! Started logfile: J1705-2445_S_2017_10_21_pus_uvs.log on Sat May 11 21:02:43 2019 obs J1705-2445_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1705-2445_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.74387 visibilities/baseline/integration-bin. ! Found source: J1705-2445 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1705-2445_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 203 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 393 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1029 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002385Jy sigma=0.007804 ! Fit after self-cal, rms=0.947643Jy sigma=0.007395 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.923 mas, bmaj=12.86 mas, bpa=-17.79 degrees ! Estimated noise=1326.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422885 Jy ! Component: 100 - total flux cleaned = 0.0516948 Jy ! Total flux subtracted in 100 components = 0.0516948 Jy ! Clean residual min=-0.006011 max=0.005264 Jy/beam ! Clean residual mean=-0.000020 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 0.0516948 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0516948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095303Jy sigma=0.000691 ! Fit after self-cal, rms=0.093598Jy sigma=0.000678 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=15.85 mas, bpa=-16.55 degrees ! Estimated noise=944.768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0074502 Jy ! Component: 100 - total flux cleaned = 0.0106409 Jy ! Component: 150 - total flux cleaned = 0.012423 Jy ! Component: 200 - total flux cleaned = 0.013468 Jy ! Total flux subtracted in 200 components = 0.013468 Jy ! Clean residual min=-0.004169 max=0.003448 Jy/beam ! Clean residual mean=-0.000009 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.0651628 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 59 components and 0.0651628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092992Jy sigma=0.000674 ! Fit after self-cal, rms=0.093005Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 0.93 KP 1.28 ! LA 1.14 MK 1.11 NL 1.00 OV 1.07 ! PT 0.79 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.16 KP 1.11 ! LA 1.06 MK 1.13 NL 1.04 OV 1.05 ! PT 0.76 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.02 KP 1.13 ! LA 0.75 MK 1.05 NL 1.17 OV 1.01 ! PT 0.78 ! ! ! Correcting IF 4. ! A total of 156 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.78 KP 1.00* ! LA 0.57 MK 1.00* NL 1.00* OV 1.00* ! PT 0.69 ! ! ! Fit before self-cal, rms=0.093005Jy sigma=0.000673 ! Fit after self-cal, rms=0.093188Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=16.23 mas, bpa=-16.61 degrees ! Estimated noise=966.994 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.1271e-05 Jy ! Component: 100 - total flux cleaned = -6.36619e-05 Jy ! Component: 150 - total flux cleaned = -6.47129e-05 Jy ! Component: 200 - total flux cleaned = -6.49156e-05 Jy ! Total flux subtracted in 200 components = -6.49156e-05 Jy ! Clean residual min=-0.002034 max=0.002371 Jy/beam ! Clean residual mean=0.000002 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0650979 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 74 components and 0.0650979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093172Jy sigma=0.000667 ! Fit after self-cal, rms=0.093751Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093751Jy sigma=0.000664 ! Fit after self-cal, rms=0.096425Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.993 mas, bmaj=16.18 mas, bpa=-17.01 degrees ! Estimated noise=969.469 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.19878e-05 Jy ! Component: 100 - total flux cleaned = 8.67464e-05 Jy ! Component: 150 - total flux cleaned = 0.000148157 Jy ! Component: 200 - total flux cleaned = 0.000147615 Jy ! Total flux subtracted in 200 components = 0.000147615 Jy ! Clean residual min=-0.002325 max=0.002560 Jy/beam ! Clean residual mean=-0.000004 rms=0.000591 Jy/beam ! Combined flux in latest and established models = 0.0652455 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 80 components and 0.0652455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096409Jy sigma=0.000663 ! Fit after self-cal, rms=0.096957Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.54999e-05 Jy ! Component: 100 - total flux cleaned = 5.87289e-06 Jy ! Component: 150 - total flux cleaned = 2.58578e-05 Jy ! Component: 200 - total flux cleaned = 2.57075e-05 Jy ! Total flux subtracted in 200 components = 2.57075e-05 Jy ! Clean residual min=-0.002391 max=0.002478 Jy/beam ! Clean residual mean=-0.000007 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0652712 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 84 components and 0.0652712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096943Jy sigma=0.000662 ! Fit after self-cal, rms=0.096956Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096956Jy sigma=0.000662 ! Fit after self-cal, rms=0.098690Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.976 mas, bmaj=16.14 mas, bpa=-17.14 degrees ! Estimated noise=970.604 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.48069e-05 Jy ! Component: 100 - total flux cleaned = 0.000108318 Jy ! Component: 150 - total flux cleaned = 0.000167593 Jy ! Component: 200 - total flux cleaned = 0.000167374 Jy ! Total flux subtracted in 200 components = 0.000167374 Jy ! Clean residual min=-0.002289 max=0.002799 Jy/beam ! Clean residual mean=-0.000005 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0654386 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 86 components and 0.0654386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098673Jy sigma=0.000661 ! Fit after self-cal, rms=0.098985Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (109.5, -78.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000879435 Jy ! Component: 100 - total flux cleaned = 0.000577074 Jy ! Component: 150 - total flux cleaned = 0.000327276 Jy ! Component: 200 - total flux cleaned = 0.000152316 Jy ! Total flux subtracted in 200 components = 0.000152316 Jy ! Clean residual min=-0.002052 max=0.002027 Jy/beam ! Clean residual mean=-0.000009 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0655909 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 110 components and 0.0655909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098892Jy sigma=0.000661 ! Fit after self-cal, rms=0.098946Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098946Jy sigma=0.000661 ! Fit after self-cal, rms=0.099707Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.949 mas, bmaj=27 mas, bpa=-7.623 degrees ! Estimated noise=1084.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000587621 Jy ! Component: 100 - total flux cleaned = 0.000579816 Jy ! Component: 150 - total flux cleaned = 0.000511834 Jy ! Component: 200 - total flux cleaned = 0.000368968 Jy ! Total flux subtracted in 200 components = 0.000368968 Jy ! Clean residual min=-0.001715 max=0.002067 Jy/beam ! Clean residual mean=-0.000009 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.0659598 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.0659598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099673Jy sigma=0.000660 ! Fit after self-cal, rms=0.099799Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.93309e-05 Jy ! Component: 100 - total flux cleaned = 1.55813e-05 Jy ! Component: 150 - total flux cleaned = -4.53665e-05 Jy ! Component: 200 - total flux cleaned = -0.000128155 Jy ! Total flux subtracted in 200 components = -0.000128155 Jy ! Clean residual min=-0.001763 max=0.002120 Jy/beam ! Clean residual mean=-0.000012 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.0658317 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 129 components and 0.0658317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099775Jy sigma=0.000660 ! Fit after self-cal, rms=0.099764Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=16.09 mas, bpa=-17.28 degrees ! Estimated noise=967.62 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.963 x 16.09 at -17.28 degrees (North through East) ! Clean map min=-0.0025812 max=0.056573 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=12.95 mas, bpa=-18.75 degrees ! Estimated noise=1369.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427532 Jy ! Component: 100 - total flux cleaned = 0.0531476 Jy ! Component: 150 - total flux cleaned = 0.0574431 Jy ! Component: 200 - total flux cleaned = 0.0592078 Jy ! Total flux subtracted in 200 components = 0.0592078 Jy ! Clean residual min=-0.004029 max=0.003521 Jy/beam ! Clean residual mean=-0.000011 rms=0.000944 Jy/beam ! Combined flux in latest and established models = 0.0592078 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.0592078 Jy ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=16.09 mas, bpa=-17.28 degrees ! Estimated noise=967.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364747 Jy ! Component: 100 - total flux cleaned = 0.0047767 Jy ! Component: 150 - total flux cleaned = 0.0053994 Jy ! Component: 200 - total flux cleaned = 0.00576328 Jy ! Total flux subtracted in 200 components = 0.00576328 Jy ! Clean residual min=-0.002477 max=0.002002 Jy/beam ! Clean residual mean=-0.000009 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0649711 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 75 components and 0.0649711 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.949 mas, bmaj=27 mas, bpa=-7.623 degrees ! Estimated noise=1084.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621048 Jy ! Component: 100 - total flux cleaned = 0.000729159 Jy ! Component: 150 - total flux cleaned = 0.000774429 Jy ! Component: 200 - total flux cleaned = 0.000810925 Jy ! Total flux subtracted in 200 components = 0.000810925 Jy ! Clean residual min=-0.001806 max=0.001986 Jy/beam ! Clean residual mean=-0.000012 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.065782 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.16962e-05 Jy ! Component: 100 - total flux cleaned = 3.17845e-05 Jy ! Component: 150 - total flux cleaned = -4.25491e-05 Jy ! Component: 200 - total flux cleaned = -8.82275e-05 Jy ! Total flux subtracted in 200 components = -8.82275e-05 Jy ! Clean residual min=-0.001808 max=0.002006 Jy/beam ! Clean residual mean=-0.000012 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.0656938 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 117 components and 0.0656938 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=16.09 mas, bpa=-17.28 degrees ! Estimated noise=967.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000129973 Jy ! Component: 100 - total flux cleaned = -0.000239669 Jy ! Component: 150 - total flux cleaned = -0.000273861 Jy ! Component: 200 - total flux cleaned = -0.000305988 Jy ! Total flux subtracted in 200 components = -0.000305988 Jy ! Clean residual min=-0.002101 max=0.002134 Jy/beam ! Clean residual mean=-0.000008 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0653878 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.0653878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099736Jy sigma=0.000660 ! Fit after self-cal, rms=0.099774Jy sigma=0.000660 wmodel J1705-2445_S_2017_10_21_pus_map.mod ! Writing 139 model components to file: J1705-2445_S_2017_10_21_pus_map.mod wobs J1705-2445_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1705-2445_S_2017_10_21_pus_uvs.fits wwins J1705-2445_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1705-2445_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145996 Jy ! Component: 100 - total flux cleaned = -0.000220306 Jy ! Component: 150 - total flux cleaned = -0.00035953 Jy ! Component: 200 - total flux cleaned = -0.00052544 Jy ! Component: 250 - total flux cleaned = -0.00074794 Jy ! Component: 300 - total flux cleaned = -0.000930573 Jy ! Component: 350 - total flux cleaned = -0.00110596 Jy ! Component: 400 - total flux cleaned = -0.00121807 Jy ! Component: 450 - total flux cleaned = -0.00124479 Jy ! Component: 500 - total flux cleaned = -0.00129696 Jy ! Component: 550 - total flux cleaned = -0.00139913 Jy ! Component: 600 - total flux cleaned = -0.00142347 Jy ! Component: 650 - total flux cleaned = -0.00149539 Jy ! Component: 700 - total flux cleaned = -0.00154241 Jy ! Component: 750 - total flux cleaned = -0.00161111 Jy ! Component: 800 - total flux cleaned = -0.00172241 Jy ! Component: 850 - total flux cleaned = -0.00178771 Jy ! Component: 900 - total flux cleaned = -0.00185096 Jy ! Component: 950 - total flux cleaned = -0.00187144 Jy ! Component: 1000 - total flux cleaned = -0.00195287 Jy ! Component: 1050 - total flux cleaned = -0.00195224 Jy ! Component: 1100 - total flux cleaned = -0.00195229 Jy ! Component: 1150 - total flux cleaned = -0.00193333 Jy ! Component: 1200 - total flux cleaned = -0.00202865 Jy ! Component: 1250 - total flux cleaned = -0.00201005 Jy ! Component: 1300 - total flux cleaned = -0.00202865 Jy ! Component: 1350 - total flux cleaned = -0.00204683 Jy ! Component: 1400 - total flux cleaned = -0.00206505 Jy ! Component: 1450 - total flux cleaned = -0.00210033 Jy ! Component: 1500 - total flux cleaned = -0.00211776 Jy ! Component: 1550 - total flux cleaned = -0.00213492 Jy ! Component: 1600 - total flux cleaned = -0.00215169 Jy ! Component: 1650 - total flux cleaned = -0.00215172 Jy ! Component: 1700 - total flux cleaned = -0.00216804 Jy ! Component: 1750 - total flux cleaned = -0.00215198 Jy ! Component: 1800 - total flux cleaned = -0.00216807 Jy ! Component: 1850 - total flux cleaned = -0.00215205 Jy ! Component: 1900 - total flux cleaned = -0.00215198 Jy ! Component: 1950 - total flux cleaned = -0.00212117 Jy ! Component: 2000 - total flux cleaned = -0.00209112 Jy ! Component: 2050 - total flux cleaned = -0.00207626 Jy ! Component: 2100 - total flux cleaned = -0.00204667 Jy ! Component: 2150 - total flux cleaned = -0.00204668 Jy ! Component: 2200 - total flux cleaned = -0.00201796 Jy ! Component: 2250 - total flux cleaned = -0.00201794 Jy ! Component: 2300 - total flux cleaned = -0.0020177 Jy ! Component: 2350 - total flux cleaned = -0.00200355 Jy ! Component: 2400 - total flux cleaned = -0.00196225 Jy ! Component: 2450 - total flux cleaned = -0.00190774 Jy ! Component: 2500 - total flux cleaned = -0.00190775 Jy ! Component: 2550 - total flux cleaned = -0.00188072 Jy ! Component: 2600 - total flux cleaned = -0.0018142 Jy ! Component: 2650 - total flux cleaned = -0.00181434 Jy ! Component: 2700 - total flux cleaned = -0.00178832 Jy ! Component: 2750 - total flux cleaned = -0.00173657 Jy ! Component: 2800 - total flux cleaned = -0.00168533 Jy ! Component: 2850 - total flux cleaned = -0.00165994 Jy ! Component: 2900 - total flux cleaned = -0.00164741 Jy ! Component: 2950 - total flux cleaned = -0.00162232 Jy ! Component: 3000 - total flux cleaned = -0.00156023 Jy ! Component: 3050 - total flux cleaned = -0.00152322 Jy ! Component: 3100 - total flux cleaned = -0.0014865 Jy ! Component: 3150 - total flux cleaned = -0.00147433 Jy ! Component: 3200 - total flux cleaned = -0.00143823 Jy ! Component: 3250 - total flux cleaned = -0.0014142 Jy ! Component: 3300 - total flux cleaned = -0.00141419 Jy ! Component: 3350 - total flux cleaned = -0.0013787 Jy ! Component: 3400 - total flux cleaned = -0.00137861 Jy ! Component: 3450 - total flux cleaned = -0.0013436 Jy ! Component: 3500 - total flux cleaned = -0.00132047 Jy ! Component: 3550 - total flux cleaned = -0.00129751 Jy ! Component: 3600 - total flux cleaned = -0.00126335 Jy ! Component: 3650 - total flux cleaned = -0.00121798 Jy ! Component: 3700 - total flux cleaned = -0.00119561 Jy ! Component: 3750 - total flux cleaned = -0.00117322 Jy ! Component: 3800 - total flux cleaned = -0.00116207 Jy ! Component: 3850 - total flux cleaned = -0.001151 Jy ! Component: 3900 - total flux cleaned = -0.00116189 Jy ! Component: 3950 - total flux cleaned = -0.00110728 Jy ! Component: 4000 - total flux cleaned = -0.00109647 Jy ! Component: 4050 - total flux cleaned = -0.00108568 Jy ! Total flux subtracted in 4096 components = -0.00111791 Jy ! Clean residual min=-0.000586 max=0.000646 Jy/beam ! Clean residual mean=0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.0642699 Jy keep ! Adding 237 model components to the UV plane model. ! The established model now contains 376 components and 0.0642699 Jy ![Exited script file: muppet] wmap "J1705-2445_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.963 x 16.09 at -17.28 degrees (North through East) ! Clean map min=-0.0029982 max=0.055148 Jy/beam ! Writing clean map to FITS file: J1705-2445_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0551482 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192178 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04542 1.04542 2.09085 4.1817 8.3634 16.7268 33.4536 66.9072 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.055 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.963 x 16.09 at -17.28 degrees (North through East) ! Clean map min=-0.0029982 max=0.055148 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1705-2445_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:02:48 2019