! Started logfile: J1659+0213_X_2017_05_31_pus_uvs.log on Tue Feb  5 10:52:21 2019
obs J1659+0213_X_2017_05_31_pus_uva.fits
! Reading UV FITS file: J1659+0213_X_2017_05_31_pus_uva.fits
! AN table 1: 84 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.961111 visibilities/baseline/integration-bin.
! Found source: J1659+0213
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1698 lines of history.
! 
! Reading 43596 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J1659+0213_X_2017_05_31_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 19 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.886312Jy  sigma=0.007057
! Fit after  self-cal, rms=0.875822Jy  sigma=0.006987
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7422 mas, bmaj=1.768 mas, bpa=-2.535 degrees
! Estimated noise=691.537 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0984552 Jy
! Component: 100  -  total flux cleaned = 0.125558 Jy
! Total flux subtracted in 100 components = 0.125558 Jy
! Clean residual min=-0.004985 max=0.014439 Jy/beam
! Clean residual mean=-0.000044 rms=0.001647 Jy/beam
! Combined flux in latest and established models = 0.125558 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.125558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.097865Jy  sigma=0.000706
! Fit after  self-cal, rms=0.097828Jy  sigma=0.000706
! Inverting map 
! Added new window around map position (0.4, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153341 Jy
! Component: 100  -  total flux cleaned = 0.0246274 Jy
! Total flux subtracted in 100 components = 0.0246274 Jy
! Clean residual min=-0.003832 max=0.006104 Jy/beam
! Clean residual mean=-0.000021 rms=0.001095 Jy/beam
! Combined flux in latest and established models = 0.150185 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 23 components and 0.150185 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094939Jy  sigma=0.000674
! Fit after  self-cal, rms=0.094854Jy  sigma=0.000673
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00687426 Jy
! Component: 100  -  total flux cleaned = 0.0112791 Jy
! Total flux subtracted in 100 components = 0.0112791 Jy
! Clean residual min=-0.003666 max=0.004458 Jy/beam
! Clean residual mean=-0.000010 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 0.161464 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 30 components and 0.161464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.094243Jy  sigma=0.000665
! Fit after  self-cal, rms=0.094208Jy  sigma=0.000665
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8992 mas, bmaj=2.018 mas, bpa=-1.325 degrees
! Estimated noise=430.905 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00523207 Jy
! Component: 100  -  total flux cleaned = 0.00831792 Jy
! Component: 150  -  total flux cleaned = 0.0104064 Jy
! Component: 200  -  total flux cleaned = 0.0118472 Jy
! Total flux subtracted in 200 components = 0.0118472 Jy
! Clean residual min=-0.003447 max=0.002820 Jy/beam
! Clean residual mean=0.000003 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.173311 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 49 components and 0.173311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093972Jy  sigma=0.000662
! Fit after  self-cal, rms=0.093963Jy  sigma=0.000662
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.09     KP        1.03     
!   LA        0.96     MK        1.00     NL        0.95     OV        1.05     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.13     KP        0.96     
!   LA        0.95     MK        0.98     NL        0.94     OV        1.05     
!   PT        1.04     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.01     HN        1.11     KP        0.92     
!   LA        0.97     MK        0.99     NL        0.95     OV        1.05     
!   PT        1.04     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.11     KP        1.02     
!   LA        0.97     MK        0.98     NL        0.94     OV        1.07     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.96     HN        1.00     KP        1.00     
!   LA        0.97     MK        0.99     NL        0.86     OV        1.08     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.06     KP        1.02     
!   LA        0.96     MK        1.01     NL        0.86     OV        1.00     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.16     KP        1.01     
!   LA        1.01     MK        1.02     NL        0.86     OV        0.98     
!   PT        1.05     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.18     KP        0.97     
!   LA        0.98     MK        0.97     NL        0.88     OV        0.98     
!   PT        1.04     SC        1.05     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.12     KP        0.99     
!   LA        1.00     MK        0.99     NL        0.86     OV        0.97     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.10     KP        1.02     
!   LA        1.00     MK        0.99     NL        0.87     OV        1.01     
!   PT        1.02     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.09     KP        0.92     
!   LA        1.00     MK        1.00     NL        0.88     OV        0.99     
!   PT        1.03     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.18     KP        0.94     
!   LA        1.01     MK        1.05     NL        0.87     OV        1.07     
!   PT        1.03     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.093963Jy  sigma=0.000662
! Fit after  self-cal, rms=0.095709Jy  sigma=0.000656
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9044 mas, bmaj=2.021 mas, bpa=-1.52 degrees
! Estimated noise=427.892 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000547306 Jy
! Component: 100  -  total flux cleaned = 0.000658882 Jy
! Component: 150  -  total flux cleaned = 0.000681291 Jy
! Component: 200  -  total flux cleaned = 0.000722952 Jy
! Total flux subtracted in 200 components = 0.000722952 Jy
! Clean residual min=-0.002098 max=0.001923 Jy/beam
! Clean residual mean=0.000006 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.174034 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 61 components and 0.174034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095677Jy  sigma=0.000656
! Fit after  self-cal, rms=0.095745Jy  sigma=0.000655
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.095745Jy  sigma=0.000655
! Fit after  self-cal, rms=0.101636Jy  sigma=0.000652
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9024 mas, bmaj=2.021 mas, bpa=-1.602 degrees
! Estimated noise=428.402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.19958e-05 Jy
! Component: 100  -  total flux cleaned = 4.87231e-05 Jy
! Component: 150  -  total flux cleaned = 7.16694e-05 Jy
! Component: 200  -  total flux cleaned = 9.26052e-05 Jy
! Total flux subtracted in 200 components = 9.26052e-05 Jy
! Clean residual min=-0.001542 max=0.001513 Jy/beam
! Clean residual mean=0.000004 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.174127 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 65 components and 0.174127 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101622Jy  sigma=0.000652
! Fit after  self-cal, rms=0.101696Jy  sigma=0.000652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.13692e-05 Jy
! Component: 100  -  total flux cleaned = 5.97785e-05 Jy
! Component: 150  -  total flux cleaned = 9.73594e-05 Jy
! Component: 200  -  total flux cleaned = 9.80872e-05 Jy
! Total flux subtracted in 200 components = 9.80872e-05 Jy
! Clean residual min=-0.001457 max=0.001522 Jy/beam
! Clean residual mean=0.000004 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.174225 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 71 components and 0.174225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101689Jy  sigma=0.000652
! Fit after  self-cal, rms=0.101684Jy  sigma=0.000652
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.101684Jy  sigma=0.000652
! Fit after  self-cal, rms=0.102628Jy  sigma=0.000652
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9017 mas, bmaj=2.022 mas, bpa=-1.688 degrees
! Estimated noise=428.343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000246108 Jy
! Component: 100  -  total flux cleaned = -0.000102785 Jy
! Component: 150  -  total flux cleaned = -5.70112e-05 Jy
! Component: 200  -  total flux cleaned = -5.65253e-05 Jy
! Total flux subtracted in 200 components = -5.65253e-05 Jy
! Clean residual min=-0.001320 max=0.001538 Jy/beam
! Clean residual mean=0.000004 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.174168 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.174168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102621Jy  sigma=0.000652
! Fit after  self-cal, rms=0.102628Jy  sigma=0.000652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.2, -6.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014423 Jy
! Component: 100  -  total flux cleaned = 0.002155 Jy
! Component: 150  -  total flux cleaned = 0.00235603 Jy
! Component: 200  -  total flux cleaned = 0.00254474 Jy
! Total flux subtracted in 200 components = 0.00254474 Jy
! Clean residual min=-0.001239 max=0.001162 Jy/beam
! Clean residual mean=0.000002 rms=0.000304 Jy/beam
! Combined flux in latest and established models = 0.176713 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 88 components and 0.176713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102606Jy  sigma=0.000652
! Fit after  self-cal, rms=0.102604Jy  sigma=0.000652
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102604Jy  sigma=0.000652
! Fit after  self-cal, rms=0.102594Jy  sigma=0.000652
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.21 mas, bmaj=3.328 mas, bpa=0.9173 degrees
! Estimated noise=528.621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000174618 Jy
! Component: 100  -  total flux cleaned = 2.96721e-05 Jy
! Component: 150  -  total flux cleaned = 7.795e-05 Jy
! Component: 200  -  total flux cleaned = 0.000119212 Jy
! Total flux subtracted in 200 components = 0.000119212 Jy
! Clean residual min=-0.001250 max=0.001199 Jy/beam
! Clean residual mean=0.000003 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.176832 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.176832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102590Jy  sigma=0.000652
! Fit after  self-cal, rms=0.102589Jy  sigma=0.000652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.46238e-05 Jy
! Component: 100  -  total flux cleaned = -1.65901e-05 Jy
! Component: 150  -  total flux cleaned = 2.25535e-05 Jy
! Component: 200  -  total flux cleaned = 4.50216e-05 Jy
! Total flux subtracted in 200 components = 4.50216e-05 Jy
! Clean residual min=-0.001202 max=0.001184 Jy/beam
! Clean residual mean=0.000003 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.176877 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 103 components and 0.176877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102586Jy  sigma=0.000652
! Fit after  self-cal, rms=0.102583Jy  sigma=0.000651
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9018 mas, bmaj=2.022 mas, bpa=-1.725 degrees
! Estimated noise=427.58 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9018 x 2.022 at -1.725 degrees (North through East)
! Clean map  min=-0.0010646  max=0.12216 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7441 mas, bmaj=1.767 mas, bpa=-2.763 degrees
! Estimated noise=690.499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0980148 Jy
! Component: 100  -  total flux cleaned = 0.127332 Jy
! Component: 150  -  total flux cleaned = 0.141579 Jy
! Component: 200  -  total flux cleaned = 0.150401 Jy
! Total flux subtracted in 200 components = 0.150401 Jy
! Clean residual min=-0.002515 max=0.004930 Jy/beam
! Clean residual mean=-0.000017 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.150401 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 30 model components to the UV plane model.
! The established model now contains 30 components and 0.150401 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9018 mas, bmaj=2.022 mas, bpa=-1.725 degrees
! Estimated noise=427.58 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00827389 Jy
! Component: 100  -  total flux cleaned = 0.0133162 Jy
! Component: 150  -  total flux cleaned = 0.0164957 Jy
! Component: 200  -  total flux cleaned = 0.0186753 Jy
! Total flux subtracted in 200 components = 0.0186753 Jy
! Clean residual min=-0.001378 max=0.001312 Jy/beam
! Clean residual mean=-0.000001 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.169076 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 49 components and 0.169076 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.21 mas, bmaj=3.328 mas, bpa=0.9173 degrees
! Estimated noise=528.621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00248854 Jy
! Component: 100  -  total flux cleaned = 0.00402263 Jy
! Component: 150  -  total flux cleaned = 0.00503241 Jy
! Component: 200  -  total flux cleaned = 0.00573988 Jy
! Total flux subtracted in 200 components = 0.00573988 Jy
! Clean residual min=-0.001236 max=0.001133 Jy/beam
! Clean residual mean=0.000002 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.174816 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264333 Jy
! Component: 100  -  total flux cleaned = 0.000505531 Jy
! Component: 150  -  total flux cleaned = 0.000695296 Jy
! Component: 200  -  total flux cleaned = 0.000858153 Jy
! Total flux subtracted in 200 components = 0.000858153 Jy
! Clean residual min=-0.001155 max=0.001134 Jy/beam
! Clean residual mean=0.000003 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.175674 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 82 components and 0.175674 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9018 mas, bmaj=2.022 mas, bpa=-1.725 degrees
! Estimated noise=427.58 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000178346 Jy
! Component: 100  -  total flux cleaned = 0.000313802 Jy
! Component: 150  -  total flux cleaned = 0.000430774 Jy
! Component: 200  -  total flux cleaned = 0.000500661 Jy
! Total flux subtracted in 200 components = 0.000500661 Jy
! Clean residual min=-0.001161 max=0.001198 Jy/beam
! Clean residual mean=0.000002 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.176175 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.176175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102589Jy  sigma=0.000652
! Fit after  self-cal, rms=0.102578Jy  sigma=0.000651
wmodel J1659+0213_X_2017_05_31_pus_map.mod
! Writing 98 model components to file: J1659+0213_X_2017_05_31_pus_map.mod
wobs J1659+0213_X_2017_05_31_pus_uvs.fits
! Writing UV FITS file: J1659+0213_X_2017_05_31_pus_uvs.fits
wwins J1659+0213_X_2017_05_31_pus_map.win
! wwins: Wrote 3 windows to J1659+0213_X_2017_05_31_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000239647 Jy
! Component: 100  -  total flux cleaned = 0.000319115 Jy
! Component: 150  -  total flux cleaned = 0.00033834 Jy
! Component: 200  -  total flux cleaned = 0.00044459 Jy
! Component: 250  -  total flux cleaned = 0.000579415 Jy
! Component: 300  -  total flux cleaned = 0.000726626 Jy
! Component: 350  -  total flux cleaned = 0.000837812 Jy
! Component: 400  -  total flux cleaned = 0.000915054 Jy
! Component: 450  -  total flux cleaned = 0.00100567 Jy
! Component: 500  -  total flux cleaned = 0.00112336 Jy
! Component: 550  -  total flux cleaned = 0.00123875 Jy
! Component: 600  -  total flux cleaned = 0.00130953 Jy
! Component: 650  -  total flux cleaned = 0.00140728 Jy
! Component: 700  -  total flux cleaned = 0.00151653 Jy
! Component: 750  -  total flux cleaned = 0.0015701 Jy
! Component: 800  -  total flux cleaned = 0.00160995 Jy
! Component: 850  -  total flux cleaned = 0.00171432 Jy
! Component: 900  -  total flux cleaned = 0.00179137 Jy
! Component: 950  -  total flux cleaned = 0.00184192 Jy
! Component: 1000  -  total flux cleaned = 0.00190418 Jy
! Component: 1050  -  total flux cleaned = 0.00194113 Jy
! Component: 1100  -  total flux cleaned = 0.00200182 Jy
! Component: 1150  -  total flux cleaned = 0.00204979 Jy
! Component: 1200  -  total flux cleaned = 0.00209719 Jy
! Component: 1250  -  total flux cleaned = 0.00213241 Jy
! Component: 1300  -  total flux cleaned = 0.00216725 Jy
! Component: 1350  -  total flux cleaned = 0.00223576 Jy
! Component: 1400  -  total flux cleaned = 0.00230346 Jy
! Component: 1450  -  total flux cleaned = 0.00232569 Jy
! Component: 1500  -  total flux cleaned = 0.00239192 Jy
! Component: 1550  -  total flux cleaned = 0.0024137 Jy
! Component: 1600  -  total flux cleaned = 0.00244606 Jy
! Component: 1650  -  total flux cleaned = 0.00244586 Jy
! Component: 1700  -  total flux cleaned = 0.00251997 Jy
! Component: 1750  -  total flux cleaned = 0.00252002 Jy
! Component: 1800  -  total flux cleaned = 0.00254086 Jy
! Component: 1850  -  total flux cleaned = 0.00257181 Jy
! Component: 1900  -  total flux cleaned = 0.00265332 Jy
! Component: 1950  -  total flux cleaned = 0.00265335 Jy
! Component: 2000  -  total flux cleaned = 0.00267333 Jy
! Total flux subtracted in 2048 components = 0.00267333 Jy
! Clean residual min=-0.000528 max=0.000494 Jy/beam
! Clean residual mean=0.000000 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.178848 Jy
keep
! Adding 136 model components to the UV plane model.
! The established model now contains 234 components and 0.178848 Jy
![Exited script file: muppet]
wmap "J1659+0213_X_2017_05_31_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9018 x 2.022 at -1.725 degrees (North through East)
! Clean map  min=-0.0010998  max=0.12288 Jy/beam
! Writing clean map to FITS file: J1659+0213_X_2017_05_31_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.122883 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0001883 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.459708 0.459708 0.919416 1.83883 3.67766 7.35533 14.7107 29.4213 58.8426
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0005 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.122 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9018 x 2.022 at -1.725 degrees (North through East)
! Clean map  min=-0.0010998  max=0.12288 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J1659+0213_X_2017_05_31_pus_uvs.log closed on Tue Feb  5 10:52:24 2019