! Started logfile: J1707+0148_S_2017_08_12_pus_uvs.log on Fri May 10 15:03:58 2019 obs J1707+0148_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J1707+0148_S_2017_08_12_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.551111 visibilities/baseline/integration-bin. ! Found source: J1707+0148 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1707+0148_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 79 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.291000Jy sigma=0.002128 ! Fit after self-cal, rms=0.249842Jy sigma=0.001815 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.222 mas, bmaj=8.207 mas, bpa=16.46 degrees ! Estimated noise=4267.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.609161 Jy ! Component: 100 - total flux cleaned = 0.741999 Jy ! Total flux subtracted in 100 components = 0.741999 Jy ! Clean residual min=-0.020921 max=0.037046 Jy/beam ! Clean residual mean=0.000070 rms=0.007589 Jy/beam ! Combined flux in latest and established models = 0.741999 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.741999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131705Jy sigma=0.000897 ! Fit after self-cal, rms=0.131705Jy sigma=0.000897 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.94 mas, bmaj=8.656 mas, bpa=20.09 degrees ! Estimated noise=3838.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0318893 Jy ! Component: 100 - total flux cleaned = 0.0379825 Jy ! Component: 150 - total flux cleaned = 0.0399256 Jy ! Component: 200 - total flux cleaned = 0.040177 Jy ! Total flux subtracted in 200 components = 0.040177 Jy ! Clean residual min=-0.019283 max=0.016588 Jy/beam ! Clean residual mean=0.000152 rms=0.004971 Jy/beam ! Combined flux in latest and established models = 0.782176 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.782176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123850Jy sigma=0.000843 ! Fit after self-cal, rms=0.123832Jy sigma=0.000843 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.99 KP 1.07 ! LA 0.99 MK 1.00* NL 0.87 OV 1.01 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.02 KP 1.01 ! LA 0.94 MK 1.00* NL 1.03 OV 1.07 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.02 KP 1.00* ! LA 0.95 MK 1.00* NL 0.97 OV 1.00* ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.123832Jy sigma=0.000843 ! Fit after self-cal, rms=0.114451Jy sigma=0.000764 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.955 mas, bmaj=8.794 mas, bpa=24.21 degrees ! Estimated noise=3911.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413481 Jy ! Component: 100 - total flux cleaned = 0.00470962 Jy ! Component: 150 - total flux cleaned = 0.00463965 Jy ! Component: 200 - total flux cleaned = 0.00450968 Jy ! Total flux subtracted in 200 components = 0.00450968 Jy ! Clean residual min=-0.008413 max=0.007745 Jy/beam ! Clean residual mean=0.000073 rms=0.002279 Jy/beam ! Combined flux in latest and established models = 0.786685 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.786685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114297Jy sigma=0.000763 ! Fit after self-cal, rms=0.114314Jy sigma=0.000763 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114314Jy sigma=0.000763 ! Fit after self-cal, rms=0.114454Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.954 mas, bmaj=8.782 mas, bpa=24.16 degrees ! Estimated noise=3909.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214288 Jy ! Component: 100 - total flux cleaned = 0.00227782 Jy ! Component: 150 - total flux cleaned = 0.00222768 Jy ! Component: 200 - total flux cleaned = 0.0021335 Jy ! Total flux subtracted in 200 components = 0.0021335 Jy ! Clean residual min=-0.008031 max=0.007722 Jy/beam ! Clean residual mean=0.000079 rms=0.002185 Jy/beam ! Combined flux in latest and established models = 0.788819 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.788819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114400Jy sigma=0.000762 ! Fit after self-cal, rms=0.114400Jy sigma=0.000762 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.39057e-05 Jy ! Component: 100 - total flux cleaned = -9.48518e-05 Jy ! Component: 150 - total flux cleaned = -0.000177088 Jy ! Component: 200 - total flux cleaned = -0.000215982 Jy ! Total flux subtracted in 200 components = -0.000215982 Jy ! Clean residual min=-0.007856 max=0.007702 Jy/beam ! Clean residual mean=0.000080 rms=0.002159 Jy/beam ! Combined flux in latest and established models = 0.788603 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 43 components and 0.788603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114377Jy sigma=0.000762 ! Fit after self-cal, rms=0.114375Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114375Jy sigma=0.000762 ! Fit after self-cal, rms=0.114433Jy sigma=0.000762 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.953 mas, bmaj=8.776 mas, bpa=24.14 degrees ! Estimated noise=3907.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879745 Jy ! Component: 100 - total flux cleaned = 0.00092729 Jy ! Component: 150 - total flux cleaned = 0.000888142 Jy ! Component: 200 - total flux cleaned = 0.000852532 Jy ! Total flux subtracted in 200 components = 0.000852532 Jy ! Clean residual min=-0.007660 max=0.007649 Jy/beam ! Clean residual mean=0.000082 rms=0.002122 Jy/beam ! Combined flux in latest and established models = 0.789456 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.789455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114410Jy sigma=0.000761 ! Fit after self-cal, rms=0.114408Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.99567e-06 Jy ! Component: 100 - total flux cleaned = -3.85343e-05 Jy ! Component: 150 - total flux cleaned = -0.000103612 Jy ! Component: 200 - total flux cleaned = -0.000135016 Jy ! Total flux subtracted in 200 components = -0.000135016 Jy ! Clean residual min=-0.007526 max=0.007617 Jy/beam ! Clean residual mean=0.000082 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 0.78932 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 49 components and 0.78932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114394Jy sigma=0.000761 ! Fit after self-cal, rms=0.114392Jy sigma=0.000761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114392Jy sigma=0.000761 ! Fit after self-cal, rms=0.114424Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.133 mas, bmaj=10.86 mas, bpa=4.976 degrees ! Estimated noise=4507.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201778 Jy ! Component: 100 - total flux cleaned = -0.000131274 Jy ! Component: 150 - total flux cleaned = -0.000130148 Jy ! Component: 200 - total flux cleaned = -0.000130158 Jy ! Total flux subtracted in 200 components = -0.000130158 Jy ! Clean residual min=-0.007192 max=0.009773 Jy/beam ! Clean residual mean=0.000138 rms=0.002550 Jy/beam ! Combined flux in latest and established models = 0.78919 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 56 components and 0.78919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114415Jy sigma=0.000761 ! Fit after self-cal, rms=0.114413Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.62145e-05 Jy ! Component: 100 - total flux cleaned = -6.73501e-05 Jy ! Component: 150 - total flux cleaned = -8.65067e-05 Jy ! Component: 200 - total flux cleaned = -0.000104646 Jy ! Total flux subtracted in 200 components = -0.000104646 Jy ! Clean residual min=-0.007146 max=0.009761 Jy/beam ! Clean residual mean=0.000138 rms=0.002548 Jy/beam ! Combined flux in latest and established models = 0.789086 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.789086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114406Jy sigma=0.000761 ! Fit after self-cal, rms=0.114403Jy sigma=0.000761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.953 mas, bmaj=8.773 mas, bpa=24.12 degrees ! Estimated noise=3905.94 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.953 x 8.773 at 24.12 degrees (North through East) ! Clean map min=-0.0071891 max=0.7838 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114403Jy sigma=0.000761 ! Fit after self-cal, rms=0.105767Jy sigma=0.000688 ! Inverting map and beam ! Estimated beam: bmin=5.953 mas, bmaj=8.777 mas, bpa=24.14 degrees ! Estimated noise=3905.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126587 Jy ! Component: 100 - total flux cleaned = -0.000191596 Jy ! Component: 150 - total flux cleaned = -0.000190575 Jy ! Component: 200 - total flux cleaned = -0.000189056 Jy ! Total flux subtracted in 200 components = -0.000189056 Jy ! Clean residual min=-0.006947 max=0.007010 Jy/beam ! Clean residual mean=0.000081 rms=0.002057 Jy/beam ! Combined flux in latest and established models = 0.788897 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 61 components and 0.788897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105756Jy sigma=0.000688 ! Fit after self-cal, rms=0.105755Jy sigma=0.000688 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.99661e-05 Jy ! Component: 100 - total flux cleaned = -2.97184e-05 Jy ! Component: 150 - total flux cleaned = -5.49947e-05 Jy ! Component: 200 - total flux cleaned = -0.000103211 Jy ! Total flux subtracted in 200 components = -0.000103211 Jy ! Clean residual min=-0.006832 max=0.007009 Jy/beam ! Clean residual mean=0.000082 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 0.788793 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.788793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105748Jy sigma=0.000688 ! Fit after self-cal, rms=0.105747Jy sigma=0.000688 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105747Jy sigma=0.000688 ! Fit after self-cal, rms=0.105711Jy sigma=0.000688 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.279 mas, bmaj=8.488 mas, bpa=22.59 degrees ! Estimated noise=4309.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.608256 Jy ! Component: 100 - total flux cleaned = 0.740896 Jy ! Component: 150 - total flux cleaned = 0.769929 Jy ! Component: 200 - total flux cleaned = 0.779413 Jy ! Total flux subtracted in 200 components = 0.779413 Jy ! Clean residual min=-0.010007 max=0.007541 Jy/beam ! Clean residual mean=0.000065 rms=0.002624 Jy/beam ! Combined flux in latest and established models = 0.779413 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.779413 Jy ! Inverting map and beam ! Estimated beam: bmin=5.953 mas, bmaj=8.777 mas, bpa=24.13 degrees ! Estimated noise=3904.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00671964 Jy ! Component: 100 - total flux cleaned = 0.0102774 Jy ! Component: 150 - total flux cleaned = 0.010937 Jy ! Component: 200 - total flux cleaned = 0.011081 Jy ! Total flux subtracted in 200 components = 0.011081 Jy ! Clean residual min=-0.008257 max=0.007382 Jy/beam ! Clean residual mean=0.000073 rms=0.002195 Jy/beam ! Combined flux in latest and established models = 0.790493 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.790493 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.133 mas, bmaj=10.87 mas, bpa=5.002 degrees ! Estimated noise=4504.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000999973 Jy ! Component: 100 - total flux cleaned = -0.000955455 Jy ! Component: 150 - total flux cleaned = -0.000883724 Jy ! Component: 200 - total flux cleaned = -0.000916392 Jy ! Total flux subtracted in 200 components = -0.000916392 Jy ! Clean residual min=-0.008303 max=0.009406 Jy/beam ! Clean residual mean=0.000126 rms=0.002564 Jy/beam ! Combined flux in latest and established models = 0.789577 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.06526e-05 Jy ! Component: 100 - total flux cleaned = -6.04356e-05 Jy ! Component: 150 - total flux cleaned = -8.88172e-05 Jy ! Component: 200 - total flux cleaned = -0.000117682 Jy ! Total flux subtracted in 200 components = -0.000117682 Jy ! Clean residual min=-0.008193 max=0.009378 Jy/beam ! Clean residual mean=0.000127 rms=0.002560 Jy/beam ! Combined flux in latest and established models = 0.789459 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 0.789459 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.953 mas, bmaj=8.777 mas, bpa=24.13 degrees ! Estimated noise=3904.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311377 Jy ! Component: 100 - total flux cleaned = 0.00047461 Jy ! Component: 150 - total flux cleaned = 0.000619255 Jy ! Component: 200 - total flux cleaned = 0.000792172 Jy ! Total flux subtracted in 200 components = 0.000792172 Jy ! Clean residual min=-0.007602 max=0.007219 Jy/beam ! Clean residual mean=0.000075 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 0.790251 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.790251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105813Jy sigma=0.000689 ! Fit after self-cal, rms=0.105810Jy sigma=0.000689 wmodel J1707+0148_S_2017_08_12_pus_map.mod ! Writing 60 model components to file: J1707+0148_S_2017_08_12_pus_map.mod wobs J1707+0148_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J1707+0148_S_2017_08_12_pus_uvs.fits wwins J1707+0148_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J1707+0148_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193675 Jy ! Component: 100 - total flux cleaned = 0.000763662 Jy ! Component: 150 - total flux cleaned = 0.000439136 Jy ! Component: 200 - total flux cleaned = 0.000238819 Jy ! Component: 250 - total flux cleaned = 4.8778e-05 Jy ! Component: 300 - total flux cleaned = 5.15584e-05 Jy ! Component: 350 - total flux cleaned = 4.99613e-05 Jy ! Component: 400 - total flux cleaned = 5.094e-05 Jy ! Component: 450 - total flux cleaned = 5.22013e-05 Jy ! Component: 500 - total flux cleaned = -9.88638e-05 Jy ! Component: 550 - total flux cleaned = -0.000318639 Jy ! Component: 600 - total flux cleaned = -0.000390335 Jy ! Component: 650 - total flux cleaned = -0.000794795 Jy ! Component: 700 - total flux cleaned = -0.0009254 Jy ! Component: 750 - total flux cleaned = -0.00136901 Jy ! Component: 800 - total flux cleaned = -0.0016156 Jy ! Component: 850 - total flux cleaned = -0.00191464 Jy ! Component: 900 - total flux cleaned = -0.00208954 Jy ! Component: 950 - total flux cleaned = -0.00226045 Jy ! Component: 1000 - total flux cleaned = -0.00242667 Jy ! Component: 1050 - total flux cleaned = -0.00275242 Jy ! Component: 1100 - total flux cleaned = -0.0029645 Jy ! Component: 1150 - total flux cleaned = -0.0032773 Jy ! Component: 1200 - total flux cleaned = -0.0034304 Jy ! Component: 1250 - total flux cleaned = -0.00358127 Jy ! Component: 1300 - total flux cleaned = -0.00373024 Jy ! Component: 1350 - total flux cleaned = -0.003877 Jy ! Component: 1400 - total flux cleaned = -0.00406902 Jy ! Component: 1450 - total flux cleaned = -0.00425764 Jy ! Component: 1500 - total flux cleaned = -0.0043969 Jy ! Component: 1550 - total flux cleaned = -0.00448836 Jy ! Component: 1600 - total flux cleaned = -0.00453351 Jy ! Component: 1650 - total flux cleaned = -0.00457779 Jy ! Component: 1700 - total flux cleaned = -0.00457771 Jy ! Component: 1750 - total flux cleaned = -0.00462169 Jy ! Component: 1800 - total flux cleaned = -0.00457748 Jy ! Component: 1850 - total flux cleaned = -0.00449038 Jy ! Component: 1900 - total flux cleaned = -0.0044471 Jy ! Component: 1950 - total flux cleaned = -0.00444695 Jy ! Component: 2000 - total flux cleaned = -0.00440407 Jy ! Component: 2050 - total flux cleaned = -0.004404 Jy ! Component: 2100 - total flux cleaned = -0.0044041 Jy ! Component: 2150 - total flux cleaned = -0.00444664 Jy ! Component: 2200 - total flux cleaned = -0.00448934 Jy ! Component: 2250 - total flux cleaned = -0.0044893 Jy ! Component: 2300 - total flux cleaned = -0.00448946 Jy ! Component: 2350 - total flux cleaned = -0.00453235 Jy ! Component: 2400 - total flux cleaned = -0.00457509 Jy ! Component: 2450 - total flux cleaned = -0.0046185 Jy ! Component: 2500 - total flux cleaned = -0.00470534 Jy ! Component: 2550 - total flux cleaned = -0.00492407 Jy ! Component: 2600 - total flux cleaned = -0.00501218 Jy ! Component: 2650 - total flux cleaned = -0.005233 Jy ! Component: 2700 - total flux cleaned = -0.00541126 Jy ! Component: 2750 - total flux cleaned = -0.00541134 Jy ! Component: 2800 - total flux cleaned = -0.00554696 Jy ! Component: 2850 - total flux cleaned = -0.00545564 Jy ! Component: 2900 - total flux cleaned = -0.00550154 Jy ! Component: 2950 - total flux cleaned = -0.00554769 Jy ! Component: 3000 - total flux cleaned = -0.0056408 Jy ! Component: 3050 - total flux cleaned = -0.00559415 Jy ! Component: 3100 - total flux cleaned = -0.00549872 Jy ! Component: 3150 - total flux cleaned = -0.00554676 Jy ! Component: 3200 - total flux cleaned = -0.00559559 Jy ! Component: 3250 - total flux cleaned = -0.00574396 Jy ! Component: 3300 - total flux cleaned = -0.00564451 Jy ! Component: 3350 - total flux cleaned = -0.00574564 Jy ! Component: 3400 - total flux cleaned = -0.00564314 Jy ! Component: 3450 - total flux cleaned = -0.00564257 Jy ! Component: 3500 - total flux cleaned = -0.00564256 Jy ! Component: 3550 - total flux cleaned = -0.00569651 Jy ! Component: 3600 - total flux cleaned = -0.0056964 Jy ! Component: 3650 - total flux cleaned = -0.00569561 Jy ! Component: 3700 - total flux cleaned = -0.00569538 Jy ! Component: 3750 - total flux cleaned = -0.00569472 Jy ! Component: 3800 - total flux cleaned = -0.00569491 Jy ! Component: 3850 - total flux cleaned = -0.00581309 Jy ! Component: 3900 - total flux cleaned = -0.00575321 Jy ! Component: 3950 - total flux cleaned = -0.00575219 Jy ! Component: 4000 - total flux cleaned = -0.00581384 Jy ! Component: 4050 - total flux cleaned = -0.00594047 Jy ! Total flux subtracted in 4096 components = -0.00587619 Jy ! Clean residual min=-0.003685 max=0.003510 Jy/beam ! Clean residual mean=-0.000008 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.784375 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 322 components and 0.784375 Jy ![Exited script file: muppet] wmap "J1707+0148_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.953 x 8.777 at 24.13 degrees (North through East) ! Clean map min=-0.010242 max=0.78245 Jy/beam ! Writing clean map to FITS file: J1707+0148_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.782449 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000979933 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.375718 0.375718 0.751435 1.50287 3.00574 6.01148 12.023 24.0459 48.0919 96.1837 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.782 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.953 x 8.777 at 24.13 degrees (North through East) ! Clean map min=-0.010242 max=0.78245 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1707+0148_S_2017_08_12_pus_uvs.log closed on Fri May 10 15:04:03 2019