! Started logfile: J1713-3226_S_2017_08_05_pus_uvs.log on Thu May 9 19:34:03 2019 obs J1713-3226_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1713-3226_S_2017_08_05_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.608621 visibilities/baseline/integration-bin. ! Found source: J1713-3226 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 12708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1713-3226_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 281 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 397 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 352 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1160 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.788265Jy sigma=0.004958 ! Fit after self-cal, rms=0.766531Jy sigma=0.004813 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.37 mas, bmaj=6.436 mas, bpa=0.1408 degrees ! Estimated noise=2019.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.421565 Jy ! Component: 100 - total flux cleaned = 0.676994 Jy ! Total flux subtracted in 100 components = 0.676994 Jy ! Clean residual min=-0.064123 max=0.146628 Jy/beam ! Clean residual mean=-0.002676 rms=0.027902 Jy/beam ! Combined flux in latest and established models = 0.676994 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.676994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512079Jy sigma=0.003163 ! Fit after self-cal, rms=0.511021Jy sigma=0.003157 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=7.036 mas, bpa=0.325 degrees ! Estimated noise=1291.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.298055 Jy ! Component: 100 - total flux cleaned = 0.460812 Jy ! Component: 150 - total flux cleaned = 0.551243 Jy ! Component: 200 - total flux cleaned = 0.601512 Jy ! Total flux subtracted in 200 components = 0.601512 Jy ! Clean residual min=-0.054805 max=0.111826 Jy/beam ! Clean residual mean=-0.002229 rms=0.023877 Jy/beam ! Combined flux in latest and established models = 1.27851 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 67 components and 1.27851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296533Jy sigma=0.001703 ! Fit after self-cal, rms=0.294472Jy sigma=0.001690 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.54 FD 1.00* HN 1.00* KP 0.95 ! LA 0.92 MK 1.57 NL 1.31 OV 1.05 ! PT 0.91 SC 1.49 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.91 ! LA 0.87 MK 1.58 NL 1.49 OV 1.13 ! PT 0.87 SC 1.49 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.80 ! LA 0.68 MK 1.81 NL 1.65 OV 1.02 ! PT 0.87 SC 1.30 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.294472Jy sigma=0.001690 ! Fit after self-cal, rms=0.192486Jy sigma=0.000804 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.181 mas, bmaj=7.926 mas, bpa=2.066 degrees ! Estimated noise=1570.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017388 Jy ! Component: 100 - total flux cleaned = -0.00175593 Jy ! Component: 150 - total flux cleaned = -0.00139448 Jy ! Component: 200 - total flux cleaned = -0.00122655 Jy ! Total flux subtracted in 200 components = -0.00122655 Jy ! Clean residual min=-0.023351 max=0.027626 Jy/beam ! Clean residual mean=-0.000512 rms=0.006775 Jy/beam ! Combined flux in latest and established models = 1.27728 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 1.27728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191861Jy sigma=0.000802 ! Fit after self-cal, rms=0.193723Jy sigma=0.000799 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193723Jy sigma=0.000799 ! Fit after self-cal, rms=0.194010Jy sigma=0.000781 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=7.96 mas, bpa=2.506 degrees ! Estimated noise=1580.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130923 Jy ! Component: 100 - total flux cleaned = -0.00189343 Jy ! Component: 150 - total flux cleaned = -0.00188219 Jy ! Component: 200 - total flux cleaned = -0.00161196 Jy ! Total flux subtracted in 200 components = -0.00161196 Jy ! Clean residual min=-0.019916 max=0.023964 Jy/beam ! Clean residual mean=-0.000461 rms=0.006196 Jy/beam ! Combined flux in latest and established models = 1.27567 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 71 components and 1.27567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193450Jy sigma=0.000780 ! Fit after self-cal, rms=0.193750Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000248989 Jy ! Component: 100 - total flux cleaned = 4.67722e-05 Jy ! Component: 150 - total flux cleaned = 4.31847e-05 Jy ! Component: 200 - total flux cleaned = 3.88321e-05 Jy ! Total flux subtracted in 200 components = 3.88321e-05 Jy ! Clean residual min=-0.019866 max=0.024006 Jy/beam ! Clean residual mean=-0.000461 rms=0.006186 Jy/beam ! Combined flux in latest and established models = 1.27571 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 73 components and 1.27571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193429Jy sigma=0.000779 ! Fit after self-cal, rms=0.193512Jy sigma=0.000779 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193512Jy sigma=0.000779 ! Fit after self-cal, rms=0.201669Jy sigma=0.000775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=8.136 mas, bpa=2.539 degrees ! Estimated noise=1611.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000767272 Jy ! Component: 100 - total flux cleaned = -0.000774367 Jy ! Component: 150 - total flux cleaned = -0.000914632 Jy ! Component: 200 - total flux cleaned = -0.000656734 Jy ! Total flux subtracted in 200 components = -0.000656734 Jy ! Clean residual min=-0.020165 max=0.023690 Jy/beam ! Clean residual mean=-0.000429 rms=0.006175 Jy/beam ! Combined flux in latest and established models = 1.27505 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 73 components and 1.27505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201290Jy sigma=0.000774 ! Fit after self-cal, rms=0.201570Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127647 Jy ! Component: 100 - total flux cleaned = 0.00013781 Jy ! Component: 150 - total flux cleaned = 0.000138015 Jy ! Component: 200 - total flux cleaned = 0.00025231 Jy ! Total flux subtracted in 200 components = 0.00025231 Jy ! Clean residual min=-0.020163 max=0.023749 Jy/beam ! Clean residual mean=-0.000428 rms=0.006157 Jy/beam ! Combined flux in latest and established models = 1.2753 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 1.2753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201330Jy sigma=0.000773 ! Fit after self-cal, rms=0.201338Jy sigma=0.000773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201338Jy sigma=0.000773 ! Fit after self-cal, rms=0.208273Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.683 mas, bmaj=28.16 mas, bpa=0.203 degrees ! Estimated noise=1740.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527326 Jy ! Component: 100 - total flux cleaned = 0.00538642 Jy ! Component: 150 - total flux cleaned = 0.0054904 Jy ! Component: 200 - total flux cleaned = 0.00549541 Jy ! Total flux subtracted in 200 components = 0.00549541 Jy ! Clean residual min=-0.024015 max=0.029372 Jy/beam ! Clean residual mean=-0.000712 rms=0.008912 Jy/beam ! Combined flux in latest and established models = 1.2808 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 74 components and 1.2808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208147Jy sigma=0.000773 ! Fit after self-cal, rms=0.208097Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117231 Jy ! Component: 100 - total flux cleaned = 0.000224516 Jy ! Component: 150 - total flux cleaned = 0.000327586 Jy ! Component: 200 - total flux cleaned = 0.000335626 Jy ! Total flux subtracted in 200 components = 0.000335626 Jy ! Clean residual min=-0.024006 max=0.029301 Jy/beam ! Clean residual mean=-0.000709 rms=0.008895 Jy/beam ! Combined flux in latest and established models = 1.28113 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 74 components and 1.28113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207998Jy sigma=0.000773 ! Fit after self-cal, rms=0.208078Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=8.31 mas, bpa=2.502 degrees ! Estimated noise=1635.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.299 x 8.31 at 2.502 degrees (North through East) ! Clean map min=-0.019517 max=0.53457 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208078Jy sigma=0.000773 ! Fit after self-cal, rms=0.356020Jy sigma=0.000701 ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=8.403 mas, bpa=1.646 degrees ! Estimated noise=1650.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000603551 Jy ! Component: 100 - total flux cleaned = -0.00060333 Jy ! Component: 150 - total flux cleaned = -0.000733584 Jy ! Component: 200 - total flux cleaned = -0.000844482 Jy ! Total flux subtracted in 200 components = -0.000844482 Jy ! Clean residual min=-0.020314 max=0.024031 Jy/beam ! Clean residual mean=-0.000440 rms=0.006221 Jy/beam ! Combined flux in latest and established models = 1.28029 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 1.28029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355829Jy sigma=0.000700 ! Fit after self-cal, rms=0.355856Jy sigma=0.000700 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289268 Jy ! Component: 100 - total flux cleaned = 0.000279234 Jy ! Component: 150 - total flux cleaned = 0.000172558 Jy ! Component: 200 - total flux cleaned = 0.000268521 Jy ! Total flux subtracted in 200 components = 0.000268521 Jy ! Clean residual min=-0.020228 max=0.023969 Jy/beam ! Clean residual mean=-0.000438 rms=0.006198 Jy/beam ! Combined flux in latest and established models = 1.28056 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 1.28056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355723Jy sigma=0.000700 ! Fit after self-cal, rms=0.355527Jy sigma=0.000700 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.355527Jy sigma=0.000700 ! Fit after self-cal, rms=0.394093Jy sigma=0.000699 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.764 mas, bmaj=7.329 mas, bpa=1.179 degrees ! Estimated noise=3092.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.598118 Jy ! Component: 100 - total flux cleaned = 0.898471 Jy ! Component: 150 - total flux cleaned = 1.06027 Jy ! Component: 200 - total flux cleaned = 1.14986 Jy ! Total flux subtracted in 200 components = 1.14986 Jy ! Clean residual min=-0.036818 max=0.064480 Jy/beam ! Clean residual mean=-0.000803 rms=0.011688 Jy/beam ! Combined flux in latest and established models = 1.14986 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 60 model components to the UV plane model. ! The established model now contains 60 components and 1.14986 Jy ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=8.54 mas, bpa=1.694 degrees ! Estimated noise=1667.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0727892 Jy ! Component: 100 - total flux cleaned = 0.108519 Jy ! Component: 150 - total flux cleaned = 0.128672 Jy ! Component: 200 - total flux cleaned = 0.140536 Jy ! Total flux subtracted in 200 components = 0.140536 Jy ! Clean residual min=-0.018633 max=0.024220 Jy/beam ! Clean residual mean=-0.000388 rms=0.006097 Jy/beam ! Combined flux in latest and established models = 1.29039 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 1.29039 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.715 mas, bmaj=28.72 mas, bpa=-0.09008 degrees ! Estimated noise=1746.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00898201 Jy ! Component: 100 - total flux cleaned = 0.00942583 Jy ! Component: 150 - total flux cleaned = 0.0102428 Jy ! Component: 200 - total flux cleaned = 0.0108075 Jy ! Total flux subtracted in 200 components = 0.0108075 Jy ! Clean residual min=-0.023974 max=0.031490 Jy/beam ! Clean residual mean=-0.000559 rms=0.008752 Jy/beam ! Combined flux in latest and established models = 1.3012 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000535504 Jy ! Component: 100 - total flux cleaned = 0.00104432 Jy ! Component: 150 - total flux cleaned = 0.00152211 Jy ! Component: 200 - total flux cleaned = 0.00182464 Jy ! Total flux subtracted in 200 components = 0.00182464 Jy ! Clean residual min=-0.023972 max=0.030888 Jy/beam ! Clean residual mean=-0.000542 rms=0.008720 Jy/beam ! Combined flux in latest and established models = 1.30303 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 103 components and 1.30303 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.358 mas, bmaj=8.54 mas, bpa=1.694 degrees ! Estimated noise=1667.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125169 Jy ! Component: 100 - total flux cleaned = -0.000695818 Jy ! Component: 150 - total flux cleaned = -0.000191056 Jy ! Component: 200 - total flux cleaned = -0.000190608 Jy ! Total flux subtracted in 200 components = -0.000190608 Jy ! Clean residual min=-0.018217 max=0.022234 Jy/beam ! Clean residual mean=-0.000307 rms=0.005866 Jy/beam ! Combined flux in latest and established models = 1.30284 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 117 components and 1.30284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.391656Jy sigma=0.000688 ! Fit after self-cal, rms=0.387438Jy sigma=0.000684 wmodel J1713-3226_S_2017_08_05_pus_map.mod ! Writing 117 model components to file: J1713-3226_S_2017_08_05_pus_map.mod wobs J1713-3226_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1713-3226_S_2017_08_05_pus_uvs.fits wwins J1713-3226_S_2017_08_05_pus_map.win ! wwins: Wrote 2 windows to J1713-3226_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00968656 Jy ! Component: 100 - total flux cleaned = 0.0165154 Jy ! Component: 150 - total flux cleaned = 0.0208957 Jy ! Component: 200 - total flux cleaned = 0.0244138 Jy ! Component: 250 - total flux cleaned = 0.0282845 Jy ! Component: 300 - total flux cleaned = 0.0319394 Jy ! Component: 350 - total flux cleaned = 0.0353972 Jy ! Component: 400 - total flux cleaned = 0.0386809 Jy ! Component: 450 - total flux cleaned = 0.0418135 Jy ! Component: 500 - total flux cleaned = 0.0450205 Jy ! Component: 550 - total flux cleaned = 0.0476812 Jy ! Component: 600 - total flux cleaned = 0.0502319 Jy ! Component: 650 - total flux cleaned = 0.0523052 Jy ! Component: 700 - total flux cleaned = 0.0541213 Jy ! Component: 750 - total flux cleaned = 0.0558593 Jy ! Component: 800 - total flux cleaned = 0.057035 Jy ! Component: 850 - total flux cleaned = 0.0589942 Jy ! Component: 900 - total flux cleaned = 0.0608896 Jy ! Component: 950 - total flux cleaned = 0.0627307 Jy ! Component: 1000 - total flux cleaned = 0.0640692 Jy ! Component: 1050 - total flux cleaned = 0.0656665 Jy ! Component: 1100 - total flux cleaned = 0.0667969 Jy ! Component: 1150 - total flux cleaned = 0.0680406 Jy ! Component: 1200 - total flux cleaned = 0.0691199 Jy ! Component: 1250 - total flux cleaned = 0.0704351 Jy ! Component: 1300 - total flux cleaned = 0.0714601 Jy ! Component: 1350 - total flux cleaned = 0.0724616 Jy ! Component: 1400 - total flux cleaned = 0.073444 Jy ! Component: 1450 - total flux cleaned = 0.0745258 Jy ! Component: 1500 - total flux cleaned = 0.0753467 Jy ! Component: 1550 - total flux cleaned = 0.0762676 Jy ! Component: 1600 - total flux cleaned = 0.0767188 Jy ! Component: 1650 - total flux cleaned = 0.0772732 Jy ! Component: 1700 - total flux cleaned = 0.077708 Jy ! Component: 1750 - total flux cleaned = 0.078137 Jy ! Component: 1800 - total flux cleaned = 0.0788714 Jy ! Component: 1850 - total flux cleaned = 0.0794898 Jy ! Component: 1900 - total flux cleaned = 0.079896 Jy ! Component: 1950 - total flux cleaned = 0.0803945 Jy ! Component: 2000 - total flux cleaned = 0.0808847 Jy ! Component: 2050 - total flux cleaned = 0.0811741 Jy ! Component: 2100 - total flux cleaned = 0.0816515 Jy ! Component: 2150 - total flux cleaned = 0.0820277 Jy ! Component: 2200 - total flux cleaned = 0.0823057 Jy ! Component: 2250 - total flux cleaned = 0.0827629 Jy ! Component: 2300 - total flux cleaned = 0.082944 Jy ! Component: 2350 - total flux cleaned = 0.0833895 Jy ! Component: 2400 - total flux cleaned = 0.0835656 Jy ! Component: 2450 - total flux cleaned = 0.0835656 Jy ! Component: 2500 - total flux cleaned = 0.0838235 Jy ! Component: 2550 - total flux cleaned = 0.0838229 Jy ! Component: 2600 - total flux cleaned = 0.0839913 Jy ! Component: 2650 - total flux cleaned = 0.0840747 Jy ! Component: 2700 - total flux cleaned = 0.0841567 Jy ! Component: 2750 - total flux cleaned = 0.0841566 Jy ! Component: 2800 - total flux cleaned = 0.0842387 Jy ! Component: 2850 - total flux cleaned = 0.0841581 Jy ! Component: 2900 - total flux cleaned = 0.0842383 Jy ! Component: 2950 - total flux cleaned = 0.0843185 Jy ! Component: 3000 - total flux cleaned = 0.0845562 Jy ! Component: 3050 - total flux cleaned = 0.0843984 Jy ! Component: 3100 - total flux cleaned = 0.0845553 Jy ! Component: 3150 - total flux cleaned = 0.0844773 Jy ! Component: 3200 - total flux cleaned = 0.0843218 Jy ! Component: 3250 - total flux cleaned = 0.0844766 Jy ! Component: 3300 - total flux cleaned = 0.0845535 Jy ! Component: 3350 - total flux cleaned = 0.0843993 Jy ! Component: 3400 - total flux cleaned = 0.0844766 Jy ! Component: 3450 - total flux cleaned = 0.0845532 Jy ! Component: 3500 - total flux cleaned = 0.0844766 Jy ! Component: 3550 - total flux cleaned = 0.0844765 Jy ! Component: 3600 - total flux cleaned = 0.0845529 Jy ! Component: 3650 - total flux cleaned = 0.0846294 Jy ! Component: 3700 - total flux cleaned = 0.0849334 Jy ! Component: 3750 - total flux cleaned = 0.0850854 Jy ! Component: 3800 - total flux cleaned = 0.0850098 Jy ! Component: 3850 - total flux cleaned = 0.0851611 Jy ! Component: 3900 - total flux cleaned = 0.0853123 Jy ! Component: 3950 - total flux cleaned = 0.0854639 Jy ! Component: 4000 - total flux cleaned = 0.0856157 Jy ! Component: 4050 - total flux cleaned = 0.0858423 Jy ! Total flux subtracted in 4096 components = 0.0860692 Jy ! Clean residual min=-0.004423 max=0.004534 Jy/beam ! Clean residual mean=0.000003 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 1.3889 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 454 components and 1.3889 Jy ![Exited script file: muppet] wmap "J1713-3226_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.358 x 8.54 at 1.694 degrees (North through East) ! Clean map min=-0.0098035 max=0.61086 Jy/beam ! Writing clean map to FITS file: J1713-3226_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.610857 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00170986 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.839736 0.839736 1.67947 3.35895 6.71789 13.4358 26.8716 53.7431 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0051 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.61 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.358 x 8.54 at 1.694 degrees (North through East) ! Clean map min=-0.0098035 max=0.61086 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1713-3226_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:34:08 2019