! Started logfile: J1648+4104_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:45:22 2019 obs J1648+4104_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J1648+4104_S_2017_03_27_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.842871 visibilities/baseline/integration-bin. ! Found source: J1648+4104 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 17144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1648+4104_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 97 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 472 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.816930Jy sigma=0.007425 ! Fit after self-cal, rms=0.810290Jy sigma=0.007373 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=5.353 mas, bpa=-15.64 degrees ! Estimated noise=1010.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148762 Jy ! Component: 100 - total flux cleaned = 0.18218 Jy ! Total flux subtracted in 100 components = 0.18218 Jy ! Clean residual min=-0.005612 max=0.011584 Jy/beam ! Clean residual mean=0.000023 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.18218 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.18218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084822Jy sigma=0.000700 ! Fit after self-cal, rms=0.084823Jy sigma=0.000700 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120814 Jy ! Component: 100 - total flux cleaned = 0.01826 Jy ! Total flux subtracted in 100 components = 0.01826 Jy ! Clean residual min=-0.004935 max=0.007953 Jy/beam ! Clean residual mean=0.000017 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.20044 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.20044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082980Jy sigma=0.000680 ! Fit after self-cal, rms=0.082990Jy sigma=0.000680 ! Inverting map ! Added new window around map position (-7, 4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00670477 Jy ! Component: 100 - total flux cleaned = 0.010218 Jy ! Total flux subtracted in 100 components = 0.010218 Jy ! Clean residual min=-0.004042 max=0.003967 Jy/beam ! Clean residual mean=0.000013 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.210658 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.210658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082499Jy sigma=0.000675 ! Fit after self-cal, rms=0.082471Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=5.992 mas, bpa=-14.45 degrees ! Estimated noise=657.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293824 Jy ! Component: 100 - total flux cleaned = 0.00485044 Jy ! Component: 150 - total flux cleaned = 0.00616458 Jy ! Component: 200 - total flux cleaned = 0.00711184 Jy ! Total flux subtracted in 200 components = 0.00711184 Jy ! Clean residual min=-0.002546 max=0.002857 Jy/beam ! Clean residual mean=0.000025 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.21777 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.21777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082346Jy sigma=0.000673 ! Fit after self-cal, rms=0.082347Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.95 HN 1.00 KP 1.03 ! LA 1.00 MK 0.98 NL 0.98 OV 1.04 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.03 KP 0.99 ! LA 0.95 MK 0.96 NL 1.04 OV 1.05 ! PT 0.96 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.03 HN 1.01 KP 0.98 ! LA 1.01 MK 1.01 NL 1.00 OV 0.96 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.07 HN 1.03 KP 1.00* ! LA 1.00 MK 1.37 NL 1.00* OV 0.88 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.082347Jy sigma=0.000673 ! Fit after self-cal, rms=0.083273Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.687 mas, bmaj=6.017 mas, bpa=-14.29 degrees ! Estimated noise=659.203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100216 Jy ! Component: 100 - total flux cleaned = -0.00124893 Jy ! Component: 150 - total flux cleaned = -0.00129556 Jy ! Component: 200 - total flux cleaned = -0.0013589 Jy ! Total flux subtracted in 200 components = -0.0013589 Jy ! Clean residual min=-0.002305 max=0.002376 Jy/beam ! Clean residual mean=0.000014 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.216411 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.216411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083250Jy sigma=0.000664 ! Fit after self-cal, rms=0.083272Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083272Jy sigma=0.000664 ! Fit after self-cal, rms=0.085110Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.698 mas, bmaj=6.009 mas, bpa=-14.46 degrees ! Estimated noise=659.477 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000898908 Jy ! Component: 100 - total flux cleaned = -0.000922213 Jy ! Component: 150 - total flux cleaned = -0.000993442 Jy ! Component: 200 - total flux cleaned = -0.00104059 Jy ! Total flux subtracted in 200 components = -0.00104059 Jy ! Clean residual min=-0.002013 max=0.001741 Jy/beam ! Clean residual mean=0.000010 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.21537 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 0.21537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085095Jy sigma=0.000661 ! Fit after self-cal, rms=0.085149Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.59996e-05 Jy ! Component: 100 - total flux cleaned = -0.000103107 Jy ! Component: 150 - total flux cleaned = -0.0001394 Jy ! Component: 200 - total flux cleaned = -0.00016138 Jy ! Total flux subtracted in 200 components = -0.00016138 Jy ! Clean residual min=-0.002010 max=0.001728 Jy/beam ! Clean residual mean=0.000010 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.215209 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 0.215209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085144Jy sigma=0.000660 ! Fit after self-cal, rms=0.085143Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085143Jy sigma=0.000660 ! Fit after self-cal, rms=0.085488Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=6.01 mas, bpa=-14.37 degrees ! Estimated noise=659.571 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000492996 Jy ! Component: 100 - total flux cleaned = -0.000571337 Jy ! Component: 150 - total flux cleaned = -0.000584886 Jy ! Component: 200 - total flux cleaned = -0.000622643 Jy ! Total flux subtracted in 200 components = -0.000622643 Jy ! Clean residual min=-0.001969 max=0.001743 Jy/beam ! Clean residual mean=0.000010 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.214586 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 87 components and 0.214586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085480Jy sigma=0.000660 ! Fit after self-cal, rms=0.085486Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.62445e-05 Jy ! Component: 100 - total flux cleaned = -7.04015e-05 Jy ! Component: 150 - total flux cleaned = -9.21774e-05 Jy ! Component: 200 - total flux cleaned = -0.000112829 Jy ! Total flux subtracted in 200 components = -0.000112829 Jy ! Clean residual min=-0.001967 max=0.001742 Jy/beam ! Clean residual mean=0.000010 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.214474 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 92 components and 0.214474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085481Jy sigma=0.000660 ! Fit after self-cal, rms=0.085481Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085481Jy sigma=0.000660 ! Fit after self-cal, rms=0.085663Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.072 mas, bmaj=9.303 mas, bpa=-6.216 degrees ! Estimated noise=788.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023912 Jy ! Component: 100 - total flux cleaned = 0.000150011 Jy ! Component: 150 - total flux cleaned = 0.000112769 Jy ! Component: 200 - total flux cleaned = 0.000112882 Jy ! Total flux subtracted in 200 components = 0.000112882 Jy ! Clean residual min=-0.002115 max=0.002637 Jy/beam ! Clean residual mean=0.000018 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.214586 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 0.214586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085666Jy sigma=0.000660 ! Fit after self-cal, rms=0.085668Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18, 15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238136 Jy ! Component: 100 - total flux cleaned = 0.00315495 Jy ! Component: 150 - total flux cleaned = 0.00366559 Jy ! Component: 200 - total flux cleaned = 0.00392402 Jy ! Total flux subtracted in 200 components = 0.00392402 Jy ! Clean residual min=-0.001604 max=0.001595 Jy/beam ! Clean residual mean=0.000009 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.21851 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 140 components and 0.21851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085617Jy sigma=0.000660 ! Fit after self-cal, rms=0.085618Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=6.013 mas, bpa=-14.31 degrees ! Estimated noise=659.677 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.709 x 6.013 at -14.31 degrees (North through East) ! Clean map min=-0.0018056 max=0.19393 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=5.363 mas, bpa=-15.53 degrees ! Estimated noise=1016.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14943 Jy ! Component: 100 - total flux cleaned = 0.182748 Jy ! Component: 150 - total flux cleaned = 0.194319 Jy ! Component: 200 - total flux cleaned = 0.201143 Jy ! Total flux subtracted in 200 components = 0.201143 Jy ! Clean residual min=-0.003143 max=0.003530 Jy/beam ! Clean residual mean=0.000009 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.201143 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.201143 Jy ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=6.013 mas, bpa=-14.31 degrees ! Estimated noise=659.677 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00507374 Jy ! Component: 100 - total flux cleaned = 0.00811352 Jy ! Component: 150 - total flux cleaned = 0.0102195 Jy ! Component: 200 - total flux cleaned = 0.0115752 Jy ! Total flux subtracted in 200 components = 0.0115752 Jy ! Clean residual min=-0.001891 max=0.001739 Jy/beam ! Clean residual mean=0.000011 rms=0.000435 Jy/beam ! Combined flux in latest and established models = 0.212718 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 55 components and 0.212718 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.072 mas, bmaj=9.303 mas, bpa=-6.216 degrees ! Estimated noise=788.069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212315 Jy ! Component: 100 - total flux cleaned = 0.00365382 Jy ! Component: 150 - total flux cleaned = 0.00444379 Jy ! Component: 200 - total flux cleaned = 0.0050326 Jy ! Total flux subtracted in 200 components = 0.0050326 Jy ! Clean residual min=-0.001742 max=0.001596 Jy/beam ! Clean residual mean=0.000012 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.217751 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428421 Jy ! Component: 100 - total flux cleaned = 0.00079566 Jy ! Component: 150 - total flux cleaned = 0.00108723 Jy ! Component: 200 - total flux cleaned = 0.00136436 Jy ! Total flux subtracted in 200 components = 0.00136436 Jy ! Clean residual min=-0.001634 max=0.001470 Jy/beam ! Clean residual mean=0.000008 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.219115 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 120 components and 0.219115 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.709 mas, bmaj=6.013 mas, bpa=-14.31 degrees ! Estimated noise=659.677 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160735 Jy ! Component: 100 - total flux cleaned = -1.57052e-05 Jy ! Component: 150 - total flux cleaned = 0.000118418 Jy ! Component: 200 - total flux cleaned = 0.000238691 Jy ! Total flux subtracted in 200 components = 0.000238691 Jy ! Clean residual min=-0.001634 max=0.001542 Jy/beam ! Clean residual mean=0.000004 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.219353 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 0.219354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085557Jy sigma=0.000660 ! Fit after self-cal, rms=0.085547Jy sigma=0.000659 wmodel J1648+4104_S_2017_03_27_pus_map.mod ! Writing 142 model components to file: J1648+4104_S_2017_03_27_pus_map.mod wobs J1648+4104_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J1648+4104_S_2017_03_27_pus_uvs.fits wwins J1648+4104_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J1648+4104_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.6186e-05 Jy ! Component: 100 - total flux cleaned = -0.000252297 Jy ! Component: 150 - total flux cleaned = -0.00022672 Jy ! Component: 200 - total flux cleaned = -0.000323794 Jy ! Component: 250 - total flux cleaned = -0.000417052 Jy ! Component: 300 - total flux cleaned = -0.000530311 Jy ! Component: 350 - total flux cleaned = -0.000618244 Jy ! Component: 400 - total flux cleaned = -0.000725262 Jy ! Component: 450 - total flux cleaned = -0.000850186 Jy ! Component: 500 - total flux cleaned = -0.000890792 Jy ! Component: 550 - total flux cleaned = -0.000911277 Jy ! Component: 600 - total flux cleaned = -0.000990734 Jy ! Component: 650 - total flux cleaned = -0.00110706 Jy ! Component: 700 - total flux cleaned = -0.0011454 Jy ! Component: 750 - total flux cleaned = -0.00122066 Jy ! Component: 800 - total flux cleaned = -0.00131353 Jy ! Component: 850 - total flux cleaned = -0.00140506 Jy ! Component: 900 - total flux cleaned = -0.00142325 Jy ! Component: 950 - total flux cleaned = -0.0014591 Jy ! Component: 1000 - total flux cleaned = -0.00147713 Jy ! Component: 1050 - total flux cleaned = -0.00156428 Jy ! Component: 1100 - total flux cleaned = -0.00158113 Jy ! Component: 1150 - total flux cleaned = -0.00161525 Jy ! Component: 1200 - total flux cleaned = -0.0016152 Jy ! Component: 1250 - total flux cleaned = -0.00166502 Jy ! Component: 1300 - total flux cleaned = -0.00161517 Jy ! Component: 1350 - total flux cleaned = -0.00164792 Jy ! Component: 1400 - total flux cleaned = -0.00156663 Jy ! Component: 1450 - total flux cleaned = -0.00159885 Jy ! Component: 1500 - total flux cleaned = -0.00156683 Jy ! Component: 1550 - total flux cleaned = -0.00156716 Jy ! Component: 1600 - total flux cleaned = -0.0015516 Jy ! Component: 1650 - total flux cleaned = -0.00161346 Jy ! Component: 1700 - total flux cleaned = -0.00155225 Jy ! Component: 1750 - total flux cleaned = -0.00152188 Jy ! Component: 1800 - total flux cleaned = -0.00158204 Jy ! Component: 1850 - total flux cleaned = -0.00153718 Jy ! Component: 1900 - total flux cleaned = -0.00153737 Jy ! Component: 1950 - total flux cleaned = -0.00150813 Jy ! Component: 2000 - total flux cleaned = -0.00152263 Jy ! Component: 2050 - total flux cleaned = -0.00153718 Jy ! Component: 2100 - total flux cleaned = -0.00155145 Jy ! Component: 2150 - total flux cleaned = -0.00155143 Jy ! Component: 2200 - total flux cleaned = -0.00153732 Jy ! Component: 2250 - total flux cleaned = -0.00152316 Jy ! Component: 2300 - total flux cleaned = -0.0015648 Jy ! Component: 2350 - total flux cleaned = -0.0015512 Jy ! Component: 2400 - total flux cleaned = -0.00153754 Jy ! Component: 2450 - total flux cleaned = -0.00160551 Jy ! Component: 2500 - total flux cleaned = -0.00152445 Jy ! Component: 2550 - total flux cleaned = -0.00153798 Jy ! Component: 2600 - total flux cleaned = -0.00153809 Jy ! Component: 2650 - total flux cleaned = -0.00153809 Jy ! Component: 2700 - total flux cleaned = -0.00155123 Jy ! Component: 2750 - total flux cleaned = -0.00147314 Jy ! Component: 2800 - total flux cleaned = -0.00148626 Jy ! Component: 2850 - total flux cleaned = -0.00148611 Jy ! Component: 2900 - total flux cleaned = -0.00138385 Jy ! Component: 2950 - total flux cleaned = -0.00133318 Jy ! Component: 3000 - total flux cleaned = -0.001308 Jy ! Component: 3050 - total flux cleaned = -0.00122038 Jy ! Component: 3100 - total flux cleaned = -0.00123275 Jy ! Component: 3150 - total flux cleaned = -0.00110904 Jy ! Component: 3200 - total flux cleaned = -0.0010845 Jy ! Component: 3250 - total flux cleaned = -0.00107225 Jy ! Component: 3300 - total flux cleaned = -0.00102371 Jy ! Component: 3350 - total flux cleaned = -0.000939094 Jy ! Component: 3400 - total flux cleaned = -0.000903066 Jy ! Component: 3450 - total flux cleaned = -0.000879196 Jy ! Component: 3500 - total flux cleaned = -0.000807939 Jy ! Component: 3550 - total flux cleaned = -0.00078437 Jy ! Component: 3600 - total flux cleaned = -0.000807896 Jy ! Component: 3650 - total flux cleaned = -0.00077288 Jy ! Component: 3700 - total flux cleaned = -0.000703151 Jy ! Component: 3750 - total flux cleaned = -0.000656934 Jy ! Component: 3800 - total flux cleaned = -0.000656933 Jy ! Component: 3850 - total flux cleaned = -0.000588415 Jy ! Component: 3900 - total flux cleaned = -0.000577072 Jy ! Component: 3950 - total flux cleaned = -0.000599796 Jy ! Component: 4000 - total flux cleaned = -0.000565964 Jy ! Component: 4050 - total flux cleaned = -0.000521175 Jy ! Total flux subtracted in 4096 components = -0.0005435 Jy ! Clean residual min=-0.000681 max=0.000635 Jy/beam ! Clean residual mean=0.000002 rms=0.000203 Jy/beam ! Combined flux in latest and established models = 0.21881 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 411 components and 0.21881 Jy ![Exited script file: muppet] wmap "J1648+4104_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.709 x 6.013 at -14.31 degrees (North through East) ! Clean map min=-0.0014618 max=0.19403 Jy/beam ! Writing clean map to FITS file: J1648+4104_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.194033 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000201201 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.311082 0.311082 0.622163 1.24433 2.48865 4.97731 9.95462 19.9092 39.8185 79.6369 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.194 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.709 x 6.013 at -14.31 degrees (North through East) ! Clean map min=-0.0014618 max=0.19403 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1648+4104_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:45:27 2019