! Started logfile: J1704-1316_S_2017_01_21_pus_uvs.log on Sun May 5 15:59:17 2019 obs J1704-1316_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1704-1316_S_2017_01_21_pus_uva.fits ! AN table 1: 218 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.655708 visibilities/baseline/integration-bin. ! Found source: J1704-1316 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 20584 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1704-1316_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 357 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1065 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.936317Jy sigma=0.006211 ! Fit after self-cal, rms=0.904786Jy sigma=0.006048 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.28 mas, bmaj=6.062 mas, bpa=-5.022 degrees ! Estimated noise=1954.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0777307 Jy ! Component: 100 - total flux cleaned = 0.0969083 Jy ! Total flux subtracted in 100 components = 0.0969083 Jy ! Clean residual min=-0.006965 max=0.009749 Jy/beam ! Clean residual mean=0.000004 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 0.0969083 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0969083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116027Jy sigma=0.000676 ! Fit after self-cal, rms=0.115845Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.651 mas, bmaj=6.626 mas, bpa=-4.831 degrees ! Estimated noise=825.915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137872 Jy ! Component: 100 - total flux cleaned = 0.0216848 Jy ! Component: 150 - total flux cleaned = 0.026767 Jy ! Component: 200 - total flux cleaned = 0.0302826 Jy ! Total flux subtracted in 200 components = 0.0302826 Jy ! Clean residual min=-0.004458 max=0.005245 Jy/beam ! Clean residual mean=0.000013 rms=0.001205 Jy/beam ! Combined flux in latest and established models = 0.127191 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 29 components and 0.127191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114401Jy sigma=0.000661 ! Fit after self-cal, rms=0.114124Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.93 LA 1.02 ! MK 1.05 NL 1.04 OV 1.25 PT 0.97 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.98 LA 0.95 ! MK 1.06 NL 1.03 OV 1.36 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00* HN 1.08 LA 0.96 ! MK 1.07 NL 0.99 OV 1.17 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 0.95 LA 0.85 ! MK 0.92 NL 1.00* OV 1.16 PT 0.92 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.114124Jy sigma=0.000659 ! Fit after self-cal, rms=0.121144Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=6.625 mas, bpa=-4.278 degrees ! Estimated noise=815.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00328021 Jy ! Component: 100 - total flux cleaned = 0.00439492 Jy ! Component: 150 - total flux cleaned = 0.00464678 Jy ! Component: 200 - total flux cleaned = 0.00480197 Jy ! Total flux subtracted in 200 components = 0.00480197 Jy ! Clean residual min=-0.003133 max=0.002989 Jy/beam ! Clean residual mean=0.000004 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.131993 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 0.131993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121035Jy sigma=0.000655 ! Fit after self-cal, rms=0.121390Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121390Jy sigma=0.000654 ! Fit after self-cal, rms=0.127944Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=6.62 mas, bpa=-4.31 degrees ! Estimated noise=819.409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172839 Jy ! Component: 100 - total flux cleaned = 0.00265047 Jy ! Component: 150 - total flux cleaned = 0.00272492 Jy ! Component: 200 - total flux cleaned = 0.00275425 Jy ! Total flux subtracted in 200 components = 0.00275425 Jy ! Clean residual min=-0.002528 max=0.002230 Jy/beam ! Clean residual mean=0.000002 rms=0.000570 Jy/beam ! Combined flux in latest and established models = 0.134747 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 59 components and 0.134747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127909Jy sigma=0.000651 ! Fit after self-cal, rms=0.128261Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681921 Jy ! Component: 100 - total flux cleaned = 0.000812342 Jy ! Component: 150 - total flux cleaned = 0.000757446 Jy ! Component: 200 - total flux cleaned = 0.000710972 Jy ! Total flux subtracted in 200 components = 0.000710972 Jy ! Clean residual min=-0.002392 max=0.002265 Jy/beam ! Clean residual mean=0.000002 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.135458 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.135458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128243Jy sigma=0.000651 ! Fit after self-cal, rms=0.128227Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128227Jy sigma=0.000651 ! Fit after self-cal, rms=0.132617Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=6.621 mas, bpa=-4.292 degrees ! Estimated noise=818.145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000583983 Jy ! Component: 100 - total flux cleaned = 0.000849169 Jy ! Component: 150 - total flux cleaned = 0.000919509 Jy ! Component: 200 - total flux cleaned = 0.00104463 Jy ! Total flux subtracted in 200 components = 0.00104463 Jy ! Clean residual min=-0.002099 max=0.001968 Jy/beam ! Clean residual mean=0.000002 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.136503 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 79 components and 0.136503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132599Jy sigma=0.000650 ! Fit after self-cal, rms=0.132791Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184236 Jy ! Component: 100 - total flux cleaned = 0.000207116 Jy ! Component: 150 - total flux cleaned = 0.000261629 Jy ! Component: 200 - total flux cleaned = 0.000373632 Jy ! Total flux subtracted in 200 components = 0.000373632 Jy ! Clean residual min=-0.002030 max=0.002024 Jy/beam ! Clean residual mean=0.000002 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.136876 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.136876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132780Jy sigma=0.000650 ! Fit after self-cal, rms=0.132779Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132779Jy sigma=0.000650 ! Fit after self-cal, rms=0.133918Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.187 mas, bmaj=11.99 mas, bpa=3.872 degrees ! Estimated noise=1178.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110258 Jy ! Component: 100 - total flux cleaned = 0.00174572 Jy ! Component: 150 - total flux cleaned = 0.002161 Jy ! Component: 200 - total flux cleaned = 0.00230174 Jy ! Total flux subtracted in 200 components = 0.00230174 Jy ! Clean residual min=-0.002364 max=0.002529 Jy/beam ! Clean residual mean=0.000001 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.139178 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 96 components and 0.139178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133925Jy sigma=0.000650 ! Fit after self-cal, rms=0.133982Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000333949 Jy ! Component: 100 - total flux cleaned = 0.000380215 Jy ! Component: 150 - total flux cleaned = 0.000400167 Jy ! Component: 200 - total flux cleaned = 0.000409714 Jy ! Total flux subtracted in 200 components = 0.000409714 Jy ! Clean residual min=-0.002399 max=0.002531 Jy/beam ! Clean residual mean=0.000001 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.139588 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 102 components and 0.139588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133984Jy sigma=0.000650 ! Fit after self-cal, rms=0.133983Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=6.619 mas, bpa=-4.205 degrees ! Estimated noise=818.015 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.676 x 6.619 at -4.205 degrees (North through East) ! Clean map min=-0.0019033 max=0.10101 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=6.027 mas, bpa=-4.631 degrees ! Estimated noise=1977.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0773816 Jy ! Component: 100 - total flux cleaned = 0.0979665 Jy ! Component: 150 - total flux cleaned = 0.109702 Jy ! Component: 200 - total flux cleaned = 0.117599 Jy ! Total flux subtracted in 200 components = 0.117599 Jy ! Clean residual min=-0.005991 max=0.006650 Jy/beam ! Clean residual mean=-0.000001 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 0.117599 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.117599 Jy ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=6.619 mas, bpa=-4.205 degrees ! Estimated noise=818.015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00699919 Jy ! Component: 100 - total flux cleaned = 0.010992 Jy ! Component: 150 - total flux cleaned = 0.0139076 Jy ! Component: 200 - total flux cleaned = 0.0161217 Jy ! Total flux subtracted in 200 components = 0.0161217 Jy ! Clean residual min=-0.002419 max=0.002409 Jy/beam ! Clean residual mean=0.000003 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.133721 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 40 components and 0.133721 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.187 mas, bmaj=11.99 mas, bpa=3.872 degrees ! Estimated noise=1178.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308389 Jy ! Component: 100 - total flux cleaned = 0.0046788 Jy ! Component: 150 - total flux cleaned = 0.00505491 Jy ! Component: 200 - total flux cleaned = 0.0053843 Jy ! Total flux subtracted in 200 components = 0.0053843 Jy ! Clean residual min=-0.002501 max=0.002404 Jy/beam ! Clean residual mean=0.000001 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.139105 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120267 Jy ! Component: 100 - total flux cleaned = 0.000174377 Jy ! Component: 150 - total flux cleaned = 0.000221321 Jy ! Component: 200 - total flux cleaned = 0.000263723 Jy ! Total flux subtracted in 200 components = 0.000263723 Jy ! Clean residual min=-0.002520 max=0.002399 Jy/beam ! Clean residual mean=0.000001 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.139369 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 64 components and 0.139369 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=6.619 mas, bpa=-4.205 degrees ! Estimated noise=818.015 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000789782 Jy ! Component: 100 - total flux cleaned = -0.000942881 Jy ! Component: 150 - total flux cleaned = -0.00100872 Jy ! Component: 200 - total flux cleaned = -0.00103701 Jy ! Total flux subtracted in 200 components = -0.00103701 Jy ! Clean residual min=-0.002144 max=0.002047 Jy/beam ! Clean residual mean=0.000002 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.138332 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 77 components and 0.138332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133991Jy sigma=0.000650 ! Fit after self-cal, rms=0.133996Jy sigma=0.000650 wmodel J1704-1316_S_2017_01_21_pus_map.mod ! Writing 77 model components to file: J1704-1316_S_2017_01_21_pus_map.mod wobs J1704-1316_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1704-1316_S_2017_01_21_pus_uvs.fits wwins J1704-1316_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1704-1316_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000269794 Jy ! Component: 100 - total flux cleaned = -0.000695697 Jy ! Component: 150 - total flux cleaned = -0.0010001 Jy ! Component: 200 - total flux cleaned = -0.000999892 Jy ! Component: 250 - total flux cleaned = -0.00109393 Jy ! Component: 300 - total flux cleaned = -0.00118559 Jy ! Component: 350 - total flux cleaned = -0.00130451 Jy ! Component: 400 - total flux cleaned = -0.0013337 Jy ! Component: 450 - total flux cleaned = -0.00139126 Jy ! Component: 500 - total flux cleaned = -0.00150279 Jy ! Component: 550 - total flux cleaned = -0.00147558 Jy ! Component: 600 - total flux cleaned = -0.00147556 Jy ! Component: 650 - total flux cleaned = -0.00155453 Jy ! Component: 700 - total flux cleaned = -0.00163203 Jy ! Component: 750 - total flux cleaned = -0.00173433 Jy ! Component: 800 - total flux cleaned = -0.00183453 Jy ! Component: 850 - total flux cleaned = -0.001785 Jy ! Component: 900 - total flux cleaned = -0.00183357 Jy ! Component: 950 - total flux cleaned = -0.001858 Jy ! Component: 1000 - total flux cleaned = -0.00185843 Jy ! Component: 1050 - total flux cleaned = -0.00195075 Jy ! Component: 1100 - total flux cleaned = -0.00185866 Jy ! Component: 1150 - total flux cleaned = -0.00181352 Jy ! Component: 1200 - total flux cleaned = -0.00188081 Jy ! Component: 1250 - total flux cleaned = -0.00190267 Jy ! Component: 1300 - total flux cleaned = -0.00183763 Jy ! Component: 1350 - total flux cleaned = -0.00190241 Jy ! Component: 1400 - total flux cleaned = -0.00183887 Jy ! Component: 1450 - total flux cleaned = -0.00188086 Jy ! Component: 1500 - total flux cleaned = -0.00179801 Jy ! Component: 1550 - total flux cleaned = -0.00183929 Jy ! Component: 1600 - total flux cleaned = -0.00177845 Jy ! Component: 1650 - total flux cleaned = -0.00169819 Jy ! Component: 1700 - total flux cleaned = -0.00175788 Jy ! Component: 1750 - total flux cleaned = -0.00173783 Jy ! Component: 1800 - total flux cleaned = -0.00175707 Jy ! Component: 1850 - total flux cleaned = -0.0017377 Jy ! Component: 1900 - total flux cleaned = -0.0017757 Jy ! Component: 1950 - total flux cleaned = -0.00170037 Jy ! Component: 2000 - total flux cleaned = -0.00166291 Jy ! Component: 2050 - total flux cleaned = -0.00162609 Jy ! Component: 2100 - total flux cleaned = -0.00164468 Jy ! Component: 2150 - total flux cleaned = -0.00169925 Jy ! Component: 2200 - total flux cleaned = -0.00159165 Jy ! Component: 2250 - total flux cleaned = -0.0015739 Jy ! Component: 2300 - total flux cleaned = -0.0015209 Jy ! Component: 2350 - total flux cleaned = -0.00143336 Jy ! Component: 2400 - total flux cleaned = -0.00141592 Jy ! Component: 2450 - total flux cleaned = -0.00134731 Jy ! Component: 2500 - total flux cleaned = -0.00138162 Jy ! Component: 2550 - total flux cleaned = -0.0012294 Jy ! Component: 2600 - total flux cleaned = -0.00121272 Jy ! Component: 2650 - total flux cleaned = -0.00119586 Jy ! Component: 2700 - total flux cleaned = -0.00117927 Jy ! Component: 2750 - total flux cleaned = -0.0010972 Jy ! Component: 2800 - total flux cleaned = -0.00106452 Jy ! Component: 2850 - total flux cleaned = -0.0010161 Jy ! Component: 2900 - total flux cleaned = -0.000952103 Jy ! Component: 2950 - total flux cleaned = -0.000920164 Jy ! Component: 3000 - total flux cleaned = -0.00084121 Jy ! Component: 3050 - total flux cleaned = -0.000825578 Jy ! Component: 3100 - total flux cleaned = -0.000763468 Jy ! Component: 3150 - total flux cleaned = -0.000747982 Jy ! Component: 3200 - total flux cleaned = -0.000747831 Jy ! Component: 3250 - total flux cleaned = -0.000625967 Jy ! Component: 3300 - total flux cleaned = -0.000595661 Jy ! Component: 3350 - total flux cleaned = -0.000535442 Jy ! Component: 3400 - total flux cleaned = -0.00046098 Jy ! Component: 3450 - total flux cleaned = -0.000416458 Jy ! Component: 3500 - total flux cleaned = -0.000298766 Jy ! Component: 3550 - total flux cleaned = -0.000254973 Jy ! Component: 3600 - total flux cleaned = -0.000138896 Jy ! Component: 3650 - total flux cleaned = -8.13006e-05 Jy ! Component: 3700 - total flux cleaned = -2.40976e-05 Jy ! Component: 3750 - total flux cleaned = -1.00124e-05 Jy ! Component: 3800 - total flux cleaned = 7.48265e-05 Jy ! Component: 3850 - total flux cleaned = 0.000159059 Jy ! Component: 3900 - total flux cleaned = 0.000228816 Jy ! Component: 3950 - total flux cleaned = 0.000284285 Jy ! Component: 4000 - total flux cleaned = 0.000353311 Jy ! Component: 4050 - total flux cleaned = 0.00046291 Jy ! Total flux subtracted in 4096 components = 0.000530879 Jy ! Clean residual min=-0.000845 max=0.000819 Jy/beam ! Clean residual mean=0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.138863 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 350 components and 0.138863 Jy ![Exited script file: muppet] wmap "J1704-1316_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.676 x 6.619 at -4.205 degrees (North through East) ! Clean map min=-0.0014494 max=0.10104 Jy/beam ! Writing clean map to FITS file: J1704-1316_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.101043 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000232888 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.691452 0.691452 1.3829 2.76581 5.53162 11.0632 22.1265 44.253 88.5059 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.101 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.676 x 6.619 at -4.205 degrees (North through East) ! Clean map min=-0.0014494 max=0.10104 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1704-1316_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:59:22 2019