! Started logfile: J1700-2610_S_2017_01_21_pus_uvs.log on Sun May 5 15:59:07 2019 obs J1700-2610_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1700-2610_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.524306 visibilities/baseline/integration-bin. ! Found source: J1700-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 604 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1700-2610_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.480887Jy sigma=0.002928 ! Fit after self-cal, rms=0.471129Jy sigma=0.002869 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=6.026 mas, bpa=-7.679 degrees ! Estimated noise=6195.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.438187 Jy ! Component: 100 - total flux cleaned = 0.625031 Jy ! Total flux subtracted in 100 components = 0.625031 Jy ! Clean residual min=-0.050165 max=0.092320 Jy/beam ! Clean residual mean=-0.000260 rms=0.020068 Jy/beam ! Combined flux in latest and established models = 0.625031 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.625031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267440Jy sigma=0.001613 ! Fit after self-cal, rms=0.267156Jy sigma=0.001612 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=6.8 mas, bpa=-6.964 degrees ! Estimated noise=5189.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.165224 Jy ! Component: 100 - total flux cleaned = 0.256185 Jy ! Component: 150 - total flux cleaned = 0.308767 Jy ! Component: 200 - total flux cleaned = 0.341063 Jy ! Total flux subtracted in 200 components = 0.341063 Jy ! Clean residual min=-0.025953 max=0.036301 Jy/beam ! Clean residual mean=-0.000132 rms=0.009616 Jy/beam ! Combined flux in latest and established models = 0.966093 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 53 components and 0.966094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137450Jy sigma=0.000759 ! Fit after self-cal, rms=0.137174Jy sigma=0.000758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.09 LA 0.98 ! MK 1.08 NL 1.02 OV 1.00* PT 0.97 ! SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.17 LA 1.01 ! MK 1.03 NL 0.97 OV 1.00* PT 0.93 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.12 LA 0.95 ! MK 1.06 NL 0.97 OV 1.00* PT 0.92 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.07 LA 0.80 ! MK 0.95 NL 1.00* OV 1.00* PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.137174Jy sigma=0.000758 ! Fit after self-cal, rms=0.121088Jy sigma=0.000656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.578 mas, bmaj=6.82 mas, bpa=-6.724 degrees ! Estimated noise=5169.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00387323 Jy ! Component: 100 - total flux cleaned = -0.00387649 Jy ! Component: 150 - total flux cleaned = -0.00345958 Jy ! Component: 200 - total flux cleaned = -0.00325777 Jy ! Total flux subtracted in 200 components = -0.00325777 Jy ! Clean residual min=-0.015199 max=0.017017 Jy/beam ! Clean residual mean=-0.000023 rms=0.003966 Jy/beam ! Combined flux in latest and established models = 0.962836 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.962836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120279Jy sigma=0.000652 ! Fit after self-cal, rms=0.120390Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120390Jy sigma=0.000652 ! Fit after self-cal, rms=0.120388Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.583 mas, bmaj=6.83 mas, bpa=-6.684 degrees ! Estimated noise=5168.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00305675 Jy ! Component: 100 - total flux cleaned = -0.0030663 Jy ! Component: 150 - total flux cleaned = -0.00288723 Jy ! Component: 200 - total flux cleaned = -0.00255217 Jy ! Total flux subtracted in 200 components = -0.00255217 Jy ! Clean residual min=-0.014694 max=0.016098 Jy/beam ! Clean residual mean=-0.000022 rms=0.003808 Jy/beam ! Combined flux in latest and established models = 0.960284 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.960284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119781Jy sigma=0.000648 ! Fit after self-cal, rms=0.119780Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172136 Jy ! Component: 100 - total flux cleaned = 0.000496538 Jy ! Component: 150 - total flux cleaned = 0.000804844 Jy ! Component: 200 - total flux cleaned = 0.00109797 Jy ! Total flux subtracted in 200 components = 0.00109797 Jy ! Clean residual min=-0.014258 max=0.015487 Jy/beam ! Clean residual mean=-0.000020 rms=0.003707 Jy/beam ! Combined flux in latest and established models = 0.961382 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 57 components and 0.961382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119400Jy sigma=0.000646 ! Fit after self-cal, rms=0.119400Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119400Jy sigma=0.000646 ! Fit after self-cal, rms=0.119439Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.588 mas, bmaj=6.84 mas, bpa=-6.682 degrees ! Estimated noise=5172.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195537 Jy ! Component: 100 - total flux cleaned = -0.00194585 Jy ! Component: 150 - total flux cleaned = -0.00181098 Jy ! Component: 200 - total flux cleaned = -0.00169083 Jy ! Total flux subtracted in 200 components = -0.00169083 Jy ! Clean residual min=-0.014000 max=0.014979 Jy/beam ! Clean residual mean=-0.000019 rms=0.003622 Jy/beam ! Combined flux in latest and established models = 0.959691 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.959691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119054Jy sigma=0.000644 ! Fit after self-cal, rms=0.119052Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130985 Jy ! Component: 100 - total flux cleaned = 0.00037589 Jy ! Component: 150 - total flux cleaned = 0.000491791 Jy ! Component: 200 - total flux cleaned = 0.000606419 Jy ! Total flux subtracted in 200 components = 0.000606419 Jy ! Clean residual min=-0.013747 max=0.014581 Jy/beam ! Clean residual mean=-0.000018 rms=0.003569 Jy/beam ! Combined flux in latest and established models = 0.960297 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 60 components and 0.960297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118821Jy sigma=0.000643 ! Fit after self-cal, rms=0.118823Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118823Jy sigma=0.000643 ! Fit after self-cal, rms=0.118924Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.581 mas, bmaj=16.08 mas, bpa=4.642 degrees ! Estimated noise=7144.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513233 Jy ! Component: 100 - total flux cleaned = 0.00579937 Jy ! Component: 150 - total flux cleaned = 0.00587911 Jy ! Component: 200 - total flux cleaned = 0.00595331 Jy ! Total flux subtracted in 200 components = 0.00595331 Jy ! Clean residual min=-0.012420 max=0.011952 Jy/beam ! Clean residual mean=-0.000015 rms=0.003876 Jy/beam ! Combined flux in latest and established models = 0.966251 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 65 components and 0.966251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118926Jy sigma=0.000643 ! Fit after self-cal, rms=0.118920Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.63045e-05 Jy ! Component: 100 - total flux cleaned = 0.000132198 Jy ! Component: 150 - total flux cleaned = 0.000197484 Jy ! Component: 200 - total flux cleaned = 0.000258469 Jy ! Total flux subtracted in 200 components = 0.000258469 Jy ! Clean residual min=-0.012310 max=0.011653 Jy/beam ! Clean residual mean=-0.000014 rms=0.003879 Jy/beam ! Combined flux in latest and established models = 0.966509 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 67 components and 0.966509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118913Jy sigma=0.000644 ! Fit after self-cal, rms=0.118906Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.592 mas, bmaj=6.851 mas, bpa=-6.706 degrees ! Estimated noise=5178.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.592 x 6.851 at -6.706 degrees (North through East) ! Clean map min=-0.012282 max=0.63396 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118906Jy sigma=0.000644 ! Fit after self-cal, rms=0.109966Jy sigma=0.000576 ! Inverting map and beam ! Estimated beam: bmin=2.586 mas, bmaj=6.857 mas, bpa=-6.848 degrees ! Estimated noise=5196.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113597 Jy ! Component: 100 - total flux cleaned = -0.00201805 Jy ! Component: 150 - total flux cleaned = -0.00252327 Jy ! Component: 200 - total flux cleaned = -0.00275404 Jy ! Total flux subtracted in 200 components = -0.00275404 Jy ! Clean residual min=-0.013478 max=0.014092 Jy/beam ! Clean residual mean=-0.000018 rms=0.003475 Jy/beam ! Combined flux in latest and established models = 0.963755 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 69 components and 0.963755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109628Jy sigma=0.000574 ! Fit after self-cal, rms=0.109635Jy sigma=0.000574 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.89141e-07 Jy ! Component: 100 - total flux cleaned = 0.000209098 Jy ! Component: 150 - total flux cleaned = 0.000308309 Jy ! Component: 200 - total flux cleaned = 0.000407159 Jy ! Total flux subtracted in 200 components = 0.000407159 Jy ! Clean residual min=-0.013193 max=0.013863 Jy/beam ! Clean residual mean=-0.000018 rms=0.003441 Jy/beam ! Combined flux in latest and established models = 0.964162 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 0.964162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109459Jy sigma=0.000573 ! Fit after self-cal, rms=0.109462Jy sigma=0.000573 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109462Jy sigma=0.000573 ! Fit after self-cal, rms=0.109699Jy sigma=0.000573 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.168 mas, bmaj=6.037 mas, bpa=-7.608 degrees ! Estimated noise=6330.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.445098 Jy ! Component: 100 - total flux cleaned = 0.629682 Jy ! Component: 150 - total flux cleaned = 0.736215 Jy ! Component: 200 - total flux cleaned = 0.802336 Jy ! Total flux subtracted in 200 components = 0.802336 Jy ! Clean residual min=-0.030586 max=0.036913 Jy/beam ! Clean residual mean=-0.000123 rms=0.010074 Jy/beam ! Combined flux in latest and established models = 0.802336 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.802336 Jy ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=6.869 mas, bpa=-6.922 degrees ! Estimated noise=5205.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0678949 Jy ! Component: 100 - total flux cleaned = 0.106361 Jy ! Component: 150 - total flux cleaned = 0.12825 Jy ! Component: 200 - total flux cleaned = 0.140769 Jy ! Total flux subtracted in 200 components = 0.140769 Jy ! Clean residual min=-0.016632 max=0.017616 Jy/beam ! Clean residual mean=-0.000046 rms=0.004481 Jy/beam ! Combined flux in latest and established models = 0.943105 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 0.943105 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.585 mas, bmaj=16.1 mas, bpa=4.507 degrees ! Estimated noise=7169.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176048 Jy ! Component: 100 - total flux cleaned = 0.0233658 Jy ! Component: 150 - total flux cleaned = 0.0237235 Jy ! Component: 200 - total flux cleaned = 0.0238284 Jy ! Total flux subtracted in 200 components = 0.0238284 Jy ! Clean residual min=-0.012716 max=0.012642 Jy/beam ! Clean residual mean=-0.000026 rms=0.003945 Jy/beam ! Combined flux in latest and established models = 0.966934 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000101646 Jy ! Component: 100 - total flux cleaned = 0.000198783 Jy ! Component: 150 - total flux cleaned = 0.000293667 Jy ! Component: 200 - total flux cleaned = 0.000383058 Jy ! Total flux subtracted in 200 components = 0.000383058 Jy ! Clean residual min=-0.012562 max=0.012261 Jy/beam ! Clean residual mean=-0.000024 rms=0.003931 Jy/beam ! Combined flux in latest and established models = 0.967317 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.967317 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.59 mas, bmaj=6.869 mas, bpa=-6.922 degrees ! Estimated noise=5205.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00867224 Jy ! Component: 100 - total flux cleaned = -0.0095628 Jy ! Component: 150 - total flux cleaned = -0.00974487 Jy ! Component: 200 - total flux cleaned = -0.00956208 Jy ! Total flux subtracted in 200 components = -0.00956208 Jy ! Clean residual min=-0.015020 max=0.015185 Jy/beam ! Clean residual mean=-0.000025 rms=0.003745 Jy/beam ! Combined flux in latest and established models = 0.957755 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.957755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110935Jy sigma=0.000580 ! Fit after self-cal, rms=0.110896Jy sigma=0.000580 wmodel J1700-2610_S_2017_01_21_pus_map.mod ! Writing 56 model components to file: J1700-2610_S_2017_01_21_pus_map.mod wobs J1700-2610_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1700-2610_S_2017_01_21_pus_uvs.fits wwins J1700-2610_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J1700-2610_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307232 Jy ! Component: 100 - total flux cleaned = 0.0043081 Jy ! Component: 150 - total flux cleaned = 0.0049724 Jy ! Component: 200 - total flux cleaned = 0.00557098 Jy ! Component: 250 - total flux cleaned = 0.005568 Jy ! Component: 300 - total flux cleaned = 0.00471142 Jy ! Component: 350 - total flux cleaned = 0.0039063 Jy ! Component: 400 - total flux cleaned = 0.00375918 Jy ! Component: 450 - total flux cleaned = 0.00390227 Jy ! Component: 500 - total flux cleaned = 0.00376066 Jy ! Component: 550 - total flux cleaned = 0.00350273 Jy ! Component: 600 - total flux cleaned = 0.00350467 Jy ! Component: 650 - total flux cleaned = 0.0033819 Jy ! Component: 700 - total flux cleaned = 0.00349696 Jy ! Component: 750 - total flux cleaned = 0.0032743 Jy ! Component: 800 - total flux cleaned = 0.00316918 Jy ! Component: 850 - total flux cleaned = 0.00337771 Jy ! Component: 900 - total flux cleaned = 0.00327618 Jy ! Component: 950 - total flux cleaned = 0.00367506 Jy ! Component: 1000 - total flux cleaned = 0.003964 Jy ! Component: 1050 - total flux cleaned = 0.00396489 Jy ! Component: 1100 - total flux cleaned = 0.00405493 Jy ! Component: 1150 - total flux cleaned = 0.00369741 Jy ! Component: 1200 - total flux cleaned = 0.00360779 Jy ! Component: 1250 - total flux cleaned = 0.00343904 Jy ! Component: 1300 - total flux cleaned = 0.0031066 Jy ! Component: 1350 - total flux cleaned = 0.00294348 Jy ! Component: 1400 - total flux cleaned = 0.00270467 Jy ! Component: 1450 - total flux cleaned = 0.00254753 Jy ! Component: 1500 - total flux cleaned = 0.00231956 Jy ! Component: 1550 - total flux cleaned = 0.00231935 Jy ! Component: 1600 - total flux cleaned = 0.00202291 Jy ! Component: 1650 - total flux cleaned = 0.00180448 Jy ! Component: 1700 - total flux cleaned = 0.00144769 Jy ! Component: 1750 - total flux cleaned = 0.00137858 Jy ! Component: 1800 - total flux cleaned = 0.00124052 Jy ! Component: 1850 - total flux cleaned = 0.000966879 Jy ! Component: 1900 - total flux cleaned = 0.000830465 Jy ! Component: 1950 - total flux cleaned = 0.000628778 Jy ! Component: 2000 - total flux cleaned = 0.000495615 Jy ! Component: 2050 - total flux cleaned = 0.00036408 Jy ! Component: 2100 - total flux cleaned = 0.00029904 Jy ! Component: 2150 - total flux cleaned = 0.000169412 Jy ! Component: 2200 - total flux cleaned = -8.65934e-05 Jy ! Component: 2250 - total flux cleaned = -8.66334e-05 Jy ! Component: 2300 - total flux cleaned = -0.000402944 Jy ! Component: 2350 - total flux cleaned = -0.000402773 Jy ! Component: 2400 - total flux cleaned = -0.000652556 Jy ! Component: 2450 - total flux cleaned = -0.00077694 Jy ! Component: 2500 - total flux cleaned = -0.000776692 Jy ! Component: 2550 - total flux cleaned = -0.000838762 Jy ! Component: 2600 - total flux cleaned = -0.000900355 Jy ! Component: 2650 - total flux cleaned = -0.000961569 Jy ! Component: 2700 - total flux cleaned = -0.000839925 Jy ! Component: 2750 - total flux cleaned = -0.000718851 Jy ! Component: 2800 - total flux cleaned = -0.000537078 Jy ! Component: 2850 - total flux cleaned = -0.00035546 Jy ! Component: 2900 - total flux cleaned = -0.000174677 Jy ! Component: 2950 - total flux cleaned = -0.00011438 Jy ! Component: 3000 - total flux cleaned = 6.61484e-05 Jy ! Component: 3050 - total flux cleaned = 0.00012594 Jy ! Component: 3100 - total flux cleaned = 0.000125861 Jy ! Component: 3150 - total flux cleaned = 0.000305504 Jy ! Component: 3200 - total flux cleaned = 0.00042544 Jy ! Component: 3250 - total flux cleaned = 0.000545443 Jy ! Component: 3300 - total flux cleaned = 0.000905487 Jy ! Component: 3350 - total flux cleaned = 0.00114574 Jy ! Component: 3400 - total flux cleaned = 0.00150715 Jy ! Component: 3450 - total flux cleaned = 0.00180975 Jy ! Component: 3500 - total flux cleaned = 0.00205345 Jy ! Component: 3550 - total flux cleaned = 0.00235989 Jy ! Component: 3600 - total flux cleaned = 0.00279358 Jy ! Component: 3650 - total flux cleaned = 0.00304316 Jy ! Component: 3700 - total flux cleaned = 0.00342233 Jy ! Component: 3750 - total flux cleaned = 0.00380627 Jy ! Component: 3800 - total flux cleaned = 0.00419429 Jy ! Component: 3850 - total flux cleaned = 0.00452159 Jy ! Component: 3900 - total flux cleaned = 0.00485275 Jy ! Component: 3950 - total flux cleaned = 0.00538882 Jy ! Component: 4000 - total flux cleaned = 0.00579508 Jy ! Component: 4050 - total flux cleaned = 0.00627578 Jy ! Total flux subtracted in 4096 components = 0.00676281 Jy ! Clean residual min=-0.003977 max=0.003689 Jy/beam ! Clean residual mean=0.000023 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.964517 Jy keep ! Adding 232 model components to the UV plane model. ! The established model now contains 288 components and 0.964518 Jy ![Exited script file: muppet] wmap "J1700-2610_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.59 x 6.869 at -6.922 degrees (North through East) ! Clean map min=-0.010221 max=0.63942 Jy/beam ! Writing clean map to FITS file: J1700-2610_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.639424 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00133434 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.626037 0.626037 1.25207 2.50415 5.00829 10.0166 20.0332 40.0663 80.1327 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.639 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.59 x 6.869 at -6.922 degrees (North through East) ! Clean map min=-0.010221 max=0.63942 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1700-2610_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:59:12 2019