! Started logfile: J1717+1917_S_2017_03_23_pus_uvs.log on Mon May 13 10:05:37 2019 obs J1717+1917_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J1717+1917_S_2017_03_23_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.819048 visibilities/baseline/integration-bin. ! Found source: J1717+1917 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 12384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1717+1917_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 301 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.831705Jy sigma=0.007262 ! Fit after self-cal, rms=0.821318Jy sigma=0.007186 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=7.903 mas, bpa=-11.91 degrees ! Estimated noise=1121.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139968 Jy ! Component: 100 - total flux cleaned = 0.170856 Jy ! Total flux subtracted in 100 components = 0.170856 Jy ! Clean residual min=-0.007530 max=0.010070 Jy/beam ! Clean residual mean=-0.000007 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.170856 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.170856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093859Jy sigma=0.000724 ! Fit after self-cal, rms=0.093863Jy sigma=0.000724 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=8.578 mas, bpa=-9.709 degrees ! Estimated noise=799.086 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127441 Jy ! Component: 100 - total flux cleaned = 0.0189553 Jy ! Component: 150 - total flux cleaned = 0.0226129 Jy ! Component: 200 - total flux cleaned = 0.0249276 Jy ! Total flux subtracted in 200 components = 0.0249276 Jy ! Clean residual min=-0.004683 max=0.004970 Jy/beam ! Clean residual mean=-0.000008 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.195784 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 43 components and 0.195784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092027Jy sigma=0.000709 ! Fit after self-cal, rms=0.092049Jy sigma=0.000709 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.93 KP 1.03 ! LA 0.99 MK 1.03 NL 0.87 OV 1.02 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.03 HN 0.97 KP 0.99 ! LA 0.97 MK 1.02 NL 1.05 OV 1.05 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.04 HN 0.94 KP 0.88 ! LA 0.75 MK 1.04 NL 1.17 OV 0.96 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.04 HN 0.90 KP 1.00* ! LA 0.76 MK 1.32 NL 1.00* OV 2.10 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.092049Jy sigma=0.000709 ! Fit after self-cal, rms=0.091502Jy sigma=0.000665 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=8.655 mas, bpa=-9.479 degrees ! Estimated noise=801.681 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124046 Jy ! Component: 100 - total flux cleaned = -0.0013429 Jy ! Component: 150 - total flux cleaned = -0.00145304 Jy ! Component: 200 - total flux cleaned = -0.00152343 Jy ! Total flux subtracted in 200 components = -0.00152343 Jy ! Clean residual min=-0.002358 max=0.002371 Jy/beam ! Clean residual mean=0.000004 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.19426 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.19426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091472Jy sigma=0.000665 ! Fit after self-cal, rms=0.091752Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091752Jy sigma=0.000664 ! Fit after self-cal, rms=0.100473Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.581 mas, bmaj=8.677 mas, bpa=-9.528 degrees ! Estimated noise=802.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000559051 Jy ! Component: 100 - total flux cleaned = -0.000600769 Jy ! Component: 150 - total flux cleaned = -0.000618767 Jy ! Component: 200 - total flux cleaned = -0.000669879 Jy ! Total flux subtracted in 200 components = -0.000669879 Jy ! Clean residual min=-0.002152 max=0.001878 Jy/beam ! Clean residual mean=0.000003 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.193591 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.19359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100461Jy sigma=0.000659 ! Fit after self-cal, rms=0.100567Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.48884e-05 Jy ! Component: 100 - total flux cleaned = -4.12051e-05 Jy ! Component: 150 - total flux cleaned = -8.35145e-05 Jy ! Component: 200 - total flux cleaned = -9.68897e-05 Jy ! Total flux subtracted in 200 components = -9.68897e-05 Jy ! Clean residual min=-0.002143 max=0.001880 Jy/beam ! Clean residual mean=0.000003 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.193494 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 0.193494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100560Jy sigma=0.000659 ! Fit after self-cal, rms=0.100559Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100559Jy sigma=0.000659 ! Fit after self-cal, rms=0.101191Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.585 mas, bmaj=8.689 mas, bpa=-9.52 degrees ! Estimated noise=802.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000480908 Jy ! Component: 100 - total flux cleaned = -0.00054379 Jy ! Component: 150 - total flux cleaned = -0.000571441 Jy ! Component: 200 - total flux cleaned = -0.000584517 Jy ! Total flux subtracted in 200 components = -0.000584517 Jy ! Clean residual min=-0.002129 max=0.001878 Jy/beam ! Clean residual mean=0.000003 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.192909 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.192909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101184Jy sigma=0.000659 ! Fit after self-cal, rms=0.101185Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.42951e-05 Jy ! Component: 100 - total flux cleaned = -6.98873e-05 Jy ! Component: 150 - total flux cleaned = -9.16679e-05 Jy ! Component: 200 - total flux cleaned = -0.000102068 Jy ! Total flux subtracted in 200 components = -0.000102068 Jy ! Clean residual min=-0.002121 max=0.001886 Jy/beam ! Clean residual mean=0.000003 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.192807 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.192807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101180Jy sigma=0.000659 ! Fit after self-cal, rms=0.101179Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101179Jy sigma=0.000659 ! Fit after self-cal, rms=0.101344Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.398 mas, bmaj=11.13 mas, bpa=-7.975 degrees ! Estimated noise=939.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423539 Jy ! Component: 100 - total flux cleaned = -0.000485416 Jy ! Component: 150 - total flux cleaned = -0.000514215 Jy ! Component: 200 - total flux cleaned = -0.000530366 Jy ! Total flux subtracted in 200 components = -0.000530366 Jy ! Clean residual min=-0.002078 max=0.002278 Jy/beam ! Clean residual mean=0.000004 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.192277 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.192277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101341Jy sigma=0.000659 ! Fit after self-cal, rms=0.101341Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.13148e-06 Jy ! Component: 100 - total flux cleaned = -8.1826e-06 Jy ! Component: 150 - total flux cleaned = -1.42113e-05 Jy ! Component: 200 - total flux cleaned = -1.93295e-05 Jy ! Total flux subtracted in 200 components = -1.93295e-05 Jy ! Clean residual min=-0.002080 max=0.002280 Jy/beam ! Clean residual mean=0.000004 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.192257 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 71 components and 0.192257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101340Jy sigma=0.000659 ! Fit after self-cal, rms=0.101339Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=8.698 mas, bpa=-9.503 degrees ! Estimated noise=802.576 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.588 x 8.698 at -9.503 degrees (North through East) ! Clean map min=-0.0020485 max=0.18273 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=8.007 mas, bpa=-11.6 degrees ! Estimated noise=1137.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14183 Jy ! Component: 100 - total flux cleaned = 0.172787 Jy ! Component: 150 - total flux cleaned = 0.181713 Jy ! Component: 200 - total flux cleaned = 0.186337 Jy ! Total flux subtracted in 200 components = 0.186337 Jy ! Clean residual min=-0.003085 max=0.003098 Jy/beam ! Clean residual mean=0.000002 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.186337 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.186337 Jy ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=8.698 mas, bpa=-9.503 degrees ! Estimated noise=802.576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314449 Jy ! Component: 100 - total flux cleaned = 0.00472401 Jy ! Component: 150 - total flux cleaned = 0.0055934 Jy ! Component: 200 - total flux cleaned = 0.00578181 Jy ! Total flux subtracted in 200 components = 0.00578181 Jy ! Clean residual min=-0.002183 max=0.001968 Jy/beam ! Clean residual mean=0.000003 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.192118 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 0.192118 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.398 mas, bmaj=11.13 mas, bpa=-7.975 degrees ! Estimated noise=939.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139443 Jy ! Component: 100 - total flux cleaned = 0.000189783 Jy ! Component: 150 - total flux cleaned = 0.000226357 Jy ! Component: 200 - total flux cleaned = 0.000236355 Jy ! Total flux subtracted in 200 components = 0.000236355 Jy ! Clean residual min=-0.002062 max=0.002308 Jy/beam ! Clean residual mean=0.000004 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.192355 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.5846e-06 Jy ! Component: 100 - total flux cleaned = -1.43443e-05 Jy ! Component: 150 - total flux cleaned = -1.42054e-05 Jy ! Component: 200 - total flux cleaned = -1.42904e-05 Jy ! Total flux subtracted in 200 components = -1.42904e-05 Jy ! Clean residual min=-0.002066 max=0.002306 Jy/beam ! Clean residual mean=0.000004 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.19234 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.19234 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.588 mas, bmaj=8.698 mas, bpa=-9.503 degrees ! Estimated noise=802.576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.39205e-05 Jy ! Component: 100 - total flux cleaned = 0.000149258 Jy ! Component: 150 - total flux cleaned = 0.000208609 Jy ! Component: 200 - total flux cleaned = 0.00019081 Jy ! Total flux subtracted in 200 components = 0.00019081 Jy ! Clean residual min=-0.002156 max=0.001952 Jy/beam ! Clean residual mean=0.000003 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.192531 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.192531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101361Jy sigma=0.000659 ! Fit after self-cal, rms=0.101356Jy sigma=0.000659 wmodel J1717+1917_S_2017_03_23_pus_map.mod ! Writing 76 model components to file: J1717+1917_S_2017_03_23_pus_map.mod wobs J1717+1917_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J1717+1917_S_2017_03_23_pus_uvs.fits wwins J1717+1917_S_2017_03_23_pus_map.win ! wwins: Wrote 1 windows to J1717+1917_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000266801 Jy ! Component: 100 - total flux cleaned = -0.000434022 Jy ! Component: 150 - total flux cleaned = -0.000692677 Jy ! Component: 200 - total flux cleaned = -0.00088186 Jy ! Component: 250 - total flux cleaned = -0.00109583 Jy ! Component: 300 - total flux cleaned = -0.00109563 Jy ! Component: 350 - total flux cleaned = -0.00115429 Jy ! Component: 400 - total flux cleaned = -0.0010976 Jy ! Component: 450 - total flux cleaned = -0.00109829 Jy ! Component: 500 - total flux cleaned = -0.0010434 Jy ! Component: 550 - total flux cleaned = -0.000935647 Jy ! Component: 600 - total flux cleaned = -0.000856384 Jy ! Component: 650 - total flux cleaned = -0.000778761 Jy ! Component: 700 - total flux cleaned = -0.000702441 Jy ! Component: 750 - total flux cleaned = -0.000551368 Jy ! Component: 800 - total flux cleaned = -0.000451892 Jy ! Component: 850 - total flux cleaned = -0.00028023 Jy ! Component: 900 - total flux cleaned = -0.00011118 Jy ! Component: 950 - total flux cleaned = 7.93271e-05 Jy ! Component: 1000 - total flux cleaned = 0.000220745 Jy ! Component: 1050 - total flux cleaned = 0.000383271 Jy ! Component: 1100 - total flux cleaned = 0.000452489 Jy ! Component: 1150 - total flux cleaned = 0.000588626 Jy ! Component: 1200 - total flux cleaned = 0.000789936 Jy ! Component: 1250 - total flux cleaned = 0.000900664 Jy ! Component: 1300 - total flux cleaned = 0.000987951 Jy ! Component: 1350 - total flux cleaned = 0.00111734 Jy ! Component: 1400 - total flux cleaned = 0.0012242 Jy ! Component: 1450 - total flux cleaned = 0.00126642 Jy ! Component: 1500 - total flux cleaned = 0.00128724 Jy ! Component: 1550 - total flux cleaned = 0.00137027 Jy ! Component: 1600 - total flux cleaned = 0.00137039 Jy ! Component: 1650 - total flux cleaned = 0.00143142 Jy ! Component: 1700 - total flux cleaned = 0.00149153 Jy ! Component: 1750 - total flux cleaned = 0.00149179 Jy ! Component: 1800 - total flux cleaned = 0.00153121 Jy ! Component: 1850 - total flux cleaned = 0.00158948 Jy ! Component: 1900 - total flux cleaned = 0.0016473 Jy ! Component: 1950 - total flux cleaned = 0.0016282 Jy ! Component: 2000 - total flux cleaned = 0.0017042 Jy ! Component: 2050 - total flux cleaned = 0.00172289 Jy ! Component: 2100 - total flux cleaned = 0.00179776 Jy ! Component: 2150 - total flux cleaned = 0.00181624 Jy ! Component: 2200 - total flux cleaned = 0.00179762 Jy ! Component: 2250 - total flux cleaned = 0.00188897 Jy ! Component: 2300 - total flux cleaned = 0.00192518 Jy ! Component: 2350 - total flux cleaned = 0.00192522 Jy ! Component: 2400 - total flux cleaned = 0.00187201 Jy ! Component: 2450 - total flux cleaned = 0.00201335 Jy ! Component: 2500 - total flux cleaned = 0.00197822 Jy ! Component: 2550 - total flux cleaned = 0.00204797 Jy ! Component: 2600 - total flux cleaned = 0.00208234 Jy ! Component: 2650 - total flux cleaned = 0.00209953 Jy ! Component: 2700 - total flux cleaned = 0.00216765 Jy ! Component: 2750 - total flux cleaned = 0.00211693 Jy ! Component: 2800 - total flux cleaned = 0.00215031 Jy ! Component: 2850 - total flux cleaned = 0.00213366 Jy ! Component: 2900 - total flux cleaned = 0.00215035 Jy ! Component: 2950 - total flux cleaned = 0.00224871 Jy ! Component: 3000 - total flux cleaned = 0.00219964 Jy ! Component: 3050 - total flux cleaned = 0.00218351 Jy ! Component: 3100 - total flux cleaned = 0.00219958 Jy ! Component: 3150 - total flux cleaned = 0.00221564 Jy ! Component: 3200 - total flux cleaned = 0.00219973 Jy ! Component: 3250 - total flux cleaned = 0.00221548 Jy ! Component: 3300 - total flux cleaned = 0.0021842 Jy ! Component: 3350 - total flux cleaned = 0.00221534 Jy ! Component: 3400 - total flux cleaned = 0.00215344 Jy ! Component: 3450 - total flux cleaned = 0.0022149 Jy ! Component: 3500 - total flux cleaned = 0.00223018 Jy ! Component: 3550 - total flux cleaned = 0.00221486 Jy ! Component: 3600 - total flux cleaned = 0.00218481 Jy ! Component: 3650 - total flux cleaned = 0.00216991 Jy ! Component: 3700 - total flux cleaned = 0.00216995 Jy ! Component: 3750 - total flux cleaned = 0.00218451 Jy ! Component: 3800 - total flux cleaned = 0.00218446 Jy ! Component: 3850 - total flux cleaned = 0.00219902 Jy ! Component: 3900 - total flux cleaned = 0.0021264 Jy ! Component: 3950 - total flux cleaned = 0.00212631 Jy ! Component: 4000 - total flux cleaned = 0.00212647 Jy ! Component: 4050 - total flux cleaned = 0.00212651 Jy ! Total flux subtracted in 4096 components = 0.00209811 Jy ! Clean residual min=-0.000869 max=0.000860 Jy/beam ! Clean residual mean=0.000002 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.194629 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 381 components and 0.194629 Jy ![Exited script file: muppet] wmap "J1717+1917_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.588 x 8.698 at -9.503 degrees (North through East) ! Clean map min=-0.0017491 max=0.18293 Jy/beam ! Writing clean map to FITS file: J1717+1917_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.182926 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000270423 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.443496 0.443496 0.886992 1.77398 3.54797 7.09594 14.1919 28.3837 56.7675 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.182 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.588 x 8.698 at -9.503 degrees (North through East) ! Clean map min=-0.0017491 max=0.18293 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1717+1917_S_2017_03_23_pus_uvs.log closed on Mon May 13 10:05:44 2019