! Started logfile: J1643-0402_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:52:59 2019 obs J1643-0402_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J1643-0402_S_2017_05_31_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.946451 visibilities/baseline/integration-bin. ! Found source: J1643-0402 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 24532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1643-0402_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 109 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 663 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.866959Jy sigma=0.006815 ! Fit after self-cal, rms=0.846559Jy sigma=0.006692 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.63 mas, bmaj=7.541 mas, bpa=-6.362 degrees ! Estimated noise=977.235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.12772 Jy ! Component: 100 - total flux cleaned = 0.157165 Jy ! Total flux subtracted in 100 components = 0.157165 Jy ! Clean residual min=-0.008005 max=0.011342 Jy/beam ! Clean residual mean=0.000002 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 0.157166 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.157166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235493Jy sigma=0.000714 ! Fit after self-cal, rms=0.235452Jy sigma=0.000714 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.201 mas, bmaj=8.68 mas, bpa=-5.803 degrees ! Estimated noise=682.182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132481 Jy ! Component: 100 - total flux cleaned = 0.0191714 Jy ! Component: 150 - total flux cleaned = 0.0219798 Jy ! Component: 200 - total flux cleaned = 0.0219806 Jy ! Total flux subtracted in 200 components = 0.0219806 Jy ! Clean residual min=-0.005567 max=0.004940 Jy/beam ! Clean residual mean=0.000016 rms=0.001103 Jy/beam ! Combined flux in latest and established models = 0.179146 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 38 components and 0.179146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233335Jy sigma=0.000704 ! Fit after self-cal, rms=0.233334Jy sigma=0.000704 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 1.05 KP 1.03 ! LA 1.01 MK 1.00 NL 0.92 OV 1.02 ! PT 1.05 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.60 FD 0.93 HN 1.07 KP 1.00 ! LA 1.00 MK 0.97 NL 1.08 OV 1.06 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.12 FD 0.98 HN 1.05 KP 0.98 ! LA 0.99 MK 1.02 NL 1.00 OV 1.00 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.99 KP 0.67 ! LA 1.03 MK 1.17 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.233334Jy sigma=0.000704 ! Fit after self-cal, rms=0.113379Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=8.635 mas, bpa=-5.588 degrees ! Estimated noise=674.929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000786923 Jy ! Component: 100 - total flux cleaned = -0.000784213 Jy ! Component: 150 - total flux cleaned = -0.000699976 Jy ! Component: 200 - total flux cleaned = -0.000622594 Jy ! Total flux subtracted in 200 components = -0.000622594 Jy ! Clean residual min=-0.003899 max=0.003769 Jy/beam ! Clean residual mean=0.000012 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.178523 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 52 components and 0.178523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113270Jy sigma=0.000685 ! Fit after self-cal, rms=0.113227Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113227Jy sigma=0.000685 ! Fit after self-cal, rms=0.123747Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.237 mas, bmaj=8.661 mas, bpa=-5.516 degrees ! Estimated noise=677.285 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000520691 Jy ! Component: 100 - total flux cleaned = 0.000503294 Jy ! Component: 150 - total flux cleaned = 0.000529086 Jy ! Component: 200 - total flux cleaned = 0.000563805 Jy ! Total flux subtracted in 200 components = 0.000563805 Jy ! Clean residual min=-0.001714 max=0.001673 Jy/beam ! Clean residual mean=0.000003 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.179087 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.179087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123732Jy sigma=0.000673 ! Fit after self-cal, rms=0.123931Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.10865e-05 Jy ! Component: 100 - total flux cleaned = 9.31922e-05 Jy ! Component: 150 - total flux cleaned = 0.000114738 Jy ! Component: 200 - total flux cleaned = 0.000124596 Jy ! Total flux subtracted in 200 components = 0.000124596 Jy ! Clean residual min=-0.001717 max=0.001655 Jy/beam ! Clean residual mean=0.000003 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.179212 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 64 components and 0.179212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123923Jy sigma=0.000673 ! Fit after self-cal, rms=0.123928Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123928Jy sigma=0.000673 ! Fit after self-cal, rms=0.143759Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=8.658 mas, bpa=-5.463 degrees ! Estimated noise=678.445 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403473 Jy ! Component: 100 - total flux cleaned = 0.000486674 Jy ! Component: 150 - total flux cleaned = 0.00050913 Jy ! Component: 200 - total flux cleaned = 0.000524588 Jy ! Total flux subtracted in 200 components = 0.000524588 Jy ! Clean residual min=-0.001511 max=0.001651 Jy/beam ! Clean residual mean=0.000002 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.179736 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.179736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143756Jy sigma=0.000673 ! Fit after self-cal, rms=0.143855Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.84116e-05 Jy ! Component: 100 - total flux cleaned = 5.96117e-05 Jy ! Component: 150 - total flux cleaned = 6.4465e-05 Jy ! Component: 200 - total flux cleaned = 6.89994e-05 Jy ! Total flux subtracted in 200 components = 6.89994e-05 Jy ! Clean residual min=-0.001523 max=0.001669 Jy/beam ! Clean residual mean=0.000002 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.179805 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 71 components and 0.179805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143855Jy sigma=0.000673 ! Fit after self-cal, rms=0.143857Jy sigma=0.000673 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143857Jy sigma=0.000673 ! Fit after self-cal, rms=0.144093Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.869 mas, bmaj=14.8 mas, bpa=-3.64 degrees ! Estimated noise=844.505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441049 Jy ! Component: 100 - total flux cleaned = 0.000440637 Jy ! Component: 150 - total flux cleaned = 0.000429903 Jy ! Component: 200 - total flux cleaned = 0.000424941 Jy ! Total flux subtracted in 200 components = 0.000424941 Jy ! Clean residual min=-0.001714 max=0.001912 Jy/beam ! Clean residual mean=0.000003 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.18023 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 78 components and 0.18023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144090Jy sigma=0.000673 ! Fit after self-cal, rms=0.144095Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.77781e-05 Jy ! Component: 100 - total flux cleaned = 2.12239e-05 Jy ! Component: 150 - total flux cleaned = 2.06222e-05 Jy ! Component: 200 - total flux cleaned = 1.20283e-05 Jy ! Total flux subtracted in 200 components = 1.20283e-05 Jy ! Clean residual min=-0.001710 max=0.001916 Jy/beam ! Clean residual mean=0.000003 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.180242 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 80 components and 0.180242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144094Jy sigma=0.000673 ! Fit after self-cal, rms=0.144097Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.647 mas, bpa=-5.422 degrees ! Estimated noise=679.167 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.232 x 8.647 at -5.422 degrees (North through East) ! Clean map min=-0.0014449 max=0.16369 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=7.519 mas, bpa=-6.381 degrees ! Estimated noise=965.258 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.126125 Jy ! Component: 100 - total flux cleaned = 0.154317 Jy ! Component: 150 - total flux cleaned = 0.164954 Jy ! Component: 200 - total flux cleaned = 0.170633 Jy ! Total flux subtracted in 200 components = 0.170633 Jy ! Clean residual min=-0.002584 max=0.002837 Jy/beam ! Clean residual mean=-0.000002 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.170633 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.170633 Jy ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.647 mas, bpa=-5.422 degrees ! Estimated noise=679.167 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458248 Jy ! Component: 100 - total flux cleaned = 0.00693192 Jy ! Component: 150 - total flux cleaned = 0.00820411 Jy ! Component: 200 - total flux cleaned = 0.00890757 Jy ! Total flux subtracted in 200 components = 0.00890757 Jy ! Clean residual min=-0.001502 max=0.001586 Jy/beam ! Clean residual mean=0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.17954 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 54 components and 0.17954 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.869 mas, bmaj=14.8 mas, bpa=-3.64 degrees ! Estimated noise=844.505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490541 Jy ! Component: 100 - total flux cleaned = 0.000526596 Jy ! Component: 150 - total flux cleaned = 0.00053159 Jy ! Component: 200 - total flux cleaned = 0.00053657 Jy ! Total flux subtracted in 200 components = 0.00053657 Jy ! Clean residual min=-0.001708 max=0.001901 Jy/beam ! Clean residual mean=0.000003 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.180077 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.30485e-06 Jy ! Component: 100 - total flux cleaned = 2.23239e-05 Jy ! Component: 150 - total flux cleaned = 3.04396e-05 Jy ! Component: 200 - total flux cleaned = 4.1884e-05 Jy ! Total flux subtracted in 200 components = 4.1884e-05 Jy ! Clean residual min=-0.001706 max=0.001908 Jy/beam ! Clean residual mean=0.000003 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.180119 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 60 components and 0.180119 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.647 mas, bpa=-5.422 degrees ! Estimated noise=679.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.08658e-05 Jy ! Component: 100 - total flux cleaned = 5.38562e-05 Jy ! Component: 150 - total flux cleaned = 9.17741e-05 Jy ! Component: 200 - total flux cleaned = 0.000123935 Jy ! Total flux subtracted in 200 components = 0.000123935 Jy ! Clean residual min=-0.001513 max=0.001671 Jy/beam ! Clean residual mean=0.000002 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.180243 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.180243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144097Jy sigma=0.000673 ! Fit after self-cal, rms=0.144112Jy sigma=0.000673 wmodel J1643-0402_S_2017_05_31_pus_map.mod ! Writing 68 model components to file: J1643-0402_S_2017_05_31_pus_map.mod wobs J1643-0402_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J1643-0402_S_2017_05_31_pus_uvs.fits wwins J1643-0402_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J1643-0402_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485482 Jy ! Component: 100 - total flux cleaned = 0.00051538 Jy ! Component: 150 - total flux cleaned = 0.000488039 Jy ! Component: 200 - total flux cleaned = 0.000461787 Jy ! Component: 250 - total flux cleaned = 0.000511434 Jy ! Component: 300 - total flux cleaned = 0.000486782 Jy ! Component: 350 - total flux cleaned = 0.000511231 Jy ! Component: 400 - total flux cleaned = 0.000581327 Jy ! Component: 450 - total flux cleaned = 0.000581335 Jy ! Component: 500 - total flux cleaned = 0.000649188 Jy ! Component: 550 - total flux cleaned = 0.000693171 Jy ! Component: 600 - total flux cleaned = 0.000671399 Jy ! Component: 650 - total flux cleaned = 0.00069292 Jy ! Component: 700 - total flux cleaned = 0.000650858 Jy ! Component: 750 - total flux cleaned = 0.000692382 Jy ! Component: 800 - total flux cleaned = 0.00063094 Jy ! Component: 850 - total flux cleaned = 0.000590566 Jy ! Component: 900 - total flux cleaned = 0.000590635 Jy ! Component: 950 - total flux cleaned = 0.000531387 Jy ! Component: 1000 - total flux cleaned = 0.000492622 Jy ! Component: 1050 - total flux cleaned = 0.000396447 Jy ! Component: 1100 - total flux cleaned = 0.000339418 Jy ! Component: 1150 - total flux cleaned = 0.000320812 Jy ! Component: 1200 - total flux cleaned = 0.000283646 Jy ! Component: 1250 - total flux cleaned = 0.000191762 Jy ! Component: 1300 - total flux cleaned = 0.000228566 Jy ! Component: 1350 - total flux cleaned = 0.000246716 Jy ! Component: 1400 - total flux cleaned = 0.000174707 Jy ! Component: 1450 - total flux cleaned = 0.000138974 Jy ! Component: 1500 - total flux cleaned = 0.000138947 Jy ! Component: 1550 - total flux cleaned = 0.000121235 Jy ! Component: 1600 - total flux cleaned = 0.000103819 Jy ! Component: 1650 - total flux cleaned = 0.000103758 Jy ! Component: 1700 - total flux cleaned = 0.000120752 Jy ! Component: 1750 - total flux cleaned = 0.000137468 Jy ! Component: 1800 - total flux cleaned = 0.000137462 Jy ! Component: 1850 - total flux cleaned = 0.000137464 Jy ! Component: 1900 - total flux cleaned = 0.000154051 Jy ! Component: 1950 - total flux cleaned = 0.000219453 Jy ! Component: 2000 - total flux cleaned = 0.00031663 Jy ! Component: 2050 - total flux cleaned = 0.000348564 Jy ! Component: 2100 - total flux cleaned = 0.000364445 Jy ! Component: 2150 - total flux cleaned = 0.000380289 Jy ! Component: 2200 - total flux cleaned = 0.000427601 Jy ! Component: 2250 - total flux cleaned = 0.00045877 Jy ! Component: 2300 - total flux cleaned = 0.00045874 Jy ! Component: 2350 - total flux cleaned = 0.000489641 Jy ! Component: 2400 - total flux cleaned = 0.00050507 Jy ! Component: 2450 - total flux cleaned = 0.000596461 Jy ! Component: 2500 - total flux cleaned = 0.000596495 Jy ! Component: 2550 - total flux cleaned = 0.000611358 Jy ! Component: 2600 - total flux cleaned = 0.000596387 Jy ! Component: 2650 - total flux cleaned = 0.000640765 Jy ! Component: 2700 - total flux cleaned = 0.000655571 Jy ! Component: 2750 - total flux cleaned = 0.000699436 Jy ! Component: 2800 - total flux cleaned = 0.00075768 Jy ! Component: 2850 - total flux cleaned = 0.000772201 Jy ! Component: 2900 - total flux cleaned = 0.000743457 Jy ! Component: 2950 - total flux cleaned = 0.000757807 Jy ! Component: 3000 - total flux cleaned = 0.000786223 Jy ! Component: 3050 - total flux cleaned = 0.000828531 Jy ! Component: 3100 - total flux cleaned = 0.000800395 Jy ! Component: 3150 - total flux cleaned = 0.000814277 Jy ! Component: 3200 - total flux cleaned = 0.000828138 Jy ! Component: 3250 - total flux cleaned = 0.000786757 Jy ! Component: 3300 - total flux cleaned = 0.000800473 Jy ! Component: 3350 - total flux cleaned = 0.000827751 Jy ! Component: 3400 - total flux cleaned = 0.000827897 Jy ! Component: 3450 - total flux cleaned = 0.000895337 Jy ! Component: 3500 - total flux cleaned = 0.000881912 Jy ! Component: 3550 - total flux cleaned = 0.000908598 Jy ! Component: 3600 - total flux cleaned = 0.000935252 Jy ! Component: 3650 - total flux cleaned = 0.000961666 Jy ! Component: 3700 - total flux cleaned = 0.000961708 Jy ! Component: 3750 - total flux cleaned = 0.000935715 Jy ! Component: 3800 - total flux cleaned = 0.00100093 Jy ! Component: 3850 - total flux cleaned = 0.00101377 Jy ! Component: 3900 - total flux cleaned = 0.00102671 Jy ! Component: 3950 - total flux cleaned = 0.00107798 Jy ! Component: 4000 - total flux cleaned = 0.00109081 Jy ! Component: 4050 - total flux cleaned = 0.00111618 Jy ! Total flux subtracted in 4096 components = 0.00115407 Jy ! Clean residual min=-0.000712 max=0.000776 Jy/beam ! Clean residual mean=0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.181397 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 379 components and 0.181397 Jy ![Exited script file: muppet] wmap "J1643-0402_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.232 x 8.647 at -5.422 degrees (North through East) ! Clean map min=-0.0012856 max=0.16361 Jy/beam ! Writing clean map to FITS file: J1643-0402_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.163608 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000238345 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.437041 0.437041 0.874082 1.74816 3.49633 6.99266 13.9853 27.9706 55.9413 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.163 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.232 x 8.647 at -5.422 degrees (North through East) ! Clean map min=-0.0012856 max=0.16361 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1643-0402_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:53:05 2019