! Started logfile: J1710-0355_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:53:48 2019 obs J1710-0355_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1710-0355_S_2017_05_31_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.949459 visibilities/baseline/integration-bin. ! Found source: J1710-0355 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 19312 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1710-0355_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 31 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 134 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 521 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.853675Jy sigma=0.007145 ! Fit after self-cal, rms=0.841869Jy sigma=0.007057 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=7.337 mas, bpa=-5.338 degrees ! Estimated noise=1070.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116232 Jy ! Component: 100 - total flux cleaned = 0.16186 Jy ! Total flux subtracted in 100 components = 0.16186 Jy ! Clean residual min=-0.007039 max=0.022023 Jy/beam ! Clean residual mean=0.000044 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.16186 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.16186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142373Jy sigma=0.000814 ! Fit after self-cal, rms=0.142083Jy sigma=0.000812 ! Inverting map ! Added new window around map position (2.5, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260917 Jy ! Component: 100 - total flux cleaned = 0.0430187 Jy ! Total flux subtracted in 100 components = 0.0430187 Jy ! Clean residual min=-0.005473 max=0.009846 Jy/beam ! Clean residual mean=0.000022 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.204879 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 44 components and 0.204879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133050Jy sigma=0.000723 ! Fit after self-cal, rms=0.133003Jy sigma=0.000722 ! Inverting map ! Added new window around map position (1.5, 7.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118858 Jy ! Component: 100 - total flux cleaned = 0.0204414 Jy ! Total flux subtracted in 100 components = 0.0204414 Jy ! Clean residual min=-0.004713 max=0.006775 Jy/beam ! Clean residual mean=0.000012 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.22532 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 66 components and 0.22532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130462Jy sigma=0.000701 ! Fit after self-cal, rms=0.130432Jy sigma=0.000701 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=8.288 mas, bpa=-4.783 degrees ! Estimated noise=721.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103897 Jy ! Component: 100 - total flux cleaned = 0.0168255 Jy ! Component: 150 - total flux cleaned = 0.0210213 Jy ! Component: 200 - total flux cleaned = 0.0235934 Jy ! Total flux subtracted in 200 components = 0.0235934 Jy ! Clean residual min=-0.003307 max=0.004080 Jy/beam ! Clean residual mean=0.000002 rms=0.000830 Jy/beam ! Combined flux in latest and established models = 0.248913 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 106 components and 0.248913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128699Jy sigma=0.000692 ! Fit after self-cal, rms=0.128669Jy sigma=0.000692 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 HN 1.00 KP 1.04 ! LA 1.00 MK 1.13 NL 0.96 OV 1.02 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.96 HN 1.07 KP 1.00 ! LA 0.98 MK 0.99 NL 1.07 OV 1.05 ! PT 1.02 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.01 KP 1.07 ! LA 1.02 MK 1.00 NL 1.01 OV 0.98 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00 KP 0.64 ! LA 0.97 MK 0.86 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.128669Jy sigma=0.000692 ! Fit after self-cal, rms=0.106306Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.334 mas, bpa=-4.952 degrees ! Estimated noise=728.248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217068 Jy ! Component: 100 - total flux cleaned = 0.00337908 Jy ! Component: 150 - total flux cleaned = 0.00371373 Jy ! Component: 200 - total flux cleaned = 0.00387402 Jy ! Total flux subtracted in 200 components = 0.00387402 Jy ! Clean residual min=-0.002633 max=0.002562 Jy/beam ! Clean residual mean=0.000004 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.252787 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 0.252787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106166Jy sigma=0.000684 ! Fit after self-cal, rms=0.106143Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106143Jy sigma=0.000684 ! Fit after self-cal, rms=0.098554Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.339 mas, bpa=-4.877 degrees ! Estimated noise=734.254 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156104 Jy ! Component: 100 - total flux cleaned = 0.00214802 Jy ! Component: 150 - total flux cleaned = 0.00232078 Jy ! Component: 200 - total flux cleaned = 0.00242159 Jy ! Total flux subtracted in 200 components = 0.00242159 Jy ! Clean residual min=-0.001979 max=0.002076 Jy/beam ! Clean residual mean=-0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.255209 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 133 components and 0.255209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098478Jy sigma=0.000676 ! Fit after self-cal, rms=0.098449Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.46103e-05 Jy ! Component: 100 - total flux cleaned = 7.45799e-05 Jy ! Component: 150 - total flux cleaned = 6.02387e-05 Jy ! Component: 200 - total flux cleaned = 4.62259e-05 Jy ! Total flux subtracted in 200 components = 4.62259e-05 Jy ! Clean residual min=-0.002039 max=0.002081 Jy/beam ! Clean residual mean=-0.000004 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.255255 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 142 components and 0.255255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098431Jy sigma=0.000676 ! Fit after self-cal, rms=0.098430Jy sigma=0.000676 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098430Jy sigma=0.000676 ! Fit after self-cal, rms=0.095863Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.174 mas, bmaj=8.346 mas, bpa=-4.865 degrees ! Estimated noise=736.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361783 Jy ! Component: 100 - total flux cleaned = 0.000401149 Jy ! Component: 150 - total flux cleaned = 0.000387007 Jy ! Component: 200 - total flux cleaned = 0.00037341 Jy ! Total flux subtracted in 200 components = 0.00037341 Jy ! Clean residual min=-0.001965 max=0.001968 Jy/beam ! Clean residual mean=-0.000005 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.255629 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 150 components and 0.255629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095846Jy sigma=0.000673 ! Fit after self-cal, rms=0.095823Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.31236e-05 Jy ! Component: 100 - total flux cleaned = -3.67119e-05 Jy ! Component: 150 - total flux cleaned = -6.21752e-05 Jy ! Component: 200 - total flux cleaned = -8.59132e-05 Jy ! Total flux subtracted in 200 components = -8.59132e-05 Jy ! Clean residual min=-0.001975 max=0.001958 Jy/beam ! Clean residual mean=-0.000005 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.255543 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 154 components and 0.255543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095814Jy sigma=0.000673 ! Fit after self-cal, rms=0.095814Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095814Jy sigma=0.000673 ! Fit after self-cal, rms=0.096188Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.641 mas, bmaj=14.41 mas, bpa=-3.757 degrees ! Estimated noise=931.768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000383917 Jy ! Component: 100 - total flux cleaned = 0.000410441 Jy ! Component: 150 - total flux cleaned = 0.000411256 Jy ! Component: 200 - total flux cleaned = 0.000377119 Jy ! Total flux subtracted in 200 components = 0.000377119 Jy ! Clean residual min=-0.002010 max=0.001849 Jy/beam ! Clean residual mean=-0.000009 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.25592 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 158 components and 0.25592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096172Jy sigma=0.000673 ! Fit after self-cal, rms=0.096172Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122983 Jy ! Component: 100 - total flux cleaned = -0.000122748 Jy ! Component: 150 - total flux cleaned = -0.000122544 Jy ! Component: 200 - total flux cleaned = -0.000149083 Jy ! Total flux subtracted in 200 components = -0.000149083 Jy ! Clean residual min=-0.001967 max=0.001837 Jy/beam ! Clean residual mean=-0.000009 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.255771 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 163 components and 0.255771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096165Jy sigma=0.000673 ! Fit after self-cal, rms=0.096164Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=8.353 mas, bpa=-4.869 degrees ! Estimated noise=739.282 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.177 x 8.353 at -4.869 degrees (North through East) ! Clean map min=-0.0018558 max=0.15419 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=7.392 mas, bpa=-5.516 degrees ! Estimated noise=1094.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1186 Jy ! Component: 100 - total flux cleaned = 0.165189 Jy ! Component: 150 - total flux cleaned = 0.191212 Jy ! Component: 200 - total flux cleaned = 0.208387 Jy ! Total flux subtracted in 200 components = 0.208387 Jy ! Clean residual min=-0.004644 max=0.009259 Jy/beam ! Clean residual mean=0.000022 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.208387 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.208387 Jy ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=8.353 mas, bpa=-4.869 degrees ! Estimated noise=739.282 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182026 Jy ! Component: 100 - total flux cleaned = 0.0291184 Jy ! Component: 150 - total flux cleaned = 0.0359538 Jy ! Component: 200 - total flux cleaned = 0.0403515 Jy ! Total flux subtracted in 200 components = 0.0403515 Jy ! Clean residual min=-0.002090 max=0.003501 Jy/beam ! Clean residual mean=0.000000 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.248739 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 103 components and 0.248739 Jy ! Inverting map ! Added new window around map position (-3.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327964 Jy ! Component: 100 - total flux cleaned = 0.00521793 Jy ! Component: 150 - total flux cleaned = 0.00630051 Jy ! Component: 200 - total flux cleaned = 0.00642998 Jy ! Total flux subtracted in 200 components = 0.00642998 Jy ! Clean residual min=-0.002069 max=0.001939 Jy/beam ! Clean residual mean=-0.000004 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.255169 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 126 components and 0.255169 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.641 mas, bmaj=14.41 mas, bpa=-3.757 degrees ! Estimated noise=931.768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000915629 Jy ! Component: 100 - total flux cleaned = 0.00103675 Jy ! Component: 150 - total flux cleaned = 0.00106983 Jy ! Component: 200 - total flux cleaned = 0.00100962 Jy ! Total flux subtracted in 200 components = 0.00100962 Jy ! Clean residual min=-0.001765 max=0.001937 Jy/beam ! Clean residual mean=-0.000009 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.256178 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.4095e-05 Jy ! Component: 100 - total flux cleaned = -7.87526e-05 Jy ! Component: 150 - total flux cleaned = -0.000124764 Jy ! Component: 200 - total flux cleaned = -0.000145157 Jy ! Total flux subtracted in 200 components = -0.000145157 Jy ! Clean residual min=-0.001757 max=0.001945 Jy/beam ! Clean residual mean=-0.000009 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.256033 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 144 components and 0.256033 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=8.353 mas, bpa=-4.869 degrees ! Estimated noise=739.282 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014273 Jy ! Component: 100 - total flux cleaned = -0.000207224 Jy ! Component: 150 - total flux cleaned = -0.000208344 Jy ! Component: 200 - total flux cleaned = -0.000229792 Jy ! Total flux subtracted in 200 components = -0.000229792 Jy ! Clean residual min=-0.001999 max=0.001851 Jy/beam ! Clean residual mean=-0.000004 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.255803 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 159 components and 0.255803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096111Jy sigma=0.000673 ! Fit after self-cal, rms=0.096104Jy sigma=0.000673 wmodel J1710-0355_S_2017_05_31_pus_map.mod ! Writing 159 model components to file: J1710-0355_S_2017_05_31_pus_map.mod wobs J1710-0355_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1710-0355_S_2017_05_31_pus_uvs.fits wwins J1710-0355_S_2017_05_31_pus_map.win ! wwins: Wrote 4 windows to J1710-0355_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.48268e-05 Jy ! Component: 100 - total flux cleaned = 3.86405e-05 Jy ! Component: 150 - total flux cleaned = -1.97733e-05 Jy ! Component: 200 - total flux cleaned = -0.000105073 Jy ! Component: 250 - total flux cleaned = -0.000189096 Jy ! Component: 300 - total flux cleaned = -0.000326061 Jy ! Component: 350 - total flux cleaned = -0.000459597 Jy ! Component: 400 - total flux cleaned = -0.00066873 Jy ! Component: 450 - total flux cleaned = -0.000797145 Jy ! Component: 500 - total flux cleaned = -0.000923619 Jy ! Component: 550 - total flux cleaned = -0.0010974 Jy ! Component: 600 - total flux cleaned = -0.00126806 Jy ! Component: 650 - total flux cleaned = -0.00129175 Jy ! Component: 700 - total flux cleaned = -0.00138666 Jy ! Component: 750 - total flux cleaned = -0.00152683 Jy ! Component: 800 - total flux cleaned = -0.00159566 Jy ! Component: 850 - total flux cleaned = -0.00170981 Jy ! Component: 900 - total flux cleaned = -0.00186689 Jy ! Component: 950 - total flux cleaned = -0.00197763 Jy ! Component: 1000 - total flux cleaned = -0.00204367 Jy ! Component: 1050 - total flux cleaned = -0.00213077 Jy ! Component: 1100 - total flux cleaned = -0.00234497 Jy ! Component: 1150 - total flux cleaned = -0.00234448 Jy ! Component: 1200 - total flux cleaned = -0.00240758 Jy ! Component: 1250 - total flux cleaned = -0.00251162 Jy ! Component: 1300 - total flux cleaned = -0.00261446 Jy ! Component: 1350 - total flux cleaned = -0.00271587 Jy ! Component: 1400 - total flux cleaned = -0.00273625 Jy ! Component: 1450 - total flux cleaned = -0.00283589 Jy ! Component: 1500 - total flux cleaned = -0.00293447 Jy ! Component: 1550 - total flux cleaned = -0.00301273 Jy ! Component: 1600 - total flux cleaned = -0.00309045 Jy ! Component: 1650 - total flux cleaned = -0.00316732 Jy ! Component: 1700 - total flux cleaned = -0.00330072 Jy ! Component: 1750 - total flux cleaned = -0.00335735 Jy ! Component: 1800 - total flux cleaned = -0.00348831 Jy ! Component: 1850 - total flux cleaned = -0.00352549 Jy ! Component: 1900 - total flux cleaned = -0.00363619 Jy ! Component: 1950 - total flux cleaned = -0.00378233 Jy ! Component: 2000 - total flux cleaned = -0.00376426 Jy ! Component: 2050 - total flux cleaned = -0.00381802 Jy ! Component: 2100 - total flux cleaned = -0.00392528 Jy ! Component: 2150 - total flux cleaned = -0.00392502 Jy ! Component: 2200 - total flux cleaned = -0.00390756 Jy ! Component: 2250 - total flux cleaned = -0.00406455 Jy ! Component: 2300 - total flux cleaned = -0.00404727 Jy ! Component: 2350 - total flux cleaned = -0.00408167 Jy ! Component: 2400 - total flux cleaned = -0.0041328 Jy ! Component: 2450 - total flux cleaned = -0.00421759 Jy ! Component: 2500 - total flux cleaned = -0.00430153 Jy ! Component: 2550 - total flux cleaned = -0.00433495 Jy ! Component: 2600 - total flux cleaned = -0.00443437 Jy ! Component: 2650 - total flux cleaned = -0.00445073 Jy ! Component: 2700 - total flux cleaned = -0.00453244 Jy ! Component: 2750 - total flux cleaned = -0.00454844 Jy ! Component: 2800 - total flux cleaned = -0.00454854 Jy ! Component: 2850 - total flux cleaned = -0.00462896 Jy ! Component: 2900 - total flux cleaned = -0.00474027 Jy ! Component: 2950 - total flux cleaned = -0.00472439 Jy ! Component: 3000 - total flux cleaned = -0.0047558 Jy ! Component: 3050 - total flux cleaned = -0.00477141 Jy ! Component: 3100 - total flux cleaned = -0.00472483 Jy ! Component: 3150 - total flux cleaned = -0.00481748 Jy ! Component: 3200 - total flux cleaned = -0.00475611 Jy ! Component: 3250 - total flux cleaned = -0.00480199 Jy ! Component: 3300 - total flux cleaned = -0.00483234 Jy ! Component: 3350 - total flux cleaned = -0.00489247 Jy ! Component: 3400 - total flux cleaned = -0.00496742 Jy ! Component: 3450 - total flux cleaned = -0.00493763 Jy ! Component: 3500 - total flux cleaned = -0.00504126 Jy ! Component: 3550 - total flux cleaned = -0.00501192 Jy ! Component: 3600 - total flux cleaned = -0.00512901 Jy ! Component: 3650 - total flux cleaned = -0.00512898 Jy ! Component: 3700 - total flux cleaned = -0.00517246 Jy ! Component: 3750 - total flux cleaned = -0.00520132 Jy ! Component: 3800 - total flux cleaned = -0.00523 Jy ! Component: 3850 - total flux cleaned = -0.0053012 Jy ! Component: 3900 - total flux cleaned = -0.0053578 Jy ! Component: 3950 - total flux cleaned = -0.00541408 Jy ! Component: 4000 - total flux cleaned = -0.0054142 Jy ! Component: 4050 - total flux cleaned = -0.00545599 Jy ! Total flux subtracted in 4096 components = -0.00551139 Jy ! Clean residual min=-0.000864 max=0.000756 Jy/beam ! Clean residual mean=-0.000000 rms=0.000261 Jy/beam ! Combined flux in latest and established models = 0.250292 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 445 components and 0.250292 Jy ![Exited script file: muppet] wmap "J1710-0355_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.177 x 8.353 at -4.869 degrees (North through East) ! Clean map min=-0.0018518 max=0.15494 Jy/beam ! Writing clean map to FITS file: J1710-0355_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.154939 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000259177 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.50183 0.50183 1.00366 2.00732 4.01464 8.02929 16.0586 32.1171 64.2343 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.154 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.177 x 8.353 at -4.869 degrees (North through East) ! Clean map min=-0.0018518 max=0.15494 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1710-0355_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:53:53 2019