! Started logfile: J1719+4858_S_2017_05_01_pus_uvs.log on Wed May 1 18:41:08 2019 obs J1719+4858_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1719+4858_S_2017_05_01_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.842262 visibilities/baseline/integration-bin. ! Found source: J1719+4858 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 16980 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1719+4858_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 91 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 557 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977369Jy sigma=0.016911 ! Fit after self-cal, rms=0.952313Jy sigma=0.016812 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=4.899 mas, bpa=-8.461 degrees ! Estimated noise=1147.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377325 Jy ! Component: 100 - total flux cleaned = 0.0459703 Jy ! Total flux subtracted in 100 components = 0.0459703 Jy ! Clean residual min=-0.004203 max=0.004912 Jy/beam ! Clean residual mean=-0.000002 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.0459703 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0459703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086719Jy sigma=0.000926 ! Fit after self-cal, rms=0.086387Jy sigma=0.000919 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=5.853 mas, bpa=-7.866 degrees ! Estimated noise=656.223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058481 Jy ! Component: 100 - total flux cleaned = -0.000860661 Jy ! Component: 150 - total flux cleaned = -0.0010456 Jy ! Component: 200 - total flux cleaned = -0.00116169 Jy ! Total flux subtracted in 200 components = -0.00116169 Jy ! Clean residual min=-0.004207 max=0.004998 Jy/beam ! Clean residual mean=-0.000020 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.0448086 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.0448086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086353Jy sigma=0.000910 ! Fit after self-cal, rms=0.086299Jy sigma=0.000910 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.81 HN 1.09 KP 1.01 ! LA 0.91 MK 1.05 NL 0.95 OV 1.17 ! PT 0.95 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.90 HN 1.04 KP 1.04 ! LA 0.91 MK 0.99 NL 0.95 OV 1.04 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.92 HN 1.11 KP 1.01 ! LA 0.92 MK 0.96 NL 0.99 OV 1.01 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.79 HN 0.91 KP 1.00* ! LA 21.75 MK 0.79 NL 1.00* OV 1.00* ! PT 0.88 SC 1.00* ! ! ! Fit before self-cal, rms=0.086299Jy sigma=0.000910 ! Fit after self-cal, rms=0.606201Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=5.672 mas, bpa=-6.136 degrees ! Estimated noise=672.819 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442988 Jy ! Component: 100 - total flux cleaned = 0.00701549 Jy ! Component: 150 - total flux cleaned = 0.00885921 Jy ! Component: 200 - total flux cleaned = 0.0102043 Jy ! Total flux subtracted in 200 components = 0.0102043 Jy ! Clean residual min=-0.002157 max=0.002051 Jy/beam ! Clean residual mean=0.000009 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0550129 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 41 components and 0.0550129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.605918Jy sigma=0.000654 ! Fit after self-cal, rms=0.606542Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.606542Jy sigma=0.000652 ! Fit after self-cal, rms=0.725629Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=5.627 mas, bpa=-6.381 degrees ! Estimated noise=671.998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023912 Jy ! Component: 100 - total flux cleaned = 0.00373792 Jy ! Component: 150 - total flux cleaned = 0.00469375 Jy ! Component: 200 - total flux cleaned = 0.00542646 Jy ! Total flux subtracted in 200 components = 0.00542646 Jy ! Clean residual min=-0.001810 max=0.001799 Jy/beam ! Clean residual mean=0.000016 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0604394 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 68 components and 0.0604394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.725506Jy sigma=0.000649 ! Fit after self-cal, rms=0.725566Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147358 Jy ! Component: 100 - total flux cleaned = 0.00234132 Jy ! Component: 150 - total flux cleaned = 0.0029693 Jy ! Component: 200 - total flux cleaned = 0.00318528 Jy ! Total flux subtracted in 200 components = 0.00318528 Jy ! Clean residual min=-0.001791 max=0.001813 Jy/beam ! Clean residual mean=0.000014 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0636246 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 83 components and 0.0636246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.725489Jy sigma=0.000648 ! Fit after self-cal, rms=0.725538Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.725538Jy sigma=0.000648 ! Fit after self-cal, rms=0.691884Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.771 mas, bmaj=5.619 mas, bpa=-6.503 degrees ! Estimated noise=673.636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102233 Jy ! Component: 100 - total flux cleaned = 0.00128337 Jy ! Component: 150 - total flux cleaned = 0.00145496 Jy ! Component: 200 - total flux cleaned = 0.00162024 Jy ! Total flux subtracted in 200 components = 0.00162024 Jy ! Clean residual min=-0.001737 max=0.001674 Jy/beam ! Clean residual mean=0.000005 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0652449 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 0.0652449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.691841Jy sigma=0.000646 ! Fit after self-cal, rms=0.691838Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000571577 Jy ! Component: 100 - total flux cleaned = 0.000769192 Jy ! Component: 150 - total flux cleaned = 0.000853511 Jy ! Component: 200 - total flux cleaned = 0.000928768 Jy ! Total flux subtracted in 200 components = 0.000928768 Jy ! Clean residual min=-0.001760 max=0.001649 Jy/beam ! Clean residual mean=0.000006 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0661737 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 0.0661737 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.691820Jy sigma=0.000646 ! Fit after self-cal, rms=0.691821Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.691821Jy sigma=0.000646 ! Fit after self-cal, rms=0.722257Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.144 mas, bmaj=9.736 mas, bpa=-6.783 degrees ! Estimated noise=818.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105875 Jy ! Component: 100 - total flux cleaned = 0.00169671 Jy ! Component: 150 - total flux cleaned = 0.00211507 Jy ! Component: 200 - total flux cleaned = 0.00221471 Jy ! Total flux subtracted in 200 components = 0.00221471 Jy ! Clean residual min=-0.001765 max=0.001705 Jy/beam ! Clean residual mean=0.000009 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0683884 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.0683884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.722211Jy sigma=0.000646 ! Fit after self-cal, rms=0.722211Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367044 Jy ! Component: 100 - total flux cleaned = 0.000511093 Jy ! Component: 150 - total flux cleaned = 0.000582306 Jy ! Component: 200 - total flux cleaned = 0.000612552 Jy ! Total flux subtracted in 200 components = 0.000612552 Jy ! Clean residual min=-0.001755 max=0.001650 Jy/beam ! Clean residual mean=0.000010 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0690009 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 108 components and 0.0690009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.722199Jy sigma=0.000646 ! Fit after self-cal, rms=0.722195Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=5.606 mas, bpa=-6.44 degrees ! Estimated noise=676.929 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 5.606 at -6.44 degrees (North through East) ! Clean map min=-0.0015834 max=0.048397 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=4.749 mas, bpa=-7.736 degrees ! Estimated noise=1134.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373617 Jy ! Component: 100 - total flux cleaned = 0.046754 Jy ! Component: 150 - total flux cleaned = 0.0521667 Jy ! Component: 200 - total flux cleaned = 0.056035 Jy ! Total flux subtracted in 200 components = 0.056035 Jy ! Clean residual min=-0.003360 max=0.003093 Jy/beam ! Clean residual mean=0.000006 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.056035 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.056035 Jy ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=5.606 mas, bpa=-6.44 degrees ! Estimated noise=676.929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414162 Jy ! Component: 100 - total flux cleaned = 0.0067898 Jy ! Component: 150 - total flux cleaned = 0.00867707 Jy ! Component: 200 - total flux cleaned = 0.00989855 Jy ! Total flux subtracted in 200 components = 0.00989855 Jy ! Clean residual min=-0.001727 max=0.001744 Jy/beam ! Clean residual mean=0.000005 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0659335 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 54 components and 0.0659335 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.144 mas, bmaj=9.736 mas, bpa=-6.783 degrees ! Estimated noise=818.344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172718 Jy ! Component: 100 - total flux cleaned = 0.00256816 Jy ! Component: 150 - total flux cleaned = 0.00292372 Jy ! Component: 200 - total flux cleaned = 0.00322596 Jy ! Total flux subtracted in 200 components = 0.00322596 Jy ! Clean residual min=-0.001852 max=0.001577 Jy/beam ! Clean residual mean=0.000011 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.0691595 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198676 Jy ! Component: 100 - total flux cleaned = 0.000263469 Jy ! Component: 150 - total flux cleaned = 0.000292172 Jy ! Component: 200 - total flux cleaned = 0.000342691 Jy ! Total flux subtracted in 200 components = 0.000342691 Jy ! Clean residual min=-0.001784 max=0.001557 Jy/beam ! Clean residual mean=0.000011 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0695022 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 76 components and 0.0695022 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=5.606 mas, bpa=-6.44 degrees ! Estimated noise=676.929 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.95864e-06 Jy ! Component: 100 - total flux cleaned = -6.84514e-05 Jy ! Component: 150 - total flux cleaned = -0.000159229 Jy ! Component: 200 - total flux cleaned = -0.000221738 Jy ! Total flux subtracted in 200 components = -0.000221738 Jy ! Clean residual min=-0.001626 max=0.001680 Jy/beam ! Clean residual mean=0.000005 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0692804 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.0692804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.722176Jy sigma=0.000646 ! Fit after self-cal, rms=0.722179Jy sigma=0.000646 wmodel J1719+4858_S_2017_05_01_pus_map.mod ! Writing 89 model components to file: J1719+4858_S_2017_05_01_pus_map.mod wobs J1719+4858_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1719+4858_S_2017_05_01_pus_uvs.fits wwins J1719+4858_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J1719+4858_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165359 Jy ! Component: 100 - total flux cleaned = -7.97753e-05 Jy ! Component: 150 - total flux cleaned = -0.00010691 Jy ! Component: 200 - total flux cleaned = -0.000106424 Jy ! Component: 250 - total flux cleaned = -5.71736e-06 Jy ! Component: 300 - total flux cleaned = 6.84016e-05 Jy ! Component: 350 - total flux cleaned = 0.000284388 Jy ! Component: 400 - total flux cleaned = 0.000471657 Jy ! Component: 450 - total flux cleaned = 0.000677995 Jy ! Component: 500 - total flux cleaned = 0.000812538 Jy ! Component: 550 - total flux cleaned = 0.000945522 Jy ! Component: 600 - total flux cleaned = 0.00116271 Jy ! Component: 650 - total flux cleaned = 0.00126878 Jy ! Component: 700 - total flux cleaned = 0.00135283 Jy ! Component: 750 - total flux cleaned = 0.00151809 Jy ! Component: 800 - total flux cleaned = 0.00159952 Jy ! Component: 850 - total flux cleaned = 0.00175967 Jy ! Component: 900 - total flux cleaned = 0.00187798 Jy ! Component: 950 - total flux cleaned = 0.00199438 Jy ! Component: 1000 - total flux cleaned = 0.00212858 Jy ! Component: 1050 - total flux cleaned = 0.00222341 Jy ! Component: 1100 - total flux cleaned = 0.00240963 Jy ! Component: 1150 - total flux cleaned = 0.00253819 Jy ! Component: 1200 - total flux cleaned = 0.00270118 Jy ! Component: 1250 - total flux cleaned = 0.00282663 Jy ! Component: 1300 - total flux cleaned = 0.00291509 Jy ! Component: 1350 - total flux cleaned = 0.00305483 Jy ! Component: 1400 - total flux cleaned = 0.00322762 Jy ! Component: 1450 - total flux cleaned = 0.00329595 Jy ! Component: 1500 - total flux cleaned = 0.00338044 Jy ! Component: 1550 - total flux cleaned = 0.00351417 Jy ! Component: 1600 - total flux cleaned = 0.00354746 Jy ! Component: 1650 - total flux cleaned = 0.00371125 Jy ! Component: 1700 - total flux cleaned = 0.00375971 Jy ! Component: 1750 - total flux cleaned = 0.00380784 Jy ! Component: 1800 - total flux cleaned = 0.00390325 Jy ! Component: 1850 - total flux cleaned = 0.0039352 Jy ! Component: 1900 - total flux cleaned = 0.0039978 Jy ! Component: 1950 - total flux cleaned = 0.00409049 Jy ! Component: 2000 - total flux cleaned = 0.00415194 Jy ! Component: 2050 - total flux cleaned = 0.00427339 Jy ! Component: 2100 - total flux cleaned = 0.00434864 Jy ! Component: 2150 - total flux cleaned = 0.00437843 Jy ! Component: 2200 - total flux cleaned = 0.00437844 Jy ! Component: 2250 - total flux cleaned = 0.00442262 Jy ! Component: 2300 - total flux cleaned = 0.00449527 Jy ! Component: 2350 - total flux cleaned = 0.00450973 Jy ! Component: 2400 - total flux cleaned = 0.00448116 Jy ! Component: 2450 - total flux cleaned = 0.00460919 Jy ! Component: 2500 - total flux cleaned = 0.00465147 Jy ! Component: 2550 - total flux cleaned = 0.00465141 Jy ! Component: 2600 - total flux cleaned = 0.00463754 Jy ! Component: 2650 - total flux cleaned = 0.00476175 Jy ! Component: 2700 - total flux cleaned = 0.00469317 Jy ! Component: 2750 - total flux cleaned = 0.0048021 Jy ! Component: 2800 - total flux cleaned = 0.0048155 Jy ! Component: 2850 - total flux cleaned = 0.00480218 Jy ! Component: 2900 - total flux cleaned = 0.00490873 Jy ! Component: 2950 - total flux cleaned = 0.00493523 Jy ! Component: 3000 - total flux cleaned = 0.00494853 Jy ! Component: 3050 - total flux cleaned = 0.00497473 Jy ! Component: 3100 - total flux cleaned = 0.00502673 Jy ! Component: 3150 - total flux cleaned = 0.00506549 Jy ! Component: 3200 - total flux cleaned = 0.00511671 Jy ! Component: 3250 - total flux cleaned = 0.00514217 Jy ! Component: 3300 - total flux cleaned = 0.00518008 Jy ! Component: 3350 - total flux cleaned = 0.00515499 Jy ! Component: 3400 - total flux cleaned = 0.00519259 Jy ! Component: 3450 - total flux cleaned = 0.00520503 Jy ! Component: 3500 - total flux cleaned = 0.00521736 Jy ! Component: 3550 - total flux cleaned = 0.00521731 Jy ! Component: 3600 - total flux cleaned = 0.00521739 Jy ! Component: 3650 - total flux cleaned = 0.00522951 Jy ! Component: 3700 - total flux cleaned = 0.00522952 Jy ! Component: 3750 - total flux cleaned = 0.00520561 Jy ! Component: 3800 - total flux cleaned = 0.00521746 Jy ! Component: 3850 - total flux cleaned = 0.00520562 Jy ! Component: 3900 - total flux cleaned = 0.00521729 Jy ! Component: 3950 - total flux cleaned = 0.00519384 Jy ! Component: 4000 - total flux cleaned = 0.00519377 Jy ! Component: 4050 - total flux cleaned = 0.00519379 Jy ! Total flux subtracted in 4096 components = 0.0051476 Jy ! Clean residual min=-0.000701 max=0.000680 Jy/beam ! Clean residual mean=-0.000001 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.0744281 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 398 components and 0.074428 Jy ![Exited script file: muppet] wmap "J1719+4858_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 5.606 at -6.44 degrees (North through East) ! Clean map min=-0.0012015 max=0.048123 Jy/beam ! Writing clean map to FITS file: J1719+4858_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0481234 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00020983 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30807 1.30807 2.61615 5.2323 10.4646 20.9292 41.8584 83.7168 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.767 x 5.606 at -6.44 degrees (North through East) ! Clean map min=-0.0012015 max=0.048123 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1719+4858_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:41:13 2019