! Started logfile: J1700-2610_S_2017_06_15_pus_uvs.log on Tue May 7 15:23:57 2019 obs J1700-2610_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J1700-2610_S_2017_06_15_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.42 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1700-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 1512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1700-2610_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 152 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.609109Jy sigma=0.004417 ! Fit after self-cal, rms=0.584437Jy sigma=0.004241 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.488 mas, bmaj=11.01 mas, bpa=21.47 degrees ! Estimated noise=3414.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.452694 Jy ! Component: 100 - total flux cleaned = 0.661359 Jy ! Total flux subtracted in 100 components = 0.661359 Jy ! Clean residual min=-0.091140 max=0.178766 Jy/beam ! Clean residual mean=0.003405 rms=0.039436 Jy/beam ! Combined flux in latest and established models = 0.661359 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.661359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.463232Jy sigma=0.003498 ! Fit after self-cal, rms=0.463160Jy sigma=0.003497 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.906 mas, bmaj=11.9 mas, bpa=19.88 degrees ! Estimated noise=2928.02 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.232471 Jy ! Component: 100 - total flux cleaned = 0.371869 Jy ! Component: 150 - total flux cleaned = 0.464391 Jy ! Component: 200 - total flux cleaned = 0.528303 Jy ! Total flux subtracted in 200 components = 0.528303 Jy ! Clean residual min=-0.080899 max=0.161430 Jy/beam ! Clean residual mean=0.002904 rms=0.033691 Jy/beam ! Combined flux in latest and established models = 1.18966 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 79 components and 1.18966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317570Jy sigma=0.002402 ! Fit after self-cal, rms=0.317497Jy sigma=0.002401 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.67 FD 0.84 HN 4.76 KP 0.97 ! LA 0.96 MK 0.89 NL 0.83 OV 0.81 ! PT 0.97 SC 1.14 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 5.81 FD 0.86 HN 5.37 KP 0.94 ! LA 0.91 MK 0.97 NL 1.01 OV 0.80 ! PT 0.94 SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.82 FD 0.88 HN 5.61 KP 0.94 ! LA 0.92 MK 1.02 NL 1.02 OV 0.72 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.317497Jy sigma=0.002401 ! Fit after self-cal, rms=0.363412Jy sigma=0.000996 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.066 mas, bmaj=11.84 mas, bpa=18.5 degrees ! Estimated noise=3222.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0200544 Jy ! Component: 100 - total flux cleaned = -0.0261567 Jy ! Component: 150 - total flux cleaned = -0.0313906 Jy ! Component: 200 - total flux cleaned = -0.0359968 Jy ! Total flux subtracted in 200 components = -0.0359968 Jy ! Clean residual min=-0.032199 max=0.027872 Jy/beam ! Clean residual mean=0.001313 rms=0.008497 Jy/beam ! Combined flux in latest and established models = 1.15367 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 95 components and 1.15367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352249Jy sigma=0.000935 ! Fit after self-cal, rms=0.352787Jy sigma=0.000934 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352787Jy sigma=0.000934 ! Fit after self-cal, rms=0.359782Jy sigma=0.000920 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.051 mas, bmaj=11.85 mas, bpa=19.23 degrees ! Estimated noise=3227.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0148293 Jy ! Component: 100 - total flux cleaned = -0.0191603 Jy ! Component: 150 - total flux cleaned = -0.022338 Jy ! Component: 200 - total flux cleaned = -0.0251849 Jy ! Total flux subtracted in 200 components = -0.0251849 Jy ! Clean residual min=-0.028175 max=0.022873 Jy/beam ! Clean residual mean=0.001038 rms=0.007505 Jy/beam ! Combined flux in latest and established models = 1.12848 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 104 components and 1.12848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.353787Jy sigma=0.000891 ! Fit after self-cal, rms=0.353622Jy sigma=0.000891 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00258127 Jy ! Component: 100 - total flux cleaned = -0.0049309 Jy ! Component: 150 - total flux cleaned = -0.00664802 Jy ! Component: 200 - total flux cleaned = -0.00863666 Jy ! Total flux subtracted in 200 components = -0.00863666 Jy ! Clean residual min=-0.027448 max=0.022024 Jy/beam ! Clean residual mean=0.001206 rms=0.007393 Jy/beam ! Combined flux in latest and established models = 1.11984 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 109 components and 1.11984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350810Jy sigma=0.000883 ! Fit after self-cal, rms=0.350740Jy sigma=0.000883 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350740Jy sigma=0.000883 ! Fit after self-cal, rms=0.350002Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.077 mas, bmaj=11.84 mas, bpa=19.51 degrees ! Estimated noise=3232.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0123093 Jy ! Component: 100 - total flux cleaned = -0.0141366 Jy ! Component: 150 - total flux cleaned = -0.0156407 Jy ! Component: 200 - total flux cleaned = -0.0169754 Jy ! Total flux subtracted in 200 components = -0.0169754 Jy ! Clean residual min=-0.013294 max=0.013896 Jy/beam ! Clean residual mean=0.000688 rms=0.003649 Jy/beam ! Combined flux in latest and established models = 1.10287 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 115 components and 1.10287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.348135Jy sigma=0.000674 ! Fit after self-cal, rms=0.348061Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142584 Jy ! Component: 100 - total flux cleaned = -0.00247765 Jy ! Component: 150 - total flux cleaned = -0.00361204 Jy ! Component: 200 - total flux cleaned = -0.0046277 Jy ! Total flux subtracted in 200 components = -0.0046277 Jy ! Clean residual min=-0.012655 max=0.014322 Jy/beam ! Clean residual mean=0.000783 rms=0.003556 Jy/beam ! Combined flux in latest and established models = 1.09824 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 117 components and 1.09824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347343Jy sigma=0.000671 ! Fit after self-cal, rms=0.347309Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347309Jy sigma=0.000671 ! Fit after self-cal, rms=0.359556Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.224 mas, bmaj=23.53 mas, bpa=17.21 degrees ! Estimated noise=3544.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00889591 Jy ! Component: 100 - total flux cleaned = -0.0112904 Jy ! Component: 150 - total flux cleaned = -0.0123028 Jy ! Component: 200 - total flux cleaned = -0.0132709 Jy ! Total flux subtracted in 200 components = -0.0132709 Jy ! Clean residual min=-0.011396 max=0.012157 Jy/beam ! Clean residual mean=0.000997 rms=0.003655 Jy/beam ! Combined flux in latest and established models = 1.08497 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 117 components and 1.08497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358740Jy sigma=0.000662 ! Fit after self-cal, rms=0.358703Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000716997 Jy ! Component: 100 - total flux cleaned = -0.00092634 Jy ! Component: 150 - total flux cleaned = -0.000926154 Jy ! Component: 200 - total flux cleaned = -0.00092443 Jy ! Total flux subtracted in 200 components = -0.00092443 Jy ! Clean residual min=-0.010849 max=0.011980 Jy/beam ! Clean residual mean=0.001028 rms=0.003626 Jy/beam ! Combined flux in latest and established models = 1.08405 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 118 components and 1.08405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358439Jy sigma=0.000662 ! Fit after self-cal, rms=0.358422Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.077 mas, bmaj=11.86 mas, bpa=19.67 degrees ! Estimated noise=3237.46 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.077 x 11.86 at 19.67 degrees (North through East) ! Clean map min=-0.011983 max=0.63459 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358422Jy sigma=0.000662 ! Fit after self-cal, rms=0.387248Jy sigma=0.000597 ! Inverting map and beam ! Estimated beam: bmin=4.076 mas, bmaj=11.92 mas, bpa=20.13 degrees ! Estimated noise=3242.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00401991 Jy ! Component: 100 - total flux cleaned = -0.00476369 Jy ! Component: 150 - total flux cleaned = -0.00557968 Jy ! Component: 200 - total flux cleaned = -0.00632135 Jy ! Total flux subtracted in 200 components = -0.00632135 Jy ! Clean residual min=-0.010808 max=0.011658 Jy/beam ! Clean residual mean=0.000443 rms=0.002763 Jy/beam ! Combined flux in latest and established models = 1.07772 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 123 components and 1.07772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.386845Jy sigma=0.000595 ! Fit after self-cal, rms=0.386820Jy sigma=0.000595 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.95586e-06 Jy ! Component: 100 - total flux cleaned = 1.24724e-07 Jy ! Component: 150 - total flux cleaned = 0.000110334 Jy ! Component: 200 - total flux cleaned = 0.00010945 Jy ! Total flux subtracted in 200 components = 0.00010945 Jy ! Clean residual min=-0.010517 max=0.011281 Jy/beam ! Clean residual mean=0.000440 rms=0.002723 Jy/beam ! Combined flux in latest and established models = 1.07783 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 125 components and 1.07783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.386543Jy sigma=0.000594 ! Fit after self-cal, rms=0.386526Jy sigma=0.000594 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.386526Jy sigma=0.000594 ! Fit after self-cal, rms=0.391202Jy sigma=0.000594 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.567 mas, bmaj=10.47 mas, bpa=21.5 degrees ! Estimated noise=4390.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.572946 Jy ! Component: 100 - total flux cleaned = 0.787735 Jy ! Component: 150 - total flux cleaned = 0.889152 Jy ! Component: 200 - total flux cleaned = 0.94397 Jy ! Total flux subtracted in 200 components = 0.94397 Jy ! Clean residual min=-0.023325 max=0.027672 Jy/beam ! Clean residual mean=0.001089 rms=0.007391 Jy/beam ! Combined flux in latest and established models = 0.94397 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.94397 Jy ! Inverting map and beam ! Estimated beam: bmin=4.077 mas, bmaj=11.93 mas, bpa=20.16 degrees ! Estimated noise=3243.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428039 Jy ! Component: 100 - total flux cleaned = 0.0669483 Jy ! Component: 150 - total flux cleaned = 0.0819071 Jy ! Component: 200 - total flux cleaned = 0.0915968 Jy ! Total flux subtracted in 200 components = 0.0915968 Jy ! Clean residual min=-0.010538 max=0.013381 Jy/beam ! Clean residual mean=0.001117 rms=0.003403 Jy/beam ! Combined flux in latest and established models = 1.03557 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 77 components and 1.03557 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.266 mas, bmaj=23.69 mas, bpa=17.42 degrees ! Estimated noise=3540.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00956463 Jy ! Component: 100 - total flux cleaned = 0.0150711 Jy ! Component: 150 - total flux cleaned = 0.0168001 Jy ! Component: 200 - total flux cleaned = 0.0173674 Jy ! Total flux subtracted in 200 components = 0.0173674 Jy ! Clean residual min=-0.008940 max=0.011503 Jy/beam ! Clean residual mean=0.001271 rms=0.003482 Jy/beam ! Combined flux in latest and established models = 1.05293 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412617 Jy ! Component: 100 - total flux cleaned = 0.000805632 Jy ! Component: 150 - total flux cleaned = 0.00118671 Jy ! Component: 200 - total flux cleaned = 0.00155887 Jy ! Total flux subtracted in 200 components = 0.00155887 Jy ! Clean residual min=-0.008621 max=0.011074 Jy/beam ! Clean residual mean=0.001222 rms=0.003359 Jy/beam ! Combined flux in latest and established models = 1.05449 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 1.05449 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.077 mas, bmaj=11.93 mas, bpa=20.16 degrees ! Estimated noise=3243.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00382344 Jy ! Component: 100 - total flux cleaned = -0.00346617 Jy ! Component: 150 - total flux cleaned = -0.0030059 Jy ! Component: 200 - total flux cleaned = -0.00258101 Jy ! Total flux subtracted in 200 components = -0.00258101 Jy ! Clean residual min=-0.008123 max=0.010654 Jy/beam ! Clean residual mean=0.000778 rms=0.002855 Jy/beam ! Combined flux in latest and established models = 1.05191 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 100 components and 1.05191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389091Jy sigma=0.000595 ! Fit after self-cal, rms=0.388687Jy sigma=0.000595 wmodel J1700-2610_S_2017_06_15_pus_map.mod ! Writing 100 model components to file: J1700-2610_S_2017_06_15_pus_map.mod wobs J1700-2610_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J1700-2610_S_2017_06_15_pus_uvs.fits wwins J1700-2610_S_2017_06_15_pus_map.win ! wwins: Wrote 1 windows to J1700-2610_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478791 Jy ! Component: 100 - total flux cleaned = 0.00904559 Jy ! Component: 150 - total flux cleaned = 0.0129438 Jy ! Component: 200 - total flux cleaned = 0.0162994 Jy ! Component: 250 - total flux cleaned = 0.0189117 Jy ! Component: 300 - total flux cleaned = 0.0213825 Jy ! Component: 350 - total flux cleaned = 0.0237236 Jy ! Component: 400 - total flux cleaned = 0.0258312 Jy ! Component: 450 - total flux cleaned = 0.02772 Jy ! Component: 500 - total flux cleaned = 0.0292045 Jy ! Component: 550 - total flux cleaned = 0.0307288 Jy ! Component: 600 - total flux cleaned = 0.0320963 Jy ! Component: 650 - total flux cleaned = 0.0332252 Jy ! Component: 700 - total flux cleaned = 0.034408 Jy ! Component: 750 - total flux cleaned = 0.0355518 Jy ! Component: 800 - total flux cleaned = 0.0364065 Jy ! Component: 850 - total flux cleaned = 0.0373186 Jy ! Component: 900 - total flux cleaned = 0.0382038 Jy ! Component: 950 - total flux cleaned = 0.038989 Jy ! Component: 1000 - total flux cleaned = 0.039757 Jy ! Component: 1050 - total flux cleaned = 0.0406591 Jy ! Component: 1100 - total flux cleaned = 0.0413964 Jy ! Component: 1150 - total flux cleaned = 0.0421204 Jy ! Component: 1200 - total flux cleaned = 0.0429019 Jy ! Component: 1250 - total flux cleaned = 0.0435288 Jy ! Component: 1300 - total flux cleaned = 0.0442141 Jy ! Component: 1350 - total flux cleaned = 0.0448198 Jy ! Component: 1400 - total flux cleaned = 0.0454163 Jy ! Component: 1450 - total flux cleaned = 0.0460032 Jy ! Component: 1500 - total flux cleaned = 0.0465174 Jy ! Component: 1550 - total flux cleaned = 0.0469602 Jy ! Component: 1600 - total flux cleaned = 0.0472722 Jy ! Component: 1650 - total flux cleaned = 0.0475806 Jy ! Component: 1700 - total flux cleaned = 0.0479454 Jy ! Component: 1750 - total flux cleaned = 0.0482458 Jy ! Component: 1800 - total flux cleaned = 0.0485431 Jy ! Component: 1850 - total flux cleaned = 0.0489549 Jy ! Component: 1900 - total flux cleaned = 0.0493623 Jy ! Component: 1950 - total flux cleaned = 0.0497073 Jy ! Component: 2000 - total flux cleaned = 0.0499922 Jy ! Component: 2050 - total flux cleaned = 0.0504445 Jy ! Component: 2100 - total flux cleaned = 0.0507802 Jy ! Component: 2150 - total flux cleaned = 0.0511689 Jy ! Component: 2200 - total flux cleaned = 0.0516098 Jy ! Component: 2250 - total flux cleaned = 0.0519925 Jy ! Component: 2300 - total flux cleaned = 0.0524268 Jy ! Component: 2350 - total flux cleaned = 0.0529121 Jy ! Component: 2400 - total flux cleaned = 0.0533938 Jy ! Component: 2450 - total flux cleaned = 0.0537658 Jy ! Component: 2500 - total flux cleaned = 0.0542942 Jy ! Component: 2550 - total flux cleaned = 0.0548193 Jy ! Component: 2600 - total flux cleaned = 0.055289 Jy ! Component: 2650 - total flux cleaned = 0.0557043 Jy ! Component: 2700 - total flux cleaned = 0.0561689 Jy ! Component: 2750 - total flux cleaned = 0.0565797 Jy ! Component: 2800 - total flux cleaned = 0.0570392 Jy ! Component: 2850 - total flux cleaned = 0.0574963 Jy ! Component: 2900 - total flux cleaned = 0.0579507 Jy ! Component: 2950 - total flux cleaned = 0.0584531 Jy ! Component: 3000 - total flux cleaned = 0.0589027 Jy ! Component: 3050 - total flux cleaned = 0.0593001 Jy ! Component: 3100 - total flux cleaned = 0.0597943 Jy ! Component: 3150 - total flux cleaned = 0.0601876 Jy ! Component: 3200 - total flux cleaned = 0.0605796 Jy ! Component: 3250 - total flux cleaned = 0.0610674 Jy ! Component: 3300 - total flux cleaned = 0.0615528 Jy ! Component: 3350 - total flux cleaned = 0.0619394 Jy ! Component: 3400 - total flux cleaned = 0.0623729 Jy ! Component: 3450 - total flux cleaned = 0.0629482 Jy ! Component: 3500 - total flux cleaned = 0.0634735 Jy ! Component: 3550 - total flux cleaned = 0.0639019 Jy ! Component: 3600 - total flux cleaned = 0.0644233 Jy ! Component: 3650 - total flux cleaned = 0.0648014 Jy ! Component: 3700 - total flux cleaned = 0.065225 Jy ! Component: 3750 - total flux cleaned = 0.0656008 Jy ! Component: 3800 - total flux cleaned = 0.066069 Jy ! Component: 3850 - total flux cleaned = 0.0664889 Jy ! Component: 3900 - total flux cleaned = 0.0668614 Jy ! Component: 3950 - total flux cleaned = 0.0673257 Jy ! Component: 4000 - total flux cleaned = 0.0676963 Jy ! Component: 4050 - total flux cleaned = 0.0681121 Jy ! Total flux subtracted in 4096 components = 0.0685268 Jy ! Clean residual min=-0.002321 max=0.003079 Jy/beam ! Clean residual mean=0.000126 rms=0.000846 Jy/beam ! Combined flux in latest and established models = 1.12044 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 377 components and 1.12044 Jy ![Exited script file: muppet] wmap "J1700-2610_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.077 x 11.93 at 20.16 degrees (North through East) ! Clean map min=-0.0058933 max=0.71019 Jy/beam ! Writing clean map to FITS file: J1700-2610_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.710193 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000830144 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.35067 0.35067 0.70134 1.40268 2.80536 5.61072 11.2214 22.4429 44.8857 89.7715 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.71 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.077 x 11.93 at 20.16 degrees (North through East) ! Clean map min=-0.0058933 max=0.71019 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1700-2610_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:24:02 2019