! Started logfile: J1647-2912_S_2017_10_21_pus_uvs.log on Sat May 11 21:02:27 2019 obs J1647-2912_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J1647-2912_S_2017_10_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.773671 visibilities/baseline/integration-bin. ! Found source: J1647-2912 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12812 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1647-2912_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 127 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 197 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 183 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 645 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921829Jy sigma=0.006698 ! Fit after self-cal, rms=0.891172Jy sigma=0.006464 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=12.5 mas, bpa=-19.68 degrees ! Estimated noise=1454.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.083259 Jy ! Component: 100 - total flux cleaned = 0.104829 Jy ! Total flux subtracted in 100 components = 0.104829 Jy ! Clean residual min=-0.007027 max=0.009456 Jy/beam ! Clean residual mean=0.000020 rms=0.002075 Jy/beam ! Combined flux in latest and established models = 0.104829 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.104829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110023Jy sigma=0.000732 ! Fit after self-cal, rms=0.110048Jy sigma=0.000731 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=14.97 mas, bpa=-18.91 degrees ! Estimated noise=1040.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159939 Jy ! Component: 100 - total flux cleaned = 0.0238121 Jy ! Component: 150 - total flux cleaned = 0.0282563 Jy ! Component: 200 - total flux cleaned = 0.0309343 Jy ! Total flux subtracted in 200 components = 0.0309343 Jy ! Clean residual min=-0.005046 max=0.007093 Jy/beam ! Clean residual mean=-0.000003 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.135763 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 69 components and 0.135763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107665Jy sigma=0.000716 ! Fit after self-cal, rms=0.107702Jy sigma=0.000715 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.55 FD 0.95 HN 0.98 KP 1.11 ! LA 0.99 MK 0.98 NL 0.92 OV 1.03 ! PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.02 KP 1.07 ! LA 0.95 MK 1.02 NL 1.06 OV 1.02 ! PT 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.71 KP 1.03 ! LA 0.75 MK 1.01 NL 1.13 OV 0.93 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 174 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.81 KP 1.00* ! LA 0.72 MK 1.00* NL 1.00* OV 1.00* ! PT 0.94 ! ! ! Fit before self-cal, rms=0.107702Jy sigma=0.000715 ! Fit after self-cal, rms=0.109545Jy sigma=0.000705 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=15.21 mas, bpa=-19.36 degrees ! Estimated noise=1051.83 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (21, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483662 Jy ! Component: 100 - total flux cleaned = 0.00727873 Jy ! Component: 150 - total flux cleaned = 0.00816255 Jy ! Component: 200 - total flux cleaned = 0.0083272 Jy ! Total flux subtracted in 200 components = 0.0083272 Jy ! Clean residual min=-0.003038 max=0.002765 Jy/beam ! Clean residual mean=0.000012 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.14409 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 119 components and 0.14409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109336Jy sigma=0.000703 ! Fit after self-cal, rms=0.109441Jy sigma=0.000703 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109441Jy sigma=0.000703 ! Fit after self-cal, rms=0.110134Jy sigma=0.000702 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.674 mas, bmaj=15.2 mas, bpa=-19.52 degrees ! Estimated noise=1047.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187662 Jy ! Component: 100 - total flux cleaned = 0.00236468 Jy ! Component: 150 - total flux cleaned = 0.00259134 Jy ! Component: 200 - total flux cleaned = 0.00279012 Jy ! Total flux subtracted in 200 components = 0.00279012 Jy ! Clean residual min=-0.002687 max=0.002188 Jy/beam ! Clean residual mean=0.000009 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 0.14688 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 166 components and 0.14688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110089Jy sigma=0.000702 ! Fit after self-cal, rms=0.110119Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000592894 Jy ! Component: 100 - total flux cleaned = 0.000811579 Jy ! Component: 150 - total flux cleaned = 0.000840756 Jy ! Component: 200 - total flux cleaned = 0.00091819 Jy ! Total flux subtracted in 200 components = 0.00091819 Jy ! Clean residual min=-0.002682 max=0.002117 Jy/beam ! Clean residual mean=0.000009 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.147798 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 180 components and 0.147798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110100Jy sigma=0.000701 ! Fit after self-cal, rms=0.110099Jy sigma=0.000701 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110099Jy sigma=0.000701 ! Fit after self-cal, rms=0.110084Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.679 mas, bmaj=15.2 mas, bpa=-19.56 degrees ! Estimated noise=1046.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000706853 Jy ! Component: 100 - total flux cleaned = 0.000901101 Jy ! Component: 150 - total flux cleaned = 0.000950579 Jy ! Component: 200 - total flux cleaned = 0.00101745 Jy ! Total flux subtracted in 200 components = 0.00101745 Jy ! Clean residual min=-0.002456 max=0.002081 Jy/beam ! Clean residual mean=0.000007 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.148816 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 192 components and 0.148816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110068Jy sigma=0.000701 ! Fit after self-cal, rms=0.110075Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271777 Jy ! Component: 100 - total flux cleaned = 0.000356021 Jy ! Component: 150 - total flux cleaned = 0.000395272 Jy ! Component: 200 - total flux cleaned = 0.000450398 Jy ! Total flux subtracted in 200 components = 0.000450398 Jy ! Clean residual min=-0.002439 max=0.002080 Jy/beam ! Clean residual mean=0.000008 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.149266 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 200 components and 0.149266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110066Jy sigma=0.000701 ! Fit after self-cal, rms=0.110064Jy sigma=0.000701 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110064Jy sigma=0.000701 ! Fit after self-cal, rms=0.110076Jy sigma=0.000701 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.049 mas, bmaj=28.48 mas, bpa=-9.573 degrees ! Estimated noise=1209.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403727 Jy ! Component: 100 - total flux cleaned = 0.0006437 Jy ! Component: 150 - total flux cleaned = 0.000738116 Jy ! Component: 200 - total flux cleaned = 0.000815021 Jy ! Total flux subtracted in 200 components = 0.000815021 Jy ! Clean residual min=-0.002208 max=0.002250 Jy/beam ! Clean residual mean=0.000009 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.150081 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 218 components and 0.150081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110073Jy sigma=0.000701 ! Fit after self-cal, rms=0.110073Jy sigma=0.000701 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.48045e-05 Jy ! Component: 100 - total flux cleaned = 0.000181743 Jy ! Component: 150 - total flux cleaned = 0.000251465 Jy ! Component: 200 - total flux cleaned = 0.000292541 Jy ! Total flux subtracted in 200 components = 0.000292541 Jy ! Clean residual min=-0.002165 max=0.002213 Jy/beam ! Clean residual mean=0.000009 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.150374 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 232 components and 0.150374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110072Jy sigma=0.000701 ! Fit after self-cal, rms=0.110071Jy sigma=0.000701 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=15.21 mas, bpa=-19.57 degrees ! Estimated noise=1046.7 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.683 x 15.21 at -19.57 degrees (North through East) ! Clean map min=-0.0024792 max=0.10832 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3 mas, bmaj=12.73 mas, bpa=-20.65 degrees ! Estimated noise=1482.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840413 Jy ! Component: 100 - total flux cleaned = 0.106445 Jy ! Component: 150 - total flux cleaned = 0.117221 Jy ! Component: 200 - total flux cleaned = 0.123247 Jy ! Total flux subtracted in 200 components = 0.123247 Jy ! Clean residual min=-0.004340 max=0.004275 Jy/beam ! Clean residual mean=0.000019 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 0.123247 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.123247 Jy ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=15.21 mas, bpa=-19.57 degrees ! Estimated noise=1046.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00658712 Jy ! Component: 100 - total flux cleaned = 0.0113048 Jy ! Component: 150 - total flux cleaned = 0.0148503 Jy ! Component: 200 - total flux cleaned = 0.0175845 Jy ! Total flux subtracted in 200 components = 0.0175845 Jy ! Clean residual min=-0.002939 max=0.002486 Jy/beam ! Clean residual mean=0.000010 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.140831 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 104 components and 0.140831 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.049 mas, bmaj=28.48 mas, bpa=-9.573 degrees ! Estimated noise=1209.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293164 Jy ! Component: 100 - total flux cleaned = 0.00495147 Jy ! Component: 150 - total flux cleaned = 0.00642132 Jy ! Component: 200 - total flux cleaned = 0.00739297 Jy ! Total flux subtracted in 200 components = 0.00739297 Jy ! Clean residual min=-0.002216 max=0.002260 Jy/beam ! Clean residual mean=0.000011 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.148224 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00039356 Jy ! Component: 100 - total flux cleaned = 0.000761025 Jy ! Component: 150 - total flux cleaned = 0.00105118 Jy ! Component: 200 - total flux cleaned = 0.00128099 Jy ! Total flux subtracted in 200 components = 0.00128099 Jy ! Clean residual min=-0.002210 max=0.002237 Jy/beam ! Clean residual mean=0.000010 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.149505 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 191 components and 0.149505 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=15.21 mas, bpa=-19.57 degrees ! Estimated noise=1046.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000126973 Jy ! Component: 100 - total flux cleaned = -9.3995e-05 Jy ! Component: 150 - total flux cleaned = -3.28176e-05 Jy ! Component: 200 - total flux cleaned = 2.38469e-05 Jy ! Total flux subtracted in 200 components = 2.38469e-05 Jy ! Clean residual min=-0.002572 max=0.002052 Jy/beam ! Clean residual mean=0.000007 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.149529 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 216 components and 0.149529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110101Jy sigma=0.000701 ! Fit after self-cal, rms=0.110089Jy sigma=0.000701 wmodel J1647-2912_S_2017_10_21_pus_map.mod ! Writing 216 model components to file: J1647-2912_S_2017_10_21_pus_map.mod wobs J1647-2912_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J1647-2912_S_2017_10_21_pus_uvs.fits wwins J1647-2912_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J1647-2912_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109316 Jy ! Component: 100 - total flux cleaned = -0.00166373 Jy ! Component: 150 - total flux cleaned = -0.00194597 Jy ! Component: 200 - total flux cleaned = -0.00224335 Jy ! Component: 250 - total flux cleaned = -0.0023392 Jy ! Component: 300 - total flux cleaned = -0.00234048 Jy ! Component: 350 - total flux cleaned = -0.00228361 Jy ! Component: 400 - total flux cleaned = -0.00231251 Jy ! Component: 450 - total flux cleaned = -0.0023127 Jy ! Component: 500 - total flux cleaned = -0.00233895 Jy ! Component: 550 - total flux cleaned = -0.00223851 Jy ! Component: 600 - total flux cleaned = -0.00221394 Jy ! Component: 650 - total flux cleaned = -0.00209528 Jy ! Component: 700 - total flux cleaned = -0.00200319 Jy ! Component: 750 - total flux cleaned = -0.00189061 Jy ! Component: 800 - total flux cleaned = -0.00180244 Jy ! Component: 850 - total flux cleaned = -0.00171697 Jy ! Component: 900 - total flux cleaned = -0.00161294 Jy ! Component: 950 - total flux cleaned = -0.00153177 Jy ! Component: 1000 - total flux cleaned = -0.00143177 Jy ! Component: 1050 - total flux cleaned = -0.00133365 Jy ! Component: 1100 - total flux cleaned = -0.00119939 Jy ! Component: 1150 - total flux cleaned = -0.00112409 Jy ! Component: 1200 - total flux cleaned = -0.00104999 Jy ! Component: 1250 - total flux cleaned = -0.000959209 Jy ! Component: 1300 - total flux cleaned = -0.000905705 Jy ! Component: 1350 - total flux cleaned = -0.000835375 Jy ! Component: 1400 - total flux cleaned = -0.000783343 Jy ! Component: 1450 - total flux cleaned = -0.000732116 Jy ! Component: 1500 - total flux cleaned = -0.00061408 Jy ! Component: 1550 - total flux cleaned = -0.000564186 Jy ! Component: 1600 - total flux cleaned = -0.000482003 Jy ! Component: 1650 - total flux cleaned = -0.000401171 Jy ! Component: 1700 - total flux cleaned = -0.000369165 Jy ! Component: 1750 - total flux cleaned = -0.00032171 Jy ! Component: 1800 - total flux cleaned = -0.000259411 Jy ! Component: 1850 - total flux cleaned = -0.000167226 Jy ! Component: 1900 - total flux cleaned = -9.14984e-05 Jy ! Component: 1950 - total flux cleaned = -3.16257e-05 Jy ! Component: 2000 - total flux cleaned = -1.98406e-06 Jy ! Component: 2050 - total flux cleaned = 4.20432e-05 Jy ! Component: 2100 - total flux cleaned = 8.54157e-05 Jy ! Component: 2150 - total flux cleaned = 9.97411e-05 Jy ! Component: 2200 - total flux cleaned = 0.000128111 Jy ! Component: 2250 - total flux cleaned = 0.000156125 Jy ! Component: 2300 - total flux cleaned = 0.000156134 Jy ! Component: 2350 - total flux cleaned = 0.000197515 Jy ! Component: 2400 - total flux cleaned = 0.000183855 Jy ! Component: 2450 - total flux cleaned = 0.000183804 Jy ! Component: 2500 - total flux cleaned = 0.00022396 Jy ! Component: 2550 - total flux cleaned = 0.000237169 Jy ! Component: 2600 - total flux cleaned = 0.000237117 Jy ! Component: 2650 - total flux cleaned = 0.000263303 Jy ! Component: 2700 - total flux cleaned = 0.000250629 Jy ! Component: 2750 - total flux cleaned = 0.000237876 Jy ! Component: 2800 - total flux cleaned = 0.000263392 Jy ! Component: 2850 - total flux cleaned = 0.000238109 Jy ! Component: 2900 - total flux cleaned = 0.000250728 Jy ! Component: 2950 - total flux cleaned = 0.000250897 Jy ! Component: 3000 - total flux cleaned = 0.000300494 Jy ! Component: 3050 - total flux cleaned = 0.000324953 Jy ! Component: 3100 - total flux cleaned = 0.00034942 Jy ! Component: 3150 - total flux cleaned = 0.000397955 Jy ! Component: 3200 - total flux cleaned = 0.000385872 Jy ! Component: 3250 - total flux cleaned = 0.00044602 Jy ! Component: 3300 - total flux cleaned = 0.000410241 Jy ! Component: 3350 - total flux cleaned = 0.000410284 Jy ! Component: 3400 - total flux cleaned = 0.000422068 Jy ! Component: 3450 - total flux cleaned = 0.000422057 Jy ! Component: 3500 - total flux cleaned = 0.000422078 Jy ! Component: 3550 - total flux cleaned = 0.000398804 Jy ! Component: 3600 - total flux cleaned = 0.000456678 Jy ! Component: 3650 - total flux cleaned = 0.000468191 Jy ! Component: 3700 - total flux cleaned = 0.000456677 Jy ! Component: 3750 - total flux cleaned = 0.000479529 Jy ! Component: 3800 - total flux cleaned = 0.000468321 Jy ! Component: 3850 - total flux cleaned = 0.000479621 Jy ! Component: 3900 - total flux cleaned = 0.000490893 Jy ! Component: 3950 - total flux cleaned = 0.000479752 Jy ! Component: 4000 - total flux cleaned = 0.000491014 Jy ! Component: 4050 - total flux cleaned = 0.000468767 Jy ! Total flux subtracted in 4096 components = 0.000490837 Jy ! Clean residual min=-0.000661 max=0.000647 Jy/beam ! Clean residual mean=-0.000004 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.15002 Jy keep ! Adding 257 model components to the UV plane model. ! The established model now contains 473 components and 0.15002 Jy ![Exited script file: muppet] wmap "J1647-2912_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.683 x 15.21 at -19.57 degrees (North through East) ! Clean map min=-0.0017066 max=0.10847 Jy/beam ! Writing clean map to FITS file: J1647-2912_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108472 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207393 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.573587 0.573587 1.14717 2.29435 4.5887 9.1774 18.3548 36.7096 73.4192 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.683 x 15.21 at -19.57 degrees (North through East) ! Clean map min=-0.0017066 max=0.10847 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1647-2912_S_2017_10_21_pus_uvs.log closed on Sat May 11 21:02:32 2019