! Started logfile: J1709-1728_S_2017_07_09_pus_uvs.log on Wed May 8 14:53:48 2019 obs J1709-1728_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J1709-1728_S_2017_07_09_pus_uva.fits ! AN table 1: 9 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.407407 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1709-1728 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1709-1728_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.696428Jy sigma=0.005755 ! Fit after self-cal, rms=0.685614Jy sigma=0.005669 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.273 mas, bmaj=25.08 mas, bpa=-7.705 degrees ! Estimated noise=4379.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.23593 Jy ! Component: 100 - total flux cleaned = 0.300966 Jy ! Total flux subtracted in 100 components = 0.300966 Jy ! Clean residual min=-0.020387 max=0.034485 Jy/beam ! Clean residual mean=0.001110 rms=0.008469 Jy/beam ! Combined flux in latest and established models = 0.300966 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.300966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104958Jy sigma=0.000811 ! Fit after self-cal, rms=0.104856Jy sigma=0.000810 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.885 mas, bmaj=24.3 mas, bpa=-7.528 degrees ! Estimated noise=4033.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375586 Jy ! Component: 100 - total flux cleaned = 0.0578621 Jy ! Component: 150 - total flux cleaned = 0.0713445 Jy ! Component: 200 - total flux cleaned = 0.0807792 Jy ! Total flux subtracted in 200 components = 0.0807792 Jy ! Clean residual min=-0.013537 max=0.020311 Jy/beam ! Clean residual mean=0.000802 rms=0.005324 Jy/beam ! Combined flux in latest and established models = 0.381745 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 75 components and 0.381745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089861Jy sigma=0.000686 ! Fit after self-cal, rms=0.089690Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.95 ! LA 0.97 MK 1.05 NL 1.00* OV 0.97 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.92 ! LA 0.93 MK 1.00 NL 1.31 OV 1.07 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 0.91 ! LA 0.92 MK 1.06 NL 1.15 OV 0.96 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.089690Jy sigma=0.000685 ! Fit after self-cal, rms=0.083309Jy sigma=0.000628 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.042 mas, bmaj=24.17 mas, bpa=-7.669 degrees ! Estimated noise=4161.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299933 Jy ! Component: 100 - total flux cleaned = -0.00029891 Jy ! Component: 150 - total flux cleaned = -0.000461132 Jy ! Component: 200 - total flux cleaned = -0.000678558 Jy ! Total flux subtracted in 200 components = -0.000678558 Jy ! Clean residual min=-0.007799 max=0.006415 Jy/beam ! Clean residual mean=0.000004 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 0.381067 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 0.381067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083024Jy sigma=0.000625 ! Fit after self-cal, rms=0.083082Jy sigma=0.000625 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083082Jy sigma=0.000625 ! Fit after self-cal, rms=0.083055Jy sigma=0.000625 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.033 mas, bmaj=24.21 mas, bpa=-7.686 degrees ! Estimated noise=4151.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0015483 Jy ! Component: 100 - total flux cleaned = -0.00167774 Jy ! Component: 150 - total flux cleaned = -0.00173403 Jy ! Component: 200 - total flux cleaned = -0.00183803 Jy ! Total flux subtracted in 200 components = -0.00183803 Jy ! Clean residual min=-0.007274 max=0.005975 Jy/beam ! Clean residual mean=-0.000000 rms=0.002169 Jy/beam ! Combined flux in latest and established models = 0.379228 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 92 components and 0.379228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082930Jy sigma=0.000624 ! Fit after self-cal, rms=0.082925Jy sigma=0.000624 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00039606 Jy ! Component: 100 - total flux cleaned = -0.000397312 Jy ! Component: 150 - total flux cleaned = -0.000440515 Jy ! Component: 200 - total flux cleaned = -0.000478397 Jy ! Total flux subtracted in 200 components = -0.000478397 Jy ! Clean residual min=-0.007135 max=0.005948 Jy/beam ! Clean residual mean=0.000007 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.37875 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 108 components and 0.37875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082871Jy sigma=0.000624 ! Fit after self-cal, rms=0.082867Jy sigma=0.000624 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082867Jy sigma=0.000624 ! Fit after self-cal, rms=0.082955Jy sigma=0.000624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.027 mas, bmaj=24.25 mas, bpa=-7.699 degrees ! Estimated noise=4147.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110705 Jy ! Component: 100 - total flux cleaned = -0.00110978 Jy ! Component: 150 - total flux cleaned = -0.00114861 Jy ! Component: 200 - total flux cleaned = -0.00118413 Jy ! Total flux subtracted in 200 components = -0.00118413 Jy ! Clean residual min=-0.007095 max=0.006105 Jy/beam ! Clean residual mean=-0.000012 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 0.377566 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 126 components and 0.377566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082897Jy sigma=0.000623 ! Fit after self-cal, rms=0.082899Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000238562 Jy ! Component: 100 - total flux cleaned = -0.000206943 Jy ! Component: 150 - total flux cleaned = -0.000238216 Jy ! Component: 200 - total flux cleaned = -0.000208087 Jy ! Total flux subtracted in 200 components = -0.000208087 Jy ! Clean residual min=-0.007033 max=0.006200 Jy/beam ! Clean residual mean=-0.000009 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 0.377358 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 133 components and 0.377358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082870Jy sigma=0.000623 ! Fit after self-cal, rms=0.082869Jy sigma=0.000623 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082869Jy sigma=0.000623 ! Fit after self-cal, rms=0.082886Jy sigma=0.000623 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.25 mas, bmaj=25.3 mas, bpa=3.432 degrees ! Estimated noise=5051.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000556228 Jy ! Component: 100 - total flux cleaned = -0.000777455 Jy ! Component: 150 - total flux cleaned = -0.000851065 Jy ! Component: 200 - total flux cleaned = -0.000916572 Jy ! Total flux subtracted in 200 components = -0.000916572 Jy ! Clean residual min=-0.006543 max=0.005921 Jy/beam ! Clean residual mean=-0.000028 rms=0.002031 Jy/beam ! Combined flux in latest and established models = 0.376441 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 148 components and 0.376441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082856Jy sigma=0.000623 ! Fit after self-cal, rms=0.082850Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274439 Jy ! Component: 100 - total flux cleaned = -0.000220471 Jy ! Component: 150 - total flux cleaned = -0.000195375 Jy ! Component: 200 - total flux cleaned = -0.000240323 Jy ! Total flux subtracted in 200 components = -0.000240323 Jy ! Clean residual min=-0.006551 max=0.005935 Jy/beam ! Clean residual mean=-0.000022 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.376201 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 162 components and 0.376201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082847Jy sigma=0.000623 ! Fit after self-cal, rms=0.082843Jy sigma=0.000623 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=24.28 mas, bpa=-7.71 degrees ! Estimated noise=4143.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.023 x 24.28 at -7.71 degrees (North through East) ! Clean map min=-0.0071391 max=0.30788 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=24.72 mas, bpa=-7.907 degrees ! Estimated noise=4505.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.240518 Jy ! Component: 100 - total flux cleaned = 0.304682 Jy ! Component: 150 - total flux cleaned = 0.333173 Jy ! Component: 200 - total flux cleaned = 0.347415 Jy ! Total flux subtracted in 200 components = 0.347415 Jy ! Clean residual min=-0.009656 max=0.009125 Jy/beam ! Clean residual mean=0.000282 rms=0.003034 Jy/beam ! Combined flux in latest and established models = 0.347415 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 0.347415 Jy ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=24.28 mas, bpa=-7.71 degrees ! Estimated noise=4143.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111629 Jy ! Component: 100 - total flux cleaned = 0.0178474 Jy ! Component: 150 - total flux cleaned = 0.0221787 Jy ! Component: 200 - total flux cleaned = 0.0250269 Jy ! Total flux subtracted in 200 components = 0.0250269 Jy ! Clean residual min=-0.007511 max=0.006170 Jy/beam ! Clean residual mean=0.000055 rms=0.002190 Jy/beam ! Combined flux in latest and established models = 0.372442 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 86 components and 0.372442 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.25 mas, bmaj=25.3 mas, bpa=3.432 degrees ! Estimated noise=5051.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244922 Jy ! Component: 100 - total flux cleaned = 0.00331717 Jy ! Component: 150 - total flux cleaned = 0.00331612 Jy ! Component: 200 - total flux cleaned = 0.0033549 Jy ! Total flux subtracted in 200 components = 0.0033549 Jy ! Clean residual min=-0.006684 max=0.005991 Jy/beam ! Clean residual mean=-0.000003 rms=0.002001 Jy/beam ! Combined flux in latest and established models = 0.375797 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.23521e-06 Jy ! Component: 100 - total flux cleaned = -4.87387e-07 Jy ! Component: 150 - total flux cleaned = 3.12195e-05 Jy ! Component: 200 - total flux cleaned = 4.98943e-07 Jy ! Total flux subtracted in 200 components = 4.98943e-07 Jy ! Clean residual min=-0.006459 max=0.005798 Jy/beam ! Clean residual mean=-0.000003 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.375797 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 120 components and 0.375797 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=24.28 mas, bpa=-7.71 degrees ! Estimated noise=4143.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106152 Jy ! Component: 100 - total flux cleaned = 0.000135279 Jy ! Component: 150 - total flux cleaned = 0.000163064 Jy ! Component: 200 - total flux cleaned = 0.000188141 Jy ! Total flux subtracted in 200 components = 0.000188141 Jy ! Clean residual min=-0.007013 max=0.006525 Jy/beam ! Clean residual mean=-0.000005 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.375986 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 134 components and 0.375986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082924Jy sigma=0.000623 ! Fit after self-cal, rms=0.082915Jy sigma=0.000623 wmodel J1709-1728_S_2017_07_09_pus_map.mod ! Writing 134 model components to file: J1709-1728_S_2017_07_09_pus_map.mod wobs J1709-1728_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J1709-1728_S_2017_07_09_pus_uvs.fits wwins J1709-1728_S_2017_07_09_pus_map.win ! wwins: Wrote 1 windows to J1709-1728_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00253146 Jy ! Component: 100 - total flux cleaned = -0.0042685 Jy ! Component: 150 - total flux cleaned = -0.00542076 Jy ! Component: 200 - total flux cleaned = -0.00638246 Jy ! Component: 250 - total flux cleaned = -0.00711096 Jy ! Component: 300 - total flux cleaned = -0.00726179 Jy ! Component: 350 - total flux cleaned = -0.00726294 Jy ! Component: 400 - total flux cleaned = -0.00733369 Jy ! Component: 450 - total flux cleaned = -0.00766087 Jy ! Component: 500 - total flux cleaned = -0.00778465 Jy ! Component: 550 - total flux cleaned = -0.0077245 Jy ! Component: 600 - total flux cleaned = -0.00772482 Jy ! Component: 650 - total flux cleaned = -0.00755742 Jy ! Component: 700 - total flux cleaned = -0.00739765 Jy ! Component: 750 - total flux cleaned = -0.00729479 Jy ! Component: 800 - total flux cleaned = -0.00704113 Jy ! Component: 850 - total flux cleaned = -0.00694272 Jy ! Component: 900 - total flux cleaned = -0.00665412 Jy ! Component: 950 - total flux cleaned = -0.00646634 Jy ! Component: 1000 - total flux cleaned = -0.00628303 Jy ! Component: 1050 - total flux cleaned = -0.00606075 Jy ! Component: 1100 - total flux cleaned = -0.00601666 Jy ! Component: 1150 - total flux cleaned = -0.0058877 Jy ! Component: 1200 - total flux cleaned = -0.00576106 Jy ! Component: 1250 - total flux cleaned = -0.00563628 Jy ! Component: 1300 - total flux cleaned = -0.00555426 Jy ! Component: 1350 - total flux cleaned = -0.00543321 Jy ! Component: 1400 - total flux cleaned = -0.0052342 Jy ! Component: 1450 - total flux cleaned = -0.00515589 Jy ! Component: 1500 - total flux cleaned = -0.00507822 Jy ! Component: 1550 - total flux cleaned = -0.00492467 Jy ! Component: 1600 - total flux cleaned = -0.00488652 Jy ! Component: 1650 - total flux cleaned = -0.00481172 Jy ! Component: 1700 - total flux cleaned = -0.00481145 Jy ! Component: 1750 - total flux cleaned = -0.00484866 Jy ! Component: 1800 - total flux cleaned = -0.00484872 Jy ! Component: 1850 - total flux cleaned = -0.00484877 Jy ! Component: 1900 - total flux cleaned = -0.00484914 Jy ! Component: 1950 - total flux cleaned = -0.00488608 Jy ! Component: 2000 - total flux cleaned = -0.00492321 Jy ! Component: 2050 - total flux cleaned = -0.00503344 Jy ! Component: 2100 - total flux cleaned = -0.00503342 Jy ! Component: 2150 - total flux cleaned = -0.00510718 Jy ! Component: 2200 - total flux cleaned = -0.00514397 Jy ! Component: 2250 - total flux cleaned = -0.00529277 Jy ! Component: 2300 - total flux cleaned = -0.00540539 Jy ! Component: 2350 - total flux cleaned = -0.00559499 Jy ! Component: 2400 - total flux cleaned = -0.00574861 Jy ! Component: 2450 - total flux cleaned = -0.00586585 Jy ! Component: 2500 - total flux cleaned = -0.00598523 Jy ! Component: 2550 - total flux cleaned = -0.0061477 Jy ! Component: 2600 - total flux cleaned = -0.0063127 Jy ! Component: 2650 - total flux cleaned = -0.00643919 Jy ! Component: 2700 - total flux cleaned = -0.00656759 Jy ! Component: 2750 - total flux cleaned = -0.00674202 Jy ! Component: 2800 - total flux cleaned = -0.00687553 Jy ! Component: 2850 - total flux cleaned = -0.00701189 Jy ! Component: 2900 - total flux cleaned = -0.00715157 Jy ! Component: 2950 - total flux cleaned = -0.00729395 Jy ! Component: 3000 - total flux cleaned = -0.00739061 Jy ! Component: 3050 - total flux cleaned = -0.00753887 Jy ! Component: 3100 - total flux cleaned = -0.00768997 Jy ! Component: 3150 - total flux cleaned = -0.00784485 Jy ! Component: 3200 - total flux cleaned = -0.00794996 Jy ! Component: 3250 - total flux cleaned = -0.00811131 Jy ! Component: 3300 - total flux cleaned = -0.00822148 Jy ! Component: 3350 - total flux cleaned = -0.00838974 Jy ! Component: 3400 - total flux cleaned = -0.00856279 Jy ! Component: 3450 - total flux cleaned = -0.00867932 Jy ! Component: 3500 - total flux cleaned = -0.00885874 Jy ! Component: 3550 - total flux cleaned = -0.00904243 Jy ! Component: 3600 - total flux cleaned = -0.0091675 Jy ! Component: 3650 - total flux cleaned = -0.00935845 Jy ! Component: 3700 - total flux cleaned = -0.00948964 Jy ! Component: 3750 - total flux cleaned = -0.00975593 Jy ! Component: 3800 - total flux cleaned = -0.00989354 Jy ! Component: 3850 - total flux cleaned = -0.0100346 Jy ! Component: 3900 - total flux cleaned = -0.0102489 Jy ! Component: 3950 - total flux cleaned = -0.0103954 Jy ! Component: 4000 - total flux cleaned = -0.0106205 Jy ! Component: 4050 - total flux cleaned = -0.0108508 Jy ! Total flux subtracted in 4096 components = -0.0109286 Jy ! Clean residual min=-0.004533 max=0.004680 Jy/beam ! Clean residual mean=-0.000074 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.365057 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 362 components and 0.365057 Jy ![Exited script file: muppet] wmap "J1709-1728_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.023 x 24.28 at -7.71 degrees (North through East) ! Clean map min=-0.010016 max=0.31683 Jy/beam ! Writing clean map to FITS file: J1709-1728_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.316827 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00150569 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42572 1.42572 2.85144 5.70289 11.4058 22.8115 45.6231 91.2462 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0045 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.316 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.023 x 24.28 at -7.71 degrees (North through East) ! Clean map min=-0.010016 max=0.31683 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1709-1728_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:53:52 2019