! Started logfile: J1711-3338_S_2017_08_05_pus_uvs.log on Thu May 9 19:33:57 2019 obs J1711-3338_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J1711-3338_S_2017_08_05_pus_uva.fits ! AN table 1: 170 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.441307 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1711-3338 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 13504 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1711-3338_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 685 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 640 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 558 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1700 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978624Jy sigma=0.006340 ! Fit after self-cal, rms=0.931953Jy sigma=0.006036 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.059 mas, bmaj=6.152 mas, bpa=-0.1398 degrees ! Estimated noise=2366.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506859 Jy ! Component: 100 - total flux cleaned = 0.0657808 Jy ! Total flux subtracted in 100 components = 0.0657808 Jy ! Clean residual min=-0.009013 max=0.009285 Jy/beam ! Clean residual mean=-0.000251 rms=0.002744 Jy/beam ! Combined flux in latest and established models = 0.0657808 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0657808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109875Jy sigma=0.000670 ! Fit after self-cal, rms=0.109107Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.588 mas, bmaj=6.868 mas, bpa=0.1924 degrees ! Estimated noise=1191.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171073 Jy ! Component: 100 - total flux cleaned = 0.0263854 Jy ! Component: 150 - total flux cleaned = 0.031488 Jy ! Component: 200 - total flux cleaned = 0.0342932 Jy ! Total flux subtracted in 200 components = 0.0342932 Jy ! Clean residual min=-0.007309 max=0.010977 Jy/beam ! Clean residual mean=-0.000364 rms=0.003133 Jy/beam ! Combined flux in latest and established models = 0.100074 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 37 components and 0.100074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106385Jy sigma=0.000649 ! Fit after self-cal, rms=0.106087Jy sigma=0.000647 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.02 ! LA 0.97 MK 1.12 NL 1.00* OV 1.16 ! PT 0.90 SC 1.10 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.90 ! LA 0.92 MK 1.06 NL 1.27 OV 1.14 ! PT 0.96 SC 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.80 ! LA 0.76 MK 1.07 NL 1.34 OV 1.02 ! PT 0.90 SC 1.09 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.106087Jy sigma=0.000647 ! Fit after self-cal, rms=0.107778Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.7 mas, bmaj=7.072 mas, bpa=-0.0454 degrees ! Estimated noise=1210.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103053 Jy ! Component: 100 - total flux cleaned = -0.00102948 Jy ! Component: 150 - total flux cleaned = -0.00103257 Jy ! Component: 200 - total flux cleaned = -0.0010318 Jy ! Total flux subtracted in 200 components = -0.0010318 Jy ! Clean residual min=-0.007288 max=0.011495 Jy/beam ! Clean residual mean=-0.000295 rms=0.002871 Jy/beam ! Combined flux in latest and established models = 0.0990422 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0990422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107733Jy sigma=0.000641 ! Fit after self-cal, rms=0.108067Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108067Jy sigma=0.000639 ! Fit after self-cal, rms=0.111506Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=7.035 mas, bpa=-0.1952 degrees ! Estimated noise=1229.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231637 Jy ! Component: 100 - total flux cleaned = 0.000410948 Jy ! Component: 150 - total flux cleaned = 0.00049671 Jy ! Component: 200 - total flux cleaned = 0.000497729 Jy ! Total flux subtracted in 200 components = 0.000497729 Jy ! Clean residual min=-0.006746 max=0.010728 Jy/beam ! Clean residual mean=-0.000257 rms=0.002726 Jy/beam ! Combined flux in latest and established models = 0.0995399 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0995399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111480Jy sigma=0.000636 ! Fit after self-cal, rms=0.111618Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.24789e-05 Jy ! Component: 100 - total flux cleaned = 0.00011757 Jy ! Component: 150 - total flux cleaned = 0.000118885 Jy ! Component: 200 - total flux cleaned = 0.00014658 Jy ! Total flux subtracted in 200 components = 0.00014658 Jy ! Clean residual min=-0.006543 max=0.010441 Jy/beam ! Clean residual mean=-0.000258 rms=0.002717 Jy/beam ! Combined flux in latest and established models = 0.0996865 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.0996865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111597Jy sigma=0.000636 ! Fit after self-cal, rms=0.111556Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111556Jy sigma=0.000636 ! Fit after self-cal, rms=0.112709Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=6.974 mas, bpa=-0.2595 degrees ! Estimated noise=1224.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000341932 Jy ! Component: 100 - total flux cleaned = 0.000227703 Jy ! Component: 150 - total flux cleaned = 0.00013046 Jy ! Component: 200 - total flux cleaned = 7.5379e-05 Jy ! Total flux subtracted in 200 components = 7.5379e-05 Jy ! Clean residual min=-0.006605 max=0.010117 Jy/beam ! Clean residual mean=-0.000223 rms=0.002628 Jy/beam ! Combined flux in latest and established models = 0.0997618 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 48 components and 0.0997618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112685Jy sigma=0.000635 ! Fit after self-cal, rms=0.112751Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.72127e-05 Jy ! Component: 100 - total flux cleaned = -2.72515e-05 Jy ! Component: 150 - total flux cleaned = -5.48696e-05 Jy ! Component: 200 - total flux cleaned = -5.17779e-05 Jy ! Total flux subtracted in 200 components = -5.17779e-05 Jy ! Clean residual min=-0.006418 max=0.010003 Jy/beam ! Clean residual mean=-0.000223 rms=0.002614 Jy/beam ! Combined flux in latest and established models = 0.0997101 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.0997101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112731Jy sigma=0.000635 ! Fit after self-cal, rms=0.112717Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112717Jy sigma=0.000635 ! Fit after self-cal, rms=0.112135Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.316 mas, bmaj=24.84 mas, bpa=-2.191 degrees ! Estimated noise=1606.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125893 Jy ! Component: 100 - total flux cleaned = 0.00125846 Jy ! Component: 150 - total flux cleaned = 0.00128574 Jy ! Component: 200 - total flux cleaned = 0.00128856 Jy ! Total flux subtracted in 200 components = 0.00128856 Jy ! Clean residual min=-0.011667 max=0.019136 Jy/beam ! Clean residual mean=-0.000478 rms=0.005374 Jy/beam ! Combined flux in latest and established models = 0.100999 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 51 components and 0.100999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112140Jy sigma=0.000635 ! Fit after self-cal, rms=0.112125Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.25903e-05 Jy ! Component: 100 - total flux cleaned = 3.32428e-05 Jy ! Component: 150 - total flux cleaned = 3.37846e-05 Jy ! Component: 200 - total flux cleaned = 3.25527e-05 Jy ! Total flux subtracted in 200 components = 3.25527e-05 Jy ! Clean residual min=-0.011682 max=0.019153 Jy/beam ! Clean residual mean=-0.000477 rms=0.005358 Jy/beam ! Combined flux in latest and established models = 0.101031 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 51 components and 0.101031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112138Jy sigma=0.000635 ! Fit after self-cal, rms=0.112114Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=6.938 mas, bpa=-0.3652 degrees ! Estimated noise=1215.35 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.733 x 6.938 at -0.3652 degrees (North through East) ! Clean map min=-0.0062177 max=0.06571 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.145 mas, bmaj=6.018 mas, bpa=-0.2094 degrees ! Estimated noise=2531.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524416 Jy ! Component: 100 - total flux cleaned = 0.0724178 Jy ! Component: 150 - total flux cleaned = 0.0843344 Jy ! Component: 200 - total flux cleaned = 0.0917053 Jy ! Total flux subtracted in 200 components = 0.0917053 Jy ! Clean residual min=-0.007597 max=0.008199 Jy/beam ! Clean residual mean=-0.000119 rms=0.002253 Jy/beam ! Combined flux in latest and established models = 0.0917054 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0917054 Jy ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=6.938 mas, bpa=-0.3652 degrees ! Estimated noise=1215.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423614 Jy ! Component: 100 - total flux cleaned = 0.00571851 Jy ! Component: 150 - total flux cleaned = 0.0060208 Jy ! Component: 200 - total flux cleaned = 0.00627283 Jy ! Total flux subtracted in 200 components = 0.00627283 Jy ! Clean residual min=-0.006640 max=0.009647 Jy/beam ! Clean residual mean=-0.000229 rms=0.002615 Jy/beam ! Combined flux in latest and established models = 0.0979782 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.0979782 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.316 mas, bmaj=24.84 mas, bpa=-2.191 degrees ! Estimated noise=1606.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225333 Jy ! Component: 100 - total flux cleaned = 0.00242857 Jy ! Component: 150 - total flux cleaned = 0.00245952 Jy ! Component: 200 - total flux cleaned = 0.00245943 Jy ! Total flux subtracted in 200 components = 0.00245943 Jy ! Clean residual min=-0.011663 max=0.019327 Jy/beam ! Clean residual mean=-0.000486 rms=0.005382 Jy/beam ! Combined flux in latest and established models = 0.100438 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.91158e-05 Jy ! Component: 100 - total flux cleaned = 5.40651e-05 Jy ! Component: 150 - total flux cleaned = 5.56153e-05 Jy ! Component: 200 - total flux cleaned = 7.94303e-05 Jy ! Total flux subtracted in 200 components = 7.94303e-05 Jy ! Clean residual min=-0.011619 max=0.019273 Jy/beam ! Clean residual mean=-0.000484 rms=0.005375 Jy/beam ! Combined flux in latest and established models = 0.100517 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 23 components and 0.100517 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=6.938 mas, bpa=-0.3652 degrees ! Estimated noise=1215.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101065 Jy ! Component: 100 - total flux cleaned = -0.000955776 Jy ! Component: 150 - total flux cleaned = -0.00095545 Jy ! Component: 200 - total flux cleaned = -0.000993001 Jy ! Total flux subtracted in 200 components = -0.000993001 Jy ! Clean residual min=-0.006363 max=0.009672 Jy/beam ! Clean residual mean=-0.000218 rms=0.002582 Jy/beam ! Combined flux in latest and established models = 0.0995241 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.0995241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112106Jy sigma=0.000635 ! Fit after self-cal, rms=0.112058Jy sigma=0.000634 wmodel J1711-3338_S_2017_08_05_pus_map.mod ! Writing 33 model components to file: J1711-3338_S_2017_08_05_pus_map.mod wobs J1711-3338_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J1711-3338_S_2017_08_05_pus_uvs.fits wwins J1711-3338_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J1711-3338_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.004207 Jy ! Component: 100 - total flux cleaned = 0.00758368 Jy ! Component: 150 - total flux cleaned = 0.0105205 Jy ! Component: 200 - total flux cleaned = 0.0126722 Jy ! Component: 250 - total flux cleaned = 0.013767 Jy ! Component: 300 - total flux cleaned = 0.0148827 Jy ! Component: 350 - total flux cleaned = 0.0156685 Jy ! Component: 400 - total flux cleaned = 0.0159138 Jy ! Component: 450 - total flux cleaned = 0.016072 Jy ! Component: 500 - total flux cleaned = 0.0162169 Jy ! Component: 550 - total flux cleaned = 0.0163539 Jy ! Component: 600 - total flux cleaned = 0.0164206 Jy ! Component: 650 - total flux cleaned = 0.016485 Jy ! Component: 700 - total flux cleaned = 0.0167877 Jy ! Component: 750 - total flux cleaned = 0.0169607 Jy ! Component: 800 - total flux cleaned = 0.0170757 Jy ! Component: 850 - total flux cleaned = 0.0172376 Jy ! Component: 900 - total flux cleaned = 0.0173918 Jy ! Component: 950 - total flux cleaned = 0.0175383 Jy ! Component: 1000 - total flux cleaned = 0.0176796 Jy ! Component: 1050 - total flux cleaned = 0.0177242 Jy ! Component: 1100 - total flux cleaned = 0.0177677 Jy ! Component: 1150 - total flux cleaned = 0.0178926 Jy ! Component: 1200 - total flux cleaned = 0.0177324 Jy ! Component: 1250 - total flux cleaned = 0.0177333 Jy ! Component: 1300 - total flux cleaned = 0.0176208 Jy ! Component: 1350 - total flux cleaned = 0.0175118 Jy ! Component: 1400 - total flux cleaned = 0.0174771 Jy ! Component: 1450 - total flux cleaned = 0.0175113 Jy ! Component: 1500 - total flux cleaned = 0.0175765 Jy ! Component: 1550 - total flux cleaned = 0.0176401 Jy ! Component: 1600 - total flux cleaned = 0.0176702 Jy ! Component: 1650 - total flux cleaned = 0.0176693 Jy ! Component: 1700 - total flux cleaned = 0.0175811 Jy ! Component: 1750 - total flux cleaned = 0.0175232 Jy ! Component: 1800 - total flux cleaned = 0.0174113 Jy ! Component: 1850 - total flux cleaned = 0.0173842 Jy ! Component: 1900 - total flux cleaned = 0.0173571 Jy ! Component: 1950 - total flux cleaned = 0.017383 Jy ! Component: 2000 - total flux cleaned = 0.0173579 Jy ! Component: 2050 - total flux cleaned = 0.0173835 Jy ! Component: 2100 - total flux cleaned = 0.0174566 Jy ! Component: 2150 - total flux cleaned = 0.0173852 Jy ! Component: 2200 - total flux cleaned = 0.0173623 Jy ! Component: 2250 - total flux cleaned = 0.0173622 Jy ! Component: 2300 - total flux cleaned = 0.0173622 Jy ! Component: 2350 - total flux cleaned = 0.01734 Jy ! Component: 2400 - total flux cleaned = 0.0173614 Jy ! Component: 2450 - total flux cleaned = 0.0172973 Jy ! Component: 2500 - total flux cleaned = 0.0173607 Jy ! Component: 2550 - total flux cleaned = 0.0173606 Jy ! Component: 2600 - total flux cleaned = 0.0172785 Jy ! Component: 2650 - total flux cleaned = 0.0172378 Jy ! Component: 2700 - total flux cleaned = 0.0170771 Jy ! Component: 2750 - total flux cleaned = 0.0169776 Jy ! Component: 2800 - total flux cleaned = 0.0168393 Jy ! Component: 2850 - total flux cleaned = 0.0167412 Jy ! Component: 2900 - total flux cleaned = 0.0166242 Jy ! Component: 2950 - total flux cleaned = 0.0164694 Jy ! Component: 3000 - total flux cleaned = 0.0164501 Jy ! Component: 3050 - total flux cleaned = 0.0163542 Jy ! Component: 3100 - total flux cleaned = 0.0162777 Jy ! Component: 3150 - total flux cleaned = 0.0161825 Jy ! Component: 3200 - total flux cleaned = 0.0161636 Jy ! Component: 3250 - total flux cleaned = 0.0160878 Jy ! Component: 3300 - total flux cleaned = 0.0160121 Jy ! Component: 3350 - total flux cleaned = 0.0159932 Jy ! Component: 3400 - total flux cleaned = 0.0159555 Jy ! Component: 3450 - total flux cleaned = 0.0159366 Jy ! Component: 3500 - total flux cleaned = 0.0158613 Jy ! Component: 3550 - total flux cleaned = 0.0158801 Jy ! Component: 3600 - total flux cleaned = 0.0159554 Jy ! Component: 3650 - total flux cleaned = 0.0159931 Jy ! Component: 3700 - total flux cleaned = 0.0160498 Jy ! Component: 3750 - total flux cleaned = 0.0161067 Jy ! Component: 3800 - total flux cleaned = 0.0161255 Jy ! Component: 3850 - total flux cleaned = 0.0162016 Jy ! Component: 3900 - total flux cleaned = 0.0162207 Jy ! Component: 3950 - total flux cleaned = 0.0162588 Jy ! Component: 4000 - total flux cleaned = 0.0163162 Jy ! Component: 4050 - total flux cleaned = 0.0163546 Jy ! Total flux subtracted in 4096 components = 0.0163737 Jy ! Clean residual min=-0.001236 max=0.001151 Jy/beam ! Clean residual mean=-0.000005 rms=0.000334 Jy/beam ! Combined flux in latest and established models = 0.115898 Jy keep ! Adding 369 model components to the UV plane model. ! The established model now contains 402 components and 0.115898 Jy ![Exited script file: muppet] wmap "J1711-3338_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.733 x 6.938 at -0.3652 degrees (North through East) ! Clean map min=-0.0022839 max=0.068802 Jy/beam ! Writing clean map to FITS file: J1711-3338_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0688018 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000354782 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.54697 1.54697 3.09395 6.18789 12.3758 24.7516 49.5031 99.0063 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.733 x 6.938 at -0.3652 degrees (North through East) ! Clean map min=-0.0022839 max=0.068802 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1711-3338_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:34:03 2019