! Started logfile: J1714-2514_S_2017_09_26_pus_uvs.log on Sat May 11 13:03:38 2019 obs J1714-2514_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1714-2514_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.759354 visibilities/baseline/integration-bin. ! Found source: J1714-2514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 32148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1714-2514_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 372 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 607 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 607 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1683 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985715Jy sigma=0.006783 ! Fit after self-cal, rms=0.937723Jy sigma=0.006470 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=13.81 mas, bpa=-21.12 degrees ! Estimated noise=1543.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461337 Jy ! Component: 100 - total flux cleaned = 0.0587644 Jy ! Total flux subtracted in 100 components = 0.0587644 Jy ! Clean residual min=-0.006725 max=0.007545 Jy/beam ! Clean residual mean=-0.000062 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 0.0587644 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0587644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111969Jy sigma=0.000743 ! Fit after self-cal, rms=0.111037Jy sigma=0.000737 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.638 mas, bmaj=16.12 mas, bpa=-21.47 degrees ! Estimated noise=700.892 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.018284 Jy ! Component: 100 - total flux cleaned = 0.0285523 Jy ! Component: 150 - total flux cleaned = 0.0345669 Jy ! Component: 200 - total flux cleaned = 0.0383304 Jy ! Total flux subtracted in 200 components = 0.0383304 Jy ! Clean residual min=-0.011415 max=0.014860 Jy/beam ! Clean residual mean=-0.000045 rms=0.004312 Jy/beam ! Combined flux in latest and established models = 0.0970948 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 77 components and 0.0970948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108533Jy sigma=0.000712 ! Fit after self-cal, rms=0.108293Jy sigma=0.000710 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.84 HN 0.93 KP 1.27 ! LA 0.80 MK 1.11 NL 1.18 OV 1.69 ! PT 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 0.88 KP 1.34 ! LA 0.73 MK 1.14 NL 1.34 OV 1.72 ! PT 0.85 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.89 KP 1.25 ! LA 0.76 MK 1.06 NL 1.21 OV 1.48 ! PT 0.82 ! ! ! Correcting IF 4. ! A total of 312 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 0.65 KP 1.00* ! LA 0.83 MK 0.91 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.108293Jy sigma=0.000710 ! Fit after self-cal, rms=0.128775Jy sigma=0.000692 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.627 mas, bmaj=16.57 mas, bpa=-21.04 degrees ! Estimated noise=720.293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010385 Jy ! Component: 100 - total flux cleaned = 0.00116373 Jy ! Component: 150 - total flux cleaned = 0.00127272 Jy ! Component: 200 - total flux cleaned = 0.00132183 Jy ! Total flux subtracted in 200 components = 0.00132183 Jy ! Clean residual min=-0.009630 max=0.011604 Jy/beam ! Clean residual mean=0.000079 rms=0.003579 Jy/beam ! Combined flux in latest and established models = 0.0984166 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.0984166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128680Jy sigma=0.000691 ! Fit after self-cal, rms=0.130673Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130673Jy sigma=0.000686 ! Fit after self-cal, rms=0.169177Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.642 mas, bmaj=16.6 mas, bpa=-20.46 degrees ! Estimated noise=758.724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317415 Jy ! Component: 100 - total flux cleaned = 0.00352654 Jy ! Component: 150 - total flux cleaned = 0.00364568 Jy ! Component: 200 - total flux cleaned = 0.00374663 Jy ! Total flux subtracted in 200 components = 0.00374663 Jy ! Clean residual min=-0.007709 max=0.008829 Jy/beam ! Clean residual mean=0.000028 rms=0.002757 Jy/beam ! Combined flux in latest and established models = 0.102163 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 0.102163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168953Jy sigma=0.000672 ! Fit after self-cal, rms=0.170499Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000506854 Jy ! Component: 100 - total flux cleaned = -0.000685245 Jy ! Component: 150 - total flux cleaned = -0.00072449 Jy ! Component: 200 - total flux cleaned = -0.000725441 Jy ! Total flux subtracted in 200 components = -0.000725441 Jy ! Clean residual min=-0.007516 max=0.008114 Jy/beam ! Clean residual mean=0.000025 rms=0.002666 Jy/beam ! Combined flux in latest and established models = 0.101438 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 98 components and 0.101438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170482Jy sigma=0.000671 ! Fit after self-cal, rms=0.170439Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170439Jy sigma=0.000671 ! Fit after self-cal, rms=0.191785Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.645 mas, bmaj=16.6 mas, bpa=-20.06 degrees ! Estimated noise=762.726 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828598 Jy ! Component: 100 - total flux cleaned = 0.00097826 Jy ! Component: 150 - total flux cleaned = 0.00106683 Jy ! Component: 200 - total flux cleaned = 0.00110449 Jy ! Total flux subtracted in 200 components = 0.00110449 Jy ! Clean residual min=-0.007186 max=0.008222 Jy/beam ! Clean residual mean=0.000010 rms=0.002545 Jy/beam ! Combined flux in latest and established models = 0.102542 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 102 components and 0.102542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191720Jy sigma=0.000669 ! Fit after self-cal, rms=0.192209Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149389 Jy ! Component: 100 - total flux cleaned = -0.000192212 Jy ! Component: 150 - total flux cleaned = -0.000193808 Jy ! Component: 200 - total flux cleaned = -0.000193764 Jy ! Total flux subtracted in 200 components = -0.000193764 Jy ! Clean residual min=-0.007084 max=0.008346 Jy/beam ! Clean residual mean=0.000010 rms=0.002523 Jy/beam ! Combined flux in latest and established models = 0.102349 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 103 components and 0.102349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192190Jy sigma=0.000669 ! Fit after self-cal, rms=0.192168Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192168Jy sigma=0.000669 ! Fit after self-cal, rms=0.196036Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.053 mas, bmaj=29.71 mas, bpa=-8.281 degrees ! Estimated noise=855.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146051 Jy ! Component: 100 - total flux cleaned = 0.0015112 Jy ! Component: 150 - total flux cleaned = 0.00151017 Jy ! Component: 200 - total flux cleaned = 0.00148084 Jy ! Total flux subtracted in 200 components = 0.00148084 Jy ! Clean residual min=-0.009902 max=0.012531 Jy/beam ! Clean residual mean=0.000019 rms=0.003875 Jy/beam ! Combined flux in latest and established models = 0.103829 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 107 components and 0.103829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195998Jy sigma=0.000669 ! Fit after self-cal, rms=0.195969Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.05146e-05 Jy ! Component: 100 - total flux cleaned = 4.91201e-05 Jy ! Component: 150 - total flux cleaned = 4.74341e-05 Jy ! Component: 200 - total flux cleaned = 4.69804e-05 Jy ! Total flux subtracted in 200 components = 4.69804e-05 Jy ! Clean residual min=-0.009796 max=0.012644 Jy/beam ! Clean residual mean=0.000020 rms=0.003878 Jy/beam ! Combined flux in latest and established models = 0.103876 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 114 components and 0.103876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195964Jy sigma=0.000669 ! Fit after self-cal, rms=0.195927Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.644 mas, bmaj=16.64 mas, bpa=-19.88 degrees ! Estimated noise=764.197 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.644 x 16.64 at -19.88 degrees (North through East) ! Clean map min=-0.0069556 max=0.062317 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=14.06 mas, bpa=-19.56 degrees ! Estimated noise=1658.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.047868 Jy ! Component: 100 - total flux cleaned = 0.0645672 Jy ! Component: 150 - total flux cleaned = 0.075823 Jy ! Component: 200 - total flux cleaned = 0.0837418 Jy ! Total flux subtracted in 200 components = 0.0837418 Jy ! Clean residual min=-0.006476 max=0.006310 Jy/beam ! Clean residual mean=-0.000018 rms=0.001712 Jy/beam ! Combined flux in latest and established models = 0.0837418 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0837418 Jy ! Inverting map and beam ! Estimated beam: bmin=3.644 mas, bmaj=16.64 mas, bpa=-19.88 degrees ! Estimated noise=764.197 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00995513 Jy ! Component: 100 - total flux cleaned = 0.0150615 Jy ! Component: 150 - total flux cleaned = 0.0171913 Jy ! Component: 200 - total flux cleaned = 0.0175431 Jy ! Total flux subtracted in 200 components = 0.0175431 Jy ! Clean residual min=-0.007532 max=0.008491 Jy/beam ! Clean residual mean=0.000007 rms=0.002540 Jy/beam ! Combined flux in latest and established models = 0.101285 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 37 components and 0.101285 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.053 mas, bmaj=29.71 mas, bpa=-8.281 degrees ! Estimated noise=855.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195018 Jy ! Component: 100 - total flux cleaned = 0.00206125 Jy ! Component: 150 - total flux cleaned = 0.00205522 Jy ! Component: 200 - total flux cleaned = 0.00205247 Jy ! Total flux subtracted in 200 components = 0.00205247 Jy ! Clean residual min=-0.009890 max=0.012537 Jy/beam ! Clean residual mean=0.000019 rms=0.003895 Jy/beam ! Combined flux in latest and established models = 0.103337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.02071e-06 Jy ! Component: 100 - total flux cleaned = 1.12868e-06 Jy ! Component: 150 - total flux cleaned = -2.95818e-05 Jy ! Component: 200 - total flux cleaned = -2.96935e-05 Jy ! Total flux subtracted in 200 components = -2.96935e-05 Jy ! Clean residual min=-0.009889 max=0.012501 Jy/beam ! Clean residual mean=0.000018 rms=0.003887 Jy/beam ! Combined flux in latest and established models = 0.103308 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 0.103308 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.644 mas, bmaj=16.64 mas, bpa=-19.88 degrees ! Estimated noise=764.197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000738959 Jy ! Component: 100 - total flux cleaned = -0.00108011 Jy ! Component: 150 - total flux cleaned = -0.0013088 Jy ! Component: 200 - total flux cleaned = -0.00140933 Jy ! Total flux subtracted in 200 components = -0.00140933 Jy ! Clean residual min=-0.007260 max=0.008464 Jy/beam ! Clean residual mean=0.000007 rms=0.002520 Jy/beam ! Combined flux in latest and established models = 0.101898 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.101898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195979Jy sigma=0.000669 ! Fit after self-cal, rms=0.195927Jy sigma=0.000669 wmodel J1714-2514_S_2017_09_26_pus_map.mod ! Writing 70 model components to file: J1714-2514_S_2017_09_26_pus_map.mod wobs J1714-2514_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1714-2514_S_2017_09_26_pus_uvs.fits wwins J1714-2514_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1714-2514_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312724 Jy ! Component: 100 - total flux cleaned = 0.00520006 Jy ! Component: 150 - total flux cleaned = 0.00660294 Jy ! Component: 200 - total flux cleaned = 0.00779695 Jy ! Component: 250 - total flux cleaned = 0.00890287 Jy ! Component: 300 - total flux cleaned = 0.0097395 Jy ! Component: 350 - total flux cleaned = 0.0108788 Jy ! Component: 400 - total flux cleaned = 0.012129 Jy ! Component: 450 - total flux cleaned = 0.0124447 Jy ! Component: 500 - total flux cleaned = 0.0127496 Jy ! Component: 550 - total flux cleaned = 0.0132642 Jy ! Component: 600 - total flux cleaned = 0.0136882 Jy ! Component: 650 - total flux cleaned = 0.0141662 Jy ! Component: 700 - total flux cleaned = 0.0146929 Jy ! Component: 750 - total flux cleaned = 0.0152658 Jy ! Component: 800 - total flux cleaned = 0.0156983 Jy ! Component: 850 - total flux cleaned = 0.0162413 Jy ! Component: 900 - total flux cleaned = 0.0167695 Jy ! Component: 950 - total flux cleaned = 0.0172269 Jy ! Component: 1000 - total flux cleaned = 0.0178386 Jy ! Component: 1050 - total flux cleaned = 0.0182721 Jy ! Component: 1100 - total flux cleaned = 0.0188024 Jy ! Component: 1150 - total flux cleaned = 0.0192675 Jy ! Component: 1200 - total flux cleaned = 0.0196211 Jy ! Component: 1250 - total flux cleaned = 0.0200152 Jy ! Component: 1300 - total flux cleaned = 0.0204499 Jy ! Component: 1350 - total flux cleaned = 0.0209213 Jy ! Component: 1400 - total flux cleaned = 0.021292 Jy ! Component: 1450 - total flux cleaned = 0.0216547 Jy ! Component: 1500 - total flux cleaned = 0.0217443 Jy ! Component: 1550 - total flux cleaned = 0.0220075 Jy ! Component: 1600 - total flux cleaned = 0.0222668 Jy ! Component: 1650 - total flux cleaned = 0.0225212 Jy ! Component: 1700 - total flux cleaned = 0.0227307 Jy ! Component: 1750 - total flux cleaned = 0.022977 Jy ! Component: 1800 - total flux cleaned = 0.0232197 Jy ! Component: 1850 - total flux cleaned = 0.0233389 Jy ! Component: 1900 - total flux cleaned = 0.0235742 Jy ! Component: 1950 - total flux cleaned = 0.0237672 Jy ! Component: 2000 - total flux cleaned = 0.0238817 Jy ! Component: 2050 - total flux cleaned = 0.0240695 Jy ! Component: 2100 - total flux cleaned = 0.0240696 Jy ! Component: 2150 - total flux cleaned = 0.0242527 Jy ! Component: 2200 - total flux cleaned = 0.0242887 Jy ! Component: 2250 - total flux cleaned = 0.0242531 Jy ! Component: 2300 - total flux cleaned = 0.0242888 Jy ! Component: 2350 - total flux cleaned = 0.0242891 Jy ! Component: 2400 - total flux cleaned = 0.0242892 Jy ! Component: 2450 - total flux cleaned = 0.0242208 Jy ! Component: 2500 - total flux cleaned = 0.0242544 Jy ! Component: 2550 - total flux cleaned = 0.0241873 Jy ! Component: 2600 - total flux cleaned = 0.0240884 Jy ! Component: 2650 - total flux cleaned = 0.024121 Jy ! Component: 2700 - total flux cleaned = 0.0241208 Jy ! Component: 2750 - total flux cleaned = 0.0240561 Jy ! Component: 2800 - total flux cleaned = 0.0239928 Jy ! Component: 2850 - total flux cleaned = 0.0239297 Jy ! Component: 2900 - total flux cleaned = 0.0238676 Jy ! Component: 2950 - total flux cleaned = 0.0238367 Jy ! Component: 3000 - total flux cleaned = 0.0237451 Jy ! Component: 3050 - total flux cleaned = 0.0238059 Jy ! Component: 3100 - total flux cleaned = 0.0237755 Jy ! Component: 3150 - total flux cleaned = 0.0238352 Jy ! Component: 3200 - total flux cleaned = 0.0238054 Jy ! Component: 3250 - total flux cleaned = 0.0238056 Jy ! Component: 3300 - total flux cleaned = 0.0238347 Jy ! Component: 3350 - total flux cleaned = 0.0237476 Jy ! Component: 3400 - total flux cleaned = 0.0238056 Jy ! Component: 3450 - total flux cleaned = 0.0238058 Jy ! Component: 3500 - total flux cleaned = 0.0237773 Jy ! Component: 3550 - total flux cleaned = 0.0237775 Jy ! Component: 3600 - total flux cleaned = 0.023806 Jy ! Component: 3650 - total flux cleaned = 0.0238341 Jy ! Component: 3700 - total flux cleaned = 0.0238901 Jy ! Component: 3750 - total flux cleaned = 0.0238621 Jy ! Component: 3800 - total flux cleaned = 0.0238898 Jy ! Component: 3850 - total flux cleaned = 0.0238896 Jy ! Component: 3900 - total flux cleaned = 0.023862 Jy ! Component: 3950 - total flux cleaned = 0.0238618 Jy ! Component: 4000 - total flux cleaned = 0.0238617 Jy ! Component: 4050 - total flux cleaned = 0.023889 Jy ! Total flux subtracted in 4096 components = 0.0238618 Jy ! Clean residual min=-0.001527 max=0.001533 Jy/beam ! Clean residual mean=-0.000020 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.12576 Jy keep ! Adding 449 model components to the UV plane model. ! The established model now contains 519 components and 0.12576 Jy ![Exited script file: muppet] wmap "J1714-2514_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.644 x 16.64 at -19.88 degrees (North through East) ! Clean map min=-0.0033372 max=0.060634 Jy/beam ! Writing clean map to FITS file: J1714-2514_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0606342 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000596618 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.95189 2.95189 5.90377 11.8075 23.6151 47.2302 94.4604 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.644 x 16.64 at -19.88 degrees (North through East) ! Clean map min=-0.0033372 max=0.060634 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1714-2514_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:03:44 2019