! Started logfile: J1705+5109_X_2017_06_10_pus_uvs.log on Mon May 6 12:50:13 2019 obs J1705+5109_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1705+5109_X_2017_06_10_pus_uva.fits ! AN table 1: 231 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977778 visibilities/baseline/integration-bin. ! Found source: J1705+5109 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 121968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1705+5109_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.932305Jy sigma=0.008751 ! Fit after self-cal, rms=0.917773Jy sigma=0.008624 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7789 mas, bmaj=1.055 mas, bpa=-4.59 degrees ! Estimated noise=575.571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637345 Jy ! Component: 100 - total flux cleaned = 0.0792331 Jy ! Total flux subtracted in 100 components = 0.0792331 Jy ! Clean residual min=-0.002423 max=0.007443 Jy/beam ! Clean residual mean=-0.000030 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.079233 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.079233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075657Jy sigma=0.000678 ! Fit after self-cal, rms=0.075642Jy sigma=0.000678 ! Inverting map ! Added new window around map position (0.2, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00782703 Jy ! Component: 100 - total flux cleaned = 0.0125958 Jy ! Total flux subtracted in 100 components = 0.0125958 Jy ! Clean residual min=-0.001983 max=0.004376 Jy/beam ! Clean residual mean=-0.000017 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0918289 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.0918289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074606Jy sigma=0.000667 ! Fit after self-cal, rms=0.074565Jy sigma=0.000667 ! Inverting map ! Added new window around map position (0, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00456428 Jy ! Component: 100 - total flux cleaned = 0.00747141 Jy ! Total flux subtracted in 100 components = 0.00747141 Jy ! Clean residual min=-0.001744 max=0.002184 Jy/beam ! Clean residual mean=-0.000010 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0993003 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 15 components and 0.0993003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074243Jy sigma=0.000663 ! Fit after self-cal, rms=0.074230Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9953 mas, bmaj=1.344 mas, bpa=-3.723 degrees ! Estimated noise=217.237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027633 Jy ! Component: 100 - total flux cleaned = 0.00438804 Jy ! Component: 150 - total flux cleaned = 0.00541599 Jy ! Component: 200 - total flux cleaned = 0.00611197 Jy ! Total flux subtracted in 200 components = 0.00611197 Jy ! Clean residual min=-0.000682 max=0.001104 Jy/beam ! Clean residual mean=-0.000008 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.105412 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.105412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074126Jy sigma=0.000662 ! Fit after self-cal, rms=0.074124Jy sigma=0.000662 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.01 KP 1.02 ! LA 0.97 MK 1.00 NL 0.97 OV 1.00 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.98 KP 0.98 ! LA 0.99 MK 0.99 NL 0.98 OV 0.99 ! PT 1.05 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.99 KP 1.00 ! LA 0.99 MK 1.01 NL 0.98 OV 0.99 ! PT 1.00 SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.02 KP 1.02 ! LA 1.00 MK 1.00 NL 0.98 OV 0.99 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 0.98 KP 0.98 ! LA 0.98 MK 1.06 NL 0.97 OV 0.98 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 1.01 KP 1.02 ! LA 0.98 MK 0.97 NL 0.98 OV 0.98 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.97 KP 1.01 ! LA 0.99 MK 1.02 NL 0.96 OV 1.03 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 0.96 KP 0.99 ! LA 0.98 MK 0.99 NL 0.96 OV 1.01 ! PT 1.02 SC 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.00 KP 1.02 ! LA 1.00 MK 0.98 NL 0.98 OV 1.00 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 0.96 KP 0.98 ! LA 1.03 MK 1.11 NL 0.97 OV 0.98 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00 KP 1.02 ! LA 0.98 MK 1.00 NL 0.97 OV 0.96 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.96 KP 0.97 ! LA 0.99 MK 1.01 NL 0.96 OV 0.99 ! PT 1.00 SC 1.02 ! ! ! Fit before self-cal, rms=0.074124Jy sigma=0.000662 ! Fit after self-cal, rms=0.074099Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.003 mas, bmaj=1.354 mas, bpa=-4.354 degrees ! Estimated noise=216.958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00097999 Jy ! Component: 100 - total flux cleaned = 0.00146184 Jy ! Component: 150 - total flux cleaned = 0.00165208 Jy ! Component: 200 - total flux cleaned = 0.00181877 Jy ! Total flux subtracted in 200 components = 0.00181877 Jy ! Clean residual min=-0.000625 max=0.000824 Jy/beam ! Clean residual mean=-0.000005 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.107231 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 0.107231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074082Jy sigma=0.000661 ! Fit after self-cal, rms=0.074096Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.074096Jy sigma=0.000661 ! Fit after self-cal, rms=0.075878Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=1.355 mas, bpa=-4.145 degrees ! Estimated noise=216.976 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306754 Jy ! Component: 100 - total flux cleaned = 0.000484317 Jy ! Component: 150 - total flux cleaned = 0.000576222 Jy ! Component: 200 - total flux cleaned = 0.000615721 Jy ! Total flux subtracted in 200 components = 0.000615721 Jy ! Clean residual min=-0.000569 max=0.000571 Jy/beam ! Clean residual mean=-0.000002 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.107847 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.107847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075874Jy sigma=0.000660 ! Fit after self-cal, rms=0.075905Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.30257e-05 Jy ! Component: 100 - total flux cleaned = 0.00019575 Jy ! Component: 150 - total flux cleaned = 0.000216622 Jy ! Component: 200 - total flux cleaned = 0.000230365 Jy ! Total flux subtracted in 200 components = 0.000230365 Jy ! Clean residual min=-0.000569 max=0.000566 Jy/beam ! Clean residual mean=-0.000001 rms=0.000143 Jy/beam ! Combined flux in latest and established models = 0.108077 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 0.108077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075904Jy sigma=0.000660 ! Fit after self-cal, rms=0.075904Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075904Jy sigma=0.000660 ! Fit after self-cal, rms=0.076234Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=1.356 mas, bpa=-4.089 degrees ! Estimated noise=217.082 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.05972e-05 Jy ! Component: 100 - total flux cleaned = 0.000180605 Jy ! Component: 150 - total flux cleaned = 0.000200354 Jy ! Component: 200 - total flux cleaned = 0.000219094 Jy ! Total flux subtracted in 200 components = 0.000219094 Jy ! Clean residual min=-0.000557 max=0.000582 Jy/beam ! Clean residual mean=-0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.108296 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.108296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076233Jy sigma=0.000660 ! Fit after self-cal, rms=0.076235Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.7919e-05 Jy ! Component: 100 - total flux cleaned = 7.51658e-05 Jy ! Component: 150 - total flux cleaned = 9.24556e-05 Jy ! Component: 200 - total flux cleaned = 9.80593e-05 Jy ! Total flux subtracted in 200 components = 9.80593e-05 Jy ! Clean residual min=-0.000555 max=0.000581 Jy/beam ! Clean residual mean=-0.000001 rms=0.000142 Jy/beam ! Combined flux in latest and established models = 0.108394 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.108394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076234Jy sigma=0.000660 ! Fit after self-cal, rms=0.076234Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076234Jy sigma=0.000660 ! Fit after self-cal, rms=0.076318Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.29 mas, bmaj=2.405 mas, bpa=1.566 degrees ! Estimated noise=275.272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245891 Jy ! Component: 100 - total flux cleaned = 0.000384129 Jy ! Component: 150 - total flux cleaned = 0.000475362 Jy ! Component: 200 - total flux cleaned = 0.000496685 Jy ! Total flux subtracted in 200 components = 0.000496685 Jy ! Clean residual min=-0.000567 max=0.000663 Jy/beam ! Clean residual mean=-0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.108891 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 0.108891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076318Jy sigma=0.000660 ! Fit after self-cal, rms=0.076318Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101612 Jy ! Component: 100 - total flux cleaned = 0.000125173 Jy ! Component: 150 - total flux cleaned = 0.000135653 Jy ! Component: 200 - total flux cleaned = 0.000142979 Jy ! Total flux subtracted in 200 components = 0.000142979 Jy ! Clean residual min=-0.000569 max=0.000665 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.109034 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.109034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076319Jy sigma=0.000660 ! Fit after self-cal, rms=0.076319Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=1.356 mas, bpa=-4.086 degrees ! Estimated noise=217.194 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1 x 1.356 at -4.086 degrees (North through East) ! Clean map min=-0.00049582 max=0.084103 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7814 mas, bmaj=1.068 mas, bpa=-5.478 degrees ! Estimated noise=578.798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637116 Jy ! Component: 100 - total flux cleaned = 0.0798012 Jy ! Component: 150 - total flux cleaned = 0.0882942 Jy ! Component: 200 - total flux cleaned = 0.0939324 Jy ! Total flux subtracted in 200 components = 0.0939324 Jy ! Clean residual min=-0.001921 max=0.003061 Jy/beam ! Clean residual mean=-0.000015 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.0939324 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0939324 Jy ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=1.356 mas, bpa=-4.086 degrees ! Estimated noise=217.194 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00489061 Jy ! Component: 100 - total flux cleaned = 0.00772166 Jy ! Component: 150 - total flux cleaned = 0.00950872 Jy ! Component: 200 - total flux cleaned = 0.0107571 Jy ! Total flux subtracted in 200 components = 0.0107571 Jy ! Clean residual min=-0.000640 max=0.000699 Jy/beam ! Clean residual mean=-0.000009 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.10469 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.10469 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.29 mas, bmaj=2.405 mas, bpa=1.566 degrees ! Estimated noise=275.272 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146437 Jy ! Component: 100 - total flux cleaned = 0.00233012 Jy ! Component: 150 - total flux cleaned = 0.00292177 Jy ! Component: 200 - total flux cleaned = 0.00334574 Jy ! Total flux subtracted in 200 components = 0.00334574 Jy ! Clean residual min=-0.000602 max=0.000633 Jy/beam ! Clean residual mean=-0.000004 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.108035 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030785 Jy ! Component: 100 - total flux cleaned = 0.000533894 Jy ! Component: 150 - total flux cleaned = 0.000700713 Jy ! Component: 200 - total flux cleaned = 0.000824085 Jy ! Total flux subtracted in 200 components = 0.000824085 Jy ! Clean residual min=-0.000574 max=0.000653 Jy/beam ! Clean residual mean=-0.000001 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.108859 Jy ! Adding 85 model components to the UV plane model. ! The established model now contains 98 components and 0.108859 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1 mas, bmaj=1.356 mas, bpa=-4.086 degrees ! Estimated noise=217.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.66972e-05 Jy ! Component: 100 - total flux cleaned = -5.67511e-05 Jy ! Component: 150 - total flux cleaned = -3.97789e-05 Jy ! Component: 200 - total flux cleaned = -2.484e-05 Jy ! Total flux subtracted in 200 components = -2.484e-05 Jy ! Clean residual min=-0.000550 max=0.000607 Jy/beam ! Clean residual mean=-0.000000 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.108835 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 111 components and 0.108835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076318Jy sigma=0.000660 ! Fit after self-cal, rms=0.076317Jy sigma=0.000660 wmodel J1705+5109_X_2017_06_10_pus_map.mod ! Writing 111 model components to file: J1705+5109_X_2017_06_10_pus_map.mod wobs J1705+5109_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1705+5109_X_2017_06_10_pus_uvs.fits wwins J1705+5109_X_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1705+5109_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.71458e-05 Jy ! Component: 100 - total flux cleaned = 0.000106199 Jy ! Component: 150 - total flux cleaned = 0.000200298 Jy ! Component: 200 - total flux cleaned = 0.000263514 Jy ! Component: 250 - total flux cleaned = 0.000315957 Jy ! Component: 300 - total flux cleaned = 0.000367042 Jy ! Component: 350 - total flux cleaned = 0.00041648 Jy ! Component: 400 - total flux cleaned = 0.000424381 Jy ! Component: 450 - total flux cleaned = 0.000432277 Jy ! Component: 500 - total flux cleaned = 0.00046342 Jy ! Component: 550 - total flux cleaned = 0.000455894 Jy ! Component: 600 - total flux cleaned = 0.000486015 Jy ! Component: 650 - total flux cleaned = 0.000500926 Jy ! Component: 700 - total flux cleaned = 0.000522706 Jy ! Component: 750 - total flux cleaned = 0.000508516 Jy ! Component: 800 - total flux cleaned = 0.000522632 Jy ! Component: 850 - total flux cleaned = 0.00052251 Jy ! Component: 900 - total flux cleaned = 0.000515651 Jy ! Component: 950 - total flux cleaned = 0.000515555 Jy ! Component: 1000 - total flux cleaned = 0.000489077 Jy ! Component: 1050 - total flux cleaned = 0.000489006 Jy ! Component: 1100 - total flux cleaned = 0.000476012 Jy ! Component: 1150 - total flux cleaned = 0.000463171 Jy ! Component: 1200 - total flux cleaned = 0.00045051 Jy ! Component: 1250 - total flux cleaned = 0.000450577 Jy ! Component: 1300 - total flux cleaned = 0.00044431 Jy ! Component: 1350 - total flux cleaned = 0.000444212 Jy ! Component: 1400 - total flux cleaned = 0.000438142 Jy ! Component: 1450 - total flux cleaned = 0.00043818 Jy ! Component: 1500 - total flux cleaned = 0.000438221 Jy ! Component: 1550 - total flux cleaned = 0.000449998 Jy ! Component: 1600 - total flux cleaned = 0.000450052 Jy ! Component: 1650 - total flux cleaned = 0.000450015 Jy ! Component: 1700 - total flux cleaned = 0.000426962 Jy ! Component: 1750 - total flux cleaned = 0.0004213 Jy ! Component: 1800 - total flux cleaned = 0.000444039 Jy ! Component: 1850 - total flux cleaned = 0.000432855 Jy ! Component: 1900 - total flux cleaned = 0.000438435 Jy ! Component: 1950 - total flux cleaned = 0.000432852 Jy ! Component: 2000 - total flux cleaned = 0.000438428 Jy ! Total flux subtracted in 2048 components = 0.000460269 Jy ! Clean residual min=-0.000274 max=0.000379 Jy/beam ! Clean residual mean=0.000000 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.109295 Jy keep ! Adding 157 model components to the UV plane model. ! The established model now contains 268 components and 0.109295 Jy ![Exited script file: muppet] wmap "J1705+5109_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1 x 1.356 at -4.086 degrees (North through East) ! Clean map min=-0.00044431 max=0.08415 Jy/beam ! Writing clean map to FITS file: J1705+5109_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0841502 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000100995 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.360053 0.360053 0.720105 1.44021 2.88042 5.76084 11.5217 23.0434 46.0868 92.1735 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.084 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1 x 1.356 at -4.086 degrees (North through East) ! Clean map min=-0.00044431 max=0.08415 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1705+5109_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:50:19 2019