! Started logfile: J1720+3825_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:19:10 2019 obs J1720+3825_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1720+3825_S_2017_01_16_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.681928 visibilities/baseline/integration-bin. ! Found source: J1720+3825 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 10188 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1720+3825_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 366 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.897997Jy sigma=0.008165 ! Fit after self-cal, rms=0.891254Jy sigma=0.008115 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.658 mas, bmaj=6.678 mas, bpa=17.18 degrees ! Estimated noise=1145.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0893399 Jy ! Component: 100 - total flux cleaned = 0.108822 Jy ! Total flux subtracted in 100 components = 0.108822 Jy ! Clean residual min=-0.004377 max=0.005443 Jy/beam ! Clean residual mean=-0.000005 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.108822 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.108822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083873Jy sigma=0.000676 ! Fit after self-cal, rms=0.083852Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.277 mas, bmaj=7.23 mas, bpa=15.87 degrees ! Estimated noise=842.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400378 Jy ! Component: 100 - total flux cleaned = 0.00451 Jy ! Component: 150 - total flux cleaned = 0.00479224 Jy ! Component: 200 - total flux cleaned = 0.00508262 Jy ! Total flux subtracted in 200 components = 0.00508262 Jy ! Clean residual min=-0.003405 max=0.003717 Jy/beam ! Clean residual mean=-0.000006 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.113905 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.113905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083534Jy sigma=0.000673 ! Fit after self-cal, rms=0.083526Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.97 HN 0.96 KP 0.97 ! LA 1.04 MK 1.00* NL 0.88 OV 0.99 ! PT 1.00 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.03 HN 0.95 KP 0.95 ! LA 0.96 MK 1.00* NL 1.02 OV 1.00 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.03 HN 0.95 KP 1.00 ! LA 1.00 MK 1.00* NL 0.99 OV 0.96 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.06 HN 0.90 KP 1.00* ! LA 1.03 MK 1.00* NL 1.00* OV 0.92 ! PT 0.98 SC 1.14 ! ! ! Fit before self-cal, rms=0.083526Jy sigma=0.000673 ! Fit after self-cal, rms=0.084012Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.255 mas, bmaj=7.21 mas, bpa=14.85 degrees ! Estimated noise=832.196 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.63189e-05 Jy ! Component: 100 - total flux cleaned = -1.93267e-06 Jy ! Component: 150 - total flux cleaned = -3.45722e-05 Jy ! Component: 200 - total flux cleaned = -8.44662e-05 Jy ! Total flux subtracted in 200 components = -8.44662e-05 Jy ! Clean residual min=-0.002811 max=0.003150 Jy/beam ! Clean residual mean=-0.000007 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.113821 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.113821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083966Jy sigma=0.000668 ! Fit after self-cal, rms=0.083998Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083998Jy sigma=0.000668 ! Fit after self-cal, rms=0.090058Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.252 mas, bmaj=7.21 mas, bpa=14.75 degrees ! Estimated noise=834.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557986 Jy ! Component: 100 - total flux cleaned = 0.000584632 Jy ! Component: 150 - total flux cleaned = 0.000599548 Jy ! Component: 200 - total flux cleaned = 0.000613188 Jy ! Total flux subtracted in 200 components = 0.000613188 Jy ! Clean residual min=-0.002650 max=0.002463 Jy/beam ! Clean residual mean=0.000001 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.114434 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.114434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090048Jy sigma=0.000664 ! Fit after self-cal, rms=0.090187Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.02735e-05 Jy ! Component: 100 - total flux cleaned = -1.27059e-05 Jy ! Component: 150 - total flux cleaned = 1.07768e-05 Jy ! Component: 200 - total flux cleaned = 3.15523e-05 Jy ! Total flux subtracted in 200 components = 3.15523e-05 Jy ! Clean residual min=-0.002620 max=0.002460 Jy/beam ! Clean residual mean=0.000000 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.114465 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.114465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090182Jy sigma=0.000664 ! Fit after self-cal, rms=0.090182Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090182Jy sigma=0.000664 ! Fit after self-cal, rms=0.090752Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=7.204 mas, bpa=14.62 degrees ! Estimated noise=834.731 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313769 Jy ! Component: 100 - total flux cleaned = 0.000431524 Jy ! Component: 150 - total flux cleaned = 0.000452951 Jy ! Component: 200 - total flux cleaned = 0.000461793 Jy ! Total flux subtracted in 200 components = 0.000461793 Jy ! Clean residual min=-0.002551 max=0.002459 Jy/beam ! Clean residual mean=0.000001 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.114927 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.114927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090748Jy sigma=0.000664 ! Fit after self-cal, rms=0.090756Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.2714e-05 Jy ! Component: 100 - total flux cleaned = 5.34063e-06 Jy ! Component: 150 - total flux cleaned = 1.37648e-05 Jy ! Component: 200 - total flux cleaned = 2.91107e-05 Jy ! Total flux subtracted in 200 components = 2.91107e-05 Jy ! Clean residual min=-0.002538 max=0.002466 Jy/beam ! Clean residual mean=0.000001 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.114956 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.114956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090753Jy sigma=0.000664 ! Fit after self-cal, rms=0.090753Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090753Jy sigma=0.000664 ! Fit after self-cal, rms=0.090867Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.725 mas, bmaj=9.292 mas, bpa=-0.9042 degrees ! Estimated noise=989.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003888 Jy ! Component: 100 - total flux cleaned = 0.000432028 Jy ! Component: 150 - total flux cleaned = 0.000449537 Jy ! Component: 200 - total flux cleaned = 0.000456128 Jy ! Total flux subtracted in 200 components = 0.000456128 Jy ! Clean residual min=-0.002568 max=0.003559 Jy/beam ! Clean residual mean=0.000000 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.115412 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.115412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090868Jy sigma=0.000664 ! Fit after self-cal, rms=0.090872Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, 28). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00333772 Jy ! Component: 100 - total flux cleaned = 0.00480077 Jy ! Component: 150 - total flux cleaned = 0.0057168 Jy ! Component: 200 - total flux cleaned = 0.0064444 Jy ! Total flux subtracted in 200 components = 0.0064444 Jy ! Clean residual min=-0.002427 max=0.002066 Jy/beam ! Clean residual mean=0.000000 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.121857 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 108 components and 0.121857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090805Jy sigma=0.000663 ! Fit after self-cal, rms=0.090801Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=7.201 mas, bpa=14.51 degrees ! Estimated noise=834.929 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.25 x 7.201 at 14.51 degrees (North through East) ! Clean map min=-0.0022169 max=0.11315 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.636 mas, bmaj=6.641 mas, bpa=15.89 degrees ! Estimated noise=1132.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882069 Jy ! Component: 100 - total flux cleaned = 0.107505 Jy ! Component: 150 - total flux cleaned = 0.113688 Jy ! Component: 200 - total flux cleaned = 0.116144 Jy ! Total flux subtracted in 200 components = 0.116144 Jy ! Clean residual min=-0.003243 max=0.003106 Jy/beam ! Clean residual mean=0.000001 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 0.116144 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.116144 Jy ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=7.201 mas, bpa=14.51 degrees ! Estimated noise=834.929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186352 Jy ! Component: 100 - total flux cleaned = 0.00330628 Jy ! Component: 150 - total flux cleaned = 0.00440709 Jy ! Component: 200 - total flux cleaned = 0.00530785 Jy ! Total flux subtracted in 200 components = 0.00530785 Jy ! Clean residual min=-0.002660 max=0.002161 Jy/beam ! Clean residual mean=0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.121452 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 46 components and 0.121452 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.725 mas, bmaj=9.292 mas, bpa=-0.9042 degrees ! Estimated noise=989.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128213 Jy ! Component: 100 - total flux cleaned = 0.00201819 Jy ! Component: 150 - total flux cleaned = 0.00236943 Jy ! Component: 200 - total flux cleaned = 0.00267711 Jy ! Total flux subtracted in 200 components = 0.00267711 Jy ! Clean residual min=-0.002434 max=0.001979 Jy/beam ! Clean residual mean=0.000001 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.124129 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000252971 Jy ! Component: 100 - total flux cleaned = 0.000459248 Jy ! Component: 150 - total flux cleaned = 0.000648571 Jy ! Component: 200 - total flux cleaned = 0.000842647 Jy ! Total flux subtracted in 200 components = 0.000842647 Jy ! Clean residual min=-0.002320 max=0.001908 Jy/beam ! Clean residual mean=0.000001 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.124971 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 101 components and 0.124971 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.25 mas, bmaj=7.201 mas, bpa=14.51 degrees ! Estimated noise=834.929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.75912e-06 Jy ! Component: 100 - total flux cleaned = 0.000107024 Jy ! Component: 150 - total flux cleaned = 0.000138615 Jy ! Component: 200 - total flux cleaned = 0.00025397 Jy ! Total flux subtracted in 200 components = 0.00025397 Jy ! Clean residual min=-0.002221 max=0.002069 Jy/beam ! Clean residual mean=0.000001 rms=0.000476 Jy/beam ! Combined flux in latest and established models = 0.125225 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 0.125225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090779Jy sigma=0.000662 ! Fit after self-cal, rms=0.090776Jy sigma=0.000662 wmodel J1720+3825_S_2017_01_16_pus_map.mod ! Writing 121 model components to file: J1720+3825_S_2017_01_16_pus_map.mod wobs J1720+3825_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1720+3825_S_2017_01_16_pus_uvs.fits wwins J1720+3825_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J1720+3825_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000436241 Jy ! Component: 100 - total flux cleaned = -0.00086801 Jy ! Component: 150 - total flux cleaned = -0.00102523 Jy ! Component: 200 - total flux cleaned = -0.00126536 Jy ! Component: 250 - total flux cleaned = -0.00143863 Jy ! Component: 300 - total flux cleaned = -0.00155091 Jy ! Component: 350 - total flux cleaned = -0.00160533 Jy ! Component: 400 - total flux cleaned = -0.0015526 Jy ! Component: 450 - total flux cleaned = -0.00157821 Jy ! Component: 500 - total flux cleaned = -0.00155177 Jy ! Component: 550 - total flux cleaned = -0.00147697 Jy ! Component: 600 - total flux cleaned = -0.00147679 Jy ! Component: 650 - total flux cleaned = -0.0013559 Jy ! Component: 700 - total flux cleaned = -0.00133186 Jy ! Component: 750 - total flux cleaned = -0.00123902 Jy ! Component: 800 - total flux cleaned = -0.00117035 Jy ! Component: 850 - total flux cleaned = -0.00110285 Jy ! Component: 900 - total flux cleaned = -0.00101461 Jy ! Component: 950 - total flux cleaned = -0.000993076 Jy ! Component: 1000 - total flux cleaned = -0.000993017 Jy ! Component: 1050 - total flux cleaned = -0.000886986 Jy ! Component: 1100 - total flux cleaned = -0.000887114 Jy ! Component: 1150 - total flux cleaned = -0.000825341 Jy ! Component: 1200 - total flux cleaned = -0.000785227 Jy ! Component: 1250 - total flux cleaned = -0.000805714 Jy ! Component: 1300 - total flux cleaned = -0.000805707 Jy ! Component: 1350 - total flux cleaned = -0.000825583 Jy ! Component: 1400 - total flux cleaned = -0.000902804 Jy ! Component: 1450 - total flux cleaned = -0.000979402 Jy ! Component: 1500 - total flux cleaned = -0.00111159 Jy ! Component: 1550 - total flux cleaned = -0.00118598 Jy ! Component: 1600 - total flux cleaned = -0.00122301 Jy ! Component: 1650 - total flux cleaned = -0.00127777 Jy ! Component: 1700 - total flux cleaned = -0.00133197 Jy ! Component: 1750 - total flux cleaned = -0.00143949 Jy ! Component: 1800 - total flux cleaned = -0.00154595 Jy ! Component: 1850 - total flux cleaned = -0.00159849 Jy ! Component: 1900 - total flux cleaned = -0.00158095 Jy ! Component: 1950 - total flux cleaned = -0.00164972 Jy ! Component: 2000 - total flux cleaned = -0.00166659 Jy ! Component: 2050 - total flux cleaned = -0.00166653 Jy ! Component: 2100 - total flux cleaned = -0.00170029 Jy ! Component: 2150 - total flux cleaned = -0.00173329 Jy ! Component: 2200 - total flux cleaned = -0.00173339 Jy ! Component: 2250 - total flux cleaned = -0.00171684 Jy ! Component: 2300 - total flux cleaned = -0.00174934 Jy ! Component: 2350 - total flux cleaned = -0.00174945 Jy ! Component: 2400 - total flux cleaned = -0.00184538 Jy ! Component: 2450 - total flux cleaned = -0.00181349 Jy ! Component: 2500 - total flux cleaned = -0.0018133 Jy ! Component: 2550 - total flux cleaned = -0.00182893 Jy ! Component: 2600 - total flux cleaned = -0.00190647 Jy ! Component: 2650 - total flux cleaned = -0.00187567 Jy ! Component: 2700 - total flux cleaned = -0.00190626 Jy ! Component: 2750 - total flux cleaned = -0.00196684 Jy ! Component: 2800 - total flux cleaned = -0.00202717 Jy ! Component: 2850 - total flux cleaned = -0.002042 Jy ! Component: 2900 - total flux cleaned = -0.00207155 Jy ! Component: 2950 - total flux cleaned = -0.00208625 Jy ! Component: 3000 - total flux cleaned = -0.00210085 Jy ! Component: 3050 - total flux cleaned = -0.00210074 Jy ! Component: 3100 - total flux cleaned = -0.00208637 Jy ! Component: 3150 - total flux cleaned = -0.002072 Jy ! Component: 3200 - total flux cleaned = -0.00211489 Jy ! Component: 3250 - total flux cleaned = -0.00217148 Jy ! Component: 3300 - total flux cleaned = -0.0021573 Jy ! Component: 3350 - total flux cleaned = -0.00217126 Jy ! Component: 3400 - total flux cleaned = -0.00214341 Jy ! Component: 3450 - total flux cleaned = -0.0021711 Jy ! Component: 3500 - total flux cleaned = -0.00219875 Jy ! Component: 3550 - total flux cleaned = -0.00225333 Jy ! Component: 3600 - total flux cleaned = -0.00228045 Jy ! Component: 3650 - total flux cleaned = -0.00225327 Jy ! Component: 3700 - total flux cleaned = -0.00228014 Jy ! Component: 3750 - total flux cleaned = -0.00229358 Jy ! Component: 3800 - total flux cleaned = -0.00233333 Jy ! Component: 3850 - total flux cleaned = -0.00234658 Jy ! Component: 3900 - total flux cleaned = -0.00235969 Jy ! Component: 3950 - total flux cleaned = -0.00238583 Jy ! Component: 4000 - total flux cleaned = -0.00235982 Jy ! Component: 4050 - total flux cleaned = -0.00239867 Jy ! Total flux subtracted in 4096 components = -0.00241149 Jy ! Clean residual min=-0.000702 max=0.000941 Jy/beam ! Clean residual mean=0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.122814 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 399 components and 0.122814 Jy ![Exited script file: muppet] wmap "J1720+3825_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.25 x 7.201 at 14.51 degrees (North through East) ! Clean map min=-0.0017166 max=0.11269 Jy/beam ! Writing clean map to FITS file: J1720+3825_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112689 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00023796 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.633495 0.633495 1.26699 2.53398 5.06796 10.1359 20.2719 40.5437 81.0874 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.25 x 7.201 at 14.51 degrees (North through East) ! Clean map min=-0.0017166 max=0.11269 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1720+3825_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:19:15 2019