44 2019