! Started logfile: J1714-2514_S_2017_05_01_pus_uvs.log on Wed May 1 18:40:59 2019 obs J1714-2514_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1714-2514_S_2017_05_01_pus_uva.fits ! AN table 1: 165 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.712997 visibilities/baseline/integration-bin. ! Found source: J1714-2514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 21176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1714-2514_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 322 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 254 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1161 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998704Jy sigma=0.006360 ! Fit after self-cal, rms=0.944939Jy sigma=0.006039 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=7.895 mas, bpa=7.647 degrees ! Estimated noise=1470.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0456859 Jy ! Component: 100 - total flux cleaned = 0.0570916 Jy ! Total flux subtracted in 100 components = 0.0570916 Jy ! Clean residual min=-0.007384 max=0.006305 Jy/beam ! Clean residual mean=-0.000009 rms=0.001826 Jy/beam ! Combined flux in latest and established models = 0.0570916 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0570916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115839Jy sigma=0.000688 ! Fit after self-cal, rms=0.114626Jy sigma=0.000681 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.681 mas, bmaj=10.83 mas, bpa=8.607 degrees ! Estimated noise=888.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00874882 Jy ! Component: 100 - total flux cleaned = 0.0126394 Jy ! Component: 150 - total flux cleaned = 0.0145974 Jy ! Component: 200 - total flux cleaned = 0.015681 Jy ! Total flux subtracted in 200 components = 0.015681 Jy ! Clean residual min=-0.008415 max=0.009265 Jy/beam ! Clean residual mean=0.000011 rms=0.003187 Jy/beam ! Combined flux in latest and established models = 0.0727727 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 57 components and 0.0727726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114057Jy sigma=0.000677 ! Fit after self-cal, rms=0.114073Jy sigma=0.000676 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 0.94 HN 0.90 KP 0.86 ! LA 0.90 MK 1.10 NL 1.27 OV 1.27 ! PT 0.79 SC 1.14 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.01 HN 0.93 KP 0.80 ! LA 0.93 MK 1.18 NL 1.26 OV 1.18 ! PT 0.79 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.03 HN 0.92 KP 0.91 ! LA 0.95 MK 1.19 NL 1.22 OV 1.13 ! PT 0.84 SC 0.99 ! ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.13 HN 0.61 KP 1.00* ! LA 1.00* MK 0.79 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.114073Jy sigma=0.000676 ! Fit after self-cal, rms=0.117829Jy sigma=0.000674 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.748 mas, bmaj=11.08 mas, bpa=8.31 degrees ! Estimated noise=911.247 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334866 Jy ! Component: 100 - total flux cleaned = 0.000386585 Jy ! Component: 150 - total flux cleaned = 0.000482913 Jy ! Component: 200 - total flux cleaned = 0.000547038 Jy ! Total flux subtracted in 200 components = 0.000547038 Jy ! Clean residual min=-0.007984 max=0.010817 Jy/beam ! Clean residual mean=0.000047 rms=0.003108 Jy/beam ! Combined flux in latest and established models = 0.0733197 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 62 components and 0.0733197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117819Jy sigma=0.000674 ! Fit after self-cal, rms=0.118408Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118408Jy sigma=0.000672 ! Fit after self-cal, rms=0.151037Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=11.17 mas, bpa=7.88 degrees ! Estimated noise=1024.54 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610991 Jy ! Component: 100 - total flux cleaned = 0.00714059 Jy ! Component: 150 - total flux cleaned = 0.00705788 Jy ! Component: 200 - total flux cleaned = 0.00702233 Jy ! Total flux subtracted in 200 components = 0.00702233 Jy ! Clean residual min=-0.008320 max=0.014452 Jy/beam ! Clean residual mean=0.000063 rms=0.003068 Jy/beam ! Combined flux in latest and established models = 0.080342 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.080342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150547Jy sigma=0.000666 ! Fit after self-cal, rms=0.152272Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000916299 Jy ! Component: 100 - total flux cleaned = -0.000987336 Jy ! Component: 150 - total flux cleaned = -0.00106479 Jy ! Component: 200 - total flux cleaned = -0.00111151 Jy ! Total flux subtracted in 200 components = -0.00111151 Jy ! Clean residual min=-0.008068 max=0.011266 Jy/beam ! Clean residual mean=0.000045 rms=0.002839 Jy/beam ! Combined flux in latest and established models = 0.0792305 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 69 components and 0.0792305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152272Jy sigma=0.000664 ! Fit after self-cal, rms=0.152258Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152258Jy sigma=0.000664 ! Fit after self-cal, rms=0.194328Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.875 mas, bmaj=11.5 mas, bpa=7.591 degrees ! Estimated noise=1093.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00310796 Jy ! Component: 100 - total flux cleaned = 0.00291351 Jy ! Component: 150 - total flux cleaned = 0.00262506 Jy ! Component: 200 - total flux cleaned = 0.00237767 Jy ! Total flux subtracted in 200 components = 0.00237767 Jy ! Clean residual min=-0.007576 max=0.012010 Jy/beam ! Clean residual mean=0.000032 rms=0.002709 Jy/beam ! Combined flux in latest and established models = 0.0816082 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 70 components and 0.0816082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194010Jy sigma=0.000659 ! Fit after self-cal, rms=0.196125Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-47, -126.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00881246 Jy ! Component: 100 - total flux cleaned = 0.0127947 Jy ! Component: 150 - total flux cleaned = 0.0147471 Jy ! Component: 200 - total flux cleaned = 0.0152221 Jy ! Total flux subtracted in 200 components = 0.0152221 Jy ! Clean residual min=-0.006220 max=0.008101 Jy/beam ! Clean residual mean=-0.000014 rms=0.002019 Jy/beam ! Combined flux in latest and established models = 0.0968303 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.0968303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195675Jy sigma=0.000654 ! Fit after self-cal, rms=0.194121Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194121Jy sigma=0.000653 ! Fit after self-cal, rms=0.185196Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.335 mas, bmaj=23.3 mas, bpa=8.432 degrees ! Estimated noise=1169.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00835383 Jy ! Component: 100 - total flux cleaned = 0.0121958 Jy ! Component: 150 - total flux cleaned = 0.0145101 Jy ! Component: 200 - total flux cleaned = 0.015746 Jy ! Total flux subtracted in 200 components = 0.015746 Jy ! Clean residual min=-0.007993 max=0.008391 Jy/beam ! Clean residual mean=-0.000014 rms=0.002710 Jy/beam ! Combined flux in latest and established models = 0.112576 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 104 components and 0.112576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184983Jy sigma=0.000648 ! Fit after self-cal, rms=0.183814Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004606 Jy ! Component: 100 - total flux cleaned = 0.00647103 Jy ! Component: 150 - total flux cleaned = 0.0070063 Jy ! Component: 200 - total flux cleaned = 0.00719242 Jy ! Total flux subtracted in 200 components = 0.00719242 Jy ! Clean residual min=-0.009273 max=0.009247 Jy/beam ! Clean residual mean=-0.000016 rms=0.003125 Jy/beam ! Combined flux in latest and established models = 0.119769 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 107 components and 0.119769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183668Jy sigma=0.000647 ! Fit after self-cal, rms=0.183186Jy sigma=0.000646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=11.54 mas, bpa=7.382 degrees ! Estimated noise=1099.98 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.919 x 11.54 at 7.382 degrees (North through East) ! Clean map min=-0.006492 max=0.075505 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.732 mas, bmaj=8.186 mas, bpa=5.41 degrees ! Estimated noise=1888.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0575031 Jy ! Component: 100 - total flux cleaned = 0.0760379 Jy ! Component: 150 - total flux cleaned = 0.0867472 Jy ! Component: 200 - total flux cleaned = 0.0939495 Jy ! Total flux subtracted in 200 components = 0.0939495 Jy ! Clean residual min=-0.006609 max=0.008678 Jy/beam ! Clean residual mean=0.000014 rms=0.001782 Jy/beam ! Combined flux in latest and established models = 0.0939494 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0939494 Jy ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=11.54 mas, bpa=7.382 degrees ! Estimated noise=1099.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00848557 Jy ! Component: 100 - total flux cleaned = 0.0143087 Jy ! Component: 150 - total flux cleaned = 0.0185539 Jy ! Component: 200 - total flux cleaned = 0.0216683 Jy ! Total flux subtracted in 200 components = 0.0216683 Jy ! Clean residual min=-0.006940 max=0.007424 Jy/beam ! Clean residual mean=0.000001 rms=0.002139 Jy/beam ! Combined flux in latest and established models = 0.115618 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 36 components and 0.115618 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.335 mas, bmaj=23.3 mas, bpa=8.432 degrees ! Estimated noise=1169.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312198 Jy ! Component: 100 - total flux cleaned = 0.00429946 Jy ! Component: 150 - total flux cleaned = 0.00471307 Jy ! Component: 200 - total flux cleaned = 0.00501539 Jy ! Total flux subtracted in 200 components = 0.00501539 Jy ! Clean residual min=-0.009959 max=0.009274 Jy/beam ! Clean residual mean=-0.000007 rms=0.003183 Jy/beam ! Combined flux in latest and established models = 0.120633 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00011199 Jy ! Component: 100 - total flux cleaned = 0.000164409 Jy ! Component: 150 - total flux cleaned = 0.000217088 Jy ! Component: 200 - total flux cleaned = 0.000216603 Jy ! Total flux subtracted in 200 components = 0.000216603 Jy ! Clean residual min=-0.009913 max=0.009340 Jy/beam ! Clean residual mean=-0.000009 rms=0.003177 Jy/beam ! Combined flux in latest and established models = 0.12085 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.12085 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.919 mas, bmaj=11.54 mas, bpa=7.382 degrees ! Estimated noise=1099.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000533263 Jy ! Component: 100 - total flux cleaned = -0.000650687 Jy ! Component: 150 - total flux cleaned = -0.000705178 Jy ! Component: 200 - total flux cleaned = -0.000706871 Jy ! Total flux subtracted in 200 components = -0.000706871 Jy ! Clean residual min=-0.006657 max=0.006961 Jy/beam ! Clean residual mean=-0.000006 rms=0.002142 Jy/beam ! Combined flux in latest and established models = 0.120143 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 65 components and 0.120143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183073Jy sigma=0.000646 ! Fit after self-cal, rms=0.182712Jy sigma=0.000646 wmodel J1714-2514_S_2017_05_01_pus_map.mod ! Writing 65 model components to file: J1714-2514_S_2017_05_01_pus_map.mod wobs J1714-2514_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1714-2514_S_2017_05_01_pus_uvs.fits wwins J1714-2514_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J1714-2514_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185126 Jy ! Component: 100 - total flux cleaned = 0.00349052 Jy ! Component: 150 - total flux cleaned = 0.00502837 Jy ! Component: 200 - total flux cleaned = 0.00586175 Jy ! Component: 250 - total flux cleaned = 0.00625948 Jy ! Component: 300 - total flux cleaned = 0.00720903 Jy ! Component: 350 - total flux cleaned = 0.00766257 Jy ! Component: 400 - total flux cleaned = 0.00783481 Jy ! Component: 450 - total flux cleaned = 0.007919 Jy ! Component: 500 - total flux cleaned = 0.00825184 Jy ! Component: 550 - total flux cleaned = 0.00857731 Jy ! Component: 600 - total flux cleaned = 0.00897285 Jy ! Component: 650 - total flux cleaned = 0.00958917 Jy ! Component: 700 - total flux cleaned = 0.0101137 Jy ! Component: 750 - total flux cleaned = 0.0107021 Jy ! Component: 800 - total flux cleaned = 0.0114965 Jy ! Component: 850 - total flux cleaned = 0.0122014 Jy ! Component: 900 - total flux cleaned = 0.012617 Jy ! Component: 950 - total flux cleaned = 0.0131612 Jy ! Component: 1000 - total flux cleaned = 0.0135616 Jy ! Component: 1050 - total flux cleaned = 0.0142168 Jy ! Component: 1100 - total flux cleaned = 0.0146664 Jy ! Component: 1150 - total flux cleaned = 0.0149817 Jy ! Component: 1200 - total flux cleaned = 0.0152923 Jy ! Component: 1250 - total flux cleaned = 0.0155967 Jy ! Component: 1300 - total flux cleaned = 0.0157762 Jy ! Component: 1350 - total flux cleaned = 0.016191 Jy ! Component: 1400 - total flux cleaned = 0.0165964 Jy ! Component: 1450 - total flux cleaned = 0.0166528 Jy ! Component: 1500 - total flux cleaned = 0.0170481 Jy ! Component: 1550 - total flux cleaned = 0.0172151 Jy ! Component: 1600 - total flux cleaned = 0.0174341 Jy ! Component: 1650 - total flux cleaned = 0.017652 Jy ! Component: 1700 - total flux cleaned = 0.0178122 Jy ! Component: 1750 - total flux cleaned = 0.017811 Jy ! Component: 1800 - total flux cleaned = 0.0177587 Jy ! Component: 1850 - total flux cleaned = 0.01781 Jy ! Component: 1900 - total flux cleaned = 0.0176584 Jy ! Component: 1950 - total flux cleaned = 0.0178093 Jy ! Component: 2000 - total flux cleaned = 0.0177103 Jy ! Component: 2050 - total flux cleaned = 0.0178087 Jy ! Component: 2100 - total flux cleaned = 0.0177607 Jy ! Component: 2150 - total flux cleaned = 0.0179033 Jy ! Component: 2200 - total flux cleaned = 0.0178085 Jy ! Component: 2250 - total flux cleaned = 0.0177622 Jy ! Component: 2300 - total flux cleaned = 0.0177621 Jy ! Component: 2350 - total flux cleaned = 0.0176715 Jy ! Component: 2400 - total flux cleaned = 0.0178057 Jy ! Component: 2450 - total flux cleaned = 0.0176734 Jy ! Component: 2500 - total flux cleaned = 0.0177608 Jy ! Component: 2550 - total flux cleaned = 0.0177604 Jy ! Component: 2600 - total flux cleaned = 0.0177174 Jy ! Component: 2650 - total flux cleaned = 0.0178025 Jy ! Component: 2700 - total flux cleaned = 0.01797 Jy ! Component: 2750 - total flux cleaned = 0.0179282 Jy ! Component: 2800 - total flux cleaned = 0.017928 Jy ! Component: 2850 - total flux cleaned = 0.0179279 Jy ! Component: 2900 - total flux cleaned = 0.0180081 Jy ! Component: 2950 - total flux cleaned = 0.0180486 Jy ! Component: 3000 - total flux cleaned = 0.0181667 Jy ! Component: 3050 - total flux cleaned = 0.0182444 Jy ! Component: 3100 - total flux cleaned = 0.0182051 Jy ! Component: 3150 - total flux cleaned = 0.0182055 Jy ! Component: 3200 - total flux cleaned = 0.018319 Jy ! Component: 3250 - total flux cleaned = 0.018319 Jy ! Component: 3300 - total flux cleaned = 0.0180955 Jy ! Component: 3350 - total flux cleaned = 0.0182809 Jy ! Component: 3400 - total flux cleaned = 0.0182437 Jy ! Component: 3450 - total flux cleaned = 0.0182438 Jy ! Component: 3500 - total flux cleaned = 0.0182803 Jy ! Component: 3550 - total flux cleaned = 0.0183875 Jy ! Component: 3600 - total flux cleaned = 0.0183875 Jy ! Component: 3650 - total flux cleaned = 0.0183521 Jy ! Component: 3700 - total flux cleaned = 0.0184218 Jy ! Component: 3750 - total flux cleaned = 0.0184564 Jy ! Component: 3800 - total flux cleaned = 0.0185247 Jy ! Component: 3850 - total flux cleaned = 0.018524 Jy ! Component: 3900 - total flux cleaned = 0.0185576 Jy ! Component: 3950 - total flux cleaned = 0.0185245 Jy ! Component: 4000 - total flux cleaned = 0.0186241 Jy ! Component: 4050 - total flux cleaned = 0.0185913 Jy ! Total flux subtracted in 4096 components = 0.0186238 Jy ! Clean residual min=-0.001693 max=0.001750 Jy/beam ! Clean residual mean=-0.000006 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.138767 Jy keep ! Adding 445 model components to the UV plane model. ! The established model now contains 510 components and 0.138767 Jy ![Exited script file: muppet] wmap "J1714-2514_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.919 x 11.54 at 7.382 degrees (North through East) ! Clean map min=-0.004806 max=0.078443 Jy/beam ! Writing clean map to FITS file: J1714-2514_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0784431 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000759294 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.90387 2.90387 5.80773 11.6155 23.2309 46.4619 92.9237 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.078 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.919 x 11.54 at 7.382 degrees (North through East) ! Clean map min=-0.004806 max=0.078443 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1714-2514_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:41:04 2019