! Started logfile: J1648-3301_S_2017_07_16_pus_uvs.log on Thu May 9 11:13:18 2019 obs J1648-3301_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J1648-3301_S_2017_07_16_pus_uva.fits ! AN table 1: 75 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.439407 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1648-3301 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 5932 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1648-3301_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 320 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 268 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 268 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 648 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.739481Jy sigma=0.004383 ! Fit after self-cal, rms=0.709759Jy sigma=0.004187 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=5.826 mas, bpa=-7.203 degrees ! Estimated noise=2494.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.220827 Jy ! Component: 100 - total flux cleaned = 0.288571 Jy ! Total flux subtracted in 100 components = 0.288571 Jy ! Clean residual min=-0.018335 max=0.037834 Jy/beam ! Clean residual mean=-0.000039 rms=0.007664 Jy/beam ! Combined flux in latest and established models = 0.288571 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.288571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150997Jy sigma=0.000910 ! Fit after self-cal, rms=0.151064Jy sigma=0.000910 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.875 mas, bmaj=6.592 mas, bpa=-4.721 degrees ! Estimated noise=1881.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0608349 Jy ! Component: 100 - total flux cleaned = 0.0920682 Jy ! Component: 150 - total flux cleaned = 0.11022 Jy ! Component: 200 - total flux cleaned = 0.120898 Jy ! Total flux subtracted in 200 components = 0.120898 Jy ! Clean residual min=-0.013177 max=0.026282 Jy/beam ! Clean residual mean=0.000025 rms=0.005113 Jy/beam ! Combined flux in latest and established models = 0.40947 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.40947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130405Jy sigma=0.000728 ! Fit after self-cal, rms=0.130421Jy sigma=0.000728 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.96 FD 1.00* HN 1.21 KP 1.01 ! LA 0.94 MK 0.99 NL 1.00* OV 0.96 ! PT 0.97 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.29 KP 0.96 ! LA 0.91 MK 1.01 NL 1.15 OV 0.97 ! PT 0.92 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.26 KP 0.96 ! LA 0.93 MK 1.07 NL 1.10 OV 0.89 ! PT 0.91 SC 1.01 ! ! ! Correcting IF 4. ! A total of 102 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.130421Jy sigma=0.000728 ! Fit after self-cal, rms=0.137188Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=6.738 mas, bpa=-2.653 degrees ! Estimated noise=1896.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000970139 Jy ! Component: 100 - total flux cleaned = -0.00113483 Jy ! Component: 150 - total flux cleaned = -0.00120607 Jy ! Component: 200 - total flux cleaned = -0.00139807 Jy ! Total flux subtracted in 200 components = -0.00139807 Jy ! Clean residual min=-0.010533 max=0.011077 Jy/beam ! Clean residual mean=0.000033 rms=0.002780 Jy/beam ! Combined flux in latest and established models = 0.408072 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.408072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137102Jy sigma=0.000669 ! Fit after self-cal, rms=0.137623Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137623Jy sigma=0.000668 ! Fit after self-cal, rms=0.136135Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.949 mas, bmaj=6.733 mas, bpa=-2.611 degrees ! Estimated noise=1893.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.7317e-05 Jy ! Component: 100 - total flux cleaned = -1.72412e-05 Jy ! Component: 150 - total flux cleaned = -5.74331e-05 Jy ! Component: 200 - total flux cleaned = -9.49903e-05 Jy ! Total flux subtracted in 200 components = -9.49903e-05 Jy ! Clean residual min=-0.004975 max=0.005002 Jy/beam ! Clean residual mean=0.000006 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.407977 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.407977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136103Jy sigma=0.000649 ! Fit after self-cal, rms=0.136173Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120901 Jy ! Component: 100 - total flux cleaned = -0.000118827 Jy ! Component: 150 - total flux cleaned = -0.000151127 Jy ! Component: 200 - total flux cleaned = -0.000183853 Jy ! Total flux subtracted in 200 components = -0.000183853 Jy ! Clean residual min=-0.004901 max=0.004947 Jy/beam ! Clean residual mean=0.000006 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.407793 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 59 components and 0.407793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136150Jy sigma=0.000649 ! Fit after self-cal, rms=0.136154Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136154Jy sigma=0.000649 ! Fit after self-cal, rms=0.136521Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=6.724 mas, bpa=-2.617 degrees ! Estimated noise=1890.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150549 Jy ! Component: 100 - total flux cleaned = -0.000149706 Jy ! Component: 150 - total flux cleaned = -0.000178031 Jy ! Component: 200 - total flux cleaned = -0.000235599 Jy ! Total flux subtracted in 200 components = -0.000235599 Jy ! Clean residual min=-0.004652 max=0.004847 Jy/beam ! Clean residual mean=0.000002 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 0.407557 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.407557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136501Jy sigma=0.000648 ! Fit after self-cal, rms=0.136520Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (56, 112). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00168852 Jy ! Component: 100 - total flux cleaned = 0.000972077 Jy ! Component: 150 - total flux cleaned = 0.000427389 Jy ! Component: 200 - total flux cleaned = 0.000304654 Jy ! Total flux subtracted in 200 components = 0.000304654 Jy ! Clean residual min=-0.004153 max=0.003939 Jy/beam ! Clean residual mean=0.000002 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.407862 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.407862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136329Jy sigma=0.000647 ! Fit after self-cal, rms=0.136327Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136327Jy sigma=0.000647 ! Fit after self-cal, rms=0.136310Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.69 mas, bmaj=19.53 mas, bpa=-2.168 degrees ! Estimated noise=2445.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675701 Jy ! Component: 100 - total flux cleaned = 0.000699712 Jy ! Component: 150 - total flux cleaned = 0.000719865 Jy ! Component: 200 - total flux cleaned = 0.000720015 Jy ! Total flux subtracted in 200 components = 0.000720015 Jy ! Clean residual min=-0.002867 max=0.003386 Jy/beam ! Clean residual mean=0.000004 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.408582 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.408582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136304Jy sigma=0.000647 ! Fit after self-cal, rms=0.136307Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130614 Jy ! Component: 100 - total flux cleaned = 0.000150353 Jy ! Component: 150 - total flux cleaned = 0.000169725 Jy ! Component: 200 - total flux cleaned = 0.000187549 Jy ! Total flux subtracted in 200 components = 0.000187549 Jy ! Clean residual min=-0.002891 max=0.003394 Jy/beam ! Clean residual mean=0.000004 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.408769 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 0.408769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136301Jy sigma=0.000647 ! Fit after self-cal, rms=0.136299Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.718 mas, bpa=-2.617 degrees ! Estimated noise=1885.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.941 x 6.718 at -2.617 degrees (North through East) ! Clean map min=-0.0038986 max=0.30344 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.543 mas, bmaj=5.9 mas, bpa=-4.205 degrees ! Estimated noise=2458.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228353 Jy ! Component: 100 - total flux cleaned = 0.299263 Jy ! Component: 150 - total flux cleaned = 0.339465 Jy ! Component: 200 - total flux cleaned = 0.363219 Jy ! Total flux subtracted in 200 components = 0.363219 Jy ! Clean residual min=-0.008341 max=0.012724 Jy/beam ! Clean residual mean=-0.000031 rms=0.002502 Jy/beam ! Combined flux in latest and established models = 0.363219 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.363219 Jy ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.718 mas, bpa=-2.617 degrees ! Estimated noise=1885.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019829 Jy ! Component: 100 - total flux cleaned = 0.0298823 Jy ! Component: 150 - total flux cleaned = 0.0345134 Jy ! Component: 200 - total flux cleaned = 0.0369857 Jy ! Total flux subtracted in 200 components = 0.0369857 Jy ! Clean residual min=-0.004084 max=0.004377 Jy/beam ! Clean residual mean=-0.000005 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.400204 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 70 components and 0.400204 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.69 mas, bmaj=19.53 mas, bpa=-2.168 degrees ! Estimated noise=2445.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475893 Jy ! Component: 100 - total flux cleaned = 0.00581872 Jy ! Component: 150 - total flux cleaned = 0.0063013 Jy ! Component: 200 - total flux cleaned = 0.00664813 Jy ! Total flux subtracted in 200 components = 0.00664813 Jy ! Clean residual min=-0.003183 max=0.003457 Jy/beam ! Clean residual mean=0.000002 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 0.406852 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000210178 Jy ! Component: 100 - total flux cleaned = 0.000338413 Jy ! Component: 150 - total flux cleaned = 0.000394405 Jy ! Component: 200 - total flux cleaned = 0.000429066 Jy ! Total flux subtracted in 200 components = 0.000429066 Jy ! Clean residual min=-0.003124 max=0.003399 Jy/beam ! Clean residual mean=0.000003 rms=0.000941 Jy/beam ! Combined flux in latest and established models = 0.407281 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 91 components and 0.407281 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=6.718 mas, bpa=-2.617 degrees ! Estimated noise=1885.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.83205e-07 Jy ! Component: 100 - total flux cleaned = -0.000479251 Jy ! Component: 150 - total flux cleaned = -0.000699692 Jy ! Component: 200 - total flux cleaned = -0.000794102 Jy ! Total flux subtracted in 200 components = -0.000794102 Jy ! Clean residual min=-0.003842 max=0.003901 Jy/beam ! Clean residual mean=0.000001 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.406487 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.406487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136315Jy sigma=0.000647 ! Fit after self-cal, rms=0.136285Jy sigma=0.000647 wmodel J1648-3301_S_2017_07_16_pus_map.mod ! Writing 105 model components to file: J1648-3301_S_2017_07_16_pus_map.mod wobs J1648-3301_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J1648-3301_S_2017_07_16_pus_uvs.fits wwins J1648-3301_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J1648-3301_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000323061 Jy ! Component: 100 - total flux cleaned = -0.000579086 Jy ! Component: 150 - total flux cleaned = -0.000638248 Jy ! Component: 200 - total flux cleaned = -0.00052902 Jy ! Component: 250 - total flux cleaned = -0.000321969 Jy ! Component: 300 - total flux cleaned = -0.00012112 Jy ! Component: 350 - total flux cleaned = 0.000121174 Jy ! Component: 400 - total flux cleaned = 0.000353704 Jy ! Component: 450 - total flux cleaned = 0.000443219 Jy ! Component: 500 - total flux cleaned = 0.000575277 Jy ! Component: 550 - total flux cleaned = 0.000787573 Jy ! Component: 600 - total flux cleaned = 0.000869902 Jy ! Component: 650 - total flux cleaned = 0.000949849 Jy ! Component: 700 - total flux cleaned = 0.00095058 Jy ! Component: 750 - total flux cleaned = 0.000989273 Jy ! Component: 800 - total flux cleaned = 0.000952366 Jy ! Component: 850 - total flux cleaned = 0.000988422 Jy ! Component: 900 - total flux cleaned = 0.000846276 Jy ! Component: 950 - total flux cleaned = 0.00077656 Jy ! Component: 1000 - total flux cleaned = 0.000674283 Jy ! Component: 1050 - total flux cleaned = 0.000507532 Jy ! Component: 1100 - total flux cleaned = 0.000376838 Jy ! Component: 1150 - total flux cleaned = 0.000248086 Jy ! Component: 1200 - total flux cleaned = 5.88843e-05 Jy ! Component: 1250 - total flux cleaned = -3.43298e-05 Jy ! Component: 1300 - total flux cleaned = -0.000186699 Jy ! Component: 1350 - total flux cleaned = -0.000246801 Jy ! Component: 1400 - total flux cleaned = -0.000335363 Jy ! Component: 1450 - total flux cleaned = -0.000450857 Jy ! Component: 1500 - total flux cleaned = -0.00050758 Jy ! Component: 1550 - total flux cleaned = -0.000564129 Jy ! Component: 1600 - total flux cleaned = -0.000702601 Jy ! Component: 1650 - total flux cleaned = -0.000784335 Jy ! Component: 1700 - total flux cleaned = -0.000891815 Jy ! Component: 1750 - total flux cleaned = -0.00105082 Jy ! Component: 1800 - total flux cleaned = -0.00118154 Jy ! Component: 1850 - total flux cleaned = -0.00131041 Jy ! Component: 1900 - total flux cleaned = -0.00143809 Jy ! Component: 1950 - total flux cleaned = -0.00153964 Jy ! Component: 2000 - total flux cleaned = -0.00168921 Jy ! Component: 2050 - total flux cleaned = -0.00176314 Jy ! Component: 2100 - total flux cleaned = -0.00186066 Jy ! Component: 2150 - total flux cleaned = -0.00198157 Jy ! Component: 2200 - total flux cleaned = -0.00207708 Jy ! Component: 2250 - total flux cleaned = -0.00217163 Jy ! Component: 2300 - total flux cleaned = -0.00224173 Jy ! Component: 2350 - total flux cleaned = -0.00233435 Jy ! Component: 2400 - total flux cleaned = -0.00238011 Jy ! Component: 2450 - total flux cleaned = -0.00242553 Jy ! Component: 2500 - total flux cleaned = -0.00249298 Jy ! Component: 2550 - total flux cleaned = -0.00247061 Jy ! Component: 2600 - total flux cleaned = -0.0024707 Jy ! Component: 2650 - total flux cleaned = -0.00244867 Jy ! Component: 2700 - total flux cleaned = -0.00242693 Jy ! Component: 2750 - total flux cleaned = -0.00238333 Jy ! Component: 2800 - total flux cleaned = -0.0022968 Jy ! Component: 2850 - total flux cleaned = -0.00225368 Jy ! Component: 2900 - total flux cleaned = -0.00216772 Jy ! Component: 2950 - total flux cleaned = -0.002125 Jy ! Component: 3000 - total flux cleaned = -0.00203993 Jy ! Component: 3050 - total flux cleaned = -0.0019765 Jy ! Component: 3100 - total flux cleaned = -0.00195542 Jy ! Component: 3150 - total flux cleaned = -0.00187144 Jy ! Component: 3200 - total flux cleaned = -0.00182962 Jy ! Component: 3250 - total flux cleaned = -0.00176696 Jy ! Component: 3300 - total flux cleaned = -0.00172545 Jy ! Component: 3350 - total flux cleaned = -0.00166336 Jy ! Component: 3400 - total flux cleaned = -0.0016427 Jy ! Component: 3450 - total flux cleaned = -0.00158091 Jy ! Component: 3500 - total flux cleaned = -0.0015808 Jy ! Component: 3550 - total flux cleaned = -0.00153982 Jy ! Component: 3600 - total flux cleaned = -0.00149892 Jy ! Component: 3650 - total flux cleaned = -0.00145815 Jy ! Component: 3700 - total flux cleaned = -0.0014581 Jy ! Component: 3750 - total flux cleaned = -0.00141757 Jy ! Component: 3800 - total flux cleaned = -0.001377 Jy ! Component: 3850 - total flux cleaned = -0.00137698 Jy ! Component: 3900 - total flux cleaned = -0.00129622 Jy ! Component: 3950 - total flux cleaned = -0.00125594 Jy ! Component: 4000 - total flux cleaned = -0.00121553 Jy ! Component: 4050 - total flux cleaned = -0.00115528 Jy ! Total flux subtracted in 4096 components = -0.00115531 Jy ! Clean residual min=-0.001071 max=0.001250 Jy/beam ! Clean residual mean=0.000001 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.405332 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 339 components and 0.405332 Jy ![Exited script file: muppet] wmap "J1648-3301_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.941 x 6.718 at -2.617 degrees (North through East) ! Clean map min=-0.0029787 max=0.30729 Jy/beam ! Writing clean map to FITS file: J1648-3301_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.307289 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000340678 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.332597 0.332597 0.665194 1.33039 2.66078 5.32156 10.6431 21.2862 42.5724 85.1449 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.307 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.941 x 6.718 at -2.617 degrees (North through East) ! Clean map min=-0.0029787 max=0.30729 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1648-3301_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:13:22 2019