! Started logfile: J1700-2610_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:18:20 2019 obs J1700-2610_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J1700-2610_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.326389 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1700-2610 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1700-2610_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 65 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.479925Jy sigma=0.002728 ! Fit after self-cal, rms=0.464627Jy sigma=0.002659 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=15.93 mas, bpa=19.25 degrees ! Estimated noise=5028.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.525887 Jy ! Component: 100 - total flux cleaned = 0.75789 Jy ! Total flux subtracted in 100 components = 0.75789 Jy ! Clean residual min=-0.061463 max=0.107599 Jy/beam ! Clean residual mean=-0.000117 rms=0.020093 Jy/beam ! Combined flux in latest and established models = 0.75789 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.75789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325790Jy sigma=0.001473 ! Fit after self-cal, rms=0.325751Jy sigma=0.001472 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=17.16 mas, bpa=18.12 degrees ! Estimated noise=4143.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156538 Jy ! Component: 100 - total flux cleaned = 0.224239 Jy ! Component: 150 - total flux cleaned = 0.257799 Jy ! Component: 200 - total flux cleaned = 0.278421 Jy ! Total flux subtracted in 200 components = 0.278421 Jy ! Clean residual min=-0.029897 max=0.027684 Jy/beam ! Clean residual mean=-0.000300 rms=0.009597 Jy/beam ! Combined flux in latest and established models = 1.03631 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 60 components and 1.03631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235636Jy sigma=0.000851 ! Fit after self-cal, rms=0.235621Jy sigma=0.000851 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00* KP 1.01 ! LA 1.00 MK 1.00* NL 0.92 OV 1.00* ! PT 0.99 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.00* KP 0.97 ! LA 0.99 MK 1.00* NL 1.06 OV 1.00* ! PT 0.97 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.00* KP 1.00 ! LA 1.00 MK 1.00* NL 0.99 OV 1.00* ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.00* KP 1.35 ! LA 0.57 MK 1.00* NL 1.00* OV 1.00* ! PT 0.97 SC 0.77 ! ! ! Fit before self-cal, rms=0.235621Jy sigma=0.000851 ! Fit after self-cal, rms=0.136414Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=17.23 mas, bpa=18.05 degrees ! Estimated noise=4095.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120473 Jy ! Component: 100 - total flux cleaned = -0.0014478 Jy ! Component: 150 - total flux cleaned = -0.00225787 Jy ! Component: 200 - total flux cleaned = -0.00263338 Jy ! Total flux subtracted in 200 components = -0.00263338 Jy ! Clean residual min=-0.017140 max=0.016764 Jy/beam ! Clean residual mean=-0.000007 rms=0.005004 Jy/beam ! Combined flux in latest and established models = 1.03368 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 83 components and 1.03368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135393Jy sigma=0.000655 ! Fit after self-cal, rms=0.135040Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135040Jy sigma=0.000654 ! Fit after self-cal, rms=0.126760Jy sigma=0.000626 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.521 mas, bmaj=17.2 mas, bpa=18.05 degrees ! Estimated noise=4083.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253612 Jy ! Component: 100 - total flux cleaned = 0.00237148 Jy ! Component: 150 - total flux cleaned = 0.00180799 Jy ! Component: 200 - total flux cleaned = 0.00143057 Jy ! Total flux subtracted in 200 components = 0.00143057 Jy ! Clean residual min=-0.010667 max=0.010866 Jy/beam ! Clean residual mean=-0.000009 rms=0.003181 Jy/beam ! Combined flux in latest and established models = 1.03511 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 105 components and 1.03511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126326Jy sigma=0.000623 ! Fit after self-cal, rms=0.126357Jy sigma=0.000623 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000561801 Jy ! Component: 100 - total flux cleaned = -0.0010038 Jy ! Component: 150 - total flux cleaned = -0.00140744 Jy ! Component: 200 - total flux cleaned = -0.00169576 Jy ! Total flux subtracted in 200 components = -0.00169576 Jy ! Clean residual min=-0.010660 max=0.010538 Jy/beam ! Clean residual mean=-0.000012 rms=0.003108 Jy/beam ! Combined flux in latest and established models = 1.03341 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 1.03341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126183Jy sigma=0.000622 ! Fit after self-cal, rms=0.126181Jy sigma=0.000622 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126181Jy sigma=0.000622 ! Fit after self-cal, rms=0.120365Jy sigma=0.000611 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.516 mas, bmaj=17.2 mas, bpa=18.05 degrees ! Estimated noise=4070.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000297632 Jy ! Component: 100 - total flux cleaned = 3.80605e-05 Jy ! Component: 150 - total flux cleaned = -0.000195254 Jy ! Component: 200 - total flux cleaned = -0.000411096 Jy ! Total flux subtracted in 200 components = -0.000411096 Jy ! Clean residual min=-0.008855 max=0.007811 Jy/beam ! Clean residual mean=-0.000022 rms=0.002194 Jy/beam ! Combined flux in latest and established models = 1.033 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 138 components and 1.033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120248Jy sigma=0.000611 ! Fit after self-cal, rms=0.120250Jy sigma=0.000611 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00026752 Jy ! Component: 100 - total flux cleaned = -0.000465217 Jy ! Component: 150 - total flux cleaned = -0.000653325 Jy ! Component: 200 - total flux cleaned = -0.000834107 Jy ! Total flux subtracted in 200 components = -0.000834107 Jy ! Clean residual min=-0.008719 max=0.007769 Jy/beam ! Clean residual mean=-0.000024 rms=0.002163 Jy/beam ! Combined flux in latest and established models = 1.03217 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 148 components and 1.03217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120172Jy sigma=0.000610 ! Fit after self-cal, rms=0.120171Jy sigma=0.000610 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120171Jy sigma=0.000610 ! Fit after self-cal, rms=0.120070Jy sigma=0.000610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.795 mas, bmaj=20.45 mas, bpa=4.276 degrees ! Estimated noise=4960.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000677739 Jy ! Component: 100 - total flux cleaned = -0.000844298 Jy ! Component: 150 - total flux cleaned = -0.00106726 Jy ! Component: 200 - total flux cleaned = -0.00120587 Jy ! Total flux subtracted in 200 components = -0.00120587 Jy ! Clean residual min=-0.008738 max=0.006962 Jy/beam ! Clean residual mean=-0.000040 rms=0.002226 Jy/beam ! Combined flux in latest and established models = 1.03096 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 154 components and 1.03096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120014Jy sigma=0.000610 ! Fit after self-cal, rms=0.120012Jy sigma=0.000610 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000360176 Jy ! Component: 100 - total flux cleaned = -0.000537017 Jy ! Component: 150 - total flux cleaned = -0.000705122 Jy ! Component: 200 - total flux cleaned = -0.000913893 Jy ! Total flux subtracted in 200 components = -0.000913893 Jy ! Clean residual min=-0.008565 max=0.006859 Jy/beam ! Clean residual mean=-0.000044 rms=0.002172 Jy/beam ! Combined flux in latest and established models = 1.03005 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 157 components and 1.03005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119992Jy sigma=0.000610 ! Fit after self-cal, rms=0.119994Jy sigma=0.000610 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.514 mas, bmaj=17.21 mas, bpa=18.04 degrees ! Estimated noise=4068.01 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.514 x 17.21 at 18.04 degrees (North through East) ! Clean map min=-0.0078389 max=0.71243 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119994Jy sigma=0.000610 ! Fit after self-cal, rms=0.110303Jy sigma=0.000539 ! Inverting map and beam ! Estimated beam: bmin=3.511 mas, bmaj=17.22 mas, bpa=18.05 degrees ! Estimated noise=4067.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000330488 Jy ! Component: 100 - total flux cleaned = 0.000229463 Jy ! Component: 150 - total flux cleaned = 0.000134045 Jy ! Component: 200 - total flux cleaned = 3.26327e-06 Jy ! Total flux subtracted in 200 components = 3.26327e-06 Jy ! Clean residual min=-0.007873 max=0.007459 Jy/beam ! Clean residual mean=-0.000018 rms=0.002029 Jy/beam ! Combined flux in latest and established models = 1.03005 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 167 components and 1.03005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110239Jy sigma=0.000539 ! Fit after self-cal, rms=0.110241Jy sigma=0.000539 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.17071e-05 Jy ! Component: 100 - total flux cleaned = -0.000201482 Jy ! Component: 150 - total flux cleaned = -0.000314209 Jy ! Component: 200 - total flux cleaned = -0.0004216 Jy ! Total flux subtracted in 200 components = -0.0004216 Jy ! Clean residual min=-0.007775 max=0.007528 Jy/beam ! Clean residual mean=-0.000019 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 1.02963 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 170 components and 1.02963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110200Jy sigma=0.000539 ! Fit after self-cal, rms=0.110201Jy sigma=0.000539 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110201Jy sigma=0.000539 ! Fit after self-cal, rms=0.110276Jy sigma=0.000539 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.851 mas, bmaj=15.99 mas, bpa=19.16 degrees ! Estimated noise=4890.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.512431 Jy ! Component: 100 - total flux cleaned = 0.74112 Jy ! Component: 150 - total flux cleaned = 0.861001 Jy ! Component: 200 - total flux cleaned = 0.928475 Jy ! Total flux subtracted in 200 components = 0.928475 Jy ! Clean residual min=-0.023023 max=0.033630 Jy/beam ! Clean residual mean=-0.000013 rms=0.007122 Jy/beam ! Combined flux in latest and established models = 0.928475 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.928475 Jy ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=17.22 mas, bpa=18.05 degrees ! Estimated noise=4068.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0534362 Jy ! Component: 100 - total flux cleaned = 0.0788244 Jy ! Component: 150 - total flux cleaned = 0.09232 Jy ! Component: 200 - total flux cleaned = 0.099948 Jy ! Total flux subtracted in 200 components = 0.099948 Jy ! Clean residual min=-0.010293 max=0.008580 Jy/beam ! Clean residual mean=-0.000016 rms=0.002396 Jy/beam ! Combined flux in latest and established models = 1.02842 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 70 components and 1.02842 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.793 mas, bmaj=20.46 mas, bpa=4.303 degrees ! Estimated noise=4964.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027972 Jy ! Component: 100 - total flux cleaned = 0.00327722 Jy ! Component: 150 - total flux cleaned = 0.00329915 Jy ! Component: 200 - total flux cleaned = 0.00296192 Jy ! Total flux subtracted in 200 components = 0.00296192 Jy ! Clean residual min=-0.009463 max=0.006890 Jy/beam ! Clean residual mean=-0.000025 rms=0.002259 Jy/beam ! Combined flux in latest and established models = 1.03139 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208296 Jy ! Component: 100 - total flux cleaned = -0.00049083 Jy ! Component: 150 - total flux cleaned = -0.00074964 Jy ! Component: 200 - total flux cleaned = -0.000983948 Jy ! Total flux subtracted in 200 components = -0.000983948 Jy ! Clean residual min=-0.008759 max=0.006472 Jy/beam ! Clean residual mean=-0.000029 rms=0.002138 Jy/beam ! Combined flux in latest and established models = 1.0304 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 108 components and 1.0304 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.512 mas, bmaj=17.22 mas, bpa=18.05 degrees ! Estimated noise=4068.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192431 Jy ! Component: 100 - total flux cleaned = -0.00217927 Jy ! Component: 150 - total flux cleaned = -0.00227676 Jy ! Component: 200 - total flux cleaned = -0.00227465 Jy ! Total flux subtracted in 200 components = -0.00227465 Jy ! Clean residual min=-0.008432 max=0.007477 Jy/beam ! Clean residual mean=-0.000020 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 1.02813 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 125 components and 1.02813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110551Jy sigma=0.000541 ! Fit after self-cal, rms=0.110575Jy sigma=0.000541 wmodel J1700-2610_S_2017_01_16_pus_map.mod ! Writing 125 model components to file: J1700-2610_S_2017_01_16_pus_map.mod wobs J1700-2610_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J1700-2610_S_2017_01_16_pus_uvs.fits wwins J1700-2610_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J1700-2610_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00273698 Jy ! Component: 100 - total flux cleaned = -0.00326236 Jy ! Component: 150 - total flux cleaned = -0.00338371 Jy ! Component: 200 - total flux cleaned = -0.00360667 Jy ! Component: 250 - total flux cleaned = -0.00402139 Jy ! Component: 300 - total flux cleaned = -0.00422542 Jy ! Component: 350 - total flux cleaned = -0.00422773 Jy ! Component: 400 - total flux cleaned = -0.00413568 Jy ! Component: 450 - total flux cleaned = -0.0040465 Jy ! Component: 500 - total flux cleaned = -0.00395949 Jy ! Component: 550 - total flux cleaned = -0.00362339 Jy ! Component: 600 - total flux cleaned = -0.00362377 Jy ! Component: 650 - total flux cleaned = -0.00362335 Jy ! Component: 700 - total flux cleaned = -0.00370123 Jy ! Component: 750 - total flux cleaned = -0.00377782 Jy ! Component: 800 - total flux cleaned = -0.00378051 Jy ! Component: 850 - total flux cleaned = -0.00392768 Jy ! Component: 900 - total flux cleaned = -0.00407054 Jy ! Component: 950 - total flux cleaned = -0.00427911 Jy ! Component: 1000 - total flux cleaned = -0.00434664 Jy ! Component: 1050 - total flux cleaned = -0.0043475 Jy ! Component: 1100 - total flux cleaned = -0.00421575 Jy ! Component: 1150 - total flux cleaned = -0.00402275 Jy ! Component: 1200 - total flux cleaned = -0.00389514 Jy ! Component: 1250 - total flux cleaned = -0.00358076 Jy ! Component: 1300 - total flux cleaned = -0.00314962 Jy ! Component: 1350 - total flux cleaned = -0.00284506 Jy ! Component: 1400 - total flux cleaned = -0.00242562 Jy ! Component: 1450 - total flux cleaned = -0.00207046 Jy ! Component: 1500 - total flux cleaned = -0.00154594 Jy ! Component: 1550 - total flux cleaned = -0.00120169 Jy ! Component: 1600 - total flux cleaned = -0.000690786 Jy ! Component: 1650 - total flux cleaned = -0.000299284 Jy ! Component: 1700 - total flux cleaned = 0.00014151 Jy ! Component: 1750 - total flux cleaned = 0.000522184 Jy ! Component: 1800 - total flux cleaned = 0.00079051 Jy ! Component: 1850 - total flux cleaned = 0.00110938 Jy ! Component: 1900 - total flux cleaned = 0.00147696 Jy ! Component: 1950 - total flux cleaned = 0.00178757 Jy ! Component: 2000 - total flux cleaned = 0.00204297 Jy ! Component: 2050 - total flux cleaned = 0.00209368 Jy ! Component: 2100 - total flux cleaned = 0.00239462 Jy ! Component: 2150 - total flux cleaned = 0.00269185 Jy ! Component: 2200 - total flux cleaned = 0.00303467 Jy ! Component: 2250 - total flux cleaned = 0.00337347 Jy ! Component: 2300 - total flux cleaned = 0.00361328 Jy ! Component: 2350 - total flux cleaned = 0.00399225 Jy ! Component: 2400 - total flux cleaned = 0.00417978 Jy ! Component: 2450 - total flux cleaned = 0.00413317 Jy ! Component: 2500 - total flux cleaned = 0.00431773 Jy ! Component: 2550 - total flux cleaned = 0.00450028 Jy ! Component: 2600 - total flux cleaned = 0.00450041 Jy ! Component: 2650 - total flux cleaned = 0.00450019 Jy ! Component: 2700 - total flux cleaned = 0.00450014 Jy ! Component: 2750 - total flux cleaned = 0.00458845 Jy ! Component: 2800 - total flux cleaned = 0.00458831 Jy ! Component: 2850 - total flux cleaned = 0.00454491 Jy ! Component: 2900 - total flux cleaned = 0.0046317 Jy ! Component: 2950 - total flux cleaned = 0.00458849 Jy ! Component: 3000 - total flux cleaned = 0.0046314 Jy ! Component: 3050 - total flux cleaned = 0.00454625 Jy ! Component: 3100 - total flux cleaned = 0.00467285 Jy ! Component: 3150 - total flux cleaned = 0.00471431 Jy ! Component: 3200 - total flux cleaned = 0.00467246 Jy ! Component: 3250 - total flux cleaned = 0.00475524 Jy ! Component: 3300 - total flux cleaned = 0.00483762 Jy ! Component: 3350 - total flux cleaned = 0.00487844 Jy ! Component: 3400 - total flux cleaned = 0.00491939 Jy ! Component: 3450 - total flux cleaned = 0.00504196 Jy ! Component: 3500 - total flux cleaned = 0.00512351 Jy ! Component: 3550 - total flux cleaned = 0.00516435 Jy ! Component: 3600 - total flux cleaned = 0.00524522 Jy ! Component: 3650 - total flux cleaned = 0.00524529 Jy ! Component: 3700 - total flux cleaned = 0.00524537 Jy ! Component: 3750 - total flux cleaned = 0.00528605 Jy ! Component: 3800 - total flux cleaned = 0.00532645 Jy ! Component: 3850 - total flux cleaned = 0.00524585 Jy ! Component: 3900 - total flux cleaned = 0.00516517 Jy ! Component: 3950 - total flux cleaned = 0.00512449 Jy ! Component: 4000 - total flux cleaned = 0.00504361 Jy ! Component: 4050 - total flux cleaned = 0.00500315 Jy ! Total flux subtracted in 4096 components = 0.00496251 Jy ! Clean residual min=-0.002326 max=0.002851 Jy/beam ! Clean residual mean=0.000012 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 1.03309 Jy keep ! Adding 239 model components to the UV plane model. ! The established model now contains 364 components and 1.03309 Jy ![Exited script file: muppet] wmap "J1700-2610_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.512 x 17.22 at 18.05 degrees (North through East) ! Clean map min=-0.0074285 max=0.70447 Jy/beam ! Writing clean map to FITS file: J1700-2610_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.704473 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000714848 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.304418 0.304418 0.608837 1.21767 2.43535 4.87069 9.74139 19.4828 38.9655 77.9311 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.704 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.512 x 17.22 at 18.05 degrees (North through East) ! Clean map min=-0.0074285 max=0.70447 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1700-2610_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:18:25 2019