! Started logfile: J1638+6234_S_2017_10_09_pus_uvs.log on Sun May 12 13:16:23 2019 obs J1638+6234_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J1638+6234_S_2017_10_09_pus_uva.fits ! AN table 1: 235 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.611229 visibilities/baseline/integration-bin. ! Found source: J1638+6234 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 20684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1638+6234_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 452 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 689 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 497 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1428 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894135Jy sigma=0.007511 ! Fit after self-cal, rms=0.870013Jy sigma=0.007290 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=7.054 mas, bpa=-66.05 degrees ! Estimated noise=1420.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100436 Jy ! Component: 100 - total flux cleaned = 0.168985 Jy ! Total flux subtracted in 100 components = 0.168985 Jy ! Clean residual min=-0.032466 max=0.044685 Jy/beam ! Clean residual mean=0.000117 rms=0.012456 Jy/beam ! Combined flux in latest and established models = 0.168984 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 56 components and 0.168984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322599Jy sigma=0.002641 ! Fit after self-cal, rms=0.322007Jy sigma=0.002637 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.888 mas, bmaj=7.652 mas, bpa=-69.29 degrees ! Estimated noise=707.972 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135646 Jy ! Component: 100 - total flux cleaned = 0.224662 Jy ! Component: 150 - total flux cleaned = 0.283099 Jy ! Component: 200 - total flux cleaned = 0.321467 Jy ! Total flux subtracted in 200 components = 0.321467 Jy ! Clean residual min=-0.066061 max=0.066656 Jy/beam ! Clean residual mean=-0.000662 rms=0.026122 Jy/beam ! Combined flux in latest and established models = 0.490452 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 68 components and 0.490452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.252999Jy sigma=0.001985 ! Fit after self-cal, rms=0.250760Jy sigma=0.001969 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.68 FD 1.57 HN 0.95 KP 1.67 ! LA 0.83 MK 2.77 NL 2.56 OV 1.00* ! PT 0.54 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.64 FD 1.68 HN 1.19 KP 1.55 ! LA 0.85 MK 2.41 NL 1.00* OV 1.00* ! PT 0.52 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 3.48 FD 1.80 HN 0.94 KP 1.36 ! LA 0.71 MK 3.19 NL 4.08 OV 1.00* ! PT 0.51 ! ! ! Correcting IF 4. ! A total of 183 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.79 HN 1.08 KP 1.00* ! LA 0.43 MK 1.28 NL 1.00* OV 1.00* ! PT 0.78 ! ! ! Fit before self-cal, rms=0.250760Jy sigma=0.001969 ! Fit after self-cal, rms=0.469065Jy sigma=0.001164 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.812 mas, bmaj=7.932 mas, bpa=-85 degrees ! Estimated noise=948.836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673293 Jy ! Component: 100 - total flux cleaned = 0.00748595 Jy ! Component: 150 - total flux cleaned = 0.00809905 Jy ! Component: 200 - total flux cleaned = 0.00843501 Jy ! Total flux subtracted in 200 components = 0.00843501 Jy ! Clean residual min=-0.046904 max=0.046755 Jy/beam ! Clean residual mean=-0.001483 rms=0.015684 Jy/beam ! Combined flux in latest and established models = 0.498887 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 73 components and 0.498887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.467456Jy sigma=0.001164 ! Fit after self-cal, rms=0.479088Jy sigma=0.001147 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.479088Jy sigma=0.001147 ! Fit after self-cal, rms=0.508200Jy sigma=0.000845 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.713 mas, bmaj=7.912 mas, bpa=-88.85 degrees ! Estimated noise=902.075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028956 Jy ! Component: 100 - total flux cleaned = 0.00260689 Jy ! Component: 150 - total flux cleaned = 0.00233914 Jy ! Component: 200 - total flux cleaned = 0.00233317 Jy ! Total flux subtracted in 200 components = 0.00233317 Jy ! Clean residual min=-0.022260 max=0.017736 Jy/beam ! Clean residual mean=0.000099 rms=0.006536 Jy/beam ! Combined flux in latest and established models = 0.50122 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 85 components and 0.50122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.507743Jy sigma=0.000845 ! Fit after self-cal, rms=0.509449Jy sigma=0.000840 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336217 Jy ! Component: 100 - total flux cleaned = -0.000985839 Jy ! Component: 150 - total flux cleaned = -0.00121595 Jy ! Component: 200 - total flux cleaned = -0.00121718 Jy ! Total flux subtracted in 200 components = -0.00121718 Jy ! Clean residual min=-0.021513 max=0.017752 Jy/beam ! Clean residual mean=0.000092 rms=0.006476 Jy/beam ! Combined flux in latest and established models = 0.500003 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 92 components and 0.500003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.509191Jy sigma=0.000840 ! Fit after self-cal, rms=0.509205Jy sigma=0.000840 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.509205Jy sigma=0.000840 ! Fit after self-cal, rms=0.539039Jy sigma=0.000839 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.645 mas, bmaj=8.046 mas, bpa=-88.26 degrees ! Estimated noise=909.716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206181 Jy ! Component: 100 - total flux cleaned = 0.00219305 Jy ! Component: 150 - total flux cleaned = 0.00207067 Jy ! Component: 200 - total flux cleaned = 0.00195369 Jy ! Total flux subtracted in 200 components = 0.00195369 Jy ! Clean residual min=-0.021436 max=0.017990 Jy/beam ! Clean residual mean=0.000100 rms=0.006505 Jy/beam ! Combined flux in latest and established models = 0.501956 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 94 components and 0.501956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.538726Jy sigma=0.000839 ! Fit after self-cal, rms=0.538862Jy sigma=0.000839 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.33127e-05 Jy ! Component: 100 - total flux cleaned = -0.000191755 Jy ! Component: 150 - total flux cleaned = -0.000305117 Jy ! Component: 200 - total flux cleaned = -0.000408365 Jy ! Total flux subtracted in 200 components = -0.000408365 Jy ! Clean residual min=-0.021263 max=0.018196 Jy/beam ! Clean residual mean=0.000100 rms=0.006501 Jy/beam ! Combined flux in latest and established models = 0.501548 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 97 components and 0.501548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.538646Jy sigma=0.000839 ! Fit after self-cal, rms=0.538665Jy sigma=0.000838 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.538665Jy sigma=0.000838 ! Fit after self-cal, rms=0.569452Jy sigma=0.000838 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.182 mas, bmaj=15.01 mas, bpa=66.73 degrees ! Estimated noise=1000.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273687 Jy ! Component: 100 - total flux cleaned = 0.00249191 Jy ! Component: 150 - total flux cleaned = 0.00239316 Jy ! Component: 200 - total flux cleaned = 0.00230216 Jy ! Total flux subtracted in 200 components = 0.00230216 Jy ! Clean residual min=-0.032360 max=0.027277 Jy/beam ! Clean residual mean=0.000179 rms=0.010201 Jy/beam ! Combined flux in latest and established models = 0.50385 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 100 components and 0.50385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569297Jy sigma=0.000840 ! Fit after self-cal, rms=0.569432Jy sigma=0.000839 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183633 Jy ! Component: 100 - total flux cleaned = -5.57965e-05 Jy ! Component: 150 - total flux cleaned = -0.000354315 Jy ! Component: 200 - total flux cleaned = -0.000444581 Jy ! Total flux subtracted in 200 components = -0.000444581 Jy ! Clean residual min=-0.032173 max=0.027243 Jy/beam ! Clean residual mean=0.000178 rms=0.010200 Jy/beam ! Combined flux in latest and established models = 0.503406 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 100 components and 0.503405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569312Jy sigma=0.000840 ! Fit after self-cal, rms=0.569539Jy sigma=0.000840 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.658 mas, bmaj=8.13 mas, bpa=-88.66 degrees ! Estimated noise=924.522 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.658 x 8.13 at -88.66 degrees (North through East) ! Clean map min=-0.021905 max=0.17478 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=6.792 mas, bpa=-78.64 degrees ! Estimated noise=2074.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145317 Jy ! Component: 100 - total flux cleaned = 0.24107 Jy ! Component: 150 - total flux cleaned = 0.309291 Jy ! Component: 200 - total flux cleaned = 0.358903 Jy ! Total flux subtracted in 200 components = 0.358903 Jy ! Clean residual min=-0.027535 max=0.030653 Jy/beam ! Clean residual mean=0.000177 rms=0.008247 Jy/beam ! Combined flux in latest and established models = 0.358903 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.358903 Jy ! Inverting map and beam ! Estimated beam: bmin=4.658 mas, bmaj=8.13 mas, bpa=-88.66 degrees ! Estimated noise=924.522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0641423 Jy ! Component: 100 - total flux cleaned = 0.098434 Jy ! Component: 150 - total flux cleaned = 0.116931 Jy ! Component: 200 - total flux cleaned = 0.126912 Jy ! Total flux subtracted in 200 components = 0.126912 Jy ! Clean residual min=-0.023309 max=0.020675 Jy/beam ! Clean residual mean=0.000085 rms=0.006958 Jy/beam ! Combined flux in latest and established models = 0.485815 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 67 components and 0.485815 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.182 mas, bmaj=15.01 mas, bpa=66.73 degrees ! Estimated noise=1000.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00906925 Jy ! Component: 100 - total flux cleaned = 0.0107515 Jy ! Component: 150 - total flux cleaned = 0.0109904 Jy ! Component: 200 - total flux cleaned = 0.0113127 Jy ! Total flux subtracted in 200 components = 0.0113127 Jy ! Clean residual min=-0.033553 max=0.027679 Jy/beam ! Clean residual mean=0.000170 rms=0.010342 Jy/beam ! Combined flux in latest and established models = 0.497128 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196106 Jy ! Component: 100 - total flux cleaned = 0.00037816 Jy ! Component: 150 - total flux cleaned = 0.000547533 Jy ! Component: 200 - total flux cleaned = 0.000629931 Jy ! Total flux subtracted in 200 components = 0.000629931 Jy ! Clean residual min=-0.033598 max=0.027640 Jy/beam ! Clean residual mean=0.000171 rms=0.010329 Jy/beam ! Combined flux in latest and established models = 0.497758 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.497758 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.658 mas, bmaj=8.13 mas, bpa=-88.66 degrees ! Estimated noise=924.522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011904 Jy ! Component: 100 - total flux cleaned = -0.00145544 Jy ! Component: 150 - total flux cleaned = -0.0016776 Jy ! Component: 200 - total flux cleaned = -0.00167514 Jy ! Total flux subtracted in 200 components = -0.00167514 Jy ! Clean residual min=-0.022929 max=0.020070 Jy/beam ! Clean residual mean=0.000094 rms=0.006767 Jy/beam ! Combined flux in latest and established models = 0.496083 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 81 components and 0.496083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.568747Jy sigma=0.000845 ! Fit after self-cal, rms=0.568129Jy sigma=0.000843 wmodel J1638+6234_S_2017_10_09_pus_map.mod ! Writing 81 model components to file: J1638+6234_S_2017_10_09_pus_map.mod wobs J1638+6234_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J1638+6234_S_2017_10_09_pus_uvs.fits wwins J1638+6234_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J1638+6234_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0084502 Jy ! Component: 100 - total flux cleaned = -0.0131628 Jy ! Component: 150 - total flux cleaned = -0.0165575 Jy ! Component: 200 - total flux cleaned = -0.0191588 Jy ! Component: 250 - total flux cleaned = -0.021973 Jy ! Component: 300 - total flux cleaned = -0.0255831 Jy ! Component: 350 - total flux cleaned = -0.0296616 Jy ! Component: 400 - total flux cleaned = -0.0327743 Jy ! Component: 450 - total flux cleaned = -0.035256 Jy ! Component: 500 - total flux cleaned = -0.0382079 Jy ! Component: 550 - total flux cleaned = -0.0405677 Jy ! Component: 600 - total flux cleaned = -0.0421131 Jy ! Component: 650 - total flux cleaned = -0.0443853 Jy ! Component: 700 - total flux cleaned = -0.0458657 Jy ! Component: 750 - total flux cleaned = -0.0473236 Jy ! Component: 800 - total flux cleaned = -0.048755 Jy ! Component: 850 - total flux cleaned = -0.0501658 Jy ! Component: 900 - total flux cleaned = -0.0520123 Jy ! Component: 950 - total flux cleaned = -0.0531535 Jy ! Component: 1000 - total flux cleaned = -0.0549482 Jy ! Component: 1050 - total flux cleaned = -0.0560517 Jy ! Component: 1100 - total flux cleaned = -0.0569213 Jy ! Component: 1150 - total flux cleaned = -0.0586384 Jy ! Component: 1200 - total flux cleaned = -0.0596937 Jy ! Component: 1250 - total flux cleaned = -0.0605279 Jy ! Component: 1300 - total flux cleaned = -0.0617661 Jy ! Component: 1350 - total flux cleaned = -0.0631875 Jy ! Component: 1400 - total flux cleaned = -0.0643902 Jy ! Component: 1450 - total flux cleaned = -0.0651786 Jy ! Component: 1500 - total flux cleaned = -0.0665464 Jy ! Component: 1550 - total flux cleaned = -0.0673166 Jy ! Component: 1600 - total flux cleaned = -0.0686513 Jy ! Component: 1650 - total flux cleaned = -0.0695946 Jy ! Component: 1700 - total flux cleaned = -0.0705261 Jy ! Component: 1750 - total flux cleaned = -0.0716311 Jy ! Component: 1800 - total flux cleaned = -0.0725411 Jy ! Component: 1850 - total flux cleaned = -0.073082 Jy ! Component: 1900 - total flux cleaned = -0.0739725 Jy ! Component: 1950 - total flux cleaned = -0.0741475 Jy ! Component: 2000 - total flux cleaned = -0.0744953 Jy ! Component: 2050 - total flux cleaned = -0.0746654 Jy ! Component: 2100 - total flux cleaned = -0.0750051 Jy ! Component: 2150 - total flux cleaned = -0.0753411 Jy ! Component: 2200 - total flux cleaned = -0.0750083 Jy ! Component: 2250 - total flux cleaned = -0.075176 Jy ! Component: 2300 - total flux cleaned = -0.075179 Jy ! Component: 2350 - total flux cleaned = -0.0756651 Jy ! Component: 2400 - total flux cleaned = -0.0750206 Jy ! Component: 2450 - total flux cleaned = -0.0750208 Jy ! Component: 2500 - total flux cleaned = -0.0753374 Jy ! Component: 2550 - total flux cleaned = -0.0748674 Jy ! Component: 2600 - total flux cleaned = -0.074247 Jy ! Component: 2650 - total flux cleaned = -0.0736303 Jy ! Component: 2700 - total flux cleaned = -0.0733239 Jy ! Component: 2750 - total flux cleaned = -0.0733237 Jy ! Component: 2800 - total flux cleaned = -0.0728685 Jy ! Component: 2850 - total flux cleaned = -0.0724163 Jy ! Component: 2900 - total flux cleaned = -0.0719669 Jy ! Component: 2950 - total flux cleaned = -0.0709271 Jy ! Component: 3000 - total flux cleaned = -0.0703368 Jy ! Component: 3050 - total flux cleaned = -0.0701891 Jy ! Component: 3100 - total flux cleaned = -0.06975 Jy ! Component: 3150 - total flux cleaned = -0.0691668 Jy ! Component: 3200 - total flux cleaned = -0.0684414 Jy ! Component: 3250 - total flux cleaned = -0.0678638 Jy ! Component: 3300 - total flux cleaned = -0.0671426 Jy ! Component: 3350 - total flux cleaned = -0.0667106 Jy ! Component: 3400 - total flux cleaned = -0.0659927 Jy ! Component: 3450 - total flux cleaned = -0.0651326 Jy ! Component: 3500 - total flux cleaned = -0.0644181 Jy ! Component: 3550 - total flux cleaned = -0.0638463 Jy ! Component: 3600 - total flux cleaned = -0.0629911 Jy ! Component: 3650 - total flux cleaned = -0.0622794 Jy ! Component: 3700 - total flux cleaned = -0.0615675 Jy ! Component: 3750 - total flux cleaned = -0.0608579 Jy ! Component: 3800 - total flux cleaned = -0.0602904 Jy ! Component: 3850 - total flux cleaned = -0.0597233 Jy ! Component: 3900 - total flux cleaned = -0.0588734 Jy ! Component: 3950 - total flux cleaned = -0.0580234 Jy ! Component: 4000 - total flux cleaned = -0.0573144 Jy ! Component: 4050 - total flux cleaned = -0.0566056 Jy ! Total flux subtracted in 4096 components = -0.0557548 Jy ! Clean residual min=-0.007810 max=0.008016 Jy/beam ! Clean residual mean=-0.000118 rms=0.002941 Jy/beam ! Combined flux in latest and established models = 0.440328 Jy keep ! Adding 482 model components to the UV plane model. ! The established model now contains 563 components and 0.440328 Jy ![Exited script file: muppet] wmap "J1638+6234_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.658 x 8.13 at -88.66 degrees (North through East) ! Clean map min=-0.021435 max=0.18812 Jy/beam ! Writing clean map to FITS file: J1638+6234_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.18812 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00283588 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.52245 4.52245 9.0449 18.0898 36.1796 72.3592 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0085 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.188 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.658 x 8.13 at -88.66 degrees (North through East) ! Clean map min=-0.021435 max=0.18812 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J1638+6234_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:16:28 2019