! Started logfile: J1700-2610_S_2017_02_24_pus_uvs.log on Sat May 4 11:31:45 2019 obs J1700-2610_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J1700-2610_S_2017_02_24_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.816667 visibilities/baseline/integration-bin. ! Found source: J1700-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 2352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1700-2610_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.461360Jy sigma=0.002940 ! Fit after self-cal, rms=0.453115Jy sigma=0.002879 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=6.645 mas, bpa=-3.118 degrees ! Estimated noise=3056.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.623173 Jy ! Component: 100 - total flux cleaned = 0.894152 Jy ! Total flux subtracted in 100 components = 0.894152 Jy ! Clean residual min=-0.046295 max=0.129367 Jy/beam ! Clean residual mean=-0.000036 rms=0.016182 Jy/beam ! Combined flux in latest and established models = 0.894152 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.894152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.313177Jy sigma=0.002076 ! Fit after self-cal, rms=0.312480Jy sigma=0.002072 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148361 Jy ! Component: 100 - total flux cleaned = 0.23432 Jy ! Total flux subtracted in 100 components = 0.23432 Jy ! Clean residual min=-0.027101 max=0.065532 Jy/beam ! Clean residual mean=-0.000014 rms=0.008537 Jy/beam ! Combined flux in latest and established models = 1.12847 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 36 components and 1.12847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194756Jy sigma=0.001218 ! Fit after self-cal, rms=0.194612Jy sigma=0.001217 ! Inverting map ! Added new window around map position (3.5, -1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.062859 Jy ! Component: 100 - total flux cleaned = 0.100133 Jy ! Total flux subtracted in 100 components = 0.100133 Jy ! Clean residual min=-0.021661 max=0.036461 Jy/beam ! Clean residual mean=-0.000009 rms=0.006172 Jy/beam ! Combined flux in latest and established models = 1.22861 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 55 components and 1.2286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165111Jy sigma=0.001018 ! Fit after self-cal, rms=0.164207Jy sigma=0.001011 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.238 mas, bmaj=7.804 mas, bpa=-1.373 degrees ! Estimated noise=2382.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0343814 Jy ! Component: 100 - total flux cleaned = 0.0533893 Jy ! Component: 150 - total flux cleaned = 0.0643589 Jy ! Component: 200 - total flux cleaned = 0.0707523 Jy ! Total flux subtracted in 200 components = 0.0707523 Jy ! Clean residual min=-0.020836 max=0.031025 Jy/beam ! Clean residual mean=0.000003 rms=0.006224 Jy/beam ! Combined flux in latest and established models = 1.29936 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 74 components and 1.29936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155421Jy sigma=0.000969 ! Fit after self-cal, rms=0.155065Jy sigma=0.000966 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 1.20 KP 0.98 ! LA 0.98 MK 1.01 NL 1.05 OV 1.05 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 1.23 KP 0.94 ! LA 0.95 MK 1.00 NL 1.00 OV 1.07 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.11 KP 1.03 ! LA 1.02 MK 1.01 NL 1.22 OV 0.97 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.07 KP 1.00* ! LA 0.77 MK 1.01 NL 1.00* OV 1.02 ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.155065Jy sigma=0.000966 ! Fit after self-cal, rms=0.122437Jy sigma=0.000758 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=7.78 mas, bpa=-0.9956 degrees ! Estimated noise=2401.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00561346 Jy ! Component: 100 - total flux cleaned = -0.00591676 Jy ! Component: 150 - total flux cleaned = -0.0059086 Jy ! Component: 200 - total flux cleaned = -0.00612534 Jy ! Total flux subtracted in 200 components = -0.00612534 Jy ! Clean residual min=-0.012186 max=0.014548 Jy/beam ! Clean residual mean=0.000008 rms=0.003662 Jy/beam ! Combined flux in latest and established models = 1.29323 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 1.29323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121023Jy sigma=0.000749 ! Fit after self-cal, rms=0.120870Jy sigma=0.000748 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120870Jy sigma=0.000748 ! Fit after self-cal, rms=0.110505Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=7.803 mas, bpa=-1.034 degrees ! Estimated noise=2398.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00254841 Jy ! Component: 100 - total flux cleaned = -0.00263627 Jy ! Component: 150 - total flux cleaned = -0.00288043 Jy ! Component: 200 - total flux cleaned = -0.00302391 Jy ! Total flux subtracted in 200 components = -0.00302391 Jy ! Clean residual min=-0.005804 max=0.006391 Jy/beam ! Clean residual mean=-0.000012 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 1.29021 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 1.29021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110299Jy sigma=0.000670 ! Fit after self-cal, rms=0.110306Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000750156 Jy ! Component: 100 - total flux cleaned = -0.000875644 Jy ! Component: 150 - total flux cleaned = -0.000932737 Jy ! Component: 200 - total flux cleaned = -0.000990739 Jy ! Total flux subtracted in 200 components = -0.000990739 Jy ! Clean residual min=-0.005874 max=0.006290 Jy/beam ! Clean residual mean=-0.000011 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 1.28922 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 99 components and 1.28922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110232Jy sigma=0.000670 ! Fit after self-cal, rms=0.110226Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110226Jy sigma=0.000670 ! Fit after self-cal, rms=0.110518Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.809 mas, bpa=-1.013 degrees ! Estimated noise=2399.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129524 Jy ! Component: 100 - total flux cleaned = -0.0014904 Jy ! Component: 150 - total flux cleaned = -0.00160337 Jy ! Component: 200 - total flux cleaned = -0.0017082 Jy ! Total flux subtracted in 200 components = -0.0017082 Jy ! Clean residual min=-0.005973 max=0.006204 Jy/beam ! Clean residual mean=-0.000013 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 1.28751 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 103 components and 1.28751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110441Jy sigma=0.000669 ! Fit after self-cal, rms=0.110438Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000363887 Jy ! Component: 100 - total flux cleaned = -0.000460038 Jy ! Component: 150 - total flux cleaned = -0.000507549 Jy ! Component: 200 - total flux cleaned = -0.00055295 Jy ! Total flux subtracted in 200 components = -0.00055295 Jy ! Clean residual min=-0.006007 max=0.006169 Jy/beam ! Clean residual mean=-0.000013 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 1.28696 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 106 components and 1.28696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110398Jy sigma=0.000669 ! Fit after self-cal, rms=0.110395Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110395Jy sigma=0.000669 ! Fit after self-cal, rms=0.110589Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.368 mas, bmaj=19.15 mas, bpa=7.079 degrees ! Estimated noise=2948.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000704169 Jy ! Component: 100 - total flux cleaned = 0.000666663 Jy ! Component: 150 - total flux cleaned = 0.000637126 Jy ! Component: 200 - total flux cleaned = 0.00063718 Jy ! Total flux subtracted in 200 components = 0.00063718 Jy ! Clean residual min=-0.004572 max=0.006044 Jy/beam ! Clean residual mean=-0.000025 rms=0.001548 Jy/beam ! Combined flux in latest and established models = 1.28759 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 111 components and 1.28759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110599Jy sigma=0.000669 ! Fit after self-cal, rms=0.110590Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.01967e-06 Jy ! Component: 100 - total flux cleaned = -2.99139e-05 Jy ! Component: 150 - total flux cleaned = -5.18276e-05 Jy ! Component: 200 - total flux cleaned = -2.94501e-05 Jy ! Total flux subtracted in 200 components = -2.94501e-05 Jy ! Clean residual min=-0.004596 max=0.006024 Jy/beam ! Clean residual mean=-0.000025 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 1.28756 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 113 components and 1.28756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110604Jy sigma=0.000669 ! Fit after self-cal, rms=0.110594Jy sigma=0.000669 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=7.814 mas, bpa=-1.009 degrees ! Estimated noise=2401.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.255 x 7.814 at -1.009 degrees (North through East) ! Clean map min=-0.0056506 max=0.83349 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110594Jy sigma=0.000669 ! Fit after self-cal, rms=0.104980Jy sigma=0.000627 ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=7.814 mas, bpa=-0.9548 degrees ! Estimated noise=2402.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000621544 Jy ! Component: 100 - total flux cleaned = -0.000723858 Jy ! Component: 150 - total flux cleaned = -0.000817718 Jy ! Component: 200 - total flux cleaned = -0.000862971 Jy ! Total flux subtracted in 200 components = -0.000862971 Jy ! Clean residual min=-0.005957 max=0.006064 Jy/beam ! Clean residual mean=-0.000013 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 1.2867 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 1.2867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104937Jy sigma=0.000627 ! Fit after self-cal, rms=0.104934Jy sigma=0.000627 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200699 Jy ! Component: 100 - total flux cleaned = -0.000243591 Jy ! Component: 150 - total flux cleaned = -0.000284295 Jy ! Component: 200 - total flux cleaned = -0.000324295 Jy ! Total flux subtracted in 200 components = -0.000324295 Jy ! Clean residual min=-0.005983 max=0.006046 Jy/beam ! Clean residual mean=-0.000013 rms=0.001502 Jy/beam ! Combined flux in latest and established models = 1.28638 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 121 components and 1.28638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104906Jy sigma=0.000627 ! Fit after self-cal, rms=0.104905Jy sigma=0.000627 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104905Jy sigma=0.000627 ! Fit after self-cal, rms=0.105028Jy sigma=0.000627 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.661 mas, bpa=-2.728 degrees ! Estimated noise=3105.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.631707 Jy ! Component: 100 - total flux cleaned = 0.902916 Jy ! Component: 150 - total flux cleaned = 1.05046 Jy ! Component: 200 - total flux cleaned = 1.1379 Jy ! Total flux subtracted in 200 components = 1.1379 Jy ! Clean residual min=-0.020633 max=0.044716 Jy/beam ! Clean residual mean=-0.000010 rms=0.005791 Jy/beam ! Combined flux in latest and established models = 1.1379 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.1379 Jy ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=7.816 mas, bpa=-0.9553 degrees ! Estimated noise=2403.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0712679 Jy ! Component: 100 - total flux cleaned = 0.106376 Jy ! Component: 150 - total flux cleaned = 0.124592 Jy ! Component: 200 - total flux cleaned = 0.134373 Jy ! Total flux subtracted in 200 components = 0.134373 Jy ! Clean residual min=-0.006735 max=0.009737 Jy/beam ! Clean residual mean=-0.000015 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 1.27227 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 76 components and 1.27227 Jy ! Inverting map ! Added new window around map position (-3.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00829909 Jy ! Component: 100 - total flux cleaned = 0.0125537 Jy ! Component: 150 - total flux cleaned = 0.0135395 Jy ! Component: 200 - total flux cleaned = 0.0141716 Jy ! Total flux subtracted in 200 components = 0.0141716 Jy ! Clean residual min=-0.005996 max=0.006044 Jy/beam ! Clean residual mean=-0.000014 rms=0.001498 Jy/beam ! Combined flux in latest and established models = 1.28645 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 1.28645 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.372 mas, bmaj=19.16 mas, bpa=7.135 degrees ! Estimated noise=2948.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179965 Jy ! Component: 100 - total flux cleaned = 0.00190398 Jy ! Component: 150 - total flux cleaned = 0.00198829 Jy ! Component: 200 - total flux cleaned = 0.00206005 Jy ! Total flux subtracted in 200 components = 0.00206005 Jy ! Clean residual min=-0.004538 max=0.006122 Jy/beam ! Clean residual mean=-0.000026 rms=0.001530 Jy/beam ! Combined flux in latest and established models = 1.28851 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.11779e-05 Jy ! Component: 100 - total flux cleaned = 8.93377e-05 Jy ! Component: 150 - total flux cleaned = 0.00011454 Jy ! Component: 200 - total flux cleaned = 0.000137345 Jy ! Total flux subtracted in 200 components = 0.000137345 Jy ! Clean residual min=-0.004542 max=0.006109 Jy/beam ! Clean residual mean=-0.000026 rms=0.001527 Jy/beam ! Combined flux in latest and established models = 1.28864 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 112 components and 1.28864 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.257 mas, bmaj=7.816 mas, bpa=-0.9553 degrees ! Estimated noise=2403.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000604262 Jy ! Component: 100 - total flux cleaned = -0.000417424 Jy ! Component: 150 - total flux cleaned = -0.000335647 Jy ! Component: 200 - total flux cleaned = -0.000259479 Jy ! Total flux subtracted in 200 components = -0.000259479 Jy ! Clean residual min=-0.005926 max=0.005721 Jy/beam ! Clean residual mean=-0.000014 rms=0.001463 Jy/beam ! Combined flux in latest and established models = 1.28838 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 1.28838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104735Jy sigma=0.000625 ! Fit after self-cal, rms=0.104713Jy sigma=0.000625 wmodel J1700-2610_S_2017_02_24_pus_map.mod ! Writing 122 model components to file: J1700-2610_S_2017_02_24_pus_map.mod wobs J1700-2610_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J1700-2610_S_2017_02_24_pus_uvs.fits wwins J1700-2610_S_2017_02_24_pus_map.win ! wwins: Wrote 3 windows to J1700-2610_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.55924e-05 Jy ! Component: 100 - total flux cleaned = 0.000187445 Jy ! Component: 150 - total flux cleaned = 0.000377742 Jy ! Component: 200 - total flux cleaned = 0.000195531 Jy ! Component: 250 - total flux cleaned = -6.7828e-05 Jy ! Component: 300 - total flux cleaned = -0.000153308 Jy ! Component: 350 - total flux cleaned = -0.000319934 Jy ! Component: 400 - total flux cleaned = -0.000481599 Jy ! Component: 450 - total flux cleaned = -0.000558479 Jy ! Component: 500 - total flux cleaned = -0.000560165 Jy ! Component: 550 - total flux cleaned = -0.000935994 Jy ! Component: 600 - total flux cleaned = -0.00086158 Jy ! Component: 650 - total flux cleaned = -0.00100681 Jy ! Component: 700 - total flux cleaned = -0.00135926 Jy ! Component: 750 - total flux cleaned = -0.00149651 Jy ! Component: 800 - total flux cleaned = -0.00169996 Jy ! Component: 850 - total flux cleaned = -0.00203387 Jy ! Component: 900 - total flux cleaned = -0.00203237 Jy ! Component: 950 - total flux cleaned = -0.00229242 Jy ! Component: 1000 - total flux cleaned = -0.00248335 Jy ! Component: 1050 - total flux cleaned = -0.0024835 Jy ! Component: 1100 - total flux cleaned = -0.00298211 Jy ! Component: 1150 - total flux cleaned = -0.00328845 Jy ! Component: 1200 - total flux cleaned = -0.00352982 Jy ! Component: 1250 - total flux cleaned = -0.00382823 Jy ! Component: 1300 - total flux cleaned = -0.00388771 Jy ! Component: 1350 - total flux cleaned = -0.00458819 Jy ! Component: 1400 - total flux cleaned = -0.00470272 Jy ! Component: 1450 - total flux cleaned = -0.00498732 Jy ! Component: 1500 - total flux cleaned = -0.00538027 Jy ! Component: 1550 - total flux cleaned = -0.00543564 Jy ! Component: 1600 - total flux cleaned = -0.00565528 Jy ! Component: 1650 - total flux cleaned = -0.00587216 Jy ! Component: 1700 - total flux cleaned = -0.00587226 Jy ! Component: 1750 - total flux cleaned = -0.00603213 Jy ! Component: 1800 - total flux cleaned = -0.00629472 Jy ! Component: 1850 - total flux cleaned = -0.00629457 Jy ! Component: 1900 - total flux cleaned = -0.00639865 Jy ! Component: 1950 - total flux cleaned = -0.00680731 Jy ! Component: 2000 - total flux cleaned = -0.00660522 Jy ! Component: 2050 - total flux cleaned = -0.00670623 Jy ! Component: 2100 - total flux cleaned = -0.00705417 Jy ! Component: 2150 - total flux cleaned = -0.00715292 Jy ! Component: 2200 - total flux cleaned = -0.00720143 Jy ! Component: 2250 - total flux cleaned = -0.00720171 Jy ! Component: 2300 - total flux cleaned = -0.00729799 Jy ! Component: 2350 - total flux cleaned = -0.00744024 Jy ! Component: 2400 - total flux cleaned = -0.00729923 Jy ! Component: 2450 - total flux cleaned = -0.00739281 Jy ! Component: 2500 - total flux cleaned = -0.00734621 Jy ! Component: 2550 - total flux cleaned = -0.00734645 Jy ! Component: 2600 - total flux cleaned = -0.00743723 Jy ! Component: 2650 - total flux cleaned = -0.00748274 Jy ! Component: 2700 - total flux cleaned = -0.00757228 Jy ! Component: 2750 - total flux cleaned = -0.00766075 Jy ! Component: 2800 - total flux cleaned = -0.00761759 Jy ! Component: 2850 - total flux cleaned = -0.00774979 Jy ! Component: 2900 - total flux cleaned = -0.00783689 Jy ! Component: 2950 - total flux cleaned = -0.00805257 Jy ! Component: 3000 - total flux cleaned = -0.00813831 Jy ! Component: 3050 - total flux cleaned = -0.00826588 Jy ! Component: 3100 - total flux cleaned = -0.00822366 Jy ! Component: 3150 - total flux cleaned = -0.0082236 Jy ! Component: 3200 - total flux cleaned = -0.0082239 Jy ! Component: 3250 - total flux cleaned = -0.00843045 Jy ! Component: 3300 - total flux cleaned = -0.00838908 Jy ! Component: 3350 - total flux cleaned = -0.008511 Jy ! Component: 3400 - total flux cleaned = -0.00855118 Jy ! Component: 3450 - total flux cleaned = -0.00851083 Jy ! Component: 3500 - total flux cleaned = -0.00851136 Jy ! Component: 3550 - total flux cleaned = -0.00851168 Jy ! Component: 3600 - total flux cleaned = -0.00851213 Jy ! Component: 3650 - total flux cleaned = -0.00855145 Jy ! Component: 3700 - total flux cleaned = -0.00859033 Jy ! Component: 3750 - total flux cleaned = -0.00862898 Jy ! Component: 3800 - total flux cleaned = -0.00859105 Jy ! Component: 3850 - total flux cleaned = -0.00862896 Jy ! Component: 3900 - total flux cleaned = -0.00866665 Jy ! Component: 3950 - total flux cleaned = -0.00855393 Jy ! Component: 4000 - total flux cleaned = -0.00874011 Jy ! Component: 4050 - total flux cleaned = -0.00855528 Jy ! Total flux subtracted in 4096 components = -0.0089235 Jy ! Clean residual min=-0.002398 max=0.002395 Jy/beam ! Clean residual mean=-0.000002 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 1.27946 Jy keep ! Adding 265 model components to the UV plane model. ! The established model now contains 387 components and 1.27946 Jy ![Exited script file: muppet] wmap "J1700-2610_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 7.816 at -0.9553 degrees (North through East) ! Clean map min=-0.0046459 max=0.84352 Jy/beam ! Writing clean map to FITS file: J1700-2610_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.843516 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000658196 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.23409 0.23409 0.46818 0.93636 1.87272 3.74544 7.49088 14.9818 29.9635 59.9271 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.843 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.257 x 7.816 at -0.9553 degrees (North through East) ! Clean map min=-0.0046459 max=0.84352 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1700-2610_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:31:51 2019