! Started logfile: J1653-1551_S_2017_01_21_pus_uvs.log on Sun May 5 15:58:57 2019 obs J1653-1551_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J1653-1551_S_2017_01_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.690789 visibilities/baseline/integration-bin. ! Found source: J1653-1551 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 11340 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1653-1551_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 177 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 192 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 455 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.890136Jy sigma=0.005687 ! Fit after self-cal, rms=0.848290Jy sigma=0.005470 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.244 mas, bmaj=6.08 mas, bpa=-6.512 degrees ! Estimated noise=1440.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123435 Jy ! Component: 100 - total flux cleaned = 0.153139 Jy ! Total flux subtracted in 100 components = 0.153139 Jy ! Clean residual min=-0.008740 max=0.012418 Jy/beam ! Clean residual mean=-0.000006 rms=0.002130 Jy/beam ! Combined flux in latest and established models = 0.153139 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.153139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121410Jy sigma=0.000680 ! Fit after self-cal, rms=0.121350Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=6.682 mas, bpa=-5.485 degrees ! Estimated noise=1160.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171927 Jy ! Component: 100 - total flux cleaned = 0.0256287 Jy ! Component: 150 - total flux cleaned = 0.030053 Jy ! Component: 200 - total flux cleaned = 0.032495 Jy ! Total flux subtracted in 200 components = 0.032495 Jy ! Clean residual min=-0.005326 max=0.009261 Jy/beam ! Clean residual mean=-0.000002 rms=0.001658 Jy/beam ! Combined flux in latest and established models = 0.185634 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.185634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119844Jy sigma=0.000660 ! Fit after self-cal, rms=0.119768Jy sigma=0.000660 ! Inverting map ! Added new window around map position (19, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813222 Jy ! Component: 100 - total flux cleaned = 0.011806 Jy ! Component: 150 - total flux cleaned = 0.0131133 Jy ! Component: 200 - total flux cleaned = 0.0130356 Jy ! Total flux subtracted in 200 components = 0.0130356 Jy ! Clean residual min=-0.005237 max=0.007666 Jy/beam ! Clean residual mean=0.000002 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.19867 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.19867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119135Jy sigma=0.000656 ! Fit after self-cal, rms=0.119052Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.97 LA 1.05 ! MK 0.98 NL 0.93 OV 1.46 PT 0.98 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* HN 1.00 LA 0.99 ! MK 1.01 NL 0.96 OV 1.49 PT 0.96 ! SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00* HN 1.01 LA 1.00 ! MK 1.01 NL 0.94 OV 1.40 PT 0.95 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.01 LA 1.10 ! MK 1.08 NL 1.00* OV 1.53 PT 0.96 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.119052Jy sigma=0.000655 ! Fit after self-cal, rms=0.137620Jy sigma=0.000645 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.645 mas, bmaj=6.664 mas, bpa=-5.503 degrees ! Estimated noise=1175.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000621472 Jy ! Component: 100 - total flux cleaned = -0.000617015 Jy ! Component: 150 - total flux cleaned = -0.000613047 Jy ! Component: 200 - total flux cleaned = -0.000524866 Jy ! Total flux subtracted in 200 components = -0.000524866 Jy ! Clean residual min=-0.003812 max=0.003493 Jy/beam ! Clean residual mean=0.000007 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.198145 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 0.198145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137558Jy sigma=0.000644 ! Fit after self-cal, rms=0.138010Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138010Jy sigma=0.000644 ! Fit after self-cal, rms=0.140355Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.64 mas, bmaj=6.662 mas, bpa=-5.482 degrees ! Estimated noise=1176.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.12472e-05 Jy ! Component: 100 - total flux cleaned = -6.65775e-05 Jy ! Component: 150 - total flux cleaned = 0.000133482 Jy ! Component: 200 - total flux cleaned = 0.000304067 Jy ! Total flux subtracted in 200 components = 0.000304067 Jy ! Clean residual min=-0.003615 max=0.003024 Jy/beam ! Clean residual mean=0.000000 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.198449 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 63 components and 0.198449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140323Jy sigma=0.000642 ! Fit after self-cal, rms=0.140394Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000305722 Jy ! Component: 100 - total flux cleaned = -0.000189948 Jy ! Component: 150 - total flux cleaned = -5.72533e-05 Jy ! Component: 200 - total flux cleaned = 6.38083e-05 Jy ! Total flux subtracted in 200 components = 6.38083e-05 Jy ! Clean residual min=-0.003560 max=0.003022 Jy/beam ! Clean residual mean=0.000000 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.198513 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 69 components and 0.198513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140382Jy sigma=0.000642 ! Fit after self-cal, rms=0.140382Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140382Jy sigma=0.000642 ! Fit after self-cal, rms=0.140482Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.636 mas, bmaj=6.662 mas, bpa=-5.47 degrees ! Estimated noise=1172.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000846213 Jy ! Component: 100 - total flux cleaned = -0.000620921 Jy ! Component: 150 - total flux cleaned = -0.000401883 Jy ! Component: 200 - total flux cleaned = -0.00028225 Jy ! Total flux subtracted in 200 components = -0.00028225 Jy ! Clean residual min=-0.003355 max=0.002613 Jy/beam ! Clean residual mean=-0.000001 rms=0.000708 Jy/beam ! Combined flux in latest and established models = 0.198231 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.198231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140460Jy sigma=0.000639 ! Fit after self-cal, rms=0.140490Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000145586 Jy ! Component: 100 - total flux cleaned = -4.03768e-05 Jy ! Component: 150 - total flux cleaned = 7.64243e-05 Jy ! Component: 200 - total flux cleaned = 0.000167154 Jy ! Total flux subtracted in 200 components = 0.000167154 Jy ! Clean residual min=-0.003379 max=0.002550 Jy/beam ! Clean residual mean=-0.000000 rms=0.000704 Jy/beam ! Combined flux in latest and established models = 0.198398 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 0.198398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140482Jy sigma=0.000639 ! Fit after self-cal, rms=0.140482Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140482Jy sigma=0.000639 ! Fit after self-cal, rms=0.141185Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.253 mas, bmaj=12.6 mas, bpa=3.618 degrees ! Estimated noise=1727.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00128514 Jy ! Component: 100 - total flux cleaned = 0.00169915 Jy ! Component: 150 - total flux cleaned = 0.00190921 Jy ! Component: 200 - total flux cleaned = 0.00198063 Jy ! Total flux subtracted in 200 components = 0.00198063 Jy ! Clean residual min=-0.004337 max=0.003105 Jy/beam ! Clean residual mean=0.000000 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.200378 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 0.200378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141178Jy sigma=0.000639 ! Fit after self-cal, rms=0.141190Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.28019e-05 Jy ! Component: 100 - total flux cleaned = 0.000116693 Jy ! Component: 150 - total flux cleaned = 0.000158593 Jy ! Component: 200 - total flux cleaned = 0.000158845 Jy ! Total flux subtracted in 200 components = 0.000158845 Jy ! Clean residual min=-0.004348 max=0.003194 Jy/beam ! Clean residual mean=0.000000 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.200537 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 114 components and 0.200537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141189Jy sigma=0.000639 ! Fit after self-cal, rms=0.141188Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=6.665 mas, bpa=-5.467 degrees ! Estimated noise=1172.1 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.633 x 6.665 at -5.467 degrees (North through East) ! Clean map min=-0.0032903 max=0.16324 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.234 mas, bmaj=6.074 mas, bpa=-6.51 degrees ! Estimated noise=1447.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123321 Jy ! Component: 100 - total flux cleaned = 0.154152 Jy ! Component: 150 - total flux cleaned = 0.169653 Jy ! Component: 200 - total flux cleaned = 0.178841 Jy ! Total flux subtracted in 200 components = 0.178841 Jy ! Clean residual min=-0.004509 max=0.004797 Jy/beam ! Clean residual mean=-0.000003 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.178841 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.178841 Jy ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=6.665 mas, bpa=-5.467 degrees ! Estimated noise=1172.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00732623 Jy ! Component: 100 - total flux cleaned = 0.0118778 Jy ! Component: 150 - total flux cleaned = 0.014448 Jy ! Component: 200 - total flux cleaned = 0.0155928 Jy ! Total flux subtracted in 200 components = 0.0155928 Jy ! Clean residual min=-0.003485 max=0.002996 Jy/beam ! Clean residual mean=-0.000002 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.194434 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 34 components and 0.194434 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.253 mas, bmaj=12.6 mas, bpa=3.618 degrees ! Estimated noise=1727.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317468 Jy ! Component: 100 - total flux cleaned = 0.00456657 Jy ! Component: 150 - total flux cleaned = 0.00523606 Jy ! Component: 200 - total flux cleaned = 0.00538801 Jy ! Total flux subtracted in 200 components = 0.00538801 Jy ! Clean residual min=-0.004142 max=0.003100 Jy/beam ! Clean residual mean=-0.000001 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.199822 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111543 Jy ! Component: 100 - total flux cleaned = 0.000237711 Jy ! Component: 150 - total flux cleaned = 0.000306792 Jy ! Component: 200 - total flux cleaned = 0.000371179 Jy ! Total flux subtracted in 200 components = 0.000371179 Jy ! Clean residual min=-0.004128 max=0.003132 Jy/beam ! Clean residual mean=-0.000000 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.200193 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 61 components and 0.200194 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=6.665 mas, bpa=-5.467 degrees ! Estimated noise=1172.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157052 Jy ! Component: 100 - total flux cleaned = -0.00174868 Jy ! Component: 150 - total flux cleaned = -0.00179613 Jy ! Component: 200 - total flux cleaned = -0.0017537 Jy ! Total flux subtracted in 200 components = -0.0017537 Jy ! Clean residual min=-0.003204 max=0.002625 Jy/beam ! Clean residual mean=-0.000001 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.19844 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 0.19844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141222Jy sigma=0.000639 ! Fit after self-cal, rms=0.141202Jy sigma=0.000639 wmodel J1653-1551_S_2017_01_21_pus_map.mod ! Writing 75 model components to file: J1653-1551_S_2017_01_21_pus_map.mod wobs J1653-1551_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J1653-1551_S_2017_01_21_pus_uvs.fits wwins J1653-1551_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J1653-1551_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00113847 Jy ! Component: 100 - total flux cleaned = -0.00166257 Jy ! Component: 150 - total flux cleaned = -0.00210693 Jy ! Component: 200 - total flux cleaned = -0.00253092 Jy ! Component: 250 - total flux cleaned = -0.00285679 Jy ! Component: 300 - total flux cleaned = -0.00301367 Jy ! Component: 350 - total flux cleaned = -0.0031652 Jy ! Component: 400 - total flux cleaned = -0.00309016 Jy ! Component: 450 - total flux cleaned = -0.00298164 Jy ! Component: 500 - total flux cleaned = -0.00301717 Jy ! Component: 550 - total flux cleaned = -0.00298261 Jy ! Component: 600 - total flux cleaned = -0.00308342 Jy ! Component: 650 - total flux cleaned = -0.00304969 Jy ! Component: 700 - total flux cleaned = -0.00301778 Jy ! Component: 750 - total flux cleaned = -0.00308156 Jy ! Component: 800 - total flux cleaned = -0.00301773 Jy ! Component: 850 - total flux cleaned = -0.00289422 Jy ! Component: 900 - total flux cleaned = -0.00295448 Jy ! Component: 950 - total flux cleaned = -0.00286547 Jy ! Component: 1000 - total flux cleaned = -0.00298257 Jy ! Component: 1050 - total flux cleaned = -0.00301093 Jy ! Component: 1100 - total flux cleaned = -0.00301063 Jy ! Component: 1150 - total flux cleaned = -0.00301042 Jy ! Component: 1200 - total flux cleaned = -0.00301013 Jy ! Component: 1250 - total flux cleaned = -0.00301006 Jy ! Component: 1300 - total flux cleaned = -0.00301024 Jy ! Component: 1350 - total flux cleaned = -0.00295767 Jy ! Component: 1400 - total flux cleaned = -0.00301024 Jy ! Component: 1450 - total flux cleaned = -0.00301042 Jy ! Component: 1500 - total flux cleaned = -0.0029596 Jy ! Component: 1550 - total flux cleaned = -0.00293418 Jy ! Component: 1600 - total flux cleaned = -0.0029094 Jy ! Component: 1650 - total flux cleaned = -0.00286023 Jy ! Component: 1700 - total flux cleaned = -0.00273913 Jy ! Component: 1750 - total flux cleaned = -0.00276325 Jy ! Component: 1800 - total flux cleaned = -0.00262133 Jy ! Component: 1850 - total flux cleaned = -0.00259789 Jy ! Component: 1900 - total flux cleaned = -0.00255138 Jy ! Component: 1950 - total flux cleaned = -0.00241403 Jy ! Component: 2000 - total flux cleaned = -0.00241398 Jy ! Component: 2050 - total flux cleaned = -0.00227995 Jy ! Component: 2100 - total flux cleaned = -0.0021918 Jy ! Component: 2150 - total flux cleaned = -0.00212619 Jy ! Component: 2200 - total flux cleaned = -0.00203945 Jy ! Component: 2250 - total flux cleaned = -0.00199646 Jy ! Component: 2300 - total flux cleaned = -0.00197506 Jy ! Component: 2350 - total flux cleaned = -0.0019123 Jy ! Component: 2400 - total flux cleaned = -0.00191208 Jy ! Component: 2450 - total flux cleaned = -0.00185018 Jy ! Component: 2500 - total flux cleaned = -0.00182967 Jy ! Component: 2550 - total flux cleaned = -0.0017284 Jy ! Component: 2600 - total flux cleaned = -0.00172831 Jy ! Component: 2650 - total flux cleaned = -0.00162906 Jy ! Component: 2700 - total flux cleaned = -0.00156996 Jy ! Component: 2750 - total flux cleaned = -0.00158947 Jy ! Component: 2800 - total flux cleaned = -0.0015121 Jy ! Component: 2850 - total flux cleaned = -0.00149295 Jy ! Component: 2900 - total flux cleaned = -0.00147388 Jy ! Component: 2950 - total flux cleaned = -0.00147404 Jy ! Component: 3000 - total flux cleaned = -0.00143669 Jy ! Component: 3050 - total flux cleaned = -0.00141812 Jy ! Component: 3100 - total flux cleaned = -0.00139958 Jy ! Component: 3150 - total flux cleaned = -0.00136312 Jy ! Component: 3200 - total flux cleaned = -0.00132703 Jy ! Component: 3250 - total flux cleaned = -0.00130899 Jy ! Component: 3300 - total flux cleaned = -0.00121968 Jy ! Component: 3350 - total flux cleaned = -0.00123757 Jy ! Component: 3400 - total flux cleaned = -0.00116707 Jy ! Component: 3450 - total flux cleaned = -0.0010974 Jy ! Component: 3500 - total flux cleaned = -0.00109749 Jy ! Component: 3550 - total flux cleaned = -0.00108009 Jy ! Component: 3600 - total flux cleaned = -0.000994577 Jy ! Component: 3650 - total flux cleaned = -0.000994659 Jy ! Component: 3700 - total flux cleaned = -0.000927218 Jy ! Component: 3750 - total flux cleaned = -0.000893724 Jy ! Component: 3800 - total flux cleaned = -0.000893695 Jy ! Component: 3850 - total flux cleaned = -0.000827502 Jy ! Component: 3900 - total flux cleaned = -0.000778373 Jy ! Component: 3950 - total flux cleaned = -0.000778415 Jy ! Component: 4000 - total flux cleaned = -0.000729988 Jy ! Component: 4050 - total flux cleaned = -0.000730113 Jy ! Total flux subtracted in 4096 components = -0.000666145 Jy ! Clean residual min=-0.000993 max=0.000815 Jy/beam ! Clean residual mean=-0.000000 rms=0.000290 Jy/beam ! Combined flux in latest and established models = 0.197774 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 367 components and 0.197774 Jy ![Exited script file: muppet] wmap "J1653-1551_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.633 x 6.665 at -5.467 degrees (North through East) ! Clean map min=-0.0022279 max=0.16278 Jy/beam ! Writing clean map to FITS file: J1653-1551_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.162781 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000287882 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.530558 0.530558 1.06112 2.12223 4.24446 8.48892 16.9778 33.9557 67.9114 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.162 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.633 x 6.665 at -5.467 degrees (North through East) ! Clean map min=-0.0022279 max=0.16278 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1653-1551_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:59:02 2019