! Started logfile: J1641+2257_S_2017_09_26_pus_uvs.log on Sat May 11 13:03:12 2019 obs J1641+2257_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J1641+2257_S_2017_09_26_pus_uva.fits ! AN table 1: 26 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.791667 visibilities/baseline/integration-bin. ! Found source: J1641+2257 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 2964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1641+2257_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.555928Jy sigma=0.004961 ! Fit after self-cal, rms=0.551614Jy sigma=0.004915 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=10.03 mas, bpa=-9.924 degrees ! Estimated noise=2026.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.366013 Jy ! Component: 100 - total flux cleaned = 0.445827 Jy ! Total flux subtracted in 100 components = 0.445827 Jy ! Clean residual min=-0.027954 max=0.034581 Jy/beam ! Clean residual mean=0.000024 rms=0.007504 Jy/beam ! Combined flux in latest and established models = 0.445827 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.445827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149111Jy sigma=0.001238 ! Fit after self-cal, rms=0.149106Jy sigma=0.001238 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.44 mas, bmaj=11.2 mas, bpa=-10.41 degrees ! Estimated noise=1691.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154946 Jy ! Component: 100 - total flux cleaned = 0.0172036 Jy ! Component: 150 - total flux cleaned = 0.0188208 Jy ! Component: 200 - total flux cleaned = 0.0197858 Jy ! Total flux subtracted in 200 components = 0.0197858 Jy ! Clean residual min=-0.026282 max=0.028854 Jy/beam ! Clean residual mean=0.000116 rms=0.006115 Jy/beam ! Combined flux in latest and established models = 0.465613 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.465613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146433Jy sigma=0.001207 ! Fit after self-cal, rms=0.146422Jy sigma=0.001207 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.86 HN 0.94 KP 1.04 ! LA 1.01 MK 1.04 NL 0.89 OV 0.94 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.99 KP 0.98 ! LA 0.96 MK 0.98 NL 1.04 OV 1.31 ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.90 HN 0.98 KP 0.97 ! LA 0.98 MK 1.00 NL 1.01 OV 0.96 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.96 KP 1.00* ! LA 1.73 MK 1.01 NL 1.00* OV 3.51 ! PT 0.97 ! ! ! Fit before self-cal, rms=0.146422Jy sigma=0.001207 ! Fit after self-cal, rms=0.161785Jy sigma=0.000980 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.44 mas, bmaj=11.22 mas, bpa=-10.63 degrees ! Estimated noise=1681.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00533446 Jy ! Component: 100 - total flux cleaned = -0.00584285 Jy ! Component: 150 - total flux cleaned = -0.00584432 Jy ! Component: 200 - total flux cleaned = -0.00558515 Jy ! Total flux subtracted in 200 components = -0.00558515 Jy ! Clean residual min=-0.018394 max=0.020218 Jy/beam ! Clean residual mean=0.000105 rms=0.004885 Jy/beam ! Combined flux in latest and established models = 0.460028 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.460028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161491Jy sigma=0.000979 ! Fit after self-cal, rms=0.161913Jy sigma=0.000978 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161913Jy sigma=0.000978 ! Fit after self-cal, rms=0.133437Jy sigma=0.000651 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.44 mas, bmaj=11.14 mas, bpa=-10.7 degrees ! Estimated noise=1677.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483701 Jy ! Component: 100 - total flux cleaned = 0.00588312 Jy ! Component: 150 - total flux cleaned = 0.00577282 Jy ! Component: 200 - total flux cleaned = 0.00557413 Jy ! Total flux subtracted in 200 components = 0.00557413 Jy ! Clean residual min=-0.004408 max=0.004099 Jy/beam ! Clean residual mean=0.000010 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.465602 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.465602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133180Jy sigma=0.000649 ! Fit after self-cal, rms=0.133882Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134461 Jy ! Component: 100 - total flux cleaned = -0.000327085 Jy ! Component: 150 - total flux cleaned = -0.000397114 Jy ! Component: 200 - total flux cleaned = -0.000461047 Jy ! Total flux subtracted in 200 components = -0.000461047 Jy ! Clean residual min=-0.004273 max=0.004056 Jy/beam ! Clean residual mean=0.000010 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.465141 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.465141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133858Jy sigma=0.000648 ! Fit after self-cal, rms=0.133855Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133855Jy sigma=0.000648 ! Fit after self-cal, rms=0.134370Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.426 mas, bmaj=11.14 mas, bpa=-10.72 degrees ! Estimated noise=1675.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208885 Jy ! Component: 100 - total flux cleaned = 0.00263892 Jy ! Component: 150 - total flux cleaned = 0.00257217 Jy ! Component: 200 - total flux cleaned = 0.00249775 Jy ! Total flux subtracted in 200 components = 0.00249775 Jy ! Clean residual min=-0.004156 max=0.003824 Jy/beam ! Clean residual mean=0.000008 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.467639 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 39 components and 0.467639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134291Jy sigma=0.000647 ! Fit after self-cal, rms=0.134300Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.39547e-05 Jy ! Component: 100 - total flux cleaned = -6.60221e-05 Jy ! Component: 150 - total flux cleaned = -0.000111065 Jy ! Component: 200 - total flux cleaned = -0.000152456 Jy ! Total flux subtracted in 200 components = -0.000152456 Jy ! Clean residual min=-0.004147 max=0.003825 Jy/beam ! Clean residual mean=0.000008 rms=0.001044 Jy/beam ! Combined flux in latest and established models = 0.467486 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 42 components and 0.467486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134296Jy sigma=0.000647 ! Fit after self-cal, rms=0.134296Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134296Jy sigma=0.000647 ! Fit after self-cal, rms=0.134455Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.458 mas, bmaj=11.77 mas, bpa=-18.47 degrees ! Estimated noise=1910.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000713535 Jy ! Component: 100 - total flux cleaned = 0.000813135 Jy ! Component: 150 - total flux cleaned = 0.00088477 Jy ! Component: 200 - total flux cleaned = 0.00090749 Jy ! Total flux subtracted in 200 components = 0.00090749 Jy ! Clean residual min=-0.004353 max=0.004201 Jy/beam ! Clean residual mean=0.000013 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.468394 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.468394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134436Jy sigma=0.000647 ! Fit after self-cal, rms=0.134435Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.06963e-05 Jy ! Component: 100 - total flux cleaned = -3.16299e-05 Jy ! Component: 150 - total flux cleaned = -5.15935e-05 Jy ! Component: 200 - total flux cleaned = -6.10122e-05 Jy ! Total flux subtracted in 200 components = -6.10122e-05 Jy ! Clean residual min=-0.004369 max=0.004208 Jy/beam ! Clean residual mean=0.000013 rms=0.001162 Jy/beam ! Combined flux in latest and established models = 0.468333 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.468333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134439Jy sigma=0.000647 ! Fit after self-cal, rms=0.134440Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.42 mas, bmaj=11.14 mas, bpa=-10.74 degrees ! Estimated noise=1675.71 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.42 x 11.14 at -10.74 degrees (North through East) ! Clean map min=-0.0041224 max=0.46652 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=9.984 mas, bpa=-10.26 degrees ! Estimated noise=2018.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.364499 Jy ! Component: 100 - total flux cleaned = 0.443983 Jy ! Component: 150 - total flux cleaned = 0.461326 Jy ! Component: 200 - total flux cleaned = 0.465466 Jy ! Total flux subtracted in 200 components = 0.465466 Jy ! Clean residual min=-0.005878 max=0.004642 Jy/beam ! Clean residual mean=0.000005 rms=0.001334 Jy/beam ! Combined flux in latest and established models = 0.465466 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.465466 Jy ! Inverting map and beam ! Estimated beam: bmin=4.42 mas, bmaj=11.14 mas, bpa=-10.74 degrees ! Estimated noise=1675.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198724 Jy ! Component: 100 - total flux cleaned = 0.00219625 Jy ! Component: 150 - total flux cleaned = 0.0022405 Jy ! Component: 200 - total flux cleaned = 0.00220262 Jy ! Total flux subtracted in 200 components = 0.00220262 Jy ! Clean residual min=-0.004393 max=0.003891 Jy/beam ! Clean residual mean=0.000007 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 0.467668 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 0.467668 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.458 mas, bmaj=11.77 mas, bpa=-18.47 degrees ! Estimated noise=1910.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.27646e-05 Jy ! Component: 100 - total flux cleaned = 4.20225e-05 Jy ! Component: 150 - total flux cleaned = 1.78558e-05 Jy ! Component: 200 - total flux cleaned = -4.44326e-06 Jy ! Total flux subtracted in 200 components = -4.44326e-06 Jy ! Clean residual min=-0.004582 max=0.004198 Jy/beam ! Clean residual mean=0.000013 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.467664 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.93658e-07 Jy ! Component: 100 - total flux cleaned = -2.24493e-05 Jy ! Component: 150 - total flux cleaned = -6.26941e-05 Jy ! Component: 200 - total flux cleaned = -8.24808e-05 Jy ! Total flux subtracted in 200 components = -8.24808e-05 Jy ! Clean residual min=-0.004542 max=0.004169 Jy/beam ! Clean residual mean=0.000013 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.467581 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.467581 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.42 mas, bmaj=11.14 mas, bpa=-10.74 degrees ! Estimated noise=1675.71 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000110621 Jy ! Component: 100 - total flux cleaned = 7.59051e-05 Jy ! Component: 150 - total flux cleaned = 4.61417e-05 Jy ! Component: 200 - total flux cleaned = -1.04572e-05 Jy ! Total flux subtracted in 200 components = -1.04572e-05 Jy ! Clean residual min=-0.004261 max=0.003877 Jy/beam ! Clean residual mean=0.000007 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.467571 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.467571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134435Jy sigma=0.000647 ! Fit after self-cal, rms=0.134436Jy sigma=0.000647 wmodel J1641+2257_S_2017_09_26_pus_map.mod ! Writing 50 model components to file: J1641+2257_S_2017_09_26_pus_map.mod wobs J1641+2257_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J1641+2257_S_2017_09_26_pus_uvs.fits wwins J1641+2257_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J1641+2257_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122701 Jy ! Component: 100 - total flux cleaned = -0.00218142 Jy ! Component: 150 - total flux cleaned = -0.00300881 Jy ! Component: 200 - total flux cleaned = -0.00324926 Jy ! Component: 250 - total flux cleaned = -0.00313565 Jy ! Component: 300 - total flux cleaned = -0.00313508 Jy ! Component: 350 - total flux cleaned = -0.0030821 Jy ! Component: 400 - total flux cleaned = -0.00283126 Jy ! Component: 450 - total flux cleaned = -0.00254166 Jy ! Component: 500 - total flux cleaned = -0.00226196 Jy ! Component: 550 - total flux cleaned = -0.00208156 Jy ! Component: 600 - total flux cleaned = -0.00181726 Jy ! Component: 650 - total flux cleaned = -0.00156029 Jy ! Component: 700 - total flux cleaned = -0.00135168 Jy ! Component: 750 - total flux cleaned = -0.00122895 Jy ! Component: 800 - total flux cleaned = -0.000990357 Jy ! Component: 850 - total flux cleaned = -0.00091292 Jy ! Component: 900 - total flux cleaned = -0.000761093 Jy ! Component: 950 - total flux cleaned = -0.000650029 Jy ! Component: 1000 - total flux cleaned = -0.000505158 Jy ! Component: 1050 - total flux cleaned = -0.000329409 Jy ! Component: 1100 - total flux cleaned = -0.000122586 Jy ! Component: 1150 - total flux cleaned = 1.24634e-05 Jy ! Component: 1200 - total flux cleaned = 0.00017828 Jy ! Component: 1250 - total flux cleaned = 0.000308221 Jy ! Component: 1300 - total flux cleaned = 0.000308152 Jy ! Component: 1350 - total flux cleaned = 0.000339336 Jy ! Component: 1400 - total flux cleaned = 0.000401226 Jy ! Component: 1450 - total flux cleaned = 0.000309242 Jy ! Component: 1500 - total flux cleaned = 0.000369603 Jy ! Component: 1550 - total flux cleaned = 0.000399684 Jy ! Component: 1600 - total flux cleaned = 0.00042933 Jy ! Component: 1650 - total flux cleaned = 0.000515541 Jy ! Component: 1700 - total flux cleaned = 0.000430042 Jy ! Component: 1750 - total flux cleaned = 0.00048668 Jy ! Component: 1800 - total flux cleaned = 0.000458437 Jy ! Component: 1850 - total flux cleaned = 0.000430928 Jy ! Component: 1900 - total flux cleaned = 0.000376657 Jy ! Component: 1950 - total flux cleaned = 0.000430229 Jy ! Component: 2000 - total flux cleaned = 0.000483649 Jy ! Component: 2050 - total flux cleaned = 0.000510037 Jy ! Component: 2100 - total flux cleaned = 0.000562118 Jy ! Component: 2150 - total flux cleaned = 0.000561971 Jy ! Component: 2200 - total flux cleaned = 0.000460707 Jy ! Component: 2250 - total flux cleaned = 0.000561877 Jy ! Component: 2300 - total flux cleaned = 0.000511641 Jy ! Component: 2350 - total flux cleaned = 0.000536241 Jy ! Component: 2400 - total flux cleaned = 0.000511727 Jy ! Component: 2450 - total flux cleaned = 0.000487431 Jy ! Component: 2500 - total flux cleaned = 0.000535438 Jy ! Component: 2550 - total flux cleaned = 0.000487559 Jy ! Component: 2600 - total flux cleaned = 0.000440151 Jy ! Component: 2650 - total flux cleaned = 0.000510924 Jy ! Component: 2700 - total flux cleaned = 0.000511015 Jy ! Component: 2750 - total flux cleaned = 0.000534232 Jy ! Component: 2800 - total flux cleaned = 0.000557509 Jy ! Component: 2850 - total flux cleaned = 0.000626222 Jy ! Component: 2900 - total flux cleaned = 0.000671765 Jy ! Component: 2950 - total flux cleaned = 0.000762306 Jy ! Component: 3000 - total flux cleaned = 0.000829879 Jy ! Component: 3050 - total flux cleaned = 0.000941927 Jy ! Component: 3100 - total flux cleaned = 0.000964263 Jy ! Component: 3150 - total flux cleaned = 0.0010086 Jy ! Component: 3200 - total flux cleaned = 0.00105265 Jy ! Component: 3250 - total flux cleaned = 0.00111831 Jy ! Component: 3300 - total flux cleaned = 0.00116177 Jy ! Component: 3350 - total flux cleaned = 0.00114012 Jy ! Component: 3400 - total flux cleaned = 0.0011403 Jy ! Component: 3450 - total flux cleaned = 0.00120467 Jy ! Component: 3500 - total flux cleaned = 0.00120464 Jy ! Component: 3550 - total flux cleaned = 0.00124731 Jy ! Component: 3600 - total flux cleaned = 0.00120488 Jy ! Component: 3650 - total flux cleaned = 0.00124728 Jy ! Component: 3700 - total flux cleaned = 0.00124736 Jy ! Component: 3750 - total flux cleaned = 0.00124728 Jy ! Component: 3800 - total flux cleaned = 0.00120539 Jy ! Component: 3850 - total flux cleaned = 0.00122617 Jy ! Component: 3900 - total flux cleaned = 0.00114319 Jy ! Component: 3950 - total flux cleaned = 0.00118444 Jy ! Component: 4000 - total flux cleaned = 0.00116381 Jy ! Component: 4050 - total flux cleaned = 0.00120504 Jy ! Total flux subtracted in 4096 components = 0.00120507 Jy ! Clean residual min=-0.001120 max=0.001355 Jy/beam ! Clean residual mean=0.000002 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.468776 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 354 components and 0.468776 Jy ![Exited script file: muppet] wmap "J1641+2257_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.42 x 11.14 at -10.74 degrees (North through East) ! Clean map min=-0.0034003 max=0.46605 Jy/beam ! Writing clean map to FITS file: J1641+2257_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.466047 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00038006 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.244649 0.244649 0.489298 0.978597 1.95719 3.91439 7.82877 15.6575 31.3151 62.6302 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.466 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.42 x 11.14 at -10.74 degrees (North through East) ! Clean map min=-0.0034003 max=0.46605 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1641+2257_S_2017_09_26_pus_uvs.log closed on Sat May 11 13:03:17 2019