! Started logfile: J1709-1728_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:18:41 2019 obs J1709-1728_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1709-1728_S_2017_01_16_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.3 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1709-1728 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 432 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1709-1728_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.671525Jy sigma=0.003501 ! Fit after self-cal, rms=0.661182Jy sigma=0.003462 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.014 mas, bmaj=77.06 mas, bpa=38.86 degrees ! Estimated noise=8328.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273557 Jy ! Component: 100 - total flux cleaned = 0.346227 Jy ! Total flux subtracted in 100 components = 0.346227 Jy ! Clean residual min=-0.025597 max=0.033822 Jy/beam ! Clean residual mean=0.000799 rms=0.011358 Jy/beam ! Combined flux in latest and established models = 0.346227 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.346227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180056Jy sigma=0.000706 ! Fit after self-cal, rms=0.179941Jy sigma=0.000705 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.002 mas, bmaj=77.88 mas, bpa=38.26 degrees ! Estimated noise=6667.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0446498 Jy ! Component: 100 - total flux cleaned = 0.0721752 Jy ! Component: 150 - total flux cleaned = 0.07994 Jy ! Component: 200 - total flux cleaned = 0.0813596 Jy ! Total flux subtracted in 200 components = 0.0813596 Jy ! Clean residual min=-0.010649 max=0.010553 Jy/beam ! Clean residual mean=0.000541 rms=0.004364 Jy/beam ! Combined flux in latest and established models = 0.427587 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 85 components and 0.427587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162397Jy sigma=0.000611 ! Fit after self-cal, rms=0.162199Jy sigma=0.000610 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00* KP 0.97 ! LA 1.01 MK 1.00* NL 1.00* OV 0.96 ! PT 1.06 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.00* KP 0.95 ! LA 0.98 MK 1.00* NL 1.00* OV 1.01 ! PT 1.14 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.00* KP 1.07 ! LA 1.01 MK 1.00* NL 1.00* OV 0.99 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.95 HN 1.00* KP 0.69 ! LA 0.84 MK 1.00* NL 1.00* OV 0.98 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.162199Jy sigma=0.000610 ! Fit after self-cal, rms=0.130828Jy sigma=0.000592 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.078 mas, bmaj=76.82 mas, bpa=38.3 degrees ! Estimated noise=6578.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00904534 Jy ! Component: 100 - total flux cleaned = 0.0126253 Jy ! Component: 150 - total flux cleaned = 0.0159524 Jy ! Component: 200 - total flux cleaned = 0.0187275 Jy ! Total flux subtracted in 200 components = 0.0187275 Jy ! Clean residual min=-0.003996 max=0.004008 Jy/beam ! Clean residual mean=0.000243 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.446314 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 150 components and 0.446314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129312Jy sigma=0.000585 ! Fit after self-cal, rms=0.129150Jy sigma=0.000585 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129150Jy sigma=0.000585 ! Fit after self-cal, rms=0.129272Jy sigma=0.000584 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.085 mas, bmaj=76.7 mas, bpa=38.29 degrees ! Estimated noise=6570.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225305 Jy ! Component: 100 - total flux cleaned = 0.00421776 Jy ! Component: 150 - total flux cleaned = 0.00569246 Jy ! Component: 200 - total flux cleaned = 0.00707885 Jy ! Total flux subtracted in 200 components = 0.00707885 Jy ! Clean residual min=-0.002476 max=0.002482 Jy/beam ! Clean residual mean=0.000178 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.453393 Jy selfcal ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 222 components and 0.453393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128681Jy sigma=0.000582 ! Fit after self-cal, rms=0.128676Jy sigma=0.000582 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135032 Jy ! Component: 100 - total flux cleaned = 0.000139413 Jy ! Component: 150 - total flux cleaned = 0.000260913 Jy ! Component: 200 - total flux cleaned = 3.63916e-05 Jy ! Total flux subtracted in 200 components = 3.63916e-05 Jy ! Clean residual min=-0.001858 max=0.001853 Jy/beam ! Clean residual mean=0.000139 rms=0.000745 Jy/beam ! Combined flux in latest and established models = 0.45343 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 280 components and 0.45343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128383Jy sigma=0.000581 ! Fit after self-cal, rms=0.128398Jy sigma=0.000581 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128398Jy sigma=0.000581 ! Fit after self-cal, rms=0.128013Jy sigma=0.000581 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.093 mas, bmaj=76.66 mas, bpa=38.29 degrees ! Estimated noise=6549.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150412 Jy ! Component: 100 - total flux cleaned = 0.000583218 Jy ! Component: 150 - total flux cleaned = 0.000789763 Jy ! Component: 200 - total flux cleaned = 0.000987411 Jy ! Total flux subtracted in 200 components = 0.000987411 Jy ! Clean residual min=-0.001622 max=0.001624 Jy/beam ! Clean residual mean=0.000071 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.454417 Jy selfcal ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 334 components and 0.454417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127764Jy sigma=0.000580 ! Fit after self-cal, rms=0.127765Jy sigma=0.000580 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590085 Jy ! Component: 100 - total flux cleaned = 0.000766258 Jy ! Component: 150 - total flux cleaned = 0.000851381 Jy ! Component: 200 - total flux cleaned = 0.000850861 Jy ! Total flux subtracted in 200 components = 0.000850861 Jy ! Clean residual min=-0.001356 max=0.001355 Jy/beam ! Clean residual mean=0.000064 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.455268 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 385 components and 0.455268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127614Jy sigma=0.000580 ! Fit after self-cal, rms=0.127630Jy sigma=0.000580 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127630Jy sigma=0.000580 ! Fit after self-cal, rms=0.127223Jy sigma=0.000580 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.392 mas, bmaj=74.02 mas, bpa=37.89 degrees ! Estimated noise=6685.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164655 Jy ! Component: 100 - total flux cleaned = 8.91613e-05 Jy ! Component: 150 - total flux cleaned = 0.000168319 Jy ! Component: 200 - total flux cleaned = 0.000321387 Jy ! Total flux subtracted in 200 components = 0.000321387 Jy ! Clean residual min=-0.001258 max=0.001254 Jy/beam ! Clean residual mean=0.000032 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.455589 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 433 components and 0.455589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127081Jy sigma=0.000579 ! Fit after self-cal, rms=0.127079Jy sigma=0.000579 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801906 Jy ! Component: 100 - total flux cleaned = 0.00128414 Jy ! Component: 150 - total flux cleaned = 0.0014146 Jy ! Component: 200 - total flux cleaned = 0.00148044 Jy ! Total flux subtracted in 200 components = 0.00148044 Jy ! Clean residual min=-0.001070 max=0.001072 Jy/beam ! Clean residual mean=0.000025 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.45707 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 495 components and 0.45707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126998Jy sigma=0.000579 ! Fit after self-cal, rms=0.127007Jy sigma=0.000579 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.097 mas, bmaj=76.65 mas, bpa=38.28 degrees ! Estimated noise=6530.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.097 x 76.65 at 38.28 degrees (North through East) ! Clean map min=-0.011829 max=0.30516 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.064 mas, bmaj=76.29 mas, bpa=38.81 degrees ! Estimated noise=8188.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26555 Jy ! Component: 100 - total flux cleaned = 0.332952 Jy ! Component: 150 - total flux cleaned = 0.367067 Jy ! Component: 200 - total flux cleaned = 0.376732 Jy ! Total flux subtracted in 200 components = 0.376732 Jy ! Clean residual min=-0.013602 max=0.013656 Jy/beam ! Clean residual mean=0.000660 rms=0.005391 Jy/beam ! Combined flux in latest and established models = 0.376732 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 69 model components to the UV plane model. ! The established model now contains 69 components and 0.376732 Jy ! Inverting map and beam ! Estimated beam: bmin=8.097 mas, bmaj=76.65 mas, bpa=38.28 degrees ! Estimated noise=6530.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192122 Jy ! Component: 100 - total flux cleaned = 0.0310572 Jy ! Component: 150 - total flux cleaned = 0.0344478 Jy ! Component: 200 - total flux cleaned = 0.0340534 Jy ! Total flux subtracted in 200 components = 0.0340534 Jy ! Clean residual min=-0.006203 max=0.006246 Jy/beam ! Clean residual mean=0.000503 rms=0.002778 Jy/beam ! Combined flux in latest and established models = 0.410785 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 137 components and 0.410785 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.392 mas, bmaj=74.02 mas, bpa=37.89 degrees ! Estimated noise=6685.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00749127 Jy ! Component: 100 - total flux cleaned = 0.0122149 Jy ! Component: 150 - total flux cleaned = 0.0143634 Jy ! Component: 200 - total flux cleaned = 0.0153576 Jy ! Total flux subtracted in 200 components = 0.0153576 Jy ! Clean residual min=-0.003953 max=0.003950 Jy/beam ! Clean residual mean=0.000281 rms=0.001798 Jy/beam ! Combined flux in latest and established models = 0.426143 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222938 Jy ! Component: 100 - total flux cleaned = 0.000227885 Jy ! Component: 150 - total flux cleaned = 0.00131423 Jy ! Component: 200 - total flux cleaned = 0.00174136 Jy ! Total flux subtracted in 200 components = 0.00174136 Jy ! Clean residual min=-0.003453 max=0.003473 Jy/beam ! Clean residual mean=0.000087 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.427884 Jy ! Adding 123 model components to the UV plane model. ! The established model now contains 258 components and 0.427884 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.097 mas, bmaj=76.65 mas, bpa=38.28 degrees ! Estimated noise=6530.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185815 Jy ! Component: 100 - total flux cleaned = 0.00356016 Jy ! Component: 150 - total flux cleaned = 0.00455478 Jy ! Component: 200 - total flux cleaned = 0.00550145 Jy ! Total flux subtracted in 200 components = 0.00550145 Jy ! Clean residual min=-0.002189 max=0.002193 Jy/beam ! Clean residual mean=0.000035 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.433385 Jy selfcal ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 328 components and 0.433385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127592Jy sigma=0.000582 ! Fit after self-cal, rms=0.127525Jy sigma=0.000581 wmodel J1709-1728_S_2017_01_16_pus_map.mod ! Writing 328 model components to file: J1709-1728_S_2017_01_16_pus_map.mod wobs J1709-1728_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1709-1728_S_2017_01_16_pus_uvs.fits wwins J1709-1728_S_2017_01_16_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J1709-1728_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.097 x 76.65 at 38.28 degrees (North through East) ! Clean map min=-0.0062703 max=0.30536 Jy/beam ! Writing clean map to FITS file: J1709-1728_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.305357 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000886837 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.87128 0.87128 1.74256 3.48512 6.97024 13.9405 27.881 55.7619 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.305 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.097 x 76.65 at 38.28 degrees (North through East) ! Clean map min=-0.0062703 max=0.30536 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1709-1728_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:18:48 2019