! Started logfile: J1646+0042_S_2017_05_01_pus_uvs.log on Wed May 1 18:40:29 2019 obs J1646+0042_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J1646+0042_S_2017_05_01_pus_uva.fits ! AN table 1: 112 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.966071 visibilities/baseline/integration-bin. ! Found source: J1646+0042 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 19476 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1646+0042_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 583 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.910763Jy sigma=0.007559 ! Fit after self-cal, rms=0.902894Jy sigma=0.007503 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=6.882 mas, bpa=-3.693 degrees ! Estimated noise=996.624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.076995 Jy ! Component: 100 - total flux cleaned = 0.0938087 Jy ! Total flux subtracted in 100 components = 0.0938087 Jy ! Clean residual min=-0.004756 max=0.004716 Jy/beam ! Clean residual mean=0.000007 rms=0.001339 Jy/beam ! Combined flux in latest and established models = 0.0938087 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0938087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098644Jy sigma=0.000706 ! Fit after self-cal, rms=0.098636Jy sigma=0.000706 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.412 mas, bmaj=7.764 mas, bpa=-2.504 degrees ! Estimated noise=740.667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00512232 Jy ! Component: 100 - total flux cleaned = 0.00699213 Jy ! Component: 150 - total flux cleaned = 0.00792601 Jy ! Component: 200 - total flux cleaned = 0.00801043 Jy ! Total flux subtracted in 200 components = 0.00801043 Jy ! Clean residual min=-0.003510 max=0.002875 Jy/beam ! Clean residual mean=0.000005 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.101819 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 18 components and 0.101819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098269Jy sigma=0.000710 ! Fit after self-cal, rms=0.098288Jy sigma=0.000709 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.89 HN 1.05 KP 1.03 ! LA 1.03 MK 1.00 NL 1.00 OV 1.03 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 1.12 KP 0.97 ! LA 0.93 MK 0.92 NL 1.08 OV 1.04 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.09 KP 0.99 ! LA 0.98 MK 1.02 NL 1.04 OV 0.95 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 3.37 HN 0.95 KP 1.00* ! LA 1.00* MK 1.10 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.098288Jy sigma=0.000709 ! Fit after self-cal, rms=0.113393Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=7.747 mas, bpa=-1.982 degrees ! Estimated noise=757.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129317 Jy ! Component: 100 - total flux cleaned = 0.0013518 Jy ! Component: 150 - total flux cleaned = 0.00131466 Jy ! Component: 200 - total flux cleaned = 0.00131379 Jy ! Total flux subtracted in 200 components = 0.00131379 Jy ! Clean residual min=-0.002586 max=0.002595 Jy/beam ! Clean residual mean=-0.000006 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.103133 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 31 components and 0.103133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113189Jy sigma=0.000670 ! Fit after self-cal, rms=0.113651Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113651Jy sigma=0.000669 ! Fit after self-cal, rms=0.116311Jy sigma=0.000665 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=7.743 mas, bpa=-1.879 degrees ! Estimated noise=764.757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104577 Jy ! Component: 100 - total flux cleaned = 0.0010243 Jy ! Component: 150 - total flux cleaned = 0.000985564 Jy ! Component: 200 - total flux cleaned = 0.000932871 Jy ! Total flux subtracted in 200 components = 0.000932871 Jy ! Clean residual min=-0.002258 max=0.002367 Jy/beam ! Clean residual mean=-0.000001 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.104066 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.104066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116248Jy sigma=0.000665 ! Fit after self-cal, rms=0.116292Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.67003e-05 Jy ! Component: 100 - total flux cleaned = -4.66628e-05 Jy ! Component: 150 - total flux cleaned = -7.47868e-05 Jy ! Component: 200 - total flux cleaned = -0.000100066 Jy ! Total flux subtracted in 200 components = -0.000100066 Jy ! Clean residual min=-0.002223 max=0.002297 Jy/beam ! Clean residual mean=-0.000001 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.103966 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.103966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116277Jy sigma=0.000664 ! Fit after self-cal, rms=0.116276Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116276Jy sigma=0.000664 ! Fit after self-cal, rms=0.111349Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=7.748 mas, bpa=-1.827 degrees ! Estimated noise=768.006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000388786 Jy ! Component: 100 - total flux cleaned = 0.000389573 Jy ! Component: 150 - total flux cleaned = 0.000389349 Jy ! Component: 200 - total flux cleaned = 0.000372496 Jy ! Total flux subtracted in 200 components = 0.000372496 Jy ! Clean residual min=-0.002202 max=0.002024 Jy/beam ! Clean residual mean=0.000000 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.104338 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.104338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111334Jy sigma=0.000661 ! Fit after self-cal, rms=0.111289Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.93303e-05 Jy ! Component: 100 - total flux cleaned = -4.37468e-05 Jy ! Component: 150 - total flux cleaned = -6.44071e-05 Jy ! Component: 200 - total flux cleaned = -8.37989e-05 Jy ! Total flux subtracted in 200 components = -8.37989e-05 Jy ! Clean residual min=-0.002174 max=0.002029 Jy/beam ! Clean residual mean=0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.104254 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.104254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111284Jy sigma=0.000661 ! Fit after self-cal, rms=0.111284Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111284Jy sigma=0.000661 ! Fit after self-cal, rms=0.112140Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.752 mas, bmaj=12.13 mas, bpa=3.508 degrees ! Estimated noise=921.741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411201 Jy ! Component: 100 - total flux cleaned = 0.000515123 Jy ! Component: 150 - total flux cleaned = 0.000531481 Jy ! Component: 200 - total flux cleaned = 0.000531731 Jy ! Total flux subtracted in 200 components = 0.000531731 Jy ! Clean residual min=-0.002038 max=0.002049 Jy/beam ! Clean residual mean=0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.104786 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.104786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112134Jy sigma=0.000661 ! Fit after self-cal, rms=0.112135Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.86799e-05 Jy ! Component: 100 - total flux cleaned = 3.50193e-05 Jy ! Component: 150 - total flux cleaned = 3.474e-05 Jy ! Component: 200 - total flux cleaned = 3.04602e-05 Jy ! Total flux subtracted in 200 components = 3.04602e-05 Jy ! Clean residual min=-0.002036 max=0.002054 Jy/beam ! Clean residual mean=0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.104817 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 71 components and 0.104817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112133Jy sigma=0.000661 ! Fit after self-cal, rms=0.112133Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=7.747 mas, bpa=-1.743 degrees ! Estimated noise=771.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 7.747 at -1.743 degrees (North through East) ! Clean map min=-0.0021131 max=0.10383 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.826 mas, bmaj=6.875 mas, bpa=-3.076 degrees ! Estimated noise=1051.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0811947 Jy ! Component: 100 - total flux cleaned = 0.0989228 Jy ! Component: 150 - total flux cleaned = 0.103051 Jy ! Component: 200 - total flux cleaned = 0.104215 Jy ! Total flux subtracted in 200 components = 0.104215 Jy ! Clean residual min=-0.003081 max=0.003202 Jy/beam ! Clean residual mean=0.000002 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.104215 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.104215 Jy ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=7.747 mas, bpa=-1.743 degrees ! Estimated noise=771.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00049427 Jy ! Component: 100 - total flux cleaned = 0.00067503 Jy ! Component: 150 - total flux cleaned = 0.000678756 Jy ! Component: 200 - total flux cleaned = 0.000642724 Jy ! Total flux subtracted in 200 components = 0.000642724 Jy ! Clean residual min=-0.002198 max=0.002001 Jy/beam ! Clean residual mean=0.000000 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.104858 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.104858 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.752 mas, bmaj=12.13 mas, bpa=3.508 degrees ! Estimated noise=921.741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000131192 Jy ! Component: 100 - total flux cleaned = 8.25179e-05 Jy ! Component: 150 - total flux cleaned = 5.28878e-05 Jy ! Component: 200 - total flux cleaned = 3.58133e-05 Jy ! Total flux subtracted in 200 components = 3.58133e-05 Jy ! Clean residual min=-0.002010 max=0.002029 Jy/beam ! Clean residual mean=0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.104893 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.25228e-05 Jy ! Component: 100 - total flux cleaned = -4.20164e-05 Jy ! Component: 150 - total flux cleaned = -5.34122e-05 Jy ! Component: 200 - total flux cleaned = -6.40712e-05 Jy ! Total flux subtracted in 200 components = -6.40712e-05 Jy ! Clean residual min=-0.002016 max=0.002046 Jy/beam ! Clean residual mean=0.000000 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.104829 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.104829 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=7.747 mas, bpa=-1.743 degrees ! Estimated noise=771.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.92956e-05 Jy ! Component: 100 - total flux cleaned = -2.05009e-05 Jy ! Component: 150 - total flux cleaned = -3.34063e-05 Jy ! Component: 200 - total flux cleaned = -4.47578e-05 Jy ! Total flux subtracted in 200 components = -4.47578e-05 Jy ! Clean residual min=-0.002195 max=0.002002 Jy/beam ! Clean residual mean=0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.104785 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.104785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112134Jy sigma=0.000661 ! Fit after self-cal, rms=0.112125Jy sigma=0.000661 wmodel J1646+0042_S_2017_05_01_pus_map.mod ! Writing 54 model components to file: J1646+0042_S_2017_05_01_pus_map.mod wobs J1646+0042_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J1646+0042_S_2017_05_01_pus_uvs.fits wwins J1646+0042_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J1646+0042_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000562875 Jy ! Component: 100 - total flux cleaned = -0.000809242 Jy ! Component: 150 - total flux cleaned = -0.00100882 Jy ! Component: 200 - total flux cleaned = -0.000976801 Jy ! Component: 250 - total flux cleaned = -0.000976889 Jy ! Component: 300 - total flux cleaned = -0.000855535 Jy ! Component: 350 - total flux cleaned = -0.000796446 Jy ! Component: 400 - total flux cleaned = -0.000796612 Jy ! Component: 450 - total flux cleaned = -0.000824928 Jy ! Component: 500 - total flux cleaned = -0.000825199 Jy ! Component: 550 - total flux cleaned = -0.000907368 Jy ! Component: 600 - total flux cleaned = -0.000907457 Jy ! Component: 650 - total flux cleaned = -0.00103931 Jy ! Component: 700 - total flux cleaned = -0.00109091 Jy ! Component: 750 - total flux cleaned = -0.00114167 Jy ! Component: 800 - total flux cleaned = -0.00116658 Jy ! Component: 850 - total flux cleaned = -0.00119115 Jy ! Component: 900 - total flux cleaned = -0.00119114 Jy ! Component: 950 - total flux cleaned = -0.00121507 Jy ! Component: 1000 - total flux cleaned = -0.00121489 Jy ! Component: 1050 - total flux cleaned = -0.00121471 Jy ! Component: 1100 - total flux cleaned = -0.00119179 Jy ! Component: 1150 - total flux cleaned = -0.0012378 Jy ! Component: 1200 - total flux cleaned = -0.00130515 Jy ! Component: 1250 - total flux cleaned = -0.00134969 Jy ! Component: 1300 - total flux cleaned = -0.00132788 Jy ! Component: 1350 - total flux cleaned = -0.00143652 Jy ! Component: 1400 - total flux cleaned = -0.0015439 Jy ! Component: 1450 - total flux cleaned = -0.00165013 Jy ! Component: 1500 - total flux cleaned = -0.00171309 Jy ! Component: 1550 - total flux cleaned = -0.00179664 Jy ! Component: 1600 - total flux cleaned = -0.00189967 Jy ! Component: 1650 - total flux cleaned = -0.00196107 Jy ! Component: 1700 - total flux cleaned = -0.00208235 Jy ! Component: 1750 - total flux cleaned = -0.00218259 Jy ! Component: 1800 - total flux cleaned = -0.00222202 Jy ! Component: 1850 - total flux cleaned = -0.00224155 Jy ! Component: 1900 - total flux cleaned = -0.00239735 Jy ! Component: 1950 - total flux cleaned = -0.00243584 Jy ! Component: 2000 - total flux cleaned = -0.00255085 Jy ! Component: 2050 - total flux cleaned = -0.00256966 Jy ! Component: 2100 - total flux cleaned = -0.00272025 Jy ! Component: 2150 - total flux cleaned = -0.00275777 Jy ! Component: 2200 - total flux cleaned = -0.00286915 Jy ! Component: 2250 - total flux cleaned = -0.00299771 Jy ! Component: 2300 - total flux cleaned = -0.00310685 Jy ! Component: 2350 - total flux cleaned = -0.003143 Jy ! Component: 2400 - total flux cleaned = -0.00325032 Jy ! Component: 2450 - total flux cleaned = -0.00330352 Jy ! Component: 2500 - total flux cleaned = -0.00337394 Jy ! Component: 2550 - total flux cleaned = -0.00339137 Jy ! Component: 2600 - total flux cleaned = -0.00351308 Jy ! Component: 2650 - total flux cleaned = -0.00349577 Jy ! Component: 2700 - total flux cleaned = -0.00354703 Jy ! Component: 2750 - total flux cleaned = -0.00358115 Jy ! Component: 2800 - total flux cleaned = -0.00364884 Jy ! Component: 2850 - total flux cleaned = -0.00366556 Jy ! Component: 2900 - total flux cleaned = -0.00368225 Jy ! Component: 2950 - total flux cleaned = -0.0036989 Jy ! Component: 3000 - total flux cleaned = -0.0037647 Jy ! Component: 3050 - total flux cleaned = -0.00379733 Jy ! Component: 3100 - total flux cleaned = -0.00382944 Jy ! Component: 3150 - total flux cleaned = -0.00387786 Jy ! Component: 3200 - total flux cleaned = -0.00392558 Jy ! Component: 3250 - total flux cleaned = -0.00394152 Jy ! Component: 3300 - total flux cleaned = -0.00395716 Jy ! Component: 3350 - total flux cleaned = -0.00401974 Jy ! Component: 3400 - total flux cleaned = -0.0040975 Jy ! Component: 3450 - total flux cleaned = -0.00411303 Jy ! Component: 3500 - total flux cleaned = -0.00412845 Jy ! Component: 3550 - total flux cleaned = -0.0041742 Jy ! Component: 3600 - total flux cleaned = -0.00420458 Jy ! Component: 3650 - total flux cleaned = -0.00421972 Jy ! Component: 3700 - total flux cleaned = -0.00426456 Jy ! Component: 3750 - total flux cleaned = -0.00427934 Jy ! Component: 3800 - total flux cleaned = -0.0043236 Jy ! Component: 3850 - total flux cleaned = -0.00436767 Jy ! Component: 3900 - total flux cleaned = -0.00441147 Jy ! Component: 3950 - total flux cleaned = -0.00441149 Jy ! Component: 4000 - total flux cleaned = -0.00445497 Jy ! Component: 4050 - total flux cleaned = -0.00451249 Jy ! Total flux subtracted in 4096 components = -0.00452684 Jy ! Clean residual min=-0.000785 max=0.001137 Jy/beam ! Clean residual mean=-0.000002 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.100258 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 342 components and 0.100258 Jy ![Exited script file: muppet] wmap "J1646+0042_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 7.747 at -1.743 degrees (North through East) ! Clean map min=-0.0019569 max=0.10431 Jy/beam ! Writing clean map to FITS file: J1646+0042_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.104306 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000271614 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.781205 0.781205 1.56241 3.12482 6.24964 12.4993 24.9986 49.9971 99.9943 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.104 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 7.747 at -1.743 degrees (North through East) ! Clean map min=-0.0019569 max=0.10431 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1646+0042_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:40:34 2019