! Started logfile: J1650+0824_S_2017_05_27_pus_uvs.log on Fri May 3 11:11:12 2019 obs J1650+0824_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J1650+0824_S_2017_05_27_pus_uva.fits ! AN table 1: 172 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.853488 visibilities/baseline/integration-bin. ! Found source: J1650+0824 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 26424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1650+0824_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 222 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 999 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.859104Jy sigma=0.027448 ! Fit after self-cal, rms=0.820420Jy sigma=0.027372 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=7.387 mas, bpa=-4.084 degrees ! Estimated noise=736.372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.116039 Jy ! Component: 100 - total flux cleaned = 0.145596 Jy ! Total flux subtracted in 100 components = 0.145596 Jy ! Clean residual min=-0.022013 max=0.024169 Jy/beam ! Clean residual mean=-0.000047 rms=0.009653 Jy/beam ! Combined flux in latest and established models = 0.145596 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.145596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138298Jy sigma=0.003641 ! Fit after self-cal, rms=0.138264Jy sigma=0.003639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=8.22 mas, bpa=-2.098 degrees ! Estimated noise=510.049 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00939837 Jy ! Component: 100 - total flux cleaned = 0.00876516 Jy ! Component: 150 - total flux cleaned = 0.00823774 Jy ! Component: 200 - total flux cleaned = 0.00759742 Jy ! Total flux subtracted in 200 components = 0.00759742 Jy ! Clean residual min=-0.023851 max=0.024962 Jy/beam ! Clean residual mean=-0.000045 rms=0.010094 Jy/beam ! Combined flux in latest and established models = 0.153193 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.153193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132843Jy sigma=0.003869 ! Fit after self-cal, rms=0.132802Jy sigma=0.003869 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.85 HN 0.90 KP 0.90 ! LA 0.88 MK 0.99 NL 0.81 OV 0.93 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.87 HN 0.94 KP 0.85 ! LA 0.86 MK 0.98 NL 0.92 OV 0.96 ! PT 0.91 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 12.06 FD 0.90 HN 0.92 KP 0.88 ! LA 0.89 MK 1.03 NL 0.89 OV 0.87 ! PT 0.91 SC 1.06 ! ! ! Correcting IF 4. ! A total of 168 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.92 KP 1.00* ! LA 0.90 MK 1.06 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.132802Jy sigma=0.003869 ! Fit after self-cal, rms=1.383056Jy sigma=0.000745 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.751 mas, bmaj=8.267 mas, bpa=-2.535 degrees ! Estimated noise=532.474 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00515939 Jy ! Component: 100 - total flux cleaned = 0.00445157 Jy ! Component: 150 - total flux cleaned = 0.00363338 Jy ! Component: 200 - total flux cleaned = 0.00273003 Jy ! Total flux subtracted in 200 components = 0.00273003 Jy ! Clean residual min=-0.006646 max=0.005480 Jy/beam ! Clean residual mean=-0.000019 rms=0.001341 Jy/beam ! Combined flux in latest and established models = 0.155923 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.155923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.380310Jy sigma=0.000748 ! Fit after self-cal, rms=1.380496Jy sigma=0.000747 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.380496Jy sigma=0.000747 ! Fit after self-cal, rms=1.866932Jy sigma=0.000717 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.741 mas, bmaj=8.266 mas, bpa=-2.852 degrees ! Estimated noise=547.623 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486926 Jy ! Component: 100 - total flux cleaned = 0.00404295 Jy ! Component: 150 - total flux cleaned = 0.0031706 Jy ! Component: 200 - total flux cleaned = 0.00252591 Jy ! Total flux subtracted in 200 components = 0.00252591 Jy ! Clean residual min=-0.005392 max=0.005229 Jy/beam ! Clean residual mean=-0.000017 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.158449 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.158449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.865608Jy sigma=0.000718 ! Fit after self-cal, rms=1.865605Jy sigma=0.000718 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000584937 Jy ! Component: 100 - total flux cleaned = -0.00120344 Jy ! Component: 150 - total flux cleaned = -0.00157391 Jy ! Component: 200 - total flux cleaned = -0.00191533 Jy ! Total flux subtracted in 200 components = -0.00191533 Jy ! Clean residual min=-0.005051 max=0.005281 Jy/beam ! Clean residual mean=-0.000019 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.156534 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.156534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.865038Jy sigma=0.000719 ! Fit after self-cal, rms=1.865037Jy sigma=0.000719 ! Inverting map ! Added new window around map position (-6, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000430849 Jy ! Component: 100 - total flux cleaned = -0.00060492 Jy ! Component: 150 - total flux cleaned = -0.000471742 Jy ! Component: 200 - total flux cleaned = -0.000212319 Jy ! Total flux subtracted in 200 components = -0.000212319 Jy ! Clean residual min=-0.005031 max=0.003866 Jy/beam ! Clean residual mean=-0.000016 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.156322 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.156322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.864163Jy sigma=0.000718 ! Fit after self-cal, rms=1.864150Jy sigma=0.000718 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.864150Jy sigma=0.000718 ! Fit after self-cal, rms=2.117398Jy sigma=0.000688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=8.224 mas, bpa=-2.694 degrees ! Estimated noise=553.697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350542 Jy ! Component: 100 - total flux cleaned = 0.00381377 Jy ! Component: 150 - total flux cleaned = 0.00381327 Jy ! Component: 200 - total flux cleaned = 0.00373481 Jy ! Total flux subtracted in 200 components = 0.00373481 Jy ! Clean residual min=-0.003607 max=0.003453 Jy/beam ! Clean residual mean=-0.000006 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.160056 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.160056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.116827Jy sigma=0.000688 ! Fit after self-cal, rms=2.116827Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121698 Jy ! Component: 100 - total flux cleaned = -1.88848e-05 Jy ! Component: 150 - total flux cleaned = -1.84862e-05 Jy ! Component: 200 - total flux cleaned = -8.19756e-05 Jy ! Total flux subtracted in 200 components = -8.19756e-05 Jy ! Clean residual min=-0.003625 max=0.003415 Jy/beam ! Clean residual mean=-0.000005 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.159974 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 74 components and 0.159974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.116516Jy sigma=0.000687 ! Fit after self-cal, rms=2.116515Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.116515Jy sigma=0.000687 ! Fit after self-cal, rms=2.200835Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.491 mas, bmaj=12.22 mas, bpa=-6.743 degrees ! Estimated noise=652.824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00283131 Jy ! Component: 100 - total flux cleaned = 0.00314716 Jy ! Component: 150 - total flux cleaned = 0.00302225 Jy ! Component: 200 - total flux cleaned = 0.00279113 Jy ! Total flux subtracted in 200 components = 0.00279113 Jy ! Clean residual min=-0.003870 max=0.004143 Jy/beam ! Clean residual mean=-0.000009 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.162766 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.162766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.200363Jy sigma=0.000687 ! Fit after self-cal, rms=2.200361Jy sigma=0.000687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230404 Jy ! Component: 100 - total flux cleaned = -0.000441535 Jy ! Component: 150 - total flux cleaned = -0.000636767 Jy ! Component: 200 - total flux cleaned = -0.000773784 Jy ! Total flux subtracted in 200 components = -0.000773784 Jy ! Clean residual min=-0.003876 max=0.004244 Jy/beam ! Clean residual mean=-0.000010 rms=0.001056 Jy/beam ! Combined flux in latest and established models = 0.161992 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 97 components and 0.161992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.200155Jy sigma=0.000688 ! Fit after self-cal, rms=2.200155Jy sigma=0.000688 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=8.207 mas, bpa=-2.577 degrees ! Estimated noise=562.265 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 8.207 at -2.577 degrees (North through East) ! Clean map min=-0.01359 max=0.17633 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.107 mas, bmaj=7.331 mas, bpa=-4.393 degrees ! Estimated noise=818.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128573 Jy ! Component: 100 - total flux cleaned = 0.160009 Jy ! Component: 150 - total flux cleaned = 0.164584 Jy ! Component: 200 - total flux cleaned = 0.165456 Jy ! Total flux subtracted in 200 components = 0.165456 Jy ! Clean residual min=-0.008251 max=0.006508 Jy/beam ! Clean residual mean=-0.000011 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 0.165456 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.165456 Jy ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=8.207 mas, bpa=-2.577 degrees ! Estimated noise=562.265 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013787 Jy ! Component: 100 - total flux cleaned = 0.00138143 Jy ! Component: 150 - total flux cleaned = 0.00138342 Jy ! Component: 200 - total flux cleaned = 0.00119911 Jy ! Total flux subtracted in 200 components = 0.00119911 Jy ! Clean residual min=-0.004252 max=0.003436 Jy/beam ! Clean residual mean=-0.000006 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.166655 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 0.166655 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.491 mas, bmaj=12.22 mas, bpa=-6.743 degrees ! Estimated noise=652.824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410807 Jy ! Component: 100 - total flux cleaned = -0.00106644 Jy ! Component: 150 - total flux cleaned = -0.0014967 Jy ! Component: 200 - total flux cleaned = -0.00187497 Jy ! Total flux subtracted in 200 components = -0.00187497 Jy ! Clean residual min=-0.003713 max=0.004118 Jy/beam ! Clean residual mean=-0.000008 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.16478 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000227515 Jy ! Component: 100 - total flux cleaned = -0.000637474 Jy ! Component: 150 - total flux cleaned = -0.00101417 Jy ! Component: 200 - total flux cleaned = -0.00136177 Jy ! Total flux subtracted in 200 components = -0.00136177 Jy ! Clean residual min=-0.003815 max=0.004298 Jy/beam ! Clean residual mean=-0.000009 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.163418 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 73 components and 0.163418 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=8.207 mas, bpa=-2.577 degrees ! Estimated noise=562.265 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000508279 Jy ! Component: 100 - total flux cleaned = -0.00061306 Jy ! Component: 150 - total flux cleaned = -0.0007095 Jy ! Component: 200 - total flux cleaned = -0.000884319 Jy ! Total flux subtracted in 200 components = -0.000884319 Jy ! Clean residual min=-0.003717 max=0.003608 Jy/beam ! Clean residual mean=-0.000005 rms=0.000876 Jy/beam ! Combined flux in latest and established models = 0.162534 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 89 components and 0.162534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.200470Jy sigma=0.000688 ! Fit after self-cal, rms=2.200460Jy sigma=0.000688 wmodel J1650+0824_S_2017_05_27_pus_map.mod ! Writing 89 model components to file: J1650+0824_S_2017_05_27_pus_map.mod wobs J1650+0824_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J1650+0824_S_2017_05_27_pus_uvs.fits wwins J1650+0824_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J1650+0824_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016599 Jy ! Component: 100 - total flux cleaned = 0.000371183 Jy ! Component: 150 - total flux cleaned = 0.000370988 Jy ! Component: 200 - total flux cleaned = 0.000479421 Jy ! Component: 250 - total flux cleaned = 0.00063707 Jy ! Component: 300 - total flux cleaned = 0.000842417 Jy ! Component: 350 - total flux cleaned = 0.000992842 Jy ! Component: 400 - total flux cleaned = 0.00118966 Jy ! Component: 450 - total flux cleaned = 0.00133472 Jy ! Component: 500 - total flux cleaned = 0.00143008 Jy ! Component: 550 - total flux cleaned = 0.00147749 Jy ! Component: 600 - total flux cleaned = 0.00157056 Jy ! Component: 650 - total flux cleaned = 0.00161662 Jy ! Component: 700 - total flux cleaned = 0.00175322 Jy ! Component: 750 - total flux cleaned = 0.00188779 Jy ! Component: 800 - total flux cleaned = 0.00197692 Jy ! Component: 850 - total flux cleaned = 0.00206505 Jy ! Component: 900 - total flux cleaned = 0.00228297 Jy ! Component: 950 - total flux cleaned = 0.00241272 Jy ! Component: 1000 - total flux cleaned = 0.00258461 Jy ! Component: 1050 - total flux cleaned = 0.00275496 Jy ! Component: 1100 - total flux cleaned = 0.00296591 Jy ! Component: 1150 - total flux cleaned = 0.00304985 Jy ! Component: 1200 - total flux cleaned = 0.00321637 Jy ! Component: 1250 - total flux cleaned = 0.00338202 Jy ! Component: 1300 - total flux cleaned = 0.00354623 Jy ! Component: 1350 - total flux cleaned = 0.00362771 Jy ! Component: 1400 - total flux cleaned = 0.0038297 Jy ! Component: 1450 - total flux cleaned = 0.00382981 Jy ! Component: 1500 - total flux cleaned = 0.00391001 Jy ! Component: 1550 - total flux cleaned = 0.0041085 Jy ! Component: 1600 - total flux cleaned = 0.00418718 Jy ! Component: 1650 - total flux cleaned = 0.00430501 Jy ! Component: 1700 - total flux cleaned = 0.00442213 Jy ! Component: 1750 - total flux cleaned = 0.00446077 Jy ! Component: 1800 - total flux cleaned = 0.00461504 Jy ! Component: 1850 - total flux cleaned = 0.0047686 Jy ! Component: 1900 - total flux cleaned = 0.00488273 Jy ! Component: 1950 - total flux cleaned = 0.0049964 Jy ! Component: 2000 - total flux cleaned = 0.00507207 Jy ! Component: 2050 - total flux cleaned = 0.0052225 Jy ! Component: 2100 - total flux cleaned = 0.00525976 Jy ! Component: 2150 - total flux cleaned = 0.0053715 Jy ! Component: 2200 - total flux cleaned = 0.0054084 Jy ! Component: 2250 - total flux cleaned = 0.00548224 Jy ! Component: 2300 - total flux cleaned = 0.00562926 Jy ! Component: 2350 - total flux cleaned = 0.00570254 Jy ! Component: 2400 - total flux cleaned = 0.00570254 Jy ! Component: 2450 - total flux cleaned = 0.00577508 Jy ! Component: 2500 - total flux cleaned = 0.00581129 Jy ! Component: 2550 - total flux cleaned = 0.00588355 Jy ! Component: 2600 - total flux cleaned = 0.00595537 Jy ! Component: 2650 - total flux cleaned = 0.00599128 Jy ! Component: 2700 - total flux cleaned = 0.00599137 Jy ! Component: 2750 - total flux cleaned = 0.00609803 Jy ! Component: 2800 - total flux cleaned = 0.0061333 Jy ! Component: 2850 - total flux cleaned = 0.00616855 Jy ! Component: 2900 - total flux cleaned = 0.00627393 Jy ! Component: 2950 - total flux cleaned = 0.00627399 Jy ! Component: 3000 - total flux cleaned = 0.0063437 Jy ! Component: 3050 - total flux cleaned = 0.0064131 Jy ! Component: 3100 - total flux cleaned = 0.00651712 Jy ! Component: 3150 - total flux cleaned = 0.0066554 Jy ! Component: 3200 - total flux cleaned = 0.00665534 Jy ! Component: 3250 - total flux cleaned = 0.0067584 Jy ! Component: 3300 - total flux cleaned = 0.0067583 Jy ! Component: 3350 - total flux cleaned = 0.00686083 Jy ! Component: 3400 - total flux cleaned = 0.00699694 Jy ! Component: 3450 - total flux cleaned = 0.00703059 Jy ! Component: 3500 - total flux cleaned = 0.00706428 Jy ! Component: 3550 - total flux cleaned = 0.00703057 Jy ! Component: 3600 - total flux cleaned = 0.00706439 Jy ! Component: 3650 - total flux cleaned = 0.00716522 Jy ! Component: 3700 - total flux cleaned = 0.00726566 Jy ! Component: 3750 - total flux cleaned = 0.00719879 Jy ! Component: 3800 - total flux cleaned = 0.00726565 Jy ! Component: 3850 - total flux cleaned = 0.00733221 Jy ! Component: 3900 - total flux cleaned = 0.00739864 Jy ! Component: 3950 - total flux cleaned = 0.00746475 Jy ! Component: 4000 - total flux cleaned = 0.00749776 Jy ! Component: 4050 - total flux cleaned = 0.00753058 Jy ! Total flux subtracted in 4096 components = 0.0075961 Jy ! Clean residual min=-0.001817 max=0.001784 Jy/beam ! Clean residual mean=-0.000004 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.17013 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 359 components and 0.17013 Jy ![Exited script file: muppet] wmap "J1650+0824_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 8.207 at -2.577 degrees (North through East) ! Clean map min=-0.014361 max=0.17623 Jy/beam ! Writing clean map to FITS file: J1650+0824_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.176232 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000619639 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.05481 1.05481 2.10962 4.21924 8.43849 16.877 33.754 67.5079 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.176 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 8.207 at -2.577 degrees (North through East) ! Clean map min=-0.014361 max=0.17623 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1650+0824_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:11:17 2019