! Started logfile: J1656-3302_S_2017_10_21_pus_uvs.log on Sat May 11 21:02:32 2019 obs J1656-3302_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1656-3302_S_2017_10_21_pus_uva.fits ! AN table 1: 196 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.577381 visibilities/baseline/integration-bin. ! Found source: J1656-3302 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 16296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1656-3302_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 498 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 415 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 400 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1020 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.834131Jy sigma=0.005549 ! Fit after self-cal, rms=0.747543Jy sigma=0.004958 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.001 mas, bmaj=35.79 mas, bpa=-11.85 degrees ! Estimated noise=2084.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189825 Jy ! Component: 100 - total flux cleaned = 0.289116 Jy ! Total flux subtracted in 100 components = 0.289116 Jy ! Clean residual min=-0.020496 max=0.049508 Jy/beam ! Clean residual mean=-0.000199 rms=0.009661 Jy/beam ! Combined flux in latest and established models = 0.289116 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.289116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192851Jy sigma=0.001227 ! Fit after self-cal, rms=0.191259Jy sigma=0.001223 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.013 mas, bmaj=35.98 mas, bpa=-11.84 degrees ! Estimated noise=950.792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0985637 Jy ! Component: 100 - total flux cleaned = 0.151786 Jy ! Component: 150 - total flux cleaned = 0.183446 Jy ! Component: 200 - total flux cleaned = 0.203174 Jy ! Total flux subtracted in 200 components = 0.203174 Jy ! Clean residual min=-0.011268 max=0.012224 Jy/beam ! Clean residual mean=-0.000178 rms=0.003670 Jy/beam ! Combined flux in latest and established models = 0.49229 Jy ! Performing phase self-cal ! Adding 127 model components to the UV plane model. ! The established model now contains 153 components and 0.49229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132533Jy sigma=0.000791 ! Fit after self-cal, rms=0.132046Jy sigma=0.000789 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.17 KP 1.07 ! LA 1.00 MK 1.05 NL 0.90 OV 1.01 ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.14 KP 1.02 ! LA 0.95 MK 1.07 NL 1.15 OV 1.03 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.11 KP 1.03 ! LA 0.74 MK 1.01 NL 1.31 OV 0.94 ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 0.40 KP 1.00* ! LA 1.07 MK 0.59 NL 1.00* OV 1.00* ! PT 1.00 ! ! ! Fit before self-cal, rms=0.132046Jy sigma=0.000789 ! Fit after self-cal, rms=0.123494Jy sigma=0.000737 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.023 mas, bmaj=36.53 mas, bpa=-11.84 degrees ! Estimated noise=934.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00308012 Jy ! Component: 100 - total flux cleaned = 0.0034974 Jy ! Component: 150 - total flux cleaned = 0.00339388 Jy ! Component: 200 - total flux cleaned = 0.00339939 Jy ! Total flux subtracted in 200 components = 0.00339939 Jy ! Clean residual min=-0.004759 max=0.005205 Jy/beam ! Clean residual mean=0.000104 rms=0.001554 Jy/beam ! Combined flux in latest and established models = 0.495689 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 193 components and 0.495689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123115Jy sigma=0.000735 ! Fit after self-cal, rms=0.123167Jy sigma=0.000735 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123167Jy sigma=0.000735 ! Fit after self-cal, rms=0.116649Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.977 mas, bmaj=36.69 mas, bpa=-11.87 degrees ! Estimated noise=923.634 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000797078 Jy ! Component: 100 - total flux cleaned = -0.000602788 Jy ! Component: 150 - total flux cleaned = -0.000549723 Jy ! Component: 200 - total flux cleaned = -0.000548617 Jy ! Total flux subtracted in 200 components = -0.000548617 Jy ! Clean residual min=-0.002341 max=0.003140 Jy/beam ! Clean residual mean=-0.000030 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.49514 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 220 components and 0.495141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116577Jy sigma=0.000709 ! Fit after self-cal, rms=0.116619Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299655 Jy ! Component: 100 - total flux cleaned = -0.000345148 Jy ! Component: 150 - total flux cleaned = -0.000390256 Jy ! Component: 200 - total flux cleaned = -0.000430858 Jy ! Total flux subtracted in 200 components = -0.000430858 Jy ! Clean residual min=-0.002431 max=0.002839 Jy/beam ! Clean residual mean=-0.000031 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.49471 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 230 components and 0.49471 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116575Jy sigma=0.000709 ! Fit after self-cal, rms=0.116558Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116558Jy sigma=0.000709 ! Fit after self-cal, rms=0.115512Jy sigma=0.000709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.962 mas, bmaj=36.79 mas, bpa=-11.87 degrees ! Estimated noise=918.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000243867 Jy ! Component: 100 - total flux cleaned = -0.000146936 Jy ! Component: 150 - total flux cleaned = -2.01731e-05 Jy ! Component: 200 - total flux cleaned = 5.71984e-05 Jy ! Total flux subtracted in 200 components = 5.71984e-05 Jy ! Clean residual min=-0.002290 max=0.002726 Jy/beam ! Clean residual mean=-0.000031 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.494767 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 244 components and 0.494767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115470Jy sigma=0.000709 ! Fit after self-cal, rms=0.115460Jy sigma=0.000709 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119116 Jy ! Component: 100 - total flux cleaned = -0.000117303 Jy ! Component: 150 - total flux cleaned = -8.20524e-05 Jy ! Component: 200 - total flux cleaned = -4.85698e-05 Jy ! Total flux subtracted in 200 components = -4.85698e-05 Jy ! Clean residual min=-0.002303 max=0.002695 Jy/beam ! Clean residual mean=-0.000031 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.494718 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 263 components and 0.494718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115432Jy sigma=0.000708 ! Fit after self-cal, rms=0.115429Jy sigma=0.000708 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115429Jy sigma=0.000708 ! Fit after self-cal, rms=0.114362Jy sigma=0.000708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.123 mas, bmaj=37.69 mas, bpa=-8.48 degrees ! Estimated noise=1051.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504394 Jy ! Component: 100 - total flux cleaned = 0.000473797 Jy ! Component: 150 - total flux cleaned = 0.000399483 Jy ! Component: 200 - total flux cleaned = 0.000355361 Jy ! Total flux subtracted in 200 components = 0.000355361 Jy ! Clean residual min=-0.002053 max=0.002654 Jy/beam ! Clean residual mean=-0.000047 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.495074 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 283 components and 0.495074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114350Jy sigma=0.000708 ! Fit after self-cal, rms=0.114345Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.23487e-05 Jy ! Component: 100 - total flux cleaned = -6.16101e-05 Jy ! Component: 150 - total flux cleaned = -8.00282e-05 Jy ! Component: 200 - total flux cleaned = -9.67627e-05 Jy ! Total flux subtracted in 200 components = -9.67627e-05 Jy ! Clean residual min=-0.002035 max=0.002602 Jy/beam ! Clean residual mean=-0.000046 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.494977 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 293 components and 0.494977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114335Jy sigma=0.000708 ! Fit after self-cal, rms=0.114330Jy sigma=0.000708 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.944 mas, bmaj=36.85 mas, bpa=-11.87 degrees ! Estimated noise=912.782 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.944 x 36.85 at -11.87 degrees (North through East) ! Clean map min=-0.0021142 max=0.21302 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=37.35 mas, bpa=-11.84 degrees ! Estimated noise=1877.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174052 Jy ! Component: 100 - total flux cleaned = 0.273784 Jy ! Component: 150 - total flux cleaned = 0.335136 Jy ! Component: 200 - total flux cleaned = 0.376165 Jy ! Total flux subtracted in 200 components = 0.376165 Jy ! Clean residual min=-0.011358 max=0.022807 Jy/beam ! Clean residual mean=-0.000096 rms=0.004706 Jy/beam ! Combined flux in latest and established models = 0.376165 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 71 model components to the UV plane model. ! The established model now contains 71 components and 0.376165 Jy ! Inverting map and beam ! Estimated beam: bmin=3.944 mas, bmaj=36.85 mas, bpa=-11.87 degrees ! Estimated noise=912.782 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493764 Jy ! Component: 100 - total flux cleaned = 0.0775006 Jy ! Component: 150 - total flux cleaned = 0.0946311 Jy ! Component: 200 - total flux cleaned = 0.10541 Jy ! Total flux subtracted in 200 components = 0.10541 Jy ! Clean residual min=-0.004524 max=0.006391 Jy/beam ! Clean residual mean=-0.000070 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.481575 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 176 components and 0.481575 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.123 mas, bmaj=37.69 mas, bpa=-8.48 degrees ! Estimated noise=1051.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00875327 Jy ! Component: 100 - total flux cleaned = 0.0131172 Jy ! Component: 150 - total flux cleaned = 0.0133574 Jy ! Component: 200 - total flux cleaned = 0.0134642 Jy ! Total flux subtracted in 200 components = 0.0134642 Jy ! Clean residual min=-0.002715 max=0.004227 Jy/beam ! Clean residual mean=-0.000055 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.49504 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, 120.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272177 Jy ! Component: 100 - total flux cleaned = 0.00298613 Jy ! Component: 150 - total flux cleaned = 0.00284484 Jy ! Component: 200 - total flux cleaned = 0.00278322 Jy ! Total flux subtracted in 200 components = 0.00278322 Jy ! Clean residual min=-0.002108 max=0.002857 Jy/beam ! Clean residual mean=-0.000041 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.497823 Jy ! Adding 101 model components to the UV plane model. ! The established model now contains 250 components and 0.497823 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.944 mas, bmaj=36.85 mas, bpa=-11.87 degrees ! Estimated noise=912.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649768 Jy ! Component: 100 - total flux cleaned = 0.00065379 Jy ! Component: 150 - total flux cleaned = 0.000720065 Jy ! Component: 200 - total flux cleaned = 0.00089715 Jy ! Total flux subtracted in 200 components = 0.00089715 Jy ! Clean residual min=-0.002169 max=0.002733 Jy/beam ! Clean residual mean=-0.000023 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.49872 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 295 components and 0.49872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114314Jy sigma=0.000708 ! Fit after self-cal, rms=0.114271Jy sigma=0.000708 wmodel J1656-3302_S_2017_10_21_pus_map.mod ! Writing 295 model components to file: J1656-3302_S_2017_10_21_pus_map.mod wobs J1656-3302_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1656-3302_S_2017_10_21_pus_uvs.fits wwins J1656-3302_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1656-3302_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122893 Jy ! Component: 100 - total flux cleaned = 0.00176504 Jy ! Component: 150 - total flux cleaned = 0.00217938 Jy ! Component: 200 - total flux cleaned = 0.00260378 Jy ! Component: 250 - total flux cleaned = 0.00283854 Jy ! Component: 300 - total flux cleaned = 0.00309447 Jy ! Component: 350 - total flux cleaned = 0.00330951 Jy ! Component: 400 - total flux cleaned = 0.00357471 Jy ! Component: 450 - total flux cleaned = 0.0037728 Jy ! Component: 500 - total flux cleaned = 0.00404449 Jy ! Component: 550 - total flux cleaned = 0.00425376 Jy ! Component: 600 - total flux cleaned = 0.00443136 Jy ! Component: 650 - total flux cleaned = 0.00467595 Jy ! Component: 700 - total flux cleaned = 0.00481743 Jy ! Component: 750 - total flux cleaned = 0.00490926 Jy ! Component: 800 - total flux cleaned = 0.00497633 Jy ! Component: 850 - total flux cleaned = 0.00504163 Jy ! Component: 900 - total flux cleaned = 0.00508361 Jy ! Component: 950 - total flux cleaned = 0.00514596 Jy ! Component: 1000 - total flux cleaned = 0.0051864 Jy ! Component: 1050 - total flux cleaned = 0.00520621 Jy ! Component: 1100 - total flux cleaned = 0.00514841 Jy ! Component: 1150 - total flux cleaned = 0.00516756 Jy ! Component: 1200 - total flux cleaned = 0.00514973 Jy ! Component: 1250 - total flux cleaned = 0.00525826 Jy ! Component: 1300 - total flux cleaned = 0.00527558 Jy ! Component: 1350 - total flux cleaned = 0.00525827 Jy ! Component: 1400 - total flux cleaned = 0.00534413 Jy ! Component: 1450 - total flux cleaned = 0.00539413 Jy ! Component: 1500 - total flux cleaned = 0.00541043 Jy ! Component: 1550 - total flux cleaned = 0.00547532 Jy ! Component: 1600 - total flux cleaned = 0.00553921 Jy ! Component: 1650 - total flux cleaned = 0.00561771 Jy ! Component: 1700 - total flux cleaned = 0.00572612 Jy ! Component: 1750 - total flux cleaned = 0.00575652 Jy ! Component: 1800 - total flux cleaned = 0.00581679 Jy ! Component: 1850 - total flux cleaned = 0.00589134 Jy ! Component: 1900 - total flux cleaned = 0.00595009 Jy ! Component: 1950 - total flux cleaned = 0.00595042 Jy ! Component: 2000 - total flux cleaned = 0.00603666 Jy ! Component: 2050 - total flux cleaned = 0.00610733 Jy ! Component: 2100 - total flux cleaned = 0.00609343 Jy ! Component: 2150 - total flux cleaned = 0.0061626 Jy ! Component: 2200 - total flux cleaned = 0.00617619 Jy ! Component: 2250 - total flux cleaned = 0.00620328 Jy ! Component: 2300 - total flux cleaned = 0.00625671 Jy ! Component: 2350 - total flux cleaned = 0.00630938 Jy ! Component: 2400 - total flux cleaned = 0.00636149 Jy ! Component: 2450 - total flux cleaned = 0.00645207 Jy ! Component: 2500 - total flux cleaned = 0.00650321 Jy ! Component: 2550 - total flux cleaned = 0.00657933 Jy ! Component: 2600 - total flux cleaned = 0.00659194 Jy ! Component: 2650 - total flux cleaned = 0.00669183 Jy ! Component: 2700 - total flux cleaned = 0.00672894 Jy ! Component: 2750 - total flux cleaned = 0.00680237 Jy ! Component: 2800 - total flux cleaned = 0.00687498 Jy ! Component: 2850 - total flux cleaned = 0.00692286 Jy ! Component: 2900 - total flux cleaned = 0.00694651 Jy ! Component: 2950 - total flux cleaned = 0.00702931 Jy ! Component: 3000 - total flux cleaned = 0.00708784 Jy ! Component: 3050 - total flux cleaned = 0.00714578 Jy ! Component: 3100 - total flux cleaned = 0.00718026 Jy ! Component: 3150 - total flux cleaned = 0.0072489 Jy ! Component: 3200 - total flux cleaned = 0.00731683 Jy ! Component: 3250 - total flux cleaned = 0.00737293 Jy ! Component: 3300 - total flux cleaned = 0.00746186 Jy ! Component: 3350 - total flux cleaned = 0.0074838 Jy ! Component: 3400 - total flux cleaned = 0.00753866 Jy ! Component: 3450 - total flux cleaned = 0.00759306 Jy ! Component: 3500 - total flux cleaned = 0.00762537 Jy ! Component: 3550 - total flux cleaned = 0.00767885 Jy ! Component: 3600 - total flux cleaned = 0.00771072 Jy ! Component: 3650 - total flux cleaned = 0.00775274 Jy ! Component: 3700 - total flux cleaned = 0.0077632 Jy ! Component: 3750 - total flux cleaned = 0.00780478 Jy ! Component: 3800 - total flux cleaned = 0.00781514 Jy ! Component: 3850 - total flux cleaned = 0.00785623 Jy ! Component: 3900 - total flux cleaned = 0.00788681 Jy ! Component: 3950 - total flux cleaned = 0.00789695 Jy ! Component: 4000 - total flux cleaned = 0.00793727 Jy ! Component: 4050 - total flux cleaned = 0.00796732 Jy ! Total flux subtracted in 4096 components = 0.0080072 Jy ! Clean residual min=-0.000643 max=0.000690 Jy/beam ! Clean residual mean=-0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.506727 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 584 components and 0.506727 Jy ![Exited script file: muppet] wmap "J1656-3302_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.944 x 36.85 at -11.87 degrees (North through East) ! Clean map min=-0.0017928 max=0.21185 Jy/beam ! Writing clean map to FITS file: J1656-3302_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.211846 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201076 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.284748 0.284748 0.569496 1.13899 2.27799 4.55597 9.11194 18.2239 36.4478 72.8955 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.211 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.944 x 36.85 at -11.87 degrees (North through East) ! Clean map min=-0.0017928 max=0.21185 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1656-3302_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:02:38 2019