! Started logfile: J1700-2610_S_2017_10_09_pus_uvs.log on Sun May 12 13:16:38 2019 obs J1700-2610_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1700-2610_S_2017_10_09_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.65812 visibilities/baseline/integration-bin. ! Found source: J1700-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1700-2610_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.498083Jy sigma=0.003370 ! Fit after self-cal, rms=0.481620Jy sigma=0.003266 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=14.83 mas, bpa=-18.12 degrees ! Estimated noise=3885.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.650311 Jy ! Component: 100 - total flux cleaned = 0.929437 Jy ! Total flux subtracted in 100 components = 0.929437 Jy ! Clean residual min=-0.070139 max=0.166174 Jy/beam ! Clean residual mean=0.000031 rms=0.030535 Jy/beam ! Combined flux in latest and established models = 0.929437 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.929437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396902Jy sigma=0.002395 ! Fit after self-cal, rms=0.396733Jy sigma=0.002394 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=16.57 mas, bpa=-18.46 degrees ! Estimated noise=3376.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.216621 Jy ! Component: 100 - total flux cleaned = 0.339942 Jy ! Component: 150 - total flux cleaned = 0.415181 Jy ! Component: 200 - total flux cleaned = 0.461492 Jy ! Total flux subtracted in 200 components = 0.461492 Jy ! Clean residual min=-0.037529 max=0.049156 Jy/beam ! Clean residual mean=-0.000156 rms=0.013522 Jy/beam ! Combined flux in latest and established models = 1.39093 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 68 components and 1.39093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221839Jy sigma=0.001303 ! Fit after self-cal, rms=0.221722Jy sigma=0.001302 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 1.32 KP 1.08 ! LA 1.04 MK 1.04 NL 0.91 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.42 KP 1.03 ! LA 0.98 MK 1.00 NL 0.74 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.01 HN 1.32 KP 0.90 ! LA 0.78 MK 1.07 NL 1.18 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.18 HN 1.07 KP 1.00* ! LA 1.05 MK 1.00 NL 1.00* OV 1.00* ! PT 0.96 ! ! ! Fit before self-cal, rms=0.221722Jy sigma=0.001302 ! Fit after self-cal, rms=0.127617Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.018 mas, bmaj=16.93 mas, bpa=-19.11 degrees ! Estimated noise=3472.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0202327 Jy ! Component: 100 - total flux cleaned = -0.0235715 Jy ! Component: 150 - total flux cleaned = -0.0246562 Jy ! Component: 200 - total flux cleaned = -0.0246398 Jy ! Total flux subtracted in 200 components = -0.0246398 Jy ! Clean residual min=-0.028378 max=0.015990 Jy/beam ! Clean residual mean=-0.000008 rms=0.005662 Jy/beam ! Combined flux in latest and established models = 1.36629 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 1.36629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120566Jy sigma=0.000734 ! Fit after self-cal, rms=0.120588Jy sigma=0.000734 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120588Jy sigma=0.000734 ! Fit after self-cal, rms=0.121091Jy sigma=0.000725 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=17.01 mas, bpa=-19.24 degrees ! Estimated noise=3504.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0134229 Jy ! Component: 100 - total flux cleaned = -0.0149429 Jy ! Component: 150 - total flux cleaned = -0.0153623 Jy ! Component: 200 - total flux cleaned = -0.0153766 Jy ! Total flux subtracted in 200 components = -0.0153766 Jy ! Clean residual min=-0.023750 max=0.013729 Jy/beam ! Clean residual mean=0.000001 rms=0.004704 Jy/beam ! Combined flux in latest and established models = 1.35091 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 102 components and 1.35091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117184Jy sigma=0.000704 ! Fit after self-cal, rms=0.117187Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000302043 Jy ! Component: 100 - total flux cleaned = -0.000572696 Jy ! Component: 150 - total flux cleaned = -0.000801944 Jy ! Component: 200 - total flux cleaned = -0.0010079 Jy ! Total flux subtracted in 200 components = -0.0010079 Jy ! Clean residual min=-0.021179 max=0.013709 Jy/beam ! Clean residual mean=0.000000 rms=0.004565 Jy/beam ! Combined flux in latest and established models = 1.3499 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 105 components and 1.3499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116234Jy sigma=0.000698 ! Fit after self-cal, rms=0.116235Jy sigma=0.000698 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116235Jy sigma=0.000698 ! Fit after self-cal, rms=0.116753Jy sigma=0.000690 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=17.12 mas, bpa=-19.39 degrees ! Estimated noise=3535.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00847184 Jy ! Component: 100 - total flux cleaned = -0.0104493 Jy ! Component: 150 - total flux cleaned = -0.0114903 Jy ! Component: 200 - total flux cleaned = -0.0117194 Jy ! Total flux subtracted in 200 components = -0.0117194 Jy ! Clean residual min=-0.018540 max=0.011542 Jy/beam ! Clean residual mean=0.000000 rms=0.003791 Jy/beam ! Combined flux in latest and established models = 1.33818 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 124 components and 1.33819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114776Jy sigma=0.000680 ! Fit after self-cal, rms=0.114782Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000201097 Jy ! Component: 100 - total flux cleaned = -0.000204218 Jy ! Component: 150 - total flux cleaned = -0.000212052 Jy ! Component: 200 - total flux cleaned = -0.000216679 Jy ! Total flux subtracted in 200 components = -0.000216679 Jy ! Clean residual min=-0.017108 max=0.011376 Jy/beam ! Clean residual mean=-0.000000 rms=0.003721 Jy/beam ! Combined flux in latest and established models = 1.33797 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 127 components and 1.33797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114366Jy sigma=0.000678 ! Fit after self-cal, rms=0.114365Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114365Jy sigma=0.000678 ! Fit after self-cal, rms=0.115036Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.047 mas, bmaj=25.36 mas, bpa=-5.758 degrees ! Estimated noise=4280.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00533018 Jy ! Component: 100 - total flux cleaned = -0.00619185 Jy ! Component: 150 - total flux cleaned = -0.00611472 Jy ! Component: 200 - total flux cleaned = -0.0061857 Jy ! Total flux subtracted in 200 components = -0.0061857 Jy ! Clean residual min=-0.017173 max=0.010948 Jy/beam ! Clean residual mean=0.000006 rms=0.003819 Jy/beam ! Combined flux in latest and established models = 1.33178 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 147 components and 1.33178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114423Jy sigma=0.000670 ! Fit after self-cal, rms=0.114432Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.20658e-05 Jy ! Component: 100 - total flux cleaned = 5.78148e-05 Jy ! Component: 150 - total flux cleaned = 5.79107e-05 Jy ! Component: 200 - total flux cleaned = 6.15302e-05 Jy ! Total flux subtracted in 200 components = 6.15302e-05 Jy ! Clean residual min=-0.016866 max=0.011021 Jy/beam ! Clean residual mean=0.000005 rms=0.003800 Jy/beam ! Combined flux in latest and established models = 1.33184 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 151 components and 1.33184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114259Jy sigma=0.000670 ! Fit after self-cal, rms=0.114260Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=17.21 mas, bpa=-19.5 degrees ! Estimated noise=3555.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 17.21 at -19.5 degrees (North through East) ! Clean map min=-0.021068 max=0.91568 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114260Jy sigma=0.000670 ! Fit after self-cal, rms=0.103799Jy sigma=0.000603 ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=17.21 mas, bpa=-19.51 degrees ! Estimated noise=3562.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00568915 Jy ! Component: 100 - total flux cleaned = -0.00717154 Jy ! Component: 150 - total flux cleaned = -0.00768894 Jy ! Component: 200 - total flux cleaned = -0.0081164 Jy ! Total flux subtracted in 200 components = -0.0081164 Jy ! Clean residual min=-0.014256 max=0.010322 Jy/beam ! Clean residual mean=0.000006 rms=0.003034 Jy/beam ! Combined flux in latest and established models = 1.32373 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 158 components and 1.32373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102825Jy sigma=0.000599 ! Fit after self-cal, rms=0.102819Jy sigma=0.000599 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120265 Jy ! Component: 100 - total flux cleaned = -0.000119791 Jy ! Component: 150 - total flux cleaned = -0.000213144 Jy ! Component: 200 - total flux cleaned = -0.000125975 Jy ! Total flux subtracted in 200 components = -0.000125975 Jy ! Clean residual min=-0.013448 max=0.010207 Jy/beam ! Clean residual mean=0.000006 rms=0.002996 Jy/beam ! Combined flux in latest and established models = 1.3236 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 168 components and 1.3236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102608Jy sigma=0.000598 ! Fit after self-cal, rms=0.102609Jy sigma=0.000598 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102609Jy sigma=0.000598 ! Fit after self-cal, rms=0.103211Jy sigma=0.000596 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=15.11 mas, bpa=-19.18 degrees ! Estimated noise=4311.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.700277 Jy ! Component: 100 - total flux cleaned = 0.959843 Jy ! Component: 150 - total flux cleaned = 1.0939 Jy ! Component: 200 - total flux cleaned = 1.16763 Jy ! Total flux subtracted in 200 components = 1.16763 Jy ! Clean residual min=-0.022191 max=0.045910 Jy/beam ! Clean residual mean=0.000012 rms=0.009421 Jy/beam ! Combined flux in latest and established models = 1.16763 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 1.16763 Jy ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=17.27 mas, bpa=-19.58 degrees ! Estimated noise=3574.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-35, 67). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670089 Jy ! Component: 100 - total flux cleaned = 0.102946 Jy ! Component: 150 - total flux cleaned = 0.123459 Jy ! Component: 200 - total flux cleaned = 0.135879 Jy ! Total flux subtracted in 200 components = 0.135879 Jy ! Clean residual min=-0.010645 max=0.011587 Jy/beam ! Clean residual mean=-0.000010 rms=0.002965 Jy/beam ! Combined flux in latest and established models = 1.30351 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 102 components and 1.30351 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.116 mas, bmaj=25.36 mas, bpa=-5.773 degrees ! Estimated noise=4267.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726444 Jy ! Component: 100 - total flux cleaned = 0.00943136 Jy ! Component: 150 - total flux cleaned = 0.0111545 Jy ! Component: 200 - total flux cleaned = 0.0119592 Jy ! Total flux subtracted in 200 components = 0.0119592 Jy ! Clean residual min=-0.008652 max=0.007517 Jy/beam ! Clean residual mean=-0.000004 rms=0.002735 Jy/beam ! Combined flux in latest and established models = 1.31547 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000643002 Jy ! Component: 100 - total flux cleaned = 0.000754952 Jy ! Component: 150 - total flux cleaned = 0.000853897 Jy ! Component: 200 - total flux cleaned = 0.000848891 Jy ! Total flux subtracted in 200 components = 0.000848891 Jy ! Clean residual min=-0.008106 max=0.007455 Jy/beam ! Clean residual mean=-0.000005 rms=0.002583 Jy/beam ! Combined flux in latest and established models = 1.31632 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 184 components and 1.31632 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.093 mas, bmaj=17.27 mas, bpa=-19.58 degrees ! Estimated noise=3574.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000452035 Jy ! Component: 100 - total flux cleaned = 8.73698e-05 Jy ! Component: 150 - total flux cleaned = 0.000201856 Jy ! Component: 200 - total flux cleaned = 0.000201917 Jy ! Total flux subtracted in 200 components = 0.000201917 Jy ! Clean residual min=-0.006486 max=0.007182 Jy/beam ! Clean residual mean=-0.000006 rms=0.001974 Jy/beam ! Combined flux in latest and established models = 1.31652 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 210 components and 1.31652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099986Jy sigma=0.000583 ! Fit after self-cal, rms=0.099668Jy sigma=0.000581 wmodel J1700-2610_S_2017_10_09_pus_map.mod ! Writing 210 model components to file: J1700-2610_S_2017_10_09_pus_map.mod wobs J1700-2610_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1700-2610_S_2017_10_09_pus_uvs.fits wwins J1700-2610_S_2017_10_09_pus_map.win ! wwins: Wrote 2 windows to J1700-2610_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00100934 Jy ! Component: 100 - total flux cleaned = 0.00166888 Jy ! Component: 150 - total flux cleaned = 0.00247064 Jy ! Component: 200 - total flux cleaned = 0.00330625 Jy ! Component: 250 - total flux cleaned = 0.00425781 Jy ! Component: 300 - total flux cleaned = 0.00450694 Jy ! Component: 350 - total flux cleaned = 0.00482366 Jy ! Component: 400 - total flux cleaned = 0.00482594 Jy ! Component: 450 - total flux cleaned = 0.00490086 Jy ! Component: 500 - total flux cleaned = 0.00497203 Jy ! Component: 550 - total flux cleaned = 0.00517233 Jy ! Component: 600 - total flux cleaned = 0.00530276 Jy ! Component: 650 - total flux cleaned = 0.00542946 Jy ! Component: 700 - total flux cleaned = 0.00567429 Jy ! Component: 750 - total flux cleaned = 0.00573291 Jy ! Component: 800 - total flux cleaned = 0.00573161 Jy ! Component: 850 - total flux cleaned = 0.00567473 Jy ! Component: 900 - total flux cleaned = 0.00572866 Jy ! Component: 950 - total flux cleaned = 0.00588848 Jy ! Component: 1000 - total flux cleaned = 0.00609697 Jy ! Component: 1050 - total flux cleaned = 0.00619879 Jy ! Component: 1100 - total flux cleaned = 0.00629961 Jy ! Component: 1150 - total flux cleaned = 0.00644741 Jy ! Component: 1200 - total flux cleaned = 0.00649572 Jy ! Component: 1250 - total flux cleaned = 0.00659039 Jy ! Component: 1300 - total flux cleaned = 0.00672956 Jy ! Component: 1350 - total flux cleaned = 0.00695815 Jy ! Component: 1400 - total flux cleaned = 0.00695734 Jy ! Component: 1450 - total flux cleaned = 0.0070459 Jy ! Component: 1500 - total flux cleaned = 0.00708949 Jy ! Component: 1550 - total flux cleaned = 0.00708954 Jy ! Component: 1600 - total flux cleaned = 0.00717538 Jy ! Component: 1650 - total flux cleaned = 0.00713268 Jy ! Component: 1700 - total flux cleaned = 0.00717415 Jy ! Component: 1750 - total flux cleaned = 0.00709196 Jy ! Component: 1800 - total flux cleaned = 0.00713286 Jy ! Component: 1850 - total flux cleaned = 0.00713292 Jy ! Component: 1900 - total flux cleaned = 0.00721249 Jy ! Component: 1950 - total flux cleaned = 0.00717306 Jy ! Component: 2000 - total flux cleaned = 0.00713384 Jy ! Component: 2050 - total flux cleaned = 0.0071724 Jy ! Component: 2100 - total flux cleaned = 0.00717254 Jy ! Component: 2150 - total flux cleaned = 0.0070577 Jy ! Component: 2200 - total flux cleaned = 0.00694387 Jy ! Component: 2250 - total flux cleaned = 0.00671798 Jy ! Component: 2300 - total flux cleaned = 0.00664304 Jy ! Component: 2350 - total flux cleaned = 0.00649427 Jy ! Component: 2400 - total flux cleaned = 0.00638375 Jy ! Component: 2450 - total flux cleaned = 0.0062741 Jy ! Component: 2500 - total flux cleaned = 0.00616485 Jy ! Component: 2550 - total flux cleaned = 0.00609206 Jy ! Component: 2600 - total flux cleaned = 0.0059477 Jy ! Component: 2650 - total flux cleaned = 0.00584007 Jy ! Component: 2700 - total flux cleaned = 0.00573301 Jy ! Component: 2750 - total flux cleaned = 0.00555522 Jy ! Component: 2800 - total flux cleaned = 0.00541375 Jy ! Component: 2850 - total flux cleaned = 0.00527297 Jy ! Component: 2900 - total flux cleaned = 0.00509741 Jy ! Component: 2950 - total flux cleaned = 0.00492275 Jy ! Component: 3000 - total flux cleaned = 0.00471374 Jy ! Component: 3050 - total flux cleaned = 0.00457477 Jy ! Component: 3100 - total flux cleaned = 0.00440148 Jy ! Component: 3150 - total flux cleaned = 0.0043322 Jy ! Component: 3200 - total flux cleaned = 0.00419387 Jy ! Component: 3250 - total flux cleaned = 0.00402117 Jy ! Component: 3300 - total flux cleaned = 0.00395217 Jy ! Component: 3350 - total flux cleaned = 0.00388314 Jy ! Component: 3400 - total flux cleaned = 0.00388328 Jy ! Component: 3450 - total flux cleaned = 0.00377991 Jy ! Component: 3500 - total flux cleaned = 0.00374542 Jy ! Component: 3550 - total flux cleaned = 0.0037111 Jy ! Component: 3600 - total flux cleaned = 0.00364243 Jy ! Component: 3650 - total flux cleaned = 0.00357382 Jy ! Component: 3700 - total flux cleaned = 0.00350499 Jy ! Component: 3750 - total flux cleaned = 0.0034704 Jy ! Component: 3800 - total flux cleaned = 0.0034016 Jy ! Component: 3850 - total flux cleaned = 0.0033328 Jy ! Component: 3900 - total flux cleaned = 0.00326417 Jy ! Component: 3950 - total flux cleaned = 0.00322953 Jy ! Component: 4000 - total flux cleaned = 0.00326395 Jy ! Component: 4050 - total flux cleaned = 0.00322961 Jy ! Total flux subtracted in 4096 components = 0.00322968 Jy ! Clean residual min=-0.001940 max=0.001883 Jy/beam ! Clean residual mean=-0.000034 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 1.31975 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 464 components and 1.31975 Jy ![Exited script file: muppet] wmap "J1700-2610_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.093 x 17.27 at -19.58 degrees (North through East) ! Clean map min=-0.0064123 max=0.92965 Jy/beam ! Writing clean map to FITS file: J1700-2610_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.929649 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000640517 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.206696 0.206696 0.413393 0.826785 1.65357 3.30714 6.61428 13.2286 26.4571 52.9142 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.929 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.093 x 17.27 at -19.58 degrees (North through East) ! Clean map min=-0.0064123 max=0.92965 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1700-2610_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:16:43 2019