! Started logfile: J1719+4804_S_2017_05_01_pus_uvs.log on Wed May 1 18:41:04 2019 obs J1719+4804_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1719+4804_S_2017_05_01_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.908577 visibilities/baseline/integration-bin. ! Found source: J1719+4804 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 18644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1719+4804_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 534 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.917948Jy sigma=0.008186 ! Fit after self-cal, rms=0.910376Jy sigma=0.008132 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=4.81 mas, bpa=-9.572 degrees ! Estimated noise=1074.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0702901 Jy ! Component: 100 - total flux cleaned = 0.0858637 Jy ! Total flux subtracted in 100 components = 0.0858637 Jy ! Clean residual min=-0.004211 max=0.005046 Jy/beam ! Clean residual mean=0.000006 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.0858637 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0858637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105632Jy sigma=0.000677 ! Fit after self-cal, rms=0.105660Jy sigma=0.000677 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=5.774 mas, bpa=-5.853 degrees ! Estimated noise=656.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572955 Jy ! Component: 100 - total flux cleaned = 0.0079755 Jy ! Component: 150 - total flux cleaned = 0.00887782 Jy ! Component: 200 - total flux cleaned = 0.00903095 Jy ! Total flux subtracted in 200 components = 0.00903095 Jy ! Clean residual min=-0.002674 max=0.003406 Jy/beam ! Clean residual mean=0.000012 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.0948947 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.0948947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105093Jy sigma=0.000675 ! Fit after self-cal, rms=0.105108Jy sigma=0.000675 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.92 HN 1.07 KP 1.00 ! LA 1.01 MK 1.00 NL 0.92 OV 1.09 ! PT 1.02 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.10 KP 0.95 ! LA 0.99 MK 1.02 NL 0.93 OV 1.33 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.09 KP 1.01 ! LA 1.00 MK 0.97 NL 1.01 OV 1.00 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.93 HN 1.04 KP 1.00* ! LA 0.85 MK 1.16 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.105108Jy sigma=0.000675 ! Fit after self-cal, rms=0.099500Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.777 mas, bmaj=5.748 mas, bpa=-5.55 degrees ! Estimated noise=661.064 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000637102 Jy ! Component: 100 - total flux cleaned = 0.000705276 Jy ! Component: 150 - total flux cleaned = 0.000668901 Jy ! Component: 200 - total flux cleaned = 0.000653377 Jy ! Total flux subtracted in 200 components = 0.000653377 Jy ! Clean residual min=-0.002584 max=0.002402 Jy/beam ! Clean residual mean=0.000013 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.095548 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.095548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099463Jy sigma=0.000669 ! Fit after self-cal, rms=0.099461Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099461Jy sigma=0.000669 ! Fit after self-cal, rms=0.083408Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=5.747 mas, bpa=-5.543 degrees ! Estimated noise=661.526 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167997 Jy ! Component: 100 - total flux cleaned = -0.000167078 Jy ! Component: 150 - total flux cleaned = -0.000150897 Jy ! Component: 200 - total flux cleaned = -0.000136634 Jy ! Total flux subtracted in 200 components = -0.000136634 Jy ! Clean residual min=-0.001778 max=0.001844 Jy/beam ! Clean residual mean=0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0954114 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0954114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083399Jy sigma=0.000665 ! Fit after self-cal, rms=0.083249Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-50, 65.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142456 Jy ! Component: 100 - total flux cleaned = 0.00151338 Jy ! Component: 150 - total flux cleaned = 0.00151343 Jy ! Component: 200 - total flux cleaned = 0.00153715 Jy ! Total flux subtracted in 200 components = 0.00153715 Jy ! Clean residual min=-0.001695 max=0.001646 Jy/beam ! Clean residual mean=0.000004 rms=0.000408 Jy/beam ! Combined flux in latest and established models = 0.0969485 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.0969485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083210Jy sigma=0.000665 ! Fit after self-cal, rms=0.083203Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083203Jy sigma=0.000665 ! Fit after self-cal, rms=0.082527Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=5.743 mas, bpa=-5.427 degrees ! Estimated noise=661.502 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000374643 Jy ! Component: 100 - total flux cleaned = 0.000373617 Jy ! Component: 150 - total flux cleaned = 0.000394995 Jy ! Component: 200 - total flux cleaned = 0.000394889 Jy ! Total flux subtracted in 200 components = 0.000394889 Jy ! Clean residual min=-0.001696 max=0.001621 Jy/beam ! Clean residual mean=0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0973434 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.0973434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082512Jy sigma=0.000665 ! Fit after self-cal, rms=0.082491Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.46832e-05 Jy ! Component: 100 - total flux cleaned = 9.50057e-05 Jy ! Component: 150 - total flux cleaned = 0.000114083 Jy ! Component: 200 - total flux cleaned = 0.000114863 Jy ! Total flux subtracted in 200 components = 0.000114863 Jy ! Clean residual min=-0.001717 max=0.001623 Jy/beam ! Clean residual mean=0.000003 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0974583 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.0974583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082481Jy sigma=0.000665 ! Fit after self-cal, rms=0.082480Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082480Jy sigma=0.000665 ! Fit after self-cal, rms=0.082356Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.061 mas, bmaj=9.439 mas, bpa=3.188 degrees ! Estimated noise=792.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359395 Jy ! Component: 100 - total flux cleaned = -0.000505432 Jy ! Component: 150 - total flux cleaned = -0.000554004 Jy ! Component: 200 - total flux cleaned = -0.000583932 Jy ! Total flux subtracted in 200 components = -0.000583932 Jy ! Clean residual min=-0.001617 max=0.001906 Jy/beam ! Clean residual mean=0.000005 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0968744 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.0968744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082356Jy sigma=0.000664 ! Fit after self-cal, rms=0.082350Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (97.5, -98.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179911 Jy ! Component: 100 - total flux cleaned = 0.00264717 Jy ! Component: 150 - total flux cleaned = 0.00292105 Jy ! Component: 200 - total flux cleaned = 0.00309912 Jy ! Total flux subtracted in 200 components = 0.00309912 Jy ! Clean residual min=-0.001396 max=0.001325 Jy/beam ! Clean residual mean=-0.000000 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0999735 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 99 components and 0.0999735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082315Jy sigma=0.000664 ! Fit after self-cal, rms=0.082307Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.792 mas, bmaj=5.742 mas, bpa=-5.448 degrees ! Estimated noise=661.576 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.792 x 5.742 at -5.448 degrees (North through East) ! Clean map min=-0.0015605 max=0.092156 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.089 mas, bmaj=4.782 mas, bpa=-9.218 degrees ! Estimated noise=1084.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0708442 Jy ! Component: 100 - total flux cleaned = 0.086656 Jy ! Component: 150 - total flux cleaned = 0.0921104 Jy ! Component: 200 - total flux cleaned = 0.0957053 Jy ! Total flux subtracted in 200 components = 0.0957053 Jy ! Clean residual min=-0.003334 max=0.003125 Jy/beam ! Clean residual mean=0.000000 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.0957053 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.0957053 Jy ! Inverting map and beam ! Estimated beam: bmin=3.792 mas, bmaj=5.742 mas, bpa=-5.448 degrees ! Estimated noise=661.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026036 Jy ! Component: 100 - total flux cleaned = 0.00421514 Jy ! Component: 150 - total flux cleaned = 0.00511595 Jy ! Component: 200 - total flux cleaned = 0.00567738 Jy ! Total flux subtracted in 200 components = 0.00567738 Jy ! Clean residual min=-0.001787 max=0.001535 Jy/beam ! Clean residual mean=-0.000002 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.101383 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 41 components and 0.101383 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.061 mas, bmaj=9.439 mas, bpa=3.188 degrees ! Estimated noise=792.999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141412 Jy ! Component: 100 - total flux cleaned = 8.8507e-05 Jy ! Component: 150 - total flux cleaned = 8.84794e-05 Jy ! Component: 200 - total flux cleaned = 8.82458e-05 Jy ! Total flux subtracted in 200 components = 8.82458e-05 Jy ! Clean residual min=-0.001360 max=0.001320 Jy/beam ! Clean residual mean=-0.000003 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.101471 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.96266e-05 Jy ! Component: 100 - total flux cleaned = -3.79455e-05 Jy ! Component: 150 - total flux cleaned = -7.1684e-05 Jy ! Component: 200 - total flux cleaned = -8.77924e-05 Jy ! Total flux subtracted in 200 components = -8.77924e-05 Jy ! Clean residual min=-0.001365 max=0.001285 Jy/beam ! Clean residual mean=-0.000002 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.101383 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 72 components and 0.101383 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.792 mas, bmaj=5.742 mas, bpa=-5.448 degrees ! Estimated noise=661.576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000432438 Jy ! Component: 100 - total flux cleaned = 0.000603993 Jy ! Component: 150 - total flux cleaned = 0.000702152 Jy ! Component: 200 - total flux cleaned = 0.000825258 Jy ! Total flux subtracted in 200 components = 0.000825258 Jy ! Clean residual min=-0.001733 max=0.001463 Jy/beam ! Clean residual mean=-0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.102208 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 88 components and 0.102208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082290Jy sigma=0.000664 ! Fit after self-cal, rms=0.082281Jy sigma=0.000664 wmodel J1719+4804_S_2017_05_01_pus_map.mod ! Writing 88 model components to file: J1719+4804_S_2017_05_01_pus_map.mod wobs J1719+4804_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1719+4804_S_2017_05_01_pus_uvs.fits wwins J1719+4804_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J1719+4804_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000604212 Jy ! Component: 100 - total flux cleaned = -0.00104336 Jy ! Component: 150 - total flux cleaned = -0.00125323 Jy ! Component: 200 - total flux cleaned = -0.00130347 Jy ! Component: 250 - total flux cleaned = -0.00137739 Jy ! Component: 300 - total flux cleaned = -0.00149663 Jy ! Component: 350 - total flux cleaned = -0.00168196 Jy ! Component: 400 - total flux cleaned = -0.0017953 Jy ! Component: 450 - total flux cleaned = -0.00197333 Jy ! Component: 500 - total flux cleaned = -0.00210392 Jy ! Component: 550 - total flux cleaned = -0.0022747 Jy ! Component: 600 - total flux cleaned = -0.00237967 Jy ! Component: 650 - total flux cleaned = -0.00252505 Jy ! Component: 700 - total flux cleaned = -0.00262717 Jy ! Component: 750 - total flux cleaned = -0.00274774 Jy ! Component: 800 - total flux cleaned = -0.00278731 Jy ! Component: 850 - total flux cleaned = -0.00284622 Jy ! Component: 900 - total flux cleaned = -0.00294322 Jy ! Component: 950 - total flux cleaned = -0.00303872 Jy ! Component: 1000 - total flux cleaned = -0.00305754 Jy ! Component: 1050 - total flux cleaned = -0.00305795 Jy ! Component: 1100 - total flux cleaned = -0.0031135 Jy ! Component: 1150 - total flux cleaned = -0.00315011 Jy ! Component: 1200 - total flux cleaned = -0.003168 Jy ! Component: 1250 - total flux cleaned = -0.00318599 Jy ! Component: 1300 - total flux cleaned = -0.00330916 Jy ! Component: 1350 - total flux cleaned = -0.00332647 Jy ! Component: 1400 - total flux cleaned = -0.00334368 Jy ! Component: 1450 - total flux cleaned = -0.00336095 Jy ! Component: 1500 - total flux cleaned = -0.00341155 Jy ! Component: 1550 - total flux cleaned = -0.00344513 Jy ! Component: 1600 - total flux cleaned = -0.00346189 Jy ! Component: 1650 - total flux cleaned = -0.00349492 Jy ! Component: 1700 - total flux cleaned = -0.00351132 Jy ! Component: 1750 - total flux cleaned = -0.00354346 Jy ! Component: 1800 - total flux cleaned = -0.00352756 Jy ! Component: 1850 - total flux cleaned = -0.00357513 Jy ! Component: 1900 - total flux cleaned = -0.00354357 Jy ! Component: 1950 - total flux cleaned = -0.00360598 Jy ! Component: 2000 - total flux cleaned = -0.00352842 Jy ! Component: 2050 - total flux cleaned = -0.00351314 Jy ! Component: 2100 - total flux cleaned = -0.00355883 Jy ! Component: 2150 - total flux cleaned = -0.00358913 Jy ! Component: 2200 - total flux cleaned = -0.003634 Jy ! Component: 2250 - total flux cleaned = -0.00366373 Jy ! Component: 2300 - total flux cleaned = -0.00366348 Jy ! Component: 2350 - total flux cleaned = -0.0037073 Jy ! Component: 2400 - total flux cleaned = -0.00373659 Jy ! Component: 2450 - total flux cleaned = -0.00372201 Jy ! Component: 2500 - total flux cleaned = -0.00376507 Jy ! Component: 2550 - total flux cleaned = -0.00377937 Jy ! Component: 2600 - total flux cleaned = -0.00372288 Jy ! Component: 2650 - total flux cleaned = -0.0037229 Jy ! Component: 2700 - total flux cleaned = -0.00369517 Jy ! Component: 2750 - total flux cleaned = -0.00372298 Jy ! Component: 2800 - total flux cleaned = -0.00370924 Jy ! Component: 2850 - total flux cleaned = -0.00369558 Jy ! Component: 2900 - total flux cleaned = -0.00361428 Jy ! Component: 2950 - total flux cleaned = -0.00366815 Jy ! Component: 3000 - total flux cleaned = -0.00357437 Jy ! Component: 3050 - total flux cleaned = -0.00356106 Jy ! Component: 3100 - total flux cleaned = -0.00353454 Jy ! Component: 3150 - total flux cleaned = -0.00350815 Jy ! Component: 3200 - total flux cleaned = -0.00340403 Jy ! Component: 3250 - total flux cleaned = -0.00342981 Jy ! Component: 3300 - total flux cleaned = -0.00332683 Jy ! Component: 3350 - total flux cleaned = -0.00327551 Jy ! Component: 3400 - total flux cleaned = -0.00325012 Jy ! Component: 3450 - total flux cleaned = -0.00323748 Jy ! Component: 3500 - total flux cleaned = -0.00316222 Jy ! Component: 3550 - total flux cleaned = -0.00314985 Jy ! Component: 3600 - total flux cleaned = -0.00316229 Jy ! Component: 3650 - total flux cleaned = -0.00311311 Jy ! Component: 3700 - total flux cleaned = -0.00314993 Jy ! Component: 3750 - total flux cleaned = -0.00316205 Jy ! Component: 3800 - total flux cleaned = -0.00304064 Jy ! Component: 3850 - total flux cleaned = -0.00307686 Jy ! Component: 3900 - total flux cleaned = -0.00305279 Jy ! Component: 3950 - total flux cleaned = -0.00301701 Jy ! Component: 4000 - total flux cleaned = -0.00299327 Jy ! Component: 4050 - total flux cleaned = -0.00302871 Jy ! Total flux subtracted in 4096 components = -0.00299353 Jy ! Clean residual min=-0.000658 max=0.000676 Jy/beam ! Clean residual mean=0.000001 rms=0.000210 Jy/beam ! Combined flux in latest and established models = 0.0992149 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 365 components and 0.0992149 Jy ![Exited script file: muppet] wmap "J1719+4804_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.792 x 5.742 at -5.448 degrees (North through East) ! Clean map min=-0.0012207 max=0.09188 Jy/beam ! Writing clean map to FITS file: J1719+4804_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0918802 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000209186 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.683019 0.683019 1.36604 2.73207 5.46415 10.9283 21.8566 43.7132 87.4264 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.792 x 5.742 at -5.448 degrees (North through East) ! Clean map min=-0.0012207 max=0.09188 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1719+4804_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:41:08 2019