! Started logfile: J1711-2509_S_2017_10_21_pus_uvs.log on Sat May 11 21:02:48 2019 obs J1711-2509_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1711-2509_S_2017_10_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.577536 visibilities/baseline/integration-bin. ! Found source: J1711-2509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 9564 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1711-2509_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 264 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 405 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 491 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 861 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.973497Jy sigma=0.007703 ! Fit after self-cal, rms=0.932594Jy sigma=0.007416 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.948 mas, bmaj=23.19 mas, bpa=-9.752 degrees ! Estimated noise=2489.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0525927 Jy ! Component: 100 - total flux cleaned = 0.0659431 Jy ! Total flux subtracted in 100 components = 0.0659431 Jy ! Clean residual min=-0.007513 max=0.009492 Jy/beam ! Clean residual mean=-0.000059 rms=0.002248 Jy/beam ! Combined flux in latest and established models = 0.0659431 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0659431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093994Jy sigma=0.000699 ! Fit after self-cal, rms=0.093506Jy sigma=0.000695 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.091 mas, bmaj=26.78 mas, bpa=-10.62 degrees ! Estimated noise=1279.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0080838 Jy ! Component: 100 - total flux cleaned = 0.0112418 Jy ! Component: 150 - total flux cleaned = 0.0127067 Jy ! Component: 200 - total flux cleaned = 0.012959 Jy ! Total flux subtracted in 200 components = 0.012959 Jy ! Clean residual min=-0.005954 max=0.005333 Jy/beam ! Clean residual mean=-0.000040 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 0.078902 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 51 components and 0.078902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092792Jy sigma=0.000690 ! Fit after self-cal, rms=0.092796Jy sigma=0.000690 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.97 HN 0.96 KP 1.13 ! LA 1.09 MK 0.99 NL 1.12 OV 1.01 ! PT 0.93 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.14 KP 1.15 ! LA 1.02 MK 1.00* NL 1.00 OV 1.11 ! PT 0.85 ! ! ! Correcting IF 3. ! A total of 84 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.01 KP 1.15 ! LA 0.84 MK 1.00* NL 1.21 OV 0.80 ! PT 0.86 ! ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.092796Jy sigma=0.000690 ! Fit after self-cal, rms=0.091829Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.016 mas, bmaj=26.25 mas, bpa=-10.32 degrees ! Estimated noise=1331.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.10755e-06 Jy ! Component: 100 - total flux cleaned = -0.000395716 Jy ! Component: 150 - total flux cleaned = -0.000504767 Jy ! Component: 200 - total flux cleaned = -0.000655472 Jy ! Total flux subtracted in 200 components = -0.000655472 Jy ! Clean residual min=-0.004081 max=0.003480 Jy/beam ! Clean residual mean=0.000004 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.0782465 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.0782465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091772Jy sigma=0.000687 ! Fit after self-cal, rms=0.091955Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091955Jy sigma=0.000685 ! Fit after self-cal, rms=0.094061Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.017 mas, bmaj=26.3 mas, bpa=-10.48 degrees ! Estimated noise=1331 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564813 Jy ! Component: 100 - total flux cleaned = 0.000508972 Jy ! Component: 150 - total flux cleaned = 0.000459406 Jy ! Component: 200 - total flux cleaned = 0.000415637 Jy ! Total flux subtracted in 200 components = 0.000415637 Jy ! Clean residual min=-0.004073 max=0.002939 Jy/beam ! Clean residual mean=-0.000006 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.0786621 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.0786621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094031Jy sigma=0.000683 ! Fit after self-cal, rms=0.094396Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358907 Jy ! Component: 100 - total flux cleaned = 0.000390623 Jy ! Component: 150 - total flux cleaned = 0.000391879 Jy ! Component: 200 - total flux cleaned = 0.00034774 Jy ! Total flux subtracted in 200 components = 0.00034774 Jy ! Clean residual min=-0.004028 max=0.002990 Jy/beam ! Clean residual mean=-0.000011 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.0790099 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 93 components and 0.0790099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094371Jy sigma=0.000682 ! Fit after self-cal, rms=0.094367Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094367Jy sigma=0.000682 ! Fit after self-cal, rms=0.094920Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.972 mas, bmaj=26.25 mas, bpa=-10.48 degrees ! Estimated noise=1324.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000408408 Jy ! Component: 100 - total flux cleaned = 0.000379079 Jy ! Component: 150 - total flux cleaned = 0.000327369 Jy ! Component: 200 - total flux cleaned = 0.000260984 Jy ! Total flux subtracted in 200 components = 0.000260984 Jy ! Clean residual min=-0.003863 max=0.002961 Jy/beam ! Clean residual mean=-0.000007 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.0792709 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 102 components and 0.0792708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094896Jy sigma=0.000682 ! Fit after self-cal, rms=0.095032Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.35545e-05 Jy ! Component: 100 - total flux cleaned = -3.70852e-05 Jy ! Component: 150 - total flux cleaned = -5.83912e-05 Jy ! Component: 200 - total flux cleaned = -9.81504e-05 Jy ! Total flux subtracted in 200 components = -9.81504e-05 Jy ! Clean residual min=-0.003870 max=0.002951 Jy/beam ! Clean residual mean=-0.000010 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.0791727 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.0791727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095017Jy sigma=0.000681 ! Fit after self-cal, rms=0.095014Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095014Jy sigma=0.000681 ! Fit after self-cal, rms=0.095040Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.471 mas, bmaj=28.32 mas, bpa=-5.02 degrees ! Estimated noise=1429.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000357657 Jy ! Component: 100 - total flux cleaned = -0.000313096 Jy ! Component: 150 - total flux cleaned = -0.000310483 Jy ! Component: 200 - total flux cleaned = -0.000342597 Jy ! Total flux subtracted in 200 components = -0.000342597 Jy ! Clean residual min=-0.004163 max=0.003252 Jy/beam ! Clean residual mean=-0.000011 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.0788301 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 116 components and 0.0788301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095043Jy sigma=0.000681 ! Fit after self-cal, rms=0.095106Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269438 Jy ! Component: 100 - total flux cleaned = -0.000270097 Jy ! Component: 150 - total flux cleaned = -0.000270606 Jy ! Component: 200 - total flux cleaned = -0.000269394 Jy ! Total flux subtracted in 200 components = -0.000269394 Jy ! Clean residual min=-0.004237 max=0.003215 Jy/beam ! Clean residual mean=-0.000014 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.0785607 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 121 components and 0.0785607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095110Jy sigma=0.000681 ! Fit after self-cal, rms=0.095107Jy sigma=0.000681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.931 mas, bmaj=26.24 mas, bpa=-10.48 degrees ! Estimated noise=1319.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.931 x 26.24 at -10.48 degrees (North through East) ! Clean map min=-0.0037913 max=0.07001 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.852 mas, bmaj=23.12 mas, bpa=-9.759 degrees ! Estimated noise=2532.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515288 Jy ! Component: 100 - total flux cleaned = 0.066739 Jy ! Component: 150 - total flux cleaned = 0.0733351 Jy ! Component: 200 - total flux cleaned = 0.0746263 Jy ! Total flux subtracted in 200 components = 0.0746263 Jy ! Clean residual min=-0.005574 max=0.005011 Jy/beam ! Clean residual mean=-0.000018 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.0746263 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0746263 Jy ! Inverting map and beam ! Estimated beam: bmin=4.931 mas, bmaj=26.24 mas, bpa=-10.48 degrees ! Estimated noise=1319.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00334179 Jy ! Component: 100 - total flux cleaned = 0.00450128 Jy ! Component: 150 - total flux cleaned = 0.00471642 Jy ! Component: 200 - total flux cleaned = 0.00471575 Jy ! Total flux subtracted in 200 components = 0.00471575 Jy ! Clean residual min=-0.004123 max=0.002878 Jy/beam ! Clean residual mean=-0.000007 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.0793421 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.0793421 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.471 mas, bmaj=28.32 mas, bpa=-5.02 degrees ! Estimated noise=1429.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.55087e-05 Jy ! Component: 100 - total flux cleaned = -0.000246898 Jy ! Component: 150 - total flux cleaned = -0.000414258 Jy ! Component: 200 - total flux cleaned = -0.000521623 Jy ! Total flux subtracted in 200 components = -0.000521623 Jy ! Clean residual min=-0.004399 max=0.003157 Jy/beam ! Clean residual mean=-0.000013 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.0788204 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.77155e-05 Jy ! Component: 100 - total flux cleaned = -0.000169257 Jy ! Component: 150 - total flux cleaned = -0.000202976 Jy ! Component: 200 - total flux cleaned = -0.000235723 Jy ! Total flux subtracted in 200 components = -0.000235723 Jy ! Clean residual min=-0.004380 max=0.003124 Jy/beam ! Clean residual mean=-0.000014 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.0785847 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 0.0785847 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.931 mas, bmaj=26.24 mas, bpa=-10.48 degrees ! Estimated noise=1319.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000165129 Jy ! Component: 100 - total flux cleaned = 0.000287616 Jy ! Component: 150 - total flux cleaned = 0.00025469 Jy ! Component: 200 - total flux cleaned = 0.000224152 Jy ! Total flux subtracted in 200 components = 0.000224152 Jy ! Clean residual min=-0.003896 max=0.002883 Jy/beam ! Clean residual mean=-0.000010 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.0788089 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 84 components and 0.0788089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095111Jy sigma=0.000681 ! Fit after self-cal, rms=0.095114Jy sigma=0.000681 wmodel J1711-2509_S_2017_10_21_pus_map.mod ! Writing 84 model components to file: J1711-2509_S_2017_10_21_pus_map.mod wobs J1711-2509_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1711-2509_S_2017_10_21_pus_uvs.fits wwins J1711-2509_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J1711-2509_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167483 Jy ! Component: 100 - total flux cleaned = -0.00262863 Jy ! Component: 150 - total flux cleaned = -0.00312471 Jy ! Component: 200 - total flux cleaned = -0.00345269 Jy ! Component: 250 - total flux cleaned = -0.00378745 Jy ! Component: 300 - total flux cleaned = -0.00424631 Jy ! Component: 350 - total flux cleaned = -0.00468114 Jy ! Component: 400 - total flux cleaned = -0.00502998 Jy ! Component: 450 - total flux cleaned = -0.00536573 Jy ! Component: 500 - total flux cleaned = -0.00571807 Jy ! Component: 550 - total flux cleaned = -0.00597265 Jy ! Component: 600 - total flux cleaned = -0.00630187 Jy ! Component: 650 - total flux cleaned = -0.0065146 Jy ! Component: 700 - total flux cleaned = -0.00677157 Jy ! Component: 750 - total flux cleaned = -0.00699539 Jy ! Component: 800 - total flux cleaned = -0.00716485 Jy ! Component: 850 - total flux cleaned = -0.00730511 Jy ! Component: 900 - total flux cleaned = -0.00751061 Jy ! Component: 950 - total flux cleaned = -0.00764359 Jy ! Component: 1000 - total flux cleaned = -0.00777343 Jy ! Component: 1050 - total flux cleaned = -0.00790001 Jy ! Component: 1100 - total flux cleaned = -0.00804379 Jy ! Component: 1150 - total flux cleaned = -0.00810407 Jy ! Component: 1200 - total flux cleaned = -0.00822213 Jy ! Component: 1250 - total flux cleaned = -0.00828018 Jy ! Component: 1300 - total flux cleaned = -0.00837457 Jy ! Component: 1350 - total flux cleaned = -0.00844852 Jy ! Component: 1400 - total flux cleaned = -0.00855785 Jy ! Component: 1450 - total flux cleaned = -0.00855774 Jy ! Component: 1500 - total flux cleaned = -0.00868139 Jy ! Component: 1550 - total flux cleaned = -0.00873349 Jy ! Component: 1600 - total flux cleaned = -0.00875082 Jy ! Component: 1650 - total flux cleaned = -0.00880175 Jy ! Component: 1700 - total flux cleaned = -0.00886866 Jy ! Component: 1750 - total flux cleaned = -0.00885218 Jy ! Component: 1800 - total flux cleaned = -0.00893363 Jy ! Component: 1850 - total flux cleaned = -0.00894974 Jy ! Component: 1900 - total flux cleaned = -0.00899761 Jy ! Component: 1950 - total flux cleaned = -0.00904489 Jy ! Component: 2000 - total flux cleaned = -0.00906029 Jy ! Component: 2050 - total flux cleaned = -0.00906032 Jy ! Component: 2100 - total flux cleaned = -0.00910618 Jy ! Component: 2150 - total flux cleaned = -0.00913643 Jy ! Component: 2200 - total flux cleaned = -0.00918136 Jy ! Component: 2250 - total flux cleaned = -0.00924045 Jy ! Component: 2300 - total flux cleaned = -0.00926961 Jy ! Component: 2350 - total flux cleaned = -0.00934209 Jy ! Component: 2400 - total flux cleaned = -0.00939965 Jy ! Component: 2450 - total flux cleaned = -0.0094708 Jy ! Component: 2500 - total flux cleaned = -0.00949902 Jy ! Component: 2550 - total flux cleaned = -0.00958343 Jy ! Component: 2600 - total flux cleaned = -0.00962529 Jy ! Component: 2650 - total flux cleaned = -0.00968063 Jy ! Component: 2700 - total flux cleaned = -0.00974932 Jy ! Component: 2750 - total flux cleaned = -0.00980395 Jy ! Component: 2800 - total flux cleaned = -0.0098175 Jy ! Component: 2850 - total flux cleaned = -0.00984461 Jy ! Component: 2900 - total flux cleaned = -0.00987152 Jy ! Component: 2950 - total flux cleaned = -0.00989824 Jy ! Component: 3000 - total flux cleaned = -0.00991158 Jy ! Component: 3050 - total flux cleaned = -0.00993805 Jy ! Component: 3100 - total flux cleaned = -0.00993816 Jy ! Component: 3150 - total flux cleaned = -0.00996447 Jy ! Component: 3200 - total flux cleaned = -0.0100298 Jy ! Component: 3250 - total flux cleaned = -0.0100429 Jy ! Component: 3300 - total flux cleaned = -0.0100817 Jy ! Component: 3350 - total flux cleaned = -0.0101204 Jy ! Component: 3400 - total flux cleaned = -0.0101204 Jy ! Component: 3450 - total flux cleaned = -0.0101331 Jy ! Component: 3500 - total flux cleaned = -0.0101459 Jy ! Component: 3550 - total flux cleaned = -0.0101713 Jy ! Component: 3600 - total flux cleaned = -0.0101713 Jy ! Component: 3650 - total flux cleaned = -0.0101713 Jy ! Component: 3700 - total flux cleaned = -0.0101966 Jy ! Component: 3750 - total flux cleaned = -0.010184 Jy ! Component: 3800 - total flux cleaned = -0.0101966 Jy ! Component: 3850 - total flux cleaned = -0.0102215 Jy ! Component: 3900 - total flux cleaned = -0.0102215 Jy ! Component: 3950 - total flux cleaned = -0.0102215 Jy ! Component: 4000 - total flux cleaned = -0.010234 Jy ! Component: 4050 - total flux cleaned = -0.0102839 Jy ! Total flux subtracted in 4096 components = -0.0102963 Jy ! Clean residual min=-0.000688 max=0.000670 Jy/beam ! Clean residual mean=-0.000009 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0685126 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 402 components and 0.0685126 Jy ![Exited script file: muppet] wmap "J1711-2509_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.931 x 26.24 at -10.48 degrees (North through East) ! Clean map min=-0.0027675 max=0.069455 Jy/beam ! Writing clean map to FITS file: J1711-2509_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0694552 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000232006 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00211 1.00211 2.00422 4.00844 8.01688 16.0338 32.0675 64.1351 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.931 x 26.24 at -10.48 degrees (North through East) ! Clean map min=-0.0027675 max=0.069455 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1711-2509_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:02:53 2019