! Started logfile: J1709-1728_S_2017_08_12_pus_uvs.log on Fri May 10 15:04:03 2019 obs J1709-1728_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1709-1728_S_2017_08_12_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.42735 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1709-1728 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1709-1728_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.718768Jy sigma=0.005629 ! Fit after self-cal, rms=0.686172Jy sigma=0.005381 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=11.04 mas, bpa=5.301 degrees ! Estimated noise=3906.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.241289 Jy ! Component: 100 - total flux cleaned = 0.303342 Jy ! Total flux subtracted in 100 components = 0.303342 Jy ! Clean residual min=-0.014853 max=0.026264 Jy/beam ! Clean residual mean=0.000075 rms=0.006640 Jy/beam ! Combined flux in latest and established models = 0.303342 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.303342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101071Jy sigma=0.000775 ! Fit after self-cal, rms=0.101003Jy sigma=0.000774 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.63 mas, bmaj=11.37 mas, bpa=7.259 degrees ! Estimated noise=3317.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0374141 Jy ! Component: 100 - total flux cleaned = 0.057395 Jy ! Component: 150 - total flux cleaned = 0.0691148 Jy ! Component: 200 - total flux cleaned = 0.0761058 Jy ! Total flux subtracted in 200 components = 0.0761058 Jy ! Clean residual min=-0.007486 max=0.009129 Jy/beam ! Clean residual mean=0.000018 rms=0.002323 Jy/beam ! Combined flux in latest and established models = 0.379448 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 57 components and 0.379448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086268Jy sigma=0.000661 ! Fit after self-cal, rms=0.086230Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.97 KP 1.06 ! LA 0.99 MK 1.00* NL 0.91 OV 1.01 ! PT 1.03 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.06 KP 1.03 ! LA 0.95 MK 1.00* NL 1.01 OV 1.02 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.06 KP 0.98 ! LA 1.02 MK 1.00* NL 0.98 OV 0.95 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.086230Jy sigma=0.000661 ! Fit after self-cal, rms=0.083996Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.647 mas, bmaj=11.42 mas, bpa=7.327 degrees ! Estimated noise=3297.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222625 Jy ! Component: 100 - total flux cleaned = 0.00265666 Jy ! Component: 150 - total flux cleaned = 0.00283108 Jy ! Component: 200 - total flux cleaned = 0.00294672 Jy ! Total flux subtracted in 200 components = 0.00294672 Jy ! Clean residual min=-0.006788 max=0.007924 Jy/beam ! Clean residual mean=-0.000004 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 0.382395 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 79 components and 0.382395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083925Jy sigma=0.000645 ! Fit after self-cal, rms=0.083935Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083935Jy sigma=0.000645 ! Fit after self-cal, rms=0.083900Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=11.4 mas, bpa=7.31 degrees ! Estimated noise=3297.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136986 Jy ! Component: 100 - total flux cleaned = 0.00148014 Jy ! Component: 150 - total flux cleaned = 0.00151608 Jy ! Component: 200 - total flux cleaned = 0.00158132 Jy ! Total flux subtracted in 200 components = 0.00158132 Jy ! Clean residual min=-0.006729 max=0.007919 Jy/beam ! Clean residual mean=-0.000003 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.383976 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.383976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083865Jy sigma=0.000645 ! Fit after self-cal, rms=0.083866Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-123.5, 30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518204 Jy ! Component: 100 - total flux cleaned = 0.00535076 Jy ! Component: 150 - total flux cleaned = 0.00525979 Jy ! Component: 200 - total flux cleaned = 0.00478889 Jy ! Total flux subtracted in 200 components = 0.00478889 Jy ! Clean residual min=-0.005864 max=0.005386 Jy/beam ! Clean residual mean=0.000001 rms=0.001505 Jy/beam ! Combined flux in latest and established models = 0.388765 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 0.388765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083159Jy sigma=0.000639 ! Fit after self-cal, rms=0.083133Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083133Jy sigma=0.000639 ! Fit after self-cal, rms=0.082614Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.646 mas, bmaj=11.38 mas, bpa=7.271 degrees ! Estimated noise=3280.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.85785e-05 Jy ! Component: 100 - total flux cleaned = 0.000259735 Jy ! Component: 150 - total flux cleaned = 0.000550732 Jy ! Component: 200 - total flux cleaned = 0.00048486 Jy ! Total flux subtracted in 200 components = 0.00048486 Jy ! Clean residual min=-0.005741 max=0.005218 Jy/beam ! Clean residual mean=-0.000004 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.38925 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 128 components and 0.38925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082445Jy sigma=0.000637 ! Fit after self-cal, rms=0.082431Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00075326 Jy ! Component: 100 - total flux cleaned = -0.000805883 Jy ! Component: 150 - total flux cleaned = -0.000756152 Jy ! Component: 200 - total flux cleaned = -0.000802836 Jy ! Total flux subtracted in 200 components = -0.000802836 Jy ! Clean residual min=-0.005624 max=0.005025 Jy/beam ! Clean residual mean=-0.000005 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.388447 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 136 components and 0.388447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082370Jy sigma=0.000637 ! Fit after self-cal, rms=0.082365Jy sigma=0.000637 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082365Jy sigma=0.000637 ! Fit after self-cal, rms=0.082115Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.914 mas, bmaj=15.87 mas, bpa=-5.201 degrees ! Estimated noise=4115.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000627451 Jy ! Component: 100 - total flux cleaned = -0.000717148 Jy ! Component: 150 - total flux cleaned = -0.000843707 Jy ! Component: 200 - total flux cleaned = -0.00100001 Jy ! Total flux subtracted in 200 components = -0.00100001 Jy ! Clean residual min=-0.004628 max=0.004778 Jy/beam ! Clean residual mean=-0.000010 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 0.387447 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 142 components and 0.387447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082095Jy sigma=0.000636 ! Fit after self-cal, rms=0.082091Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000429416 Jy ! Component: 100 - total flux cleaned = -0.000605602 Jy ! Component: 150 - total flux cleaned = -0.000803723 Jy ! Component: 200 - total flux cleaned = -0.000928658 Jy ! Total flux subtracted in 200 components = -0.000928658 Jy ! Clean residual min=-0.004319 max=0.004576 Jy/beam ! Clean residual mean=-0.000009 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.386519 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 145 components and 0.386519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082076Jy sigma=0.000636 ! Fit after self-cal, rms=0.082074Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.643 mas, bmaj=11.36 mas, bpa=7.268 degrees ! Estimated noise=3270.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.643 x 11.36 at 7.268 degrees (North through East) ! Clean map min=-0.0048321 max=0.31197 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=11.06 mas, bpa=5.269 degrees ! Estimated noise=3830.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236559 Jy ! Component: 100 - total flux cleaned = 0.296702 Jy ! Component: 150 - total flux cleaned = 0.324977 Jy ! Component: 200 - total flux cleaned = 0.342757 Jy ! Total flux subtracted in 200 components = 0.342757 Jy ! Clean residual min=-0.009685 max=0.012001 Jy/beam ! Clean residual mean=0.000034 rms=0.003189 Jy/beam ! Combined flux in latest and established models = 0.342757 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.342757 Jy ! Inverting map and beam ! Estimated beam: bmin=3.643 mas, bmaj=11.36 mas, bpa=7.268 degrees ! Estimated noise=3270.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171464 Jy ! Component: 100 - total flux cleaned = 0.0278094 Jy ! Component: 150 - total flux cleaned = 0.0318838 Jy ! Component: 200 - total flux cleaned = 0.0351111 Jy ! Total flux subtracted in 200 components = 0.0351111 Jy ! Clean residual min=-0.005964 max=0.006027 Jy/beam ! Clean residual mean=0.000015 rms=0.001741 Jy/beam ! Combined flux in latest and established models = 0.377868 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 89 components and 0.377868 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.914 mas, bmaj=15.87 mas, bpa=-5.201 degrees ! Estimated noise=4115.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058774 Jy ! Component: 100 - total flux cleaned = 0.00665155 Jy ! Component: 150 - total flux cleaned = 0.00743307 Jy ! Component: 200 - total flux cleaned = 0.0078148 Jy ! Total flux subtracted in 200 components = 0.0078148 Jy ! Clean residual min=-0.004674 max=0.004438 Jy/beam ! Clean residual mean=-0.000005 rms=0.001585 Jy/beam ! Combined flux in latest and established models = 0.385683 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.14623e-05 Jy ! Component: 100 - total flux cleaned = 5.79467e-06 Jy ! Component: 150 - total flux cleaned = -3.87064e-05 Jy ! Component: 200 - total flux cleaned = -3.56757e-05 Jy ! Total flux subtracted in 200 components = -3.56757e-05 Jy ! Clean residual min=-0.004420 max=0.004368 Jy/beam ! Clean residual mean=-0.000008 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 0.385647 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 134 components and 0.385647 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.643 mas, bmaj=11.36 mas, bpa=7.268 degrees ! Estimated noise=3270.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00041289 Jy ! Component: 100 - total flux cleaned = 0.00115144 Jy ! Component: 150 - total flux cleaned = 0.00151622 Jy ! Component: 200 - total flux cleaned = 0.00164834 Jy ! Total flux subtracted in 200 components = 0.00164834 Jy ! Clean residual min=-0.005347 max=0.004412 Jy/beam ! Clean residual mean=-0.000004 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.387296 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 152 components and 0.387295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082102Jy sigma=0.000636 ! Fit after self-cal, rms=0.082094Jy sigma=0.000636 wmodel J1709-1728_S_2017_08_12_pus_map.mod ! Writing 152 model components to file: J1709-1728_S_2017_08_12_pus_map.mod wobs J1709-1728_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1709-1728_S_2017_08_12_pus_uvs.fits wwins J1709-1728_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J1709-1728_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000846547 Jy ! Component: 100 - total flux cleaned = -0.000836242 Jy ! Component: 150 - total flux cleaned = -0.0013948 Jy ! Component: 200 - total flux cleaned = -0.00185252 Jy ! Component: 250 - total flux cleaned = -0.00206562 Jy ! Component: 300 - total flux cleaned = -0.00231629 Jy ! Component: 350 - total flux cleaned = -0.00274622 Jy ! Component: 400 - total flux cleaned = -0.00306596 Jy ! Component: 450 - total flux cleaned = -0.00350215 Jy ! Component: 500 - total flux cleaned = -0.00396237 Jy ! Component: 550 - total flux cleaned = -0.00440622 Jy ! Component: 600 - total flux cleaned = -0.00483448 Jy ! Component: 650 - total flux cleaned = -0.00521022 Jy ! Component: 700 - total flux cleaned = -0.00553671 Jy ! Component: 750 - total flux cleaned = -0.00592337 Jy ! Component: 800 - total flux cleaned = -0.00636527 Jy ! Component: 850 - total flux cleaned = -0.00672807 Jy ! Component: 900 - total flux cleaned = -0.00714447 Jy ! Component: 950 - total flux cleaned = -0.00739402 Jy ! Component: 1000 - total flux cleaned = -0.00766824 Jy ! Component: 1050 - total flux cleaned = -0.00796487 Jy ! Component: 1100 - total flux cleaned = -0.00819671 Jy ! Component: 1150 - total flux cleaned = -0.0084226 Jy ! Component: 1200 - total flux cleaned = -0.00853278 Jy ! Component: 1250 - total flux cleaned = -0.00853298 Jy ! Component: 1300 - total flux cleaned = -0.00850691 Jy ! Component: 1350 - total flux cleaned = -0.00855873 Jy ! Component: 1400 - total flux cleaned = -0.00860926 Jy ! Component: 1450 - total flux cleaned = -0.00868407 Jy ! Component: 1500 - total flux cleaned = -0.00873311 Jy ! Component: 1550 - total flux cleaned = -0.00875754 Jy ! Component: 1600 - total flux cleaned = -0.0088055 Jy ! Component: 1650 - total flux cleaned = -0.00875894 Jy ! Component: 1700 - total flux cleaned = -0.00875886 Jy ! Component: 1750 - total flux cleaned = -0.00871268 Jy ! Component: 1800 - total flux cleaned = -0.00862154 Jy ! Component: 1850 - total flux cleaned = -0.00857663 Jy ! Component: 1900 - total flux cleaned = -0.00853194 Jy ! Component: 1950 - total flux cleaned = -0.00846534 Jy ! Component: 2000 - total flux cleaned = -0.0083333 Jy ! Component: 2050 - total flux cleaned = -0.00826769 Jy ! Component: 2100 - total flux cleaned = -0.00818069 Jy ! Component: 2150 - total flux cleaned = -0.00813737 Jy ! Component: 2200 - total flux cleaned = -0.00809416 Jy ! Component: 2250 - total flux cleaned = -0.00800818 Jy ! Component: 2300 - total flux cleaned = -0.00796525 Jy ! Component: 2350 - total flux cleaned = -0.00790153 Jy ! Component: 2400 - total flux cleaned = -0.00783798 Jy ! Component: 2450 - total flux cleaned = -0.00775294 Jy ! Component: 2500 - total flux cleaned = -0.00766775 Jy ! Component: 2550 - total flux cleaned = -0.00762528 Jy ! Component: 2600 - total flux cleaned = -0.0075824 Jy ! Component: 2650 - total flux cleaned = -0.00753962 Jy ! Component: 2700 - total flux cleaned = -0.00749657 Jy ! Component: 2750 - total flux cleaned = -0.00747493 Jy ! Component: 2800 - total flux cleaned = -0.00740979 Jy ! Component: 2850 - total flux cleaned = -0.007388 Jy ! Component: 2900 - total flux cleaned = -0.00730015 Jy ! Component: 2950 - total flux cleaned = -0.00723396 Jy ! Component: 3000 - total flux cleaned = -0.00721169 Jy ! Component: 3050 - total flux cleaned = -0.00714427 Jy ! Component: 3100 - total flux cleaned = -0.0070991 Jy ! Component: 3150 - total flux cleaned = -0.00703072 Jy ! Component: 3200 - total flux cleaned = -0.00693883 Jy ! Component: 3250 - total flux cleaned = -0.00691551 Jy ! Component: 3300 - total flux cleaned = -0.00684527 Jy ! Component: 3350 - total flux cleaned = -0.00684536 Jy ! Component: 3400 - total flux cleaned = -0.00686946 Jy ! Component: 3450 - total flux cleaned = -0.00686951 Jy ! Component: 3500 - total flux cleaned = -0.00689387 Jy ! Component: 3550 - total flux cleaned = -0.00691905 Jy ! Component: 3600 - total flux cleaned = -0.00691934 Jy ! Component: 3650 - total flux cleaned = -0.00694534 Jy ! Component: 3700 - total flux cleaned = -0.00694568 Jy ! Component: 3750 - total flux cleaned = -0.00697275 Jy ! Component: 3800 - total flux cleaned = -0.00700025 Jy ! Component: 3850 - total flux cleaned = -0.00705608 Jy ! Component: 3900 - total flux cleaned = -0.00708478 Jy ! Component: 3950 - total flux cleaned = -0.007143 Jy ! Component: 4000 - total flux cleaned = -0.00717291 Jy ! Component: 4050 - total flux cleaned = -0.00720339 Jy ! Total flux subtracted in 4096 components = -0.00723475 Jy ! Clean residual min=-0.001601 max=0.001696 Jy/beam ! Clean residual mean=-0.000003 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.380061 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 389 components and 0.38006 Jy ![Exited script file: muppet] wmap "J1709-1728_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.643 x 11.36 at 7.268 degrees (North through East) ! Clean map min=-0.00483 max=0.31168 Jy/beam ! Writing clean map to FITS file: J1709-1728_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.311678 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000537453 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.517317 0.517317 1.03463 2.06927 4.13853 8.27706 16.5541 33.1083 66.2165 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.311 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.643 x 11.36 at 7.268 degrees (North through East) ! Clean map min=-0.00483 max=0.31168 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1709-1728_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:04:07 2019