! Started logfile: J1700-2610_X_2017_02_19_pus_uvs.log on Sat May  4 21:45:44 2019
obs J1700-2610_X_2017_02_19_pus_uva.fits
! Reading UV FITS file: J1700-2610_X_2017_02_19_pus_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.638889 visibilities/baseline/integration-bin.
! Found source: J1700-2610
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 858 lines of history.
! 
! Reading 8280 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1700-2610_X_2017_02_19_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 49 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 59 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.272765Jy  sigma=0.001914
! Fit after  self-cal, rms=0.261714Jy  sigma=0.001828
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.6182 mas, bmaj=1.56 mas, bpa=-1.801 degrees
! Estimated noise=1645.6 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.859667 Jy
! Component: 100  -  total flux cleaned = 1.05842 Jy
! Total flux subtracted in 100 components = 1.05842 Jy
! Clean residual min=-0.032707 max=0.076607 Jy/beam
! Clean residual mean=0.000168 rms=0.009952 Jy/beam
! Combined flux in latest and established models = 1.05842 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.05842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.230009Jy  sigma=0.001576
! Fit after  self-cal, rms=0.229998Jy  sigma=0.001575
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0842459 Jy
! Component: 100  -  total flux cleaned = 0.130744 Jy
! Total flux subtracted in 100 components = 0.130744 Jy
! Clean residual min=-0.024459 max=0.047294 Jy/beam
! Clean residual mean=0.000090 rms=0.007135 Jy/beam
! Combined flux in latest and established models = 1.18917 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 1.18917 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.181001Jy  sigma=0.001162
! Fit after  self-cal, rms=0.180982Jy  sigma=0.001162
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Added new window around map position (1.2, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0435089 Jy
! Component: 100  -  total flux cleaned = 0.067211 Jy
! Total flux subtracted in 100 components = 0.067211 Jy
! Clean residual min=-0.024373 max=0.035089 Jy/beam
! Clean residual mean=0.000051 rms=0.006347 Jy/beam
! Combined flux in latest and established models = 1.25638 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 1.25638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.166150Jy  sigma=0.001048
! Fit after  self-cal, rms=0.165000Jy  sigma=0.001038
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.7628 mas, bmaj=1.85 mas, bpa=1.114 degrees
! Estimated noise=1099.66 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0315003 Jy
! Component: 100  -  total flux cleaned = 0.0500894 Jy
! Component: 150  -  total flux cleaned = 0.0616949 Jy
! Component: 200  -  total flux cleaned = 0.0661752 Jy
! Total flux subtracted in 200 components = 0.0661752 Jy
! Clean residual min=-0.022200 max=0.026846 Jy/beam
! Clean residual mean=0.000021 rms=0.005875 Jy/beam
! Combined flux in latest and established models = 1.32255 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 32 components and 1.32255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.158754Jy  sigma=0.000983
! Fit after  self-cal, rms=0.158489Jy  sigma=0.000981
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.27     KP        0.97     
!   LA        0.98     MK        0.99     NL        1.02     OV        0.98     
!   PT        1.00*    SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.32     KP        0.96     
!   LA        0.99     MK        1.00     NL        1.02     OV        0.99     
!   PT        1.00*    SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.32     KP        0.99     
!   LA        1.02     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.00*    SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.27     KP        0.97     
!   LA        1.02     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.00*    SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.22     KP        0.97     
!   LA        1.00     MK        1.02     NL        1.02     OV        0.99     
!   PT        1.00*    SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.26     KP        0.97     
!   LA        1.01     MK        0.99     NL        1.02     OV        0.97     
!   PT        1.00*    SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.27     KP        0.97     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.97     
!   PT        1.00*    SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        1.29     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.03     OV        0.97     
!   PT        1.00*    SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.27     KP        0.97     
!   LA        1.02     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.00*    SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.27     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.02     OV        1.01     
!   PT        1.00*    SC        0.96     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.27     KP        0.97     
!   LA        0.97     MK        1.00     NL        1.03     OV        1.00     
!   PT        1.00*    SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00*    KP        0.99     
!   LA        1.01     MK        1.01     NL        1.03     OV        1.00     
!   PT        1.00*    SC        1.00     
! 
! 
! Fit before self-cal, rms=0.158489Jy  sigma=0.000981
! Fit after  self-cal, rms=0.144864Jy  sigma=0.000845
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.7646 mas, bmaj=1.845 mas, bpa=1.601 degrees
! Estimated noise=1097.42 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0091233 Jy
! Component: 100  -  total flux cleaned = -0.00950035 Jy
! Component: 150  -  total flux cleaned = -0.0100434 Jy
! Component: 200  -  total flux cleaned = -0.0107479 Jy
! Total flux subtracted in 200 components = -0.0107479 Jy
! Clean residual min=-0.018851 max=0.016310 Jy/beam
! Clean residual mean=-0.000045 rms=0.004320 Jy/beam
! Combined flux in latest and established models = 1.31181 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 40 components and 1.31181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.142689Jy  sigma=0.000832
! Fit after  self-cal, rms=0.142380Jy  sigma=0.000829
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.142380Jy  sigma=0.000829
! Fit after  self-cal, rms=0.111827Jy  sigma=0.000691
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.765 mas, bmaj=1.847 mas, bpa=1.475 degrees
! Estimated noise=1096.33 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00634136 Jy
! Component: 100  -  total flux cleaned = -0.0062229 Jy
! Component: 150  -  total flux cleaned = -0.00582713 Jy
! Component: 200  -  total flux cleaned = -0.00594284 Jy
! Total flux subtracted in 200 components = -0.00594284 Jy
! Clean residual min=-0.008889 max=0.006231 Jy/beam
! Clean residual mean=-0.000005 rms=0.001839 Jy/beam
! Combined flux in latest and established models = 1.30586 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 46 components and 1.30586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111239Jy  sigma=0.000687
! Fit after  self-cal, rms=0.111174Jy  sigma=0.000686
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00157286 Jy
! Component: 100  -  total flux cleaned = -0.00146196 Jy
! Component: 150  -  total flux cleaned = -0.00136636 Jy
! Component: 200  -  total flux cleaned = -0.00137042 Jy
! Total flux subtracted in 200 components = -0.00137042 Jy
! Clean residual min=-0.008215 max=0.005923 Jy/beam
! Clean residual mean=-0.000004 rms=0.001787 Jy/beam
! Combined flux in latest and established models = 1.30449 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 1.30449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110984Jy  sigma=0.000685
! Fit after  self-cal, rms=0.110958Jy  sigma=0.000684
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110958Jy  sigma=0.000684
! Fit after  self-cal, rms=0.108351Jy  sigma=0.000660
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.7649 mas, bmaj=1.846 mas, bpa=1.495 degrees
! Estimated noise=1095.92 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00460713 Jy
! Component: 100  -  total flux cleaned = -0.00425252 Jy
! Component: 150  -  total flux cleaned = -0.00406025 Jy
! Component: 200  -  total flux cleaned = -0.00422273 Jy
! Total flux subtracted in 200 components = -0.00422273 Jy
! Clean residual min=-0.005037 max=0.003991 Jy/beam
! Clean residual mean=-0.000012 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 1.30027 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 57 components and 1.30027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.108005Jy  sigma=0.000658
! Fit after  self-cal, rms=0.107968Jy  sigma=0.000658
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000892101 Jy
! Component: 100  -  total flux cleaned = -0.00104728 Jy
! Component: 150  -  total flux cleaned = -0.00125639 Jy
! Component: 200  -  total flux cleaned = -0.00138511 Jy
! Total flux subtracted in 200 components = -0.00138511 Jy
! Clean residual min=-0.004546 max=0.004128 Jy/beam
! Clean residual mean=-0.000011 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 1.29889 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 58 components and 1.29889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107829Jy  sigma=0.000657
! Fit after  self-cal, rms=0.107820Jy  sigma=0.000657
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107820Jy  sigma=0.000657
! Fit after  self-cal, rms=0.107846Jy  sigma=0.000656
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=2.129 mas, bmaj=4.826 mas, bpa=5.851 degrees
! Estimated noise=1493.69 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00135115 Jy
! Component: 100  -  total flux cleaned = -0.00142912 Jy
! Component: 150  -  total flux cleaned = -0.00157419 Jy
! Component: 200  -  total flux cleaned = -0.00167306 Jy
! Total flux subtracted in 200 components = -0.00167306 Jy
! Clean residual min=-0.004798 max=0.003772 Jy/beam
! Clean residual mean=-0.000023 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 1.29721 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 65 components and 1.29721 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107773Jy  sigma=0.000656
! Fit after  self-cal, rms=0.107769Jy  sigma=0.000656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000210527 Jy
! Component: 100  -  total flux cleaned = -0.000308916 Jy
! Component: 150  -  total flux cleaned = -0.00042917 Jy
! Component: 200  -  total flux cleaned = -0.000513344 Jy
! Total flux subtracted in 200 components = -0.000513344 Jy
! Clean residual min=-0.004647 max=0.003798 Jy/beam
! Clean residual mean=-0.000023 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 1.2967 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 66 components and 1.2967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107747Jy  sigma=0.000656
! Fit after  self-cal, rms=0.107744Jy  sigma=0.000656
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.7647 mas, bmaj=1.846 mas, bpa=1.509 degrees
! Estimated noise=1095.5 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7647 x 1.846 at 1.509 degrees (North through East)
! Clean map  min=-0.003956  max=1.1347 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107744Jy  sigma=0.000656
! Fit after  self-cal, rms=0.101154Jy  sigma=0.000607
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.7646 mas, bmaj=1.846 mas, bpa=1.47 degrees
! Estimated noise=1095.48 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000933686 Jy
! Component: 100  -  total flux cleaned = -0.00125298 Jy
! Component: 150  -  total flux cleaned = -0.00131948 Jy
! Component: 200  -  total flux cleaned = -0.00144001 Jy
! Total flux subtracted in 200 components = -0.00144001 Jy
! Clean residual min=-0.004166 max=0.003465 Jy/beam
! Clean residual mean=-0.000013 rms=0.000893 Jy/beam
! Combined flux in latest and established models = 1.29526 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 66 components and 1.29526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101011Jy  sigma=0.000606
! Fit after  self-cal, rms=0.101003Jy  sigma=0.000606
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.04585e-05 Jy
! Component: 100  -  total flux cleaned = -0.000223216 Jy
! Component: 150  -  total flux cleaned = -0.000276301 Jy
! Component: 200  -  total flux cleaned = -0.000325004 Jy
! Total flux subtracted in 200 components = -0.000325004 Jy
! Clean residual min=-0.003821 max=0.003319 Jy/beam
! Clean residual mean=-0.000013 rms=0.000875 Jy/beam
! Combined flux in latest and established models = 1.29493 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 67 components and 1.29493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100925Jy  sigma=0.000605
! Fit after  self-cal, rms=0.100924Jy  sigma=0.000605
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100924Jy  sigma=0.000605
! Fit after  self-cal, rms=0.100955Jy  sigma=0.000605
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.6198 mas, bmaj=1.551 mas, bpa=-1.337 degrees
! Estimated noise=1657.57 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.865835 Jy
! Component: 100  -  total flux cleaned = 1.06901 Jy
! Component: 150  -  total flux cleaned = 1.15122 Jy
! Component: 200  -  total flux cleaned = 1.19661 Jy
! Total flux subtracted in 200 components = 1.19661 Jy
! Clean residual min=-0.009085 max=0.022847 Jy/beam
! Clean residual mean=0.000045 rms=0.002977 Jy/beam
! Combined flux in latest and established models = 1.19661 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 1.19661 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.7644 mas, bmaj=1.846 mas, bpa=1.481 degrees
! Estimated noise=1095.25 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0415845 Jy
! Component: 100  -  total flux cleaned = 0.0642429 Jy
! Component: 150  -  total flux cleaned = 0.0774882 Jy
! Component: 200  -  total flux cleaned = 0.0854705 Jy
! Total flux subtracted in 200 components = 0.0854705 Jy
! Clean residual min=-0.003587 max=0.005485 Jy/beam
! Clean residual mean=-0.000004 rms=0.000985 Jy/beam
! Combined flux in latest and established models = 1.28208 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 46 components and 1.28208 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Added new window around map position (-0.8, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00542339 Jy
! Component: 100  -  total flux cleaned = 0.00814618 Jy
! Component: 150  -  total flux cleaned = 0.00894955 Jy
! Component: 200  -  total flux cleaned = 0.0092847 Jy
! Total flux subtracted in 200 components = 0.0092847 Jy
! Clean residual min=-0.002931 max=0.003509 Jy/beam
! Clean residual mean=-0.000009 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 1.29136 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 69 components and 1.29136 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Added new window around map position (4, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00291383 Jy
! Component: 100  -  total flux cleaned = 0.00332635 Jy
! Component: 150  -  total flux cleaned = 0.00374414 Jy
! Component: 200  -  total flux cleaned = 0.00400997 Jy
! Total flux subtracted in 200 components = 0.00400997 Jy
! Clean residual min=-0.002695 max=0.002860 Jy/beam
! Clean residual mean=-0.000006 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 1.29537 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 76 components and 1.29537 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=2.13 mas, bmaj=4.826 mas, bpa=5.845 degrees
! Estimated noise=1493.38 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000352929 Jy
! Component: 100  -  total flux cleaned = -0.000349037 Jy
! Component: 150  -  total flux cleaned = -0.000310194 Jy
! Component: 200  -  total flux cleaned = -0.000342482 Jy
! Total flux subtracted in 200 components = -0.000342482 Jy
! Clean residual min=-0.003715 max=0.003841 Jy/beam
! Clean residual mean=-0.000012 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 1.29503 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.99788e-07 Jy
! Component: 100  -  total flux cleaned = -4.98759e-05 Jy
! Component: 150  -  total flux cleaned = -0.000117893 Jy
! Component: 200  -  total flux cleaned = -0.00017975 Jy
! Total flux subtracted in 200 components = -0.00017975 Jy
! Clean residual min=-0.003682 max=0.003838 Jy/beam
! Clean residual mean=-0.000013 rms=0.001084 Jy/beam
! Combined flux in latest and established models = 1.29485 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 96 components and 1.29485 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! Estimated beam: bmin=0.7644 mas, bmaj=1.846 mas, bpa=1.481 degrees
! Estimated noise=1095.25 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000364427 Jy
! Component: 100  -  total flux cleaned = 0.000452365 Jy
! Component: 150  -  total flux cleaned = 0.000493841 Jy
! Component: 200  -  total flux cleaned = 0.000532635 Jy
! Total flux subtracted in 200 components = 0.000532635 Jy
! Clean residual min=-0.002640 max=0.002926 Jy/beam
! Clean residual mean=-0.000007 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 1.29538 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 109 components and 1.29538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100512Jy  sigma=0.000602
! Fit after  self-cal, rms=0.100484Jy  sigma=0.000602
wmodel J1700-2610_X_2017_02_19_pus_map.mod
! Writing 109 model components to file: J1700-2610_X_2017_02_19_pus_map.mod
wobs J1700-2610_X_2017_02_19_pus_uvs.fits
! Writing UV FITS file: J1700-2610_X_2017_02_19_pus_uvs.fits
wwins J1700-2610_X_2017_02_19_pus_map.win
! wwins: Wrote 4 windows to J1700-2610_X_2017_02_19_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.001104 Jy
! Component: 100  -  total flux cleaned = 0.00152847 Jy
! Component: 150  -  total flux cleaned = 0.0019357 Jy
! Component: 200  -  total flux cleaned = 0.00241663 Jy
! Component: 250  -  total flux cleaned = 0.002797 Jy
! Component: 300  -  total flux cleaned = 0.00308483 Jy
! Component: 350  -  total flux cleaned = 0.00336526 Jy
! Component: 400  -  total flux cleaned = 0.0036383 Jy
! Component: 450  -  total flux cleaned = 0.00379041 Jy
! Component: 500  -  total flux cleaned = 0.0039023 Jy
! Component: 550  -  total flux cleaned = 0.0039749 Jy
! Component: 600  -  total flux cleaned = 0.0040467 Jy
! Component: 650  -  total flux cleaned = 0.00415157 Jy
! Component: 700  -  total flux cleaned = 0.00421946 Jy
! Component: 750  -  total flux cleaned = 0.00435425 Jy
! Component: 800  -  total flux cleaned = 0.00448671 Jy
! Component: 850  -  total flux cleaned = 0.00468125 Jy
! Component: 900  -  total flux cleaned = 0.00471267 Jy
! Component: 950  -  total flux cleaned = 0.00474397 Jy
! Component: 1000  -  total flux cleaned = 0.00480574 Jy
! Component: 1050  -  total flux cleaned = 0.00489716 Jy
! Component: 1100  -  total flux cleaned = 0.00495738 Jy
! Component: 1150  -  total flux cleaned = 0.00498676 Jy
! Component: 1200  -  total flux cleaned = 0.00507463 Jy
! Component: 1250  -  total flux cleaned = 0.00513245 Jy
! Component: 1300  -  total flux cleaned = 0.00518954 Jy
! Component: 1350  -  total flux cleaned = 0.0051896 Jy
! Component: 1400  -  total flux cleaned = 0.00519016 Jy
! Component: 1450  -  total flux cleaned = 0.0051902 Jy
! Component: 1500  -  total flux cleaned = 0.00521718 Jy
! Component: 1550  -  total flux cleaned = 0.00521719 Jy
! Component: 1600  -  total flux cleaned = 0.00513737 Jy
! Component: 1650  -  total flux cleaned = 0.00516332 Jy
! Component: 1700  -  total flux cleaned = 0.00511142 Jy
! Component: 1750  -  total flux cleaned = 0.0051886 Jy
! Component: 1800  -  total flux cleaned = 0.00511188 Jy
! Component: 1850  -  total flux cleaned = 0.0051117 Jy
! Component: 1900  -  total flux cleaned = 0.00506154 Jy
! Component: 1950  -  total flux cleaned = 0.00503677 Jy
! Component: 2000  -  total flux cleaned = 0.00498756 Jy
! Total flux subtracted in 2048 components = 0.00496315 Jy
! Clean residual min=-0.001410 max=0.001210 Jy/beam
! Clean residual mean=-0.000005 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 1.30034 Jy
keep
! Adding 144 model components to the UV plane model.
! The established model now contains 253 components and 1.30035 Jy
![Exited script file: muppet]
wmap "J1700-2610_X_2017_02_19_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7644 x 1.846 at 1.481 degrees (North through East)
! Clean map  min=-0.0020409  max=1.1321 Jy/beam
! Writing clean map to FITS file: J1700-2610_X_2017_02_19_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.13205 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.0854% of the data.
!  The x-axis pixel size should ideally be below 0.1998 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000460635 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.122071 0.122071 0.244141 0.488283 0.976565 1.95313 3.90626 7.81252 15.625 31.2501 62.5002
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.132 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7644 x 1.846 at 1.481 degrees (North through East)
! Clean map  min=-0.0020409  max=1.1321 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J1700-2610_X_2017_02_19_pus_uvs.log closed on Sat May  4 21:45:45 2019