! Started logfile: J1700-2610_S_2017_06_10_pus_uvs.log on Mon May 6 14:58:15 2019 obs J1700-2610_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J1700-2610_S_2017_06_10_pus_uva.fits ! AN table 1: 43 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.58708 visibilities/baseline/integration-bin. ! Found source: J1700-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 4544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1700-2610_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.574369Jy sigma=0.004247 ! Fit after self-cal, rms=0.502264Jy sigma=0.003754 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.422 mas, bmaj=7.279 mas, bpa=-3.736 degrees ! Estimated noise=2024.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.654678 Jy ! Component: 100 - total flux cleaned = 0.951266 Jy ! Total flux subtracted in 100 components = 0.951266 Jy ! Clean residual min=-0.047487 max=0.146586 Jy/beam ! Clean residual mean=0.000230 rms=0.017350 Jy/beam ! Combined flux in latest and established models = 0.951267 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.951267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.382546Jy sigma=0.002916 ! Fit after self-cal, rms=0.382337Jy sigma=0.002915 ! Inverting map ! Added new window around map position (-2.5, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.171972 Jy ! Component: 100 - total flux cleaned = 0.279092 Jy ! Total flux subtracted in 100 components = 0.279092 Jy ! Clean residual min=-0.029139 max=0.080027 Jy/beam ! Clean residual mean=0.000140 rms=0.010262 Jy/beam ! Combined flux in latest and established models = 1.23036 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 43 components and 1.23036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233107Jy sigma=0.001700 ! Fit after self-cal, rms=0.232561Jy sigma=0.001695 ! Inverting map ! Added new window around map position (3.5, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.080814 Jy ! Component: 100 - total flux cleaned = 0.137428 Jy ! Total flux subtracted in 100 components = 0.137428 Jy ! Clean residual min=-0.024890 max=0.036913 Jy/beam ! Clean residual mean=0.000099 rms=0.007717 Jy/beam ! Combined flux in latest and established models = 1.36779 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 81 components and 1.36779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182422Jy sigma=0.001286 ! Fit after self-cal, rms=0.182366Jy sigma=0.001286 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=8.398 mas, bpa=-4.938 degrees ! Estimated noise=1591.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0729705 Jy ! Component: 100 - total flux cleaned = 0.111783 Jy ! Component: 150 - total flux cleaned = 0.135958 Jy ! Component: 200 - total flux cleaned = 0.151696 Jy ! Total flux subtracted in 200 components = 0.151696 Jy ! Clean residual min=-0.018095 max=0.018815 Jy/beam ! Clean residual mean=0.000098 rms=0.004524 Jy/beam ! Combined flux in latest and established models = 1.51948 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 122 components and 1.51948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153548Jy sigma=0.001018 ! Fit after self-cal, rms=0.153513Jy sigma=0.001018 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.13 KP 1.04 ! LA 1.01 MK 1.01 NL 0.90 OV 0.98 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.17 KP 0.99 ! LA 0.98 MK 1.00 NL 1.06 OV 1.00 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.16 KP 0.99 ! LA 0.98 MK 0.99 NL 1.01 OV 0.91 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.09 KP 1.00* ! LA 1.00* MK 1.21 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.153513Jy sigma=0.001018 ! Fit after self-cal, rms=0.139326Jy sigma=0.000868 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=8.31 mas, bpa=-4.04 degrees ! Estimated noise=1589.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00953132 Jy ! Component: 100 - total flux cleaned = -0.0102491 Jy ! Component: 150 - total flux cleaned = -0.0107958 Jy ! Component: 200 - total flux cleaned = -0.0114513 Jy ! Total flux subtracted in 200 components = -0.0114513 Jy ! Clean residual min=-0.013683 max=0.016426 Jy/beam ! Clean residual mean=-0.000013 rms=0.003595 Jy/beam ! Combined flux in latest and established models = 1.50803 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 130 components and 1.50803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137302Jy sigma=0.000858 ! Fit after self-cal, rms=0.137340Jy sigma=0.000858 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137340Jy sigma=0.000858 ! Fit after self-cal, rms=0.113700Jy sigma=0.000721 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=8.316 mas, bpa=-4.178 degrees ! Estimated noise=1585.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00730549 Jy ! Component: 100 - total flux cleaned = -0.00996827 Jy ! Component: 150 - total flux cleaned = -0.0104963 Jy ! Component: 200 - total flux cleaned = -0.0105889 Jy ! Total flux subtracted in 200 components = -0.0105889 Jy ! Clean residual min=-0.008236 max=0.007391 Jy/beam ! Clean residual mean=-0.000025 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 1.49744 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 149 components and 1.49744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113421Jy sigma=0.000716 ! Fit after self-cal, rms=0.113474Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.03665e-05 Jy ! Component: 100 - total flux cleaned = 0.000112588 Jy ! Component: 150 - total flux cleaned = 0.000180794 Jy ! Component: 200 - total flux cleaned = 0.000181128 Jy ! Total flux subtracted in 200 components = 0.000181128 Jy ! Clean residual min=-0.008116 max=0.007338 Jy/beam ! Clean residual mean=-0.000026 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 1.49762 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 157 components and 1.49762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113477Jy sigma=0.000715 ! Fit after self-cal, rms=0.113473Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113473Jy sigma=0.000715 ! Fit after self-cal, rms=0.107381Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=8.305 mas, bpa=-4.166 degrees ! Estimated noise=1587.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00452278 Jy ! Component: 100 - total flux cleaned = -0.00524299 Jy ! Component: 150 - total flux cleaned = -0.00561988 Jy ! Component: 200 - total flux cleaned = -0.00595893 Jy ! Total flux subtracted in 200 components = -0.00595893 Jy ! Clean residual min=-0.005176 max=0.004898 Jy/beam ! Clean residual mean=-0.000061 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 1.49166 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 170 components and 1.49166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107051Jy sigma=0.000679 ! Fit after self-cal, rms=0.107125Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000316566 Jy ! Component: 100 - total flux cleaned = -0.000591813 Jy ! Component: 150 - total flux cleaned = -0.00075809 Jy ! Component: 200 - total flux cleaned = -0.00091233 Jy ! Total flux subtracted in 200 components = -0.00091233 Jy ! Clean residual min=-0.005210 max=0.004954 Jy/beam ! Clean residual mean=-0.000059 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 1.49075 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 180 components and 1.49075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107019Jy sigma=0.000678 ! Fit after self-cal, rms=0.107025Jy sigma=0.000678 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107025Jy sigma=0.000678 ! Fit after self-cal, rms=0.107324Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.939 mas, bmaj=19.61 mas, bpa=-0.2501 degrees ! Estimated noise=2034.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00300798 Jy ! Component: 100 - total flux cleaned = -0.00328969 Jy ! Component: 150 - total flux cleaned = -0.00347159 Jy ! Component: 200 - total flux cleaned = -0.00358086 Jy ! Total flux subtracted in 200 components = -0.00358086 Jy ! Clean residual min=-0.005412 max=0.004921 Jy/beam ! Clean residual mean=-0.000144 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 1.48717 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 199 components and 1.48717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107193Jy sigma=0.000676 ! Fit after self-cal, rms=0.107197Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164955 Jy ! Component: 100 - total flux cleaned = -0.000258371 Jy ! Component: 150 - total flux cleaned = -0.000389644 Jy ! Component: 200 - total flux cleaned = -0.000470665 Jy ! Total flux subtracted in 200 components = -0.000470665 Jy ! Clean residual min=-0.005355 max=0.005064 Jy/beam ! Clean residual mean=-0.000142 rms=0.001386 Jy/beam ! Combined flux in latest and established models = 1.4867 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 203 components and 1.4867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107144Jy sigma=0.000676 ! Fit after self-cal, rms=0.107142Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=8.304 mas, bpa=-4.135 degrees ! Estimated noise=1585.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.085 x 8.304 at -4.135 degrees (North through East) ! Clean map min=-0.0045221 max=0.90011 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107142Jy sigma=0.000676 ! Fit after self-cal, rms=0.101078Jy sigma=0.000622 ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=8.299 mas, bpa=-4.103 degrees ! Estimated noise=1585.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00335622 Jy ! Component: 100 - total flux cleaned = -0.00410542 Jy ! Component: 150 - total flux cleaned = -0.00434924 Jy ! Component: 200 - total flux cleaned = -0.00457382 Jy ! Total flux subtracted in 200 components = -0.00457382 Jy ! Clean residual min=-0.004456 max=0.004215 Jy/beam ! Clean residual mean=-0.000068 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 1.48213 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 212 components and 1.48213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100909Jy sigma=0.000620 ! Fit after self-cal, rms=0.100915Jy sigma=0.000620 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205347 Jy ! Component: 100 - total flux cleaned = -0.000329959 Jy ! Component: 150 - total flux cleaned = -0.000449414 Jy ! Component: 200 - total flux cleaned = -0.000559523 Jy ! Total flux subtracted in 200 components = -0.000559523 Jy ! Clean residual min=-0.004458 max=0.004198 Jy/beam ! Clean residual mean=-0.000067 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 1.48157 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 219 components and 1.48157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100854Jy sigma=0.000620 ! Fit after self-cal, rms=0.100859Jy sigma=0.000620 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100859Jy sigma=0.000620 ! Fit after self-cal, rms=0.101099Jy sigma=0.000619 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.438 mas, bmaj=7.149 mas, bpa=-3.084 degrees ! Estimated noise=2069.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.667369 Jy ! Component: 100 - total flux cleaned = 0.96762 Jy ! Component: 150 - total flux cleaned = 1.14031 Jy ! Component: 200 - total flux cleaned = 1.246 Jy ! Total flux subtracted in 200 components = 1.246 Jy ! Clean residual min=-0.017505 max=0.055093 Jy/beam ! Clean residual mean=0.000057 rms=0.006608 Jy/beam ! Combined flux in latest and established models = 1.246 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 1.246 Jy ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=8.3 mas, bpa=-4.097 degrees ! Estimated noise=1585.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0984222 Jy ! Component: 100 - total flux cleaned = 0.150426 Jy ! Component: 150 - total flux cleaned = 0.179524 Jy ! Component: 200 - total flux cleaned = 0.196983 Jy ! Total flux subtracted in 200 components = 0.196983 Jy ! Clean residual min=-0.005637 max=0.009251 Jy/beam ! Clean residual mean=0.000021 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 1.44298 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 133 components and 1.44298 Jy ! Inverting map ! Added new window around map position (-5.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112802 Jy ! Component: 100 - total flux cleaned = 0.018866 Jy ! Component: 150 - total flux cleaned = 0.0241661 Jy ! Component: 200 - total flux cleaned = 0.0279259 Jy ! Total flux subtracted in 200 components = 0.0279259 Jy ! Clean residual min=-0.004443 max=0.004090 Jy/beam ! Clean residual mean=-0.000051 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 1.47091 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 187 components and 1.47091 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.954 mas, bmaj=19.62 mas, bpa=-0.2569 degrees ! Estimated noise=2032.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004268 Jy ! Component: 100 - total flux cleaned = 0.00648437 Jy ! Component: 150 - total flux cleaned = 0.0077648 Jy ! Component: 200 - total flux cleaned = 0.00851307 Jy ! Total flux subtracted in 200 components = 0.00851307 Jy ! Clean residual min=-0.004714 max=0.003520 Jy/beam ! Clean residual mean=-0.000153 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 1.47942 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000290338 Jy ! Component: 100 - total flux cleaned = 0.000353561 Jy ! Component: 150 - total flux cleaned = 0.000384483 Jy ! Component: 200 - total flux cleaned = 0.000415275 Jy ! Total flux subtracted in 200 components = 0.000415275 Jy ! Clean residual min=-0.004678 max=0.003473 Jy/beam ! Clean residual mean=-0.000155 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 1.47983 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 211 components and 1.47983 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=8.3 mas, bpa=-4.097 degrees ! Estimated noise=1585.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000861115 Jy ! Component: 100 - total flux cleaned = -0.000858688 Jy ! Component: 150 - total flux cleaned = -0.000759815 Jy ! Component: 200 - total flux cleaned = -0.000671213 Jy ! Total flux subtracted in 200 components = -0.000671213 Jy ! Clean residual min=-0.004178 max=0.003865 Jy/beam ! Clean residual mean=-0.000071 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 1.47916 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 225 components and 1.47916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100793Jy sigma=0.000616 ! Fit after self-cal, rms=0.100758Jy sigma=0.000616 wmodel J1700-2610_S_2017_06_10_pus_map.mod ! Writing 225 model components to file: J1700-2610_S_2017_06_10_pus_map.mod wobs J1700-2610_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J1700-2610_S_2017_06_10_pus_uvs.fits wwins J1700-2610_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J1700-2610_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047515 Jy ! Component: 100 - total flux cleaned = -0.00075614 Jy ! Component: 150 - total flux cleaned = -0.00116017 Jy ! Component: 200 - total flux cleaned = -0.0013563 Jy ! Component: 250 - total flux cleaned = -0.00167137 Jy ! Component: 300 - total flux cleaned = -0.00197631 Jy ! Component: 350 - total flux cleaned = -0.00227336 Jy ! Component: 400 - total flux cleaned = -0.00238875 Jy ! Component: 450 - total flux cleaned = -0.00261512 Jy ! Component: 500 - total flux cleaned = -0.00278149 Jy ! Component: 550 - total flux cleaned = -0.00310585 Jy ! Component: 600 - total flux cleaned = -0.0034234 Jy ! Component: 650 - total flux cleaned = -0.00368281 Jy ! Component: 700 - total flux cleaned = -0.00393749 Jy ! Component: 750 - total flux cleaned = -0.00418809 Jy ! Component: 800 - total flux cleaned = -0.00428654 Jy ! Component: 850 - total flux cleaned = -0.00462919 Jy ! Component: 900 - total flux cleaned = -0.00491819 Jy ! Component: 950 - total flux cleaned = -0.00515615 Jy ! Component: 1000 - total flux cleaned = -0.00539117 Jy ! Component: 1050 - total flux cleaned = -0.00571494 Jy ! Component: 1100 - total flux cleaned = -0.00589844 Jy ! Component: 1150 - total flux cleaned = -0.00612446 Jy ! Component: 1200 - total flux cleaned = -0.00621435 Jy ! Component: 1250 - total flux cleaned = -0.00647909 Jy ! Component: 1300 - total flux cleaned = -0.00665336 Jy ! Component: 1350 - total flux cleaned = -0.00678269 Jy ! Component: 1400 - total flux cleaned = -0.00686821 Jy ! Component: 1450 - total flux cleaned = -0.00695285 Jy ! Component: 1500 - total flux cleaned = -0.00716097 Jy ! Component: 1550 - total flux cleaned = -0.00711984 Jy ! Component: 1600 - total flux cleaned = -0.00732368 Jy ! Component: 1650 - total flux cleaned = -0.0072829 Jy ! Component: 1700 - total flux cleaned = -0.00752255 Jy ! Component: 1750 - total flux cleaned = -0.00744356 Jy ! Component: 1800 - total flux cleaned = -0.00752269 Jy ! Component: 1850 - total flux cleaned = -0.00748447 Jy ! Component: 1900 - total flux cleaned = -0.00767693 Jy ! Component: 1950 - total flux cleaned = -0.00767742 Jy ! Component: 2000 - total flux cleaned = -0.00775304 Jy ! Component: 2050 - total flux cleaned = -0.00797722 Jy ! Component: 2100 - total flux cleaned = -0.00797683 Jy ! Component: 2150 - total flux cleaned = -0.00805022 Jy ! Component: 2200 - total flux cleaned = -0.00812313 Jy ! Component: 2250 - total flux cleaned = -0.00833974 Jy ! Component: 2300 - total flux cleaned = -0.00837526 Jy ! Component: 2350 - total flux cleaned = -0.00855281 Jy ! Component: 2400 - total flux cleaned = -0.00855338 Jy ! Component: 2450 - total flux cleaned = -0.00883249 Jy ! Component: 2500 - total flux cleaned = -0.00890155 Jy ! Component: 2550 - total flux cleaned = -0.00893587 Jy ! Component: 2600 - total flux cleaned = -0.0091058 Jy ! Component: 2650 - total flux cleaned = -0.00924048 Jy ! Component: 2700 - total flux cleaned = -0.00927368 Jy ! Component: 2750 - total flux cleaned = -0.00963882 Jy ! Component: 2800 - total flux cleaned = -0.00963861 Jy ! Component: 2850 - total flux cleaned = -0.00980216 Jy ! Component: 2900 - total flux cleaned = -0.00996403 Jy ! Component: 2950 - total flux cleaned = -0.0100606 Jy ! Component: 3000 - total flux cleaned = -0.0102203 Jy ! Component: 3050 - total flux cleaned = -0.0102203 Jy ! Component: 3100 - total flux cleaned = -0.0104089 Jy ! Component: 3150 - total flux cleaned = -0.0105027 Jy ! Component: 3200 - total flux cleaned = -0.0105959 Jy ! Component: 3250 - total flux cleaned = -0.010719 Jy ! Component: 3300 - total flux cleaned = -0.0107497 Jy ! Component: 3350 - total flux cleaned = -0.0109019 Jy ! Component: 3400 - total flux cleaned = -0.0110225 Jy ! Component: 3450 - total flux cleaned = -0.0110229 Jy ! Component: 3500 - total flux cleaned = -0.0111423 Jy ! Component: 3550 - total flux cleaned = -0.0112601 Jy ! Component: 3600 - total flux cleaned = -0.0112602 Jy ! Component: 3650 - total flux cleaned = -0.0112601 Jy ! Component: 3700 - total flux cleaned = -0.0112891 Jy ! Component: 3750 - total flux cleaned = -0.011433 Jy ! Component: 3800 - total flux cleaned = -0.0113756 Jy ! Component: 3850 - total flux cleaned = -0.0114327 Jy ! Component: 3900 - total flux cleaned = -0.0115458 Jy ! Component: 3950 - total flux cleaned = -0.011658 Jy ! Component: 4000 - total flux cleaned = -0.0115742 Jy ! Component: 4050 - total flux cleaned = -0.0116854 Jy ! Total flux subtracted in 4096 components = -0.0117681 Jy ! Clean residual min=-0.001589 max=0.001573 Jy/beam ! Clean residual mean=-0.000016 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 1.46739 Jy keep ! Adding 261 model components to the UV plane model. ! The established model now contains 486 components and 1.46739 Jy ![Exited script file: muppet] wmap "J1700-2610_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 8.3 at -4.097 degrees (North through East) ! Clean map min=-0.0028281 max=0.90088 Jy/beam ! Writing clean map to FITS file: J1700-2610_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.900883 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000501976 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.167161 0.167161 0.334323 0.668645 1.33729 2.67458 5.34916 10.6983 21.3966 42.7933 85.5866 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.9 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.086 x 8.3 at -4.097 degrees (North through East) ! Clean map min=-0.0028281 max=0.90088 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1700-2610_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:58:19 2019